Chemical Enhancers for the Absorption of Substances Through the Skin: Laurocapram and Its Derivatives

Enhancing topical delivery of ISRIB: Optimizing cream formulations with chemical enhancers and pH adjustment

Chemical warfare agents, particularly vesicants like lewisite, pose a threat due to their ability to cause skin damage through accidental exposure or deliberate attacks. Lewisite rapidly penetrates the skin, causing inflammation and blistering. This study focuses on developing a cream formulation of a therapeutic agent, called integrated stress response inhibitor (ISRIB), to treat lewisite-induced injuries. Moreover, animal studies demonstrate a molecular target engagement (ISR) and significant efficacy of ISRIB against lewisite-induced cutaneous injury. The goal of this formulation is to enhance the delivery of ISRIB directly to affected skin areas using an oil-in-water cream emulsion system. We investigated various excipients, including oils, surfactants, emollients, and permeation enhancers, to optimize ISRIB's solubility and penetration through the skin. The result of this study indicated that the optimal formulation includes 30 % w/w of N-Methyl-2-pyrrolidone, dimethyl sulfoxide and Azone® at a pH of 5. 5. It delivered the highest amount of ISRIB into the skin, demonstrating highest skin absorption with no detectable systemic exposure. Additionally, characterization of the cream, including texture analysis, emulsion type, and content uniformity, confirmed its' suitability for topical application. These findings suggest that ISRIB cream formulation is a promising approach for the localized treatment of skin injuries caused by lewisite.

Application of biomacromolecule-based passive penetration enhancement technique in superficial tumor therapy: A review

Transdermal drug delivery (TDD) has shown great promise