Zinc-based metal-organic frameworks as nontoxic and biodegradable platforms for biomedical applications: review study

Biosensors for metastatic cancer cell detection

Early detection and effective cancer treatment are critical to improving metastatic cancer cell diagnosis and management today. In particular, accurate qualitative diagnosis of metastatic cancer cell represents an important step in the diagnosis of cancer. Today, biosensors have been widely developed due to the daily need to measure different chemical and biological species. Biosensors are utilized to quantify chemical and biological phenomena by generating signals that are directly proportional to the quantity of the analyte present in the reaction. Biosensors are widely used in disease control, drug delivery, infection detection, detection of pathogenic microorganisms, and markers that indicate a specific disease in the body. These devices have been especially popular in the field of metastatic cancer cell diagnosis and treatment due to their portability, high sensitivity, high specificity, ease of use and short response time. This article examines biosensors for metastatic cancer cells. It also studies metastatic cancer cells and the mechanism of metastasis. Finally, the function of biosensors and biomarkers in metastatic cancer cells is investigated.

Amyloid detection in neurodegenerative diseases using MOFs

Neurodegenerative diseases (amyloid diseases such as Alzheimer's and Parkinson's), stemming from protein misfolding and aggregation, encompass a spectrum of disorders with severe systemic implications. Timely detection is pivotal in managing these diseases owing to their significant impact on organ function and high mortality rates. The diverse array of amyloid disorders, spanning localized and systemic manifestations, underscores the complexity of these conditions and highlights the need for advanced detection methods. Traditional approaches have focused on identifying biomarkers using imaging techniques (PET and MRI) or invasive procedures. However, recent efforts have focused on the use of metal-organic frameworks (MOFs), a versatile class of materials known for their unique properties, in revolutionizing amyloid disease detection. The high porosity, customizable structures, and biocompatibility of MOFs enable their integration with biomolecules, laying the groundwork for highly sensitive and specific biosensors. These sensors have been employed using electrochemical and photophysical techniques that target amyloid species under neurodegenerative conditions. The adaptability of MOFs allows for the precise detection and quantification of amyloid proteins, offering potential advancements in early diagnosis and disease management. This review article delves into how MOFs contribute to detecting amyloid diseases by categorizing their uses based on different sensing methods, such as electrochemical (EC), electrochemiluminescence (ECL), fluorescence, Förster resonance energy transfer (FRET), up-conversion luminescence resonance energy transfer (ULRET), and photoelectrochemical (PEC) sensing. The drawbacks of MOF biosensors and the challenges encountered in the field are also briefly explored from our perspective.

Unveiling high-power and high-safety lithium-ion battery separator based on interlayer of ZIF-67/cellulose nanofiber with electrospun poly(vinyl alcohol)/melamine nonwoven membranes

Due to the poor thermal stability of conventional separators, lithium-ion batteries require a suitable separator to maintain system safety for long-term cycling performance. It must have high porosity, superior electrolyte uptake ability, and good ion-conducting properties even at high temperatures. In this work, we demonstrate a novel composite membrane based on sandwiching of zeolitic imidazole frameworks-67 decorated cellulose acetate nanofibers (ZIF-67@CA) with electrospun poly(vinyl alcohol)/melamine (denoted as PVAM) nonwoven membranes. The as-prepared sandwich-type membranes are called PVAM/x%ZIF-67@CA/PVAM. The middle layer of composite membranes is primarily filled with different weight percentages of ZIF-67 nanoparticles (x = 5, 15, and 25 wt%), which both reduces the non-uniform porous structure of CA and increases its thermal stability. Therefore, our sandwich-type PVAM/x%ZIF-67@CA/PVAM membrane exhibits a higher thermal shrinkage effect at 200 °C than the commercial polyethylene (PE) separator. Due to its high electrolyte uptake (646.8%) and porosity (85.2%), PVAM/15%ZIF-67@CA/PVAM membrane achieved high ionic conductivity of 1.46 × 10-3 S cm-1 at 70 °C, as compared to the commercial PE separator (ca. 6.01 × 10-4 S cm-1 at 70 °C). Besides, the cell with PVAM/15%ZIF-67@CA/PVAM membrane shows an excellent discharge capacity of about 167.5 mAh g-1after 100 cycles at a 1C rate with a capacity retention of 90.3%. The ZIF-67 fillers in our sandwich-type composite membrane strongly attract anions (PF6-) through Lewis' acid-base interaction, allowing uniform Li+ ion transport and suppressing Li dendrites. As a result, we found that the PVAM/15%ZIF-67@CA/PVAM composite nonwoven membrane is applicable to high-power, high-safety lithium-ion battery systems that can be used in electric vehicles (EVs).

One-Dimensional and Two-Dimensional Zn(II) Coordination Polymers with Ditopic Imidazo[1,5-a]pyridine: A Structural and Computational Study

Zn(II) coordination polymers are being increasingly studied for their stability and properties. Similarly, there is a growing interest in imidazo[1,5-a]pyridine derivatives, which show great potential in luminescence and pharmaceutical applications. In this work, we successfully synthesized and crystallized three new coordination polymers, using Zn(II) as the metallic node, dicarboxylic acids of different length and nature as linkers, and a linear ditopic imidazo[1,5-a]pyridine derivative, to explore the role of this molecule as a propagator of the dimensionality of the structure or as an ancillary ligand. Our work demonstrates the structural capability of imidazo[1,5-a]pyridines in an unexplored domain for this family of ligands. Notably, we observed a pronounced ability of this heterocyclic scaffold to establish π···π interactions in the solid state. The supramolecular π-stacked assemblies were theoretically analyzed using DFT calculations based on model structures.

