A concise review on drug-loaded electrospun nanofibres as promising wound dressings

GO/AgNW aided sustained release of ciprofloxacin loaded in Starch/PVA nanocomposite mats for wound dressings application

Compared to conventional bandages, which do not meet all wound care requirements, nanofiber wound dressings could provide a potentially excellent environment for healing. In the present research, nanocomposite membrane based on starch (St) - polyvinyl alcohol (PVA) nanofibers containing ciprofloxacin antibiotic drug loaded on graphene oxide‑silver nanowire (GO-AgNWs) hybrid nanoparticles is produced by electrospinning process. Morphological studies showed that the length and diameter of silver nanowires are 21 ± 9.17 μm and 82 ± 10.52 nm, respectively. The contact angle of 57.1° due to the hydrophilic nature of nanofibers, also the swelling degree of 679.51 % and, the water vapor permeability of 2627 ± 56 (g/m2.day) can be expressed as a confirmation of the ability of this wound dressing to manage secretions around the wound. In evaluating the antibacterial activity of these nanocomposite membranes against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus bacteria, the most potent antibacterial effect is in the case of nanofibers containing a high percentage of starch and nanoparticles carrying ciprofloxacin; with non-growth halos of 47.58 mm and 22.06 mm was recorded. The release of ciprofloxacin drug in vitro was reported to be 61.69 % during 24 h, and the final release rate was 82.17 %. Despite the biocompatibility and cell viability of 97.74 % and the biodegradability rate of 28.51 %, the StP-GOAgNWCip nanocomposite membrane can be introduced as a suitable candidate for wound dressing.

Evaluation of the wound healing efficacy of new antibacterial polymeric nanofiber based on polyethylene oxide coated with copper nanoparticles and defensin peptide: An in-vitro to in-vivo assessment

Objective

Today, designing nanofibers with antibacterial properties using electrospinning technology is one of the attractive approaches for wound healing.

Methods

& analysis: This study aims to fabricate a nanocomposite from polyethylene oxide (PEO) coated with copper nanoparticles (NPs) and defensin peptide with wound healing and antimicrobial properties in different ratios of CuNPs/defensin (2/0 mg), (1.5/0.5 mg), and (1/1 mg) in the fixed contain polymer (98 mg). Then, the nanofiber properties were investigated by SEM, tensile, DSC, and BET analysis. Also, the antibacterial properties against S. aureus and E. coli, antioxidant, and in-vivo wound healing effects and histological analysis of the designed nanocomposites were evaluated in rat models.

Results

Our SEM images showed that CuNPs and defensin were properly coated on the PEO surface. According to the tensile, DSC, and antibacterial analysis results, the most appropriate feature was related to CuNPs/defensin (1.5/0.5 mg), with maximum elasticity, heat resistance, and antibacterial activity. Furthermore, the designed nanocomposites showed the best performance as a wound closure agent by increasing dermis and epidermis volume density, stimulating fibroblast cells and collagen fiber production, and improving skin vessels.

Conclusion

According to our results, PEO nanofibers loaded with CuNPs and defensin have the best potential for wound healing, and they can be used as antibacterial materials in the textile, drug, and medical industries.

Tailoring polyethylene oxide-modified cross-linked chitosan/PVA nanofibrous membranes: Burn dressing scaffold developed for mupirocin release

In emergency treatment research, the focus on chitosan-based products for wound healing has been consistent. This study specifically explores a dressing made by mixing chitosan (CS) and poly (vinyl alcohol) PVA. Using electrospinning technology, nanofiber membranes of CS and PVA are created with the assistance of non-toxic and hydrophilic polyethylene oxide (PEO). The outcome is a new nanofibrous membrane loaded with mupirocin, designed for healing burn wounds. The study delves into the influence of PVA, CS, and PEO concentrations on the structural and chemical characteristics of the mats. This comprehensive exploration involves techniques such as Scanning Electron Microscope (SEM), Atomic Force Microscopy (AFM) imaging, Fourier Transform Infrared Spectrometry (FTIR analysis), and Contact angle measurements. Additionally, the research evaluates the antibacterial performance and biomedical behavior of the developed scaffolds. PEO proves beneficial in the electrospinning process, contributing to smoother fibers. Meanwhile, the addition of CS and mupirocin leads to formation of the thinner nanofibers (251 ± 5 μm and 263 ± 4 μm, respectively) and scaffolds with higher swelling (up to ∼3.5 times at 90 min). Notably, the (MTT) assay confirms the non-cytotoxicity of the fabricated nanofibers, with proliferations exceeding ∼85% for all samples. The crosslinked samples released the drug more slowly than the non-crosslinked dressings, with 80% of the scaffolds releasing the drug within 24 h. The in-vivo investigations suggested that the drug-containing scaffolds performed reliably and showed promise as a medical dressing for treating burn wounds.

A bilayer mupirocin/bupivacaine-loaded wound dressing based on chitosan/poly (vinyl alcohol) nanofibrous mat: Preparation, characterization, and controlled drug release

An infected skin wound caused by external injury remains a serious challenge. Electrospun drug-loaded nanofibers with antibacterial properties based on biopolymers have been widely explored for wound healing. In this study, the double-layer CS/PVA/mupirocin (CPM) + CS/PVA/bupivacaine (CPB) mats were prepared by electrospinning method (20 % polymer weight) and then crosslinked with glutaraldehyde (GA) to optimize the water-resistant and biodegradation properties for wound dressing applications. The morphology of mats was characterized as defect-free and interconnected nanofibers by Scanning Electron Microscope (SEM) and Atomic Force Microscopy (AFM). Fourier Transform Infrared Spectrometry (FTIR) analysis also assessed the chemical structural properties. The porosity, surface wettability, and swelling degree of the dual-drug loaded mats were improved by about 20 %, 12°, and 200 % of the CS/PVA sample to provide a moist environment for efficient wound breathing and repairing. This highly porous mat facilitated the wound exudates absorption and air permeability excellently, reducing the chance of bacterial infections by inhibiting the growth of S. aureus bacterial colonies with a zone of 71.3 mm diameter. In vitro drug release results showed a high-burst release of 80 % and a continuous release profile for bupivacaine and mupirocin, respectively. MTT assay and in vivo tests indicated >90 % of cell viability and improvement in cell proliferation. It triply accelerated wound closure compared to the control group, reaching nearly full closure after 21 days as a potential clinical wound treatment.

Cell-based wound dressing: Bilayered PCL/gelatin nanofibers-alginate/collagen hydrogel scaffold loaded with mesenchymal stem cells

Wound dressing is applied to promote the healing process, wound protection, and additionally regeneration of injured skin. In this study, a bilayer scaffold composed of a hydrogel and nanofibers was fabricated to improve the regeneration of injured skin. To this end, polycaprolactone/gelatin (PCL/Gel) nanofibers were electrospun directly on the prepared collagen/alginate (Col/Alg) hydrogel. The bilayer scaffold was characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR), mechanical properties, and swelling/degradation time. Cytotoxicity assays were evaluated using MTT assay. Then, the nanofiber and bilayer scaffolds were seeded with Adipose-derived stem cells (ADSCs). ADSCs were isolated from rat adipose tissue and analyzed using flow cytometry, in advance. Full-thickness wounds on the backs of rats were dressed with ADSCs-seeded bilayer scaffolds and nanofibers. Histopathological evaluations were performed after 14 and 21 days using H&E (hematoxylin and eosin) staining. The results indicated that re-epithelialization, angiogenesis, and collagen remodeling were enhanced in ADSCs-seeded bilayer scaffolds and nanofibers in comparison with the control group. In conclusion, the best re-epithelialization, collagen organization, neovascularization, and low presence of inflammation in the wound area were observed in the ADSCs-seeded bilayer scaffolds.

Wound-Healing Effects of Curcumin and Its Nanoformulations: A Comprehensive Review

Wound healing is an intricate process of tissue repair or remodeling that occurs in response to injury. Plants and plant-derived bioactive constituents are well explored in the treatment of various types of wounds. Curcumin is a natural polyphenolic substance that has been used since ancient times in Ayurveda for its healing properties, as it reduces inflammation and acts on several healing stages. Several research studies for curcumin delivery at the wound site reported the effectiveness of curcumin in eradicating reactive oxygen species and its ability to enhance the deposition of collagen, granulation tissue formation, and finally, expedite wound contraction. Curcumin has been widely investigated for its wound healing potential but its lower solubility and rapid metabolism, in addition to its shorter plasma half-life, have limited its applications in wound healing. As nanotechnology has proven to be an effective technique to accelerate wound healing by stimulating appropriate mobility through various healing phases, curcumin-loaded nanocarriers are used for targeted delivery at the wound sites. This review highlights the potential of curcumin and its nanoformulations, such as liposomes, nanoparticles, and nano-emulsions, etc. in wound healing. This paper emphasizes the numerous biomedical applications of curcumin which collectively prepare a base for its antibiofilm and wound-healing action.