Performance of Zr-Based Metal-Organic Framework Materials as In Vitro Systems for the Oral Delivery of Captopril and Ibuprofen

Zr-based metal-organic framework materials (Zr-MOFs) with increased specific surface area and pore volume were obtained using chemical (two materials, Zr-MOF1 and Zr-MOF3) and solvothermal (Zr-MOF2) synthesis methods and investigated via FT-IR spectroscopy, TGA, SANS, PXRD, and SEM methods. The difference between Zr-MOF1 and Zr-MOF3 lies in the addition of reactants during synthesis. Nitrogen porosimetry data indicated the presence of pores with average dimensions of ~4 nm; using SANS, the average size of the Zr-MOF nanocrystals was suggested to be approximately 30 nm. The patterns obtained through PXRD were characterized by similar features that point to well-crystallized phases specific for the UIO-66 type materials; SEM also revealed that the materials were composed of small and agglomerate crystals. Thermogravimetric analysis revealed that both materials had approximately two linker deficiencies per Zr6 formula unit. Captopril and ibuprofen loading and release experiments in different buffered solutions were performed using the obtained Zr-based metal-organic frameworks as drug carriers envisaged for controlled drug release. The carriers demonstrated enhanced drug-loading capacity and showed relatively good results in drug delivery. The cumulative percentage of drug release in phosphate-buffered solution at pH 7.4 was higher than that in buffered solution at pH 1.2. The release rate could be controlled by changing the pH of the releasing solution. Different captopril release behaviors were observed when the experiments were performed using a permeable dialysis membrane.

Biosynthesis of ZnO and TiO2 nanoparticles using Ipomoea carnea leaf extract and its effect on black carrot (Daucus carota L.) cv. Pusa Asita

Nano fertilizers (NFs) are now becoming an important tool for plant nutrient management having capabilities to improve soil fertility, crop productivity and quality of agricultural products. Since, they are needed in very small amount, thus, reduces cost of crop production. Among different essential or beneficial plant nutrients, Zn and Ti are important micro nutrients having number of beneficial effect on crop growth, yield, quality and post harvest life. Present experiment was carried out to prepare ZnO and TiO2 nanoparticles (NPs) through green technology by using aqueous extract of Ipomoea carnea (morning glory) leaves. In order to investigate size, morphology, composition, and stability of selected NPs, the detailed characterization was carried out using UV-visible spectroscopy, FTIR, HRTEM, EDX, BET, X-ray diffraction, XPS and particle size distribution studies. Subsequently, the effect of foliar spray of ZnO and TiO2 NPs was evaluated in respect of vegetative growth, yield and quality of black carrot (Daucus carota L.) cv. Pusa Asita in presence of 50% Recommended dose of fertilizer (RDF) to assess their effect on fertilizer use efficiency also. There were 8 treatments viz. Control (no fertilizer), recommended dose of fertilizer (RDF), TiO2 (5, 10 and 15 ppm along with 50% RDF), ZnO (50, 75 and 100 ppm along with 50% RDF)] with 3 replications following Randomised Block Design having 24 plots (1 m × 1 m). The observations were taken for vegetative growth, edible root yield and root quality parameters. Although, the growth, yield and quality parameters were found superior (root yield 43.84 g/plant) under conventional system of recommended dose of fertilizers (RDF) of NPK, however, TiO2 NPs also showed very promising result close to RDF as compared to ZnO NPs. Among them, 5 ppm TiO2 foliar application along with 50% NPK was found to be the best in terms of vegetative growth, root yield (38.73 g/plant) and quality of black carrot. It was also found that higher concentration of TiO2 and ZnO NPs had adverse effect on the plant performance. Therefore, it can be concluded that 5 ppm TiO2 NPs along with 50% RDF was good for black carrot production.

Recent progress in high-performance environmental impacts of the removal of radionuclides from wastewater based on metal-organic frameworks: a review

The nuclear industry is rapidly developing and the effective management of nuclear waste and monitoring the nuclear fuel cycle are crucial. The presence of various radionuclides such as uranium (U), europium (Eu), technetium (Tc), iodine (I), thorium (Th), cesium (Cs), and strontium (Sr) in the environment is a major concern, and the development of materials with high adsorption capacity and selectivity is essential for their effective removal. Metal-organic frameworks (MOFs) have recently emerged as promising materials for removing radioactive elements from water resources due to their unique properties such as tunable pore size, high surface area, and chemical structure. This review provides an extensive analysis of the potential of MOFs as adsorbents for purifying various radionuclides rather than using different techniques such as precipitation, filtration, ion exchange, electrolysis, solvent extraction, and flotation. This review discusses various MOF fabrication methods, focusing on minimizing environmental impacts when using organic solvents and solvent-free methods, and covers the mechanism of MOF adsorption towards radionuclides, including macroscopic and microscopic views. It also examines the effectiveness of MOFs in removing radionuclides from wastewater, their behavior on exposure to high radiation, and their renewability and reusability. We conclude by emphasizing the need for further research to optimize the performance of MOFs and expand their use in real-world applications. Overall, this review provides valuable insights into the potential of MOFs as efficient and durable materials for removing radioactive elements from water resources, addressing a critical issue in the nuclear industry.