Nanomaterials-based drug delivery approaches for wound healing

Abstract:

Wound healing is a complex and dynamic process that requires intricate synchronization between multiple cell types within appropriate extracellular microenvironment. Wound healing process involves four overlapping phases in a precisely regulated manner, consisting of hemostasis, inflammation, proliferation, and maturation. For an effective wound healing all four phases must follow in a sequential pattern within a time frame. Several factors might interfere with one or more of these phases in healing process, thus causing improper or impaired wound healing resulting in non-healing chronic wounds. The complications associated with chronic non-healing wounds, along with the limitations of existing wound therapies, have led to the development and emergence of novel and innovative therapeutic interventions. Nanotechnology presents unique and alternative approaches to accelerate the healing of chronic wounds by the interaction of nanomaterials during different phases of wound healing. This review focuses on recent innovative nanotechnology-based strategies for wound healing and tissue regeneration based on nanomaterials, including nanoparticles, nanocomposites and scaffolds. The efficacy of the intrinsic therapeutic potential of nanomaterials (including silver, gold, zinc oxide, copper, cerium oxide, etc.) and the ability of nanomaterials as carriers (liposomes, hydrogels, polymeric nanomaterials, nanofibers) as therapeutic agents associated with wound-healing applications have also been addressed. The significance of these nanomaterial-based therapeutic interventions for wound healing needs to be highlighted to engage researchers and clinicians towards this new and exciting area of bio-nanoscience. We believe that these recent developments will offer researchers an updated source on the use of nanomaterials as an advanced approach to improve wound healing.

3D Bio-printing For Skin Tissue Regeneration: Hopes and Hurdles

Abstract:

For many years, discovering the appropriate methods for the treatment of skin irritation has been challenging for specialists and researchers. Bio-printing can be extensively applied to address the demand for proper skin substitutes to improve skin damage. Nowadays, to make more effective bio-mimicking of natural skin, many research teams have developed cell-seeded bio-inks for bioprinting of skin substitutes. These loaded cells can be single or co-cultured in these structures. The present review gives a comprehensive overview of the methods, substantial parameters of skin bioprinting, examples of in vitro and in vivo studies, and current advances and challenges for skin tissue engineering.

Microfluidic-based functional materials: new prospects for wound healing and beyond

Microfluidics has been applied to fabricate high-performance functional materials contributing to all physiological stages of wound healing. The advances of microfluidic-based functional materials for wound healing have been summarized.

Metallic Ions Encapsulated in Electrospun Nanofiber for Antibacterial and Angiogenesis Function to Promote Wound Repair

Electrospun nanofiber is an attractive biomaterial for skin tissue engineering because it mimics the natural fibrous extracellular matrix structure and creates a physical structure suitable for skin tissue regeneration. However, endowing the nanofibrous membranes with antibacterial and angiogenesis functions needs to be explored. In the current study, we aimed to fabricate gelatin/polycaprolactone (GT/PCL) (GT/PCL-Ag-Mg) nanofibers loaded with silver (Ag) and magnesium (Mg) ions for antibacterial activity and pro-angiogenesis function for wound repair. The fabricated GT/PCL membranes had a nanofibrous structure with random arrangement and achieved sustained release of Ag and Mg ions. In vitro results indicated that the GT/PCL-Ag-Mg membranes presented satisfactory cytocompatibility with cell survival and proliferation. In addition, the membranes with Ag demonstrated good antibacterial capacity to both gram-positive and gram-negative bacteria, and the Mg released from the membranes promoted the tube formation of vascular endothelial cells. Furthermore, in vivo results demonstrated that the GT/PCL-Ag-Mg membrane presented an accelerated wound healing process compared with GT/PCL membranes incorporated with either Ag or Mg ions and pure GT/PCL alone. Superior epidermis formation, vascularization, and collagen deposition were also observed in GT/PCL-Ag-Mg membrane compared with the other membranes. In conclusion, a multifunctional GT/PCL-Ag-Mg membrane was fabricated with anti-infection and pro-angiogenesis functions, serving as a potential metallic ion-based therapeutic platform for applications in wound repair.

Nanofibers as drug-delivery systems for antimicrobial peptides

Microbial infections are a major worldwide public health problem because a number of microorganisms can show drug resistance. Antimicrobial peptides (AMPs) are small biomolecules that present antimicrobial and immunomodulatory activities. Despite their great potential, there are still many barriers to the formulation of these molecules. In this context, nanotechnological approaches such as nanofibers are candidate drug-delivery systems for AMP formulations. These nanomaterials have a large contact surface and may carry several AMPs (single or multilayer), directing them to specific targets. Thus, this review describes the main advances related to the use of nanofibers as drug-delivery systems for AMPs. These strategies can contribute directly to the design of new multifunctional wound dressings, coatings for prostheses, and tissue engineering applications.