Chitosan/poly (ethylene oxide) nanofiber sponge with dual-responsive drug release and excellent antibacterial property

An ideal wound dressing can absorb wound exudate in time, and has the advantages of moisture permeability, oxygen permeability, rapid hemostatic performance, antibacterial and low-toxic, which are the key to wound healing. However, traditional wound dressings exist structural and functional defects, especially in controlling bleeding and active wound protection. Herein, a novel three-dimensional chitosan/ poly (ethylene oxide) sponge dressing (3D CS/PEO sponge-ZPC) consists of CS/PEO nanofiber sponge (carrier unit), Zn metal-organic framework grown in-situ (Zn-MOF, drug loading unit and antibacterial unit), curcumin (CUR, antibacterial unit), and poly[(N-isopropylacrylamide)-co-(methacrylic acid)] (P(NIPAM-co-MAA), 'gatekeepers' unit) to promote the wound healing by absorb exudate in time, accelerate hemostasis and inhibit bacteria growth. Due to the unique structure of the as-prepared 3D CS/PEO sponge-ZPC was endowed with smart stimuli-responsive drug release mode, rapid hemostatic performance and strong antibacterial property. The result of CUR release showed smart "ON-OFF" drug release mode. Antibacterial results verified strong antibacterial property up to 99.9 %. Hemolysis test showed that hemolysis ratio of 3D CS/PEO sponge-ZPC met the acceptable standard. The rapid hemostatic property was demonstrated by hemostatic test. High wound healing effect was confirmed in vivo. These results provide an important research basis for the design of new smart dressing.

Innovative Metal-Organic Frameworks for Targeted Oral Cancer Therapy: A Review

Metal-organic frameworks (MOFs) have proven to be very effective carriers for drug delivery in various biological applications. In recent years, the development of hybrid nanostructures has made significant progress, including developing an innovative MOF-loaded nanocomposite with a highly porous structure and low toxicity that can be used to fabricate core-shell nanocomposites by combining complementary materials. This review study discusses using MOF materials in cancer treatment, imaging, and antibacterial effects, focusing on oral cancer cells. For patients with oral cancer, we offer a regular program for accurately designing and producing various anticancer and antibacterial agents to achieve maximum effectiveness and the lowest side effects. Also, we want to ensure that the anticancer agent works optimally and has as few side effects as possible before it is tested in vitro and in vivo. It is also essential that new anticancer drugs for cancer treatment are tested for efficacy and safety before they go into further research.

Mathematical analysis and molecular descriptors of two novel metal-organic models with chemical applications

Metal-Organic Networks (MONs) are made by chemical molecules that contain metal ions and organic ligands. A crystalline porous solid called Metal-Organic Networks (MONs) is made up of a [Formula: see text] metal network of ions held in place by a multidentate ligand. (MONs) can be used for gas storage, purification drug delivery, gas separation, catalysis, and sensing applications. There is enormous potential for effective integration and research of MONs in diverse applications. Molecular descriptors are arithmetic measures that reveal a chemical substance's physical and chemical characteristics in its foundational network in a natural relationship. They demonstrate an important role in theoretical and ecological chemistry, and in the field of medicine. In this research, we calculated various recently discovered molecular descriptors viz. the modified version of second zagreb index, harmonic index, reciprocal randic index, modified version of forgotten topological index, redefined first zagreb topological index, redefined second zagreb topological index and redefined third zagreb topological index for two separate metal-organic networks. The numerical and graphical comparative analysis of these considered molecular descriptors are also performed.

Combining Copper and Zinc into a Biosensor for Anti-Chemoresistance and Achieving Osteosarcoma Therapeutic Efficacy

Due to its built-up chemoresistance after prolonged usage, the demand for replacing platinum in metal-based drugs (MBD) is rising. The first MBD approved by the FDA for cancer therapy was cisplatin in 1978. Even after nearly four and a half decades of trials, there has been no significant improvement in osteosarcoma (OS) therapy. In fact, many MBD have been developed, but the chemoresistance problem raised by platinum remains unresolved. This motivates us to elucidate the possibilities of the copper and zinc (CuZn) combination to replace platinum in MBD. Thus, the anti-chemoresistance properties of CuZn and their physiological functions for OS therapy are highlighted. Herein, we summarise their chelators, main organic solvents, and ligand functions in their structures that are involved in anti-chemoresistance properties. Through this review, it is rational to discuss their ligands' roles as biosensors in drug delivery systems. Hereafter, an in-depth understanding of their redox and photoactive function relationships is provided. The disadvantage is that the other functions of biosensors cannot be elaborated on here. As a result, this review is being developed, which is expected to intensify OS drugs with higher cure rates. Nonetheless, this advancement intends to solve the major chemoresistance obstacle towards clinical efficacy.

Comparative Analysis of Physical and Chemical Properties of Differently Obtained Zn-Methionine Chelate with Proved Antibiofilm Properties (Part II)

The previously demonstrated activity of aqueous solutions of methionine and zinc salts against biofilms of uropathogenic bacteria prompted us to investigate the structure and properties of zinc methionine complex obtained from such solutions. The paper presents the analysis results of zinc coordination complexes with methionine obtained by synthesis (0.034 mol of L-methionine, 0.034 mol of NaOH, 40 mL of H₂O, 0.017 mol ZnSO₄, 60 °C) and simple crystallization from water solution (25 mL of a solution containing 134 mmol/L L-methionine, 67 mmol/L ZnSO₄, pH = 5.74, I = 0.37 mmol/L, crystallization at room temperature during more than two weeks). IR spectral analysis and X-ray diffraction showed the structural similarity of the substances to each other, in agreement with the data described in the literature. DSC confirmed the formation of a thermally stable (in the range from -30 °C to 180 °C) chelate compound in both cases and indicated the possible retention of the polymorphic two-dimensional structure inherent in L-methionine with the temperature of phase transition 320 K. The crystallized complex had better solubility in water (100 to 1000 mL per 1.0 g) contra the synthesized analog, which was practically insoluble (more than 10 000 mL per 1.0 g). The results of the solubility assessment, supplemented by the results of the dispersion analysis of solutions by the dynamic light scattering method indicated the formation of zinc-containing nanoparticles (80 nm) in a saturated water solution of a crystallized substance, suggesting the crystallized substance may have higher bioavailability. We predicted a possibility of the equivalent existence of optically active cis and trans isomers in methionine-zinc solutions by the close values of formation enthalpy (-655 kJ/mol and -657 kJ/mol for cis and trans forms, respectively) and also illustrated by the polarimetry measurement results (∆α = 0.4°, pH = 5.74, C(Met) = 134 mmol/L; the concentration of metal ion gradually increased from 0 to 134 mmol/L). The obtained results allowed us to conclude that the compound isolated from the solution is a zinc-methionine chelate with the presence of sulfate groups and underline the role of the synthesis route for the biopharmaceutical characteristics of the resulting substance. We provided some quality indicators that it may be possible to include in the pharmacopeia monographs.

Recent Advances in Metal-Organic Framework (MOF) Asymmetric Membranes/Composites for Biomedical Applications

Metal-organic frameworks (MOFs) are a new class of porous crystalline materials composed of metal and organic material. MOFs have fascinating properties, such as fine tunability, large specific surface area, and high porosity. MOFs are widely used for environmental protection, biosensors, regenerative medicine, medical engineering, cell therapy, catalysts, and drug delivery. Recent studies have reported various significant properties of MOFs for biomedical applications, such as drug detection and delivery. In contrast, MOFs have limitations such as low stability and low specificity in binding to the target. MOF-based membranes improve the stability and specificity of conventional MOFs by increasing the surface area and developing the possibility of MOF-ligand binding, while conjugated membranes dramatically increase the area of active functional groups. This special property makes them attractive for drug and biosensor fabrication, as both the spreading and solubility components of the porosity can be changed. Asymmetric membranes are a structure with high potential in the biomedical field, due to the different characteristics on its two surfaces, the possibility of adjusting various properties such as the size of porosity, transfer rate and selectivity, and surface properties such as hydrophilicity and hydrophobicity. MOF assisted asymmetric membranes can provide a platform with different properties and characteristics in the biomedical field. The latest version of MOF materials/membranes has several potential applications, especially in medical engineering, cell therapy, drug delivery, and regenerative medicine, which will be discussed in this review, along with their advantages, disadvantages, and challenges.

Overview on recent advances of magnetic metal-organic framework (MMOF) composites in removal of heavy metals from aqueous system

Developing a novel, simple, and cost-effective analytical technique with high enrichment capacity and selectivity is crucial for environmental monitoring and remediation. Metal-organic frameworks (MOFs) are porous coordination polymers that are self-assembly synthesized from organic linkers and inorganic metal ions/metal clusters. Magnetic metal-organic framework (MMOF) composites are promising candidate among the new-generation sorbent materials available for magnetic solid-phase extraction (MSPE) of environmental contaminants due to their superparamagnetism properties, high crystallinity, permanent porosity, ultrahigh specific surface area, adaptable pore shape/sizes, tunable functionality, designable framework topology, rapid and ultrahigh adsorption capacity, and reusability. In this review, we focus on recent scientific progress in the removal of heavy metal ions present in contaminated aquatic system by using MMOF composites. Different types of MMOFs, their synthetic approaches, and various properties that are harnessed for removal of heavy metal ions from contaminated water are discussed briefly. Adsorption mechanisms involved, adsorption capacity, and regeneration of the MMOF sorbents as well as recovery of heavy metal ions adsorbed that are reported in the last ten years have been discussed in this review. Moreover, particular prospects, challenges, and opportunities in future development of MMOFs towards their greener synthetic approaches for their practical industrial applications have critically been considered in this review.