Evaluation of wound healing efficiency of vancomycin-loaded electrospun chitosan/poly ethylene oxide nanofibers in full thickness wound model of rat

Electrospun hybrid nanofibers have been extensively regarded as drug carriers. This study tries to introduce a nano fibrous wound dressing as a new strategy for a topical drug-delivery system. The vancomycin (VCM)-loaded hybrid chitosan/poly ethylene oxide (CH/PEO) nanofibers were fabricated by the blend-electrospinning process. Morphological, mechanical, chemical, and biological properties of nanofibers were examined by SEM, FTIR, release profile study, tensile assay, Alamar Blue cytotoxicity evaluation, and antibacterial activity assay. In vivo wound healing activity of hybrid CH/PEO/VCM nanofibers was evaluated in full-thickness skin wounds of rats. The hybrid CH/PEO/VCM nanofibers were successfully fabricated in a nanometer. The CH/PEO/VCM 2.5% had higher Young's Modulus, better tensile strength, smaller fiber diameter with sustained-release profiles compared to CH/PEO/VCM 5%. All nanofibers did not show any significant cytotoxicity (P < 0.05) on the normal fibroblast cells. Also, VCM-load hybrid CH/PEO nanofibers successfully inhibited bacterial growth. The wound area in the rats treated with CH/PEO/VCM 2.5% was less than CH/PEO/VCM 5% treated group. According to histological evaluation, the CH/PEO/VCM 2.5% group showed the fastest wound healing than other treatment groups. Results of this study proposed that CH/PEO/VCM nanofibers could promote the wound healing process by reducing the side effects of VCM as a topical antimicrobial agent.

Electrospun Asymmetric Membranes as Promising Wound Dressings: A Review

Despite all the efforts that have been done up to now, the currently available wound dressings are still unable to fully re-establish all the structural and functional properties of the native skin. To overcome this situation, researchers from the tissue engineering area have been developing new wound dressings (hydrogels, films, sponges, membranes) aiming to mimic all the features of native skin. Among them, asymmetric membranes emerged as a promising solution since they reproduce both epidermal and dermal skin layers. Wet or dry/wet phase inversion, scCO2-assisted phase inversion, and electrospinning have been the most used techniques to produce such a type of membranes. Among them, the electrospinning technique, due to its versatility, allows the development of multifunctional dressings, using natural and/or synthetic polymers, which resemble the extracellular matrix of native skin as well as address the specific requirements of each skin layer. Moreover, various therapeutic or antimicrobial agents have been loaded within nanofibers to further improve the wound healing performance of these membranes. This review article provides an overview of the application of asymmetric electrospun membranes as wound dressings displaying antibacterial activity and as delivery systems of biomolecules that act as wound healing enhancers.

Thread Size and Polymer Composition of 3D Printed and Electrospun Wound Dressings Affect Wound Healing Outcomes in an Excisional Wound Rat Model

Thread size and polymer composition are critical properties to consider for achieving a positive healing outcome with a wound dressing. Three-dimensional (3D) printed scaffolds and electrospun mats both offer distinct advantages as replaceable wound dressings. This research aims to determine if the thread size and polymer compositions of the scaffolds affect skin wound healing outcomes, an aspect that has not been adequately explored. Using a modular polymer platform, four polyester direct-write 3D printed scaffolds and electrospun mats were fabricated into wound dressings. The dressings were applied to splinted, full thickness skin wounds in an excisional wound rat model and evaluated against control wounds to which no dressing was applied. Wound closure rates and reduction of the wound bed width were not affected by the thread size or polymer composition. However, epidermal thickness was larger in wounds treated with electrospun dressings and was slightly affected by the polymer composition. Two of the four tested polymer compositions lead to delayed reorganization of granulation tissues. Moreover, enhanced angiogenesis was seen in wounds treated with 3D printed dressings compared to those treated with electrospun dressings. The results from this study can be used to inform the choice of dressing architecture and polymer compositions to achieve positive wound healing outcomes.

Production of a novel poly(ɛ-caprolactone)-methylcellulose electrospun wound dressing by incorporating bioactive glass and Manuka honey

Wound dressings produced by electrospinning exhibit a fibrous structure close to the one of the extracellular matrix of the skin. In this article, electrospinning was used to fabricate fiber mats based on the well-known biopolymers poly(ɛ-caprolactone) (PCL) and methylcellulose (MC) using benign solvents. The blend fiber mats were cross-linked using Manuka honey and additionally used as a biodegradable platform to deliver bioactive glass particles. It was hypothesized that a dual therapeutic effect can be achieved by combining Manuka honey and bioactive glass. Morphological and chemical examinations confirmed the successful production of submicrometric PCL-MC fiber mats containing Manuka honey and bioactive glass particles. The multifunctional fiber mats exhibited improved wettability and suitable mechanical properties (ultimate tensile strength of 3-5 MPa). By performing dissolution tests using simulated body fluid, the improved bioactivity of the fiber mats by the addition of bioactive glass was confirmed. Additionally, cell biology tests using human dermal fibroblasts and human keratinocytes-like HaCaT cells showed the potential of the fabricated composite fiber mats to be used as wound dressing, specially due to the ability to support wound closure influenced by the presence of bioactive glass. Moreover, based on the results of the antibacterial tests, it is apparent that an optimization of the electrospun fiber mats is required to develop suitable wound dressing for the treatment of infected wounds.