Multi-scale computational investigation of Ag-doped two-dimensional Zn-based MOFs for storage and release of small NO and CO bioactive molecules

Nitric oxide (NO) and carbon monoxide (CO) are two important gasotransmitters with critical biological roles in the human body. Due to their short lifetime and dangerous side effects at high concentrations, it is essential to find safe storage and slow release methods of these two gases. Herein, we report the multi-scale simulations of two-dimensional (Zn)MOF-470 doped with antimicrobial Ag atoms to evaluate the degree of enhancement of adsorption and dynamics of NO and CO. The results show that NO binds to Ag stronger than CO. In addition, the decoration of the benzene ring with Ag atoms on both sides has led to the effective adsorption of NO and CO with binding energies of -26.34 and -21.71 kcal mol^-1, respectively. The GCMC results show that Ag can significantly improve NO and CO storage capacity, especially in low-pressure ranges. The storage capacity of NO in (Zn)MOF-470 and Ag-doped MOFs is 6.12 and 7.21 mol kg^-1, respectively. This storage capacity for CO is 4.09 and 5.48 mol kg^-1, respectively. The heat of adsorption for NO and CO was obtained to be 31.72 and 25.64 kJ mol^-1 for (Zn)MOF-470, and 36.5 and 31.12 kJ mol^-1 for Ag-(Zn)MOF-470 at 298 K and 1 bar. Besides, the MD results indicate that when Ag is doped into the structure of MOFs, the dynamics of gases within the pores of MOFs significantly decrease. When Ag atoms are considered mobile, the dynamics of guest molecules increase and it shows that the structural and dynamical behavior of NO and CO strongly depends on the mobility or immobility of doped Ag atoms. The result from the MSD directions (x, y, and z components) indicates that the diffusion of NO and CO within the pores of (Zn)MOF-470 is anisotropic and this may be due to the 2D structural characteristics of the MOF, the dipolar nature of NO and CO molecules, and the very narrow and layered pores of (Zn)MOF-470. These promising results from the simulations suggest that (Zn)MOF-470 and doping Ag atoms into this MOF can improve the storage capacity and slow release of bioactive NO and CO along with utilization of the antimicrobial nature of Ag atoms in medical applications.

Metal-organic frameworks for food contaminant adsorption and detection

Metal-organic framework materials (MOFs) have been widely used in food contamination adsorption and detection due to their large specific surface area, specific pore structure and flexible post-modification. MOFs with specific pore size can be targeted for selective adsorption of some contaminants and can be used as pretreatment and pre-concentration steps to purify samples and enrich target analytes for food contamination detection to improve the detection efficiency. In addition, MOFs, as a new functional material, play an important role in developing new rapid detection methods that are simple, portable, inexpensive and with high sensitivity and accuracy. The aim of this paper is to summarize the latest and insightful research results on MOFs for the adsorption and detection of food contaminants. By summarizing Zn-based, Cu-based and Zr-based MOFs with low cost, easily available raw materials and convenient synthesis conditions, we describe their principles and discuss their applications in chemical and biological contaminant adsorption and sensing detection in terms of stability, adsorption capacity and sensitivity. Finally, we present the limitations and challenges of MOFs in food detection, hoping to provide some ideas for future development.

Synergistically Enhancing the Therapeutic Effect on Cancer, via Asymmetric Bioinspired Materials

The undesirable side effects of conventional chemotherapy are one of the major problems associated with cancer treatment. Recently, with the development of novel nanomaterials, tumor-targeted therapies have been invented in order to achieve more specific cancer treatment with reduced unfavorable side effects of chemotherapic agents on human cells. However, the clinical application of nanomedicines has some shortages, such as the reduced ability to cross biological barriers and undesirable side effects in normal cells. In this order, bioinspired materials are developed to minimize the related side effects due to their excellent biocompatibility and higher accumulation therapies. As bioinspired and biomimetic materials are mainly composed of a nanometric functional agent and a biologic component, they can possess both the physicochemical properties of nanomaterials and the advantages of biologic agents, such as prolonged circulation time, enhanced biocompatibility, immune modulation, and specific targeting for cancerous cells. Among the nanomaterials, asymmetric nanomaterials have gained attention as they provide a larger surface area with more active functional sites compared to symmetric nanomaterials. Additionally, the asymmetric nanomaterials are able to function as two or more distinct components due to their asymmetric structure. The mentioned properties result in unique physiochemical properties of asymmetric nanomaterials, which makes them desirable materials for anti-cancer drug delivery systems or cancer bio-imaging systems. In this review, we discuss the use of bioinspired and biomimetic materials in the treatment of cancer, with a special focus on asymmetric nanoparticle anti-cancer agents.

Plasma-Enabled Smart Nanoexosome Platform as Emerging Immunopathogenesis for Clinical Viral Infection

Smart nanoexosomes are nanosized structures enclosed in lipid bilayers that are structurally similar to the viruses released by a variety of cells, including the cells lining the respiratory system. Of particular importance, the interaction between smart nanoexosomes and viruses can be used to develop antiviral drugs and vaccines. It is possible that nanoexosomes will be utilized and antibodies will be acquired more successfully for the transmission of an immune response if reconvalescent plasma (CP) is used instead of reconvalescent plasma exosomes (CPExo) in this concept. Convalescent plasma contains billions of smart nanoexosomes capable of transporting a variety of molecules, including proteins, lipids, RNA and DNA among other viral infections. Smart nanoexosomes are released from virus-infected cells and play an important role in mediating communication between infected and uninfected cells. Infections use the formation, production and release of smart nanoexosomes to enhance the infection, transmission and intercellular diffusion of viruses. Cell-free smart nanoexosomes produced by mesenchymal stem cells (MSCs) could also be used as cell-free therapies in certain cases. Smart nanoexosomes produced by mesenchymal stem cells can also promote mitochondrial function and heal lung injury. They can reduce cytokine storms and restore the suppression of host antiviral defenses weakened by viral infections. This study examines the benefits of smart nanoexosomes and their roles in viral transmission, infection, treatment, drug delivery and clinical applications. We also explore some potential future applications for smart nanoexosomes in the treatment of viral infections.

Recent Advances in Plasma-Engineered Polymers for Biomarker-Based Viral Detection and Highly Multiplexed Analysis

Infectious diseases remain a pervasive threat to global and public health, especially in many countries and rural urban areas. The main causes of such severe diseases are the lack of appropriate analytical methods and subsequent treatment strategies due to limited access to centralized and equipped medical centers for detection. Rapid and accurate diagnosis in biomedicine and healthcare is essential for the effective treatment of pathogenic viruses as well as early detection. Plasma-engineered polymers are used worldwide for viral infections in conjunction with molecular detection of biomarkers. Plasma-engineered polymers for biomarker-based viral detection are generally inexpensive and offer great potential. For biomarker-based virus detection, plasma-based polymers appear to be potential biological probes and have been used directly with physiological components to perform highly multiplexed analyses simultaneously. The simultaneous measurement of multiple clinical parameters from the same sample volume is possible using highly multiplexed analysis to detect human viral infections, thereby reducing the time and cost required to collect each data point. This article reviews recent studies on the efficacy of plasma-engineered polymers as a detection method against human pandemic viruses. In this review study, we examine polymer biomarkers, plasma-engineered polymers, highly multiplexed analyses for viral infections, and recent applications of polymer-based biomarkers for virus detection. Finally, we provide an outlook on recent advances in the field of plasma-engineered polymers for biomarker-based virus detection and highly multiplexed analysis.

Tailoring biocompatibility of composite scaffolds of collagen/guar gum with metal-organic frameworks

Metal-organic frameworks (MOFs) are microporous materials with high potential for biomedical applications. They are useful as drug delivery systems, antibacterials, and biosensors. Recently, composite materials comprised of polymer matrixes and MOFs have gained relevance in the biomedical field due to their high potential as materials to accelerate wound healing. In this work, we studied the potential applications of composite hydrogels containing MgMOF74, CaMOF74, and Zn(Atz)(Py). The composite hydrogels are biodegradable, being completely degraded after 15 days by the action of collagenase and papain. The composites showed high biocompatibility reaching cell viabilities up to 165.3 ± 8.6% and 112.3 ± 12.8% for porcine fibroblasts and human monocytes, respectively. The composites did not show hemolytic character and they showed antibacterial activity against Escherichia coli reaching up to 84 ± 5% of inhibition compared with amoxicillin (20 ppm). Further, the immunological assays revealed that the composites produce a favorable cell signaling stimulating the secretion of the TGF-β and MCP-1 cytokines and maintaining the secretion of TNF-α in normal levels. Finally, the composites showed potential to be used as controlled drug delivery systems reaching a release efficiency of 30.5 ± 2.5% for ketorolac. Finally, results revealed that ColGG-Zn(Atz)(Py) was the best formulation evaluated.

Pore engineering of biomolecule-based metal–organic framework nanocarriers for improving loading and release of paclitaxel

There has been growing interest in employing metal–organic frameworks (MOFs) incorporated with biomolecules, known as b-MOFs, in biomedical applications.

Zinc-Based Metal-Organic Frameworks in Drug Delivery, Cell Imaging, and Sensing

The design and structural frameworks for targeted drug delivery of medicinal compounds and improved cell imaging have been developed with several advantages. However, metal-organic frameworks (MOFs) are supplemented tremendously for medical uses with efficient efficacy. These MOFs are considered as an absolutely new class of porous materials, extensively used in drug delivery systems, cell imaging, and detecting the analytes, especially for cancer biomarkers, due to their excellent biocompatibility, easy functionalization, high storage capacity, and excellent biodegradability. While Zn-metal centers in MOFs have been found by enhanced efficient detection and improved drug delivery, these Zn-based MOFs have appeared to be safe as elucidated by different cytotoxicity assays for targeted drug delivery. On the other hand, the MOF-based heterogeneous catalyst is durable and can regenerate multiple times without losing activity. Therefore, as functional carriers for drug delivery, cell imaging, and chemosensory, MOFs' chemical composition and flexible porous structure allowed engineering to improve their medical formulation and functionality. This review summarizes the methodology for fabricating ultrasensitive and selective Zn-MOF-based sensors, as well as their application in early cancer diagnosis and therapy. This review also offers a systematic approach to understanding the development of MOFs as efficient drug carriers and provides new insights on their applications and limitations in utility with possible solutions.

Facile synthesis of Zn-based metal-organic framework in the presence of carboxymethyl cellulose: A safe carrier for ibuprofen

Fabrication of porous materials with a high surface area affords a great interest to achieve a system with a prolonged drug release manner. In this context, the subject of this work is to describe a novel green one-pot synthesis route for the growth of metal-organic framework (MOF) from zinc metal (Zn) and 1, 4-benzene dicarboxylic acid (BDC) in the vicinity of the carboxymethyl cellulose (CMC), which homogeneously confined in the biopolymeric chains. The synthesized Zn (BDC)@CMC was characterized and confirmed using different analyses. N₂ adsorption/desorption isotherms determined the mean diameter of pore size of about 2.3993 nm. Ibuprofen (IBU) as a model drug was highly loaded to the Zn(BDC)@CMC by immersing in the drug solution; 50.95%. The in vitro IBU release study indicated that the Zn(BDC)@CMC has more attractive performances than pristine Zn(BDC). The IBU release occurred via the Fickian mechanism. Isotherm studies showed that the IBU adsorption on obeys from Langmuir isotherm; R² 0.9623. The MTT results revealed the HEK 293A cell viability of higher than 90% for Zn(BDC)@CMC that confirms its cytocompatibility. Overall, obtained results confirm the functionality of CMC biopolymer for in situ growth of MOF in the presence of it due to having the reactive nature.

Comparing Zinc Oxide- and Zinc Silicate-Related Metal-Organic Networks via Connection-Based Zagreb Indices

Metal-organic networks (MONs) are among the unique complex and porous chemical compounds. So, these chemical compounds consist of metal ions (vertices) and organic ligands (edges between vertices). These networks represent large pore volume, extreme surface area, morphology, excellent chemical stability, highly porous and crystalline materials, and octahedral clusters. MONs are mostly used in assessment of chemicals, gas and energy storage devices, sensing, separation and purification of different gases, heterogeneous catalysis, environmental hazard, toxicology, adsorption analysis, biomedical applications, and biocompatibility. Recently, drug delivery, cancer imaging, and biosensing have been investigated by biomedical applications of zinc-related MONs. The versatile applications of these MONs make them helpful tools in many fields of science in recent decade. In this paper, we discuss the two different zinc oxide and zinc silicate related MONs according to the number of increasing layers of metal and organic ligands together. We also compute the connection-based Zagreb indices such as first Zagreb connection index (ZCI), second ZCI, modified first ZCI, modified second ZCI, modified third ZCI, and modified fourth ZCI. Moreover, a comparison is also included between the zinc-related MONs by using numerical values of connection-based Zagreb indices. Finally, we conclude that zinc silicate-related MON is better than zinc oxide-related MON for all values of n.

Multifunctional Gold Nanorod for Therapeutic Applications and Pharmaceutical Delivery Considering Cellular Metabolic Responses, Oxidative Stress and Cellular Longevity

Multifunctional gold nanorods (GNR) have drawn growing interest in biomedical fields because of their excellent biocompatibility, ease of alteration, and special optical properties. The great advantage of using GNR in medicine is their application to Photothermal therapy (PPTT), which is possible thanks to their ability to turn luminous energy into heat to cause cellular hyperthermia. For this purpose, the relevant articles between 1988 and 2020 were searched in databases such as John Wiley, Free paper, Scopus, Science Direct, and Springer to obtain the latest findings on multifunctional gold nanorods for therapeutic applications and pharmaceutical delivery. In this article, we review recent progress in diagnostic and therapeutic applications of multifunctional GNR, highlighting new information about their toxicity to various cellular categories, oxidative stress, cellular longevity, and their metabolic effects, such as the effect on the energy cycles and genetic structures. The methods for the synthesis and functionalization of GNR were surveyed. This review includes new information about GNR toxicity to various cellular categories and their metabolic effects.

Glutathionylation-dependent proteasomal degradation of wide-spectrum mutant p53 proteins by engineered zeolitic imidazolate framework-8

Point mutations within the DNA-binding domain of the TP53 gene occur in a significant percentage of human cancer, leading to cellular accumulation of highly stabilized mutant p53 proteins (mutp53) with tumor-promoting properties. Depletion of mutp53, through inducing either autophagic or proteasomal degradation, is an attractive strategy for the therapy of p53-mutated cancer, but the currently-known degradation inducers, almost exclusively small molecules, are inadequate. Here we show that pH-responsive zeolitic imidazolate framework-8 (ZIF-8) offers a novel solution to mutp53 degradation. ZIF-8 facilitated ubiquitination-mediated and glutathionylation-dependent proteasomal degradation of all of the nine mutp53 we tested, including six hot-spot mutp53, but not the wild-type p53 protein. Sustained elevation of intracellular Zn⁺⁺ level, resulted from decomposition of the internalized ZIF-8 in the acidic endosomes, decreased the intracellular reduced glutathione (GSH): oxidized glutathione (GSSG) ratio and was essential for mutp53 glutathionylation and degradation. ZIF-8 modified with an Z1-RGD peptide, exhibiting enhanced cellular internalization and improved decomposition behavior, preferentially killed mutp53-expressing cancer cells and demonstrated remarkable therapeutic efficacy in a p53 S241F ES-2 ovarian cancer model as well as in a p53 Y220C patient-derived xenograft (PDX) breast cancer model. The ability to induce wide-spectrum mutp53 degradation gives ZIF-8 a clear advantage over other degradation-inducers, and engineered nanomaterials may be promising alternatives to small molecules for the development of mutp53-targeting drugs.

A methylation-inspired mesoporous coordination polymer for identification and removal of organic pollutants in aqueous solutions

Tuning the interfacial chemistry of a metal–biomolecule coordination hybrid via bio-inspired methylation for structure enhancement and selective hazard adsorption/identification.

Metal-Organic Framework Nanoparticles Induce Pyroptosis in Cells Controlled by the Extracellular pH

Ion homeostasis is essential for cellular survival, and elevated concentrations of specific ions are used to start distinct forms of programmed cell death. However, investigating the influence of certain ions on cells in a controlled way has been hampered due to the tight regulation of ion import by cells. Here, it is shown that lipid-coated iron-based metal-organic framework nanoparticles are able to deliver and release high amounts of iron ions into cells. While high concentrations of iron often trigger ferroptosis, here, the released iron induces pyroptosis, a form of cell death involving the immune system. The iron release occurs only in slightly acidic extracellular environments restricting cell death to cells in acidic microenvironments and allowing for external control. The release mechanism is based on endocytosis facilitated by the lipid-coating followed by degradation of the nanoparticle in the lysosome via cysteine-mediated reduction, which is enhanced in slightly acidic extracellular environment. Thus, a new functionality of hybrid nanoparticles is demonstrated, which uses their nanoarchitecture to facilitate controlled ion delivery into cells. Based on the selectivity for acidic microenvironments, the described nanoparticles may also be used for immunotherapy: the nanoparticles may directly affect the primary tumor and the induced pyroptosis activates the immune system.

Synthesis and catalytic activities of a Zn(ii) based metallomacrocycle and a metal-organic framework towards one-pot deacetalization-Knoevenagel tandem reactions under different strategies: a comparative study

Solvothermal reactions between a pyridine based amide functionalized dicarboxylic acid, 4,4'-{(pyridine-2,6-dicarbonyl)bis(azanediyl)}dibenzoic acid (H2L), and zinc(ii) nitrate in the absence and presence of a base produced the binuclear metallomacrocyclic compound [Zn2(L)2(H2O)4]·2(H2O)·6(DMF) (1) and the metallomacrocyclic based two dimensional MOF [Zn5(L)4(OH)2(H2O)4]n·8n(DMF)·4n(H2O) (2), respectively. Compound 1 bears two tetrahedral Zn(ii) centres, whereas the 2D framework 2 includes a penta-nuclear Zn(ii) cluster as a secondary building block unit, with two of the metal cations assuming a tetrahedral type geometry and the remaining three an octahedral type geometry. The topological analyses reveal that compound 1 has a 2-connected uninodal net and framework 2 has a 2, 8-connected binodal net. These compounds heterogeneously catalyse the tandem deacetalization-Knoevenagel condensation reactions carried out under conventional heating, microwave irradiation or ultrasonic irradiation. Comparative studies show that ultrasonic irradiation (final product yield of 99% after 2 h of reaction time) provides the most favourable method (e.g., microwave irradiation leads to a final product yield of 91% after 3 h of reaction time). Moreover, the catalysts can be reused at least for five consecutive cycles without losing activity significantly.

Recent developments on zinc(ii) metal-organic framework nanocarriers for physiological pH-responsive drug delivery

The high storage capacities and excellent biocompatibilities of zinc(ii) metal-organic frameworks (Zn-MOFs) have made them outstanding candidates as drug delivery carriers. Recent studies on the pH-responsive processes based on carrier-drug interactions have proven them to be the most efficient and effective way to control the release profiles of drugs. To satisfy the ever-growing demand in cancer therapy, great efforts are being devoted to the development of methods to precisely control drug release and achieve targeted use of an active substance at the right time and place. In this review article, we discuss the diverse stimuli based on Zn-MOFs carriers that have been achieved upon external activation from single pH-stimulus-responsive or/and multiple pH-stimuli-responsive viewpoints. Also, the perspectives and future challenges in this type of carrier system are discussed.

Optimization of ZnAl/Chitosan Supra-Nano Hybrid Preparation as Efficient Antibacterial Material

The menace of antimicrobial resistance continues to increase and hence the need to discover new antibiotics, especially alternative and effective sources such as hybrid organic-inorganic, organic-organic materials, and other combinations. In this study, an antimicrobial hybrid supra-nano material was prepared by the bi-titration synthesis method of chitosan (CS) and ZnAl layered double hydroxide. Fourier-transform infrared spectrometer (FTIR), thermogravimetric and differential thermal gravimetric (TGA/DTG), ultraviolet-visible (UV-Vis), X-ray diffraction (XRD), and scanning electron microscopy (SEM) analyses indicated that the ZnAl/CS hybrid exhibited low crystallinity with high thermal stability. The results of ZnAl/CS characterization showed the characteristic properties of the individual components ZnAl and CS, indicating a successful preparation of the ZnAl/CS hybrid. The antibacterial tests revealed that the ZnAl/CS hybrid possessed an enhanced antimicrobial effect against both Escherichia coli (E. coli, MTCC 739) and Penicilliumcyclopium (P. cyclopium, AS 3.4513). Under the central composite design (CCD) of the response surface methodology (RSM) tool, the parameters of the hybrid synthesis reaction were optimized and the result obtained was as follows: reaction pH was 11.3, reagent Zn/Al ratio was 3.27, and chitosan concentration was 1.07 g/L. After optimization, it was found that the antibacterial activity of ZnAl/CS was strengthened against E. coli as evidenced by a widening of the inhibition zone of about 41.6%. The antibacterial activity of ZnAl/CS was mainly due to the reactivation of the antibacterial activity of CS associated with the release of Zn²⁺ and Al³⁺ metal ions in addition to ZnO, Al₂O₃, and ZnAl₂O₄ compounds resulting from the method of preparation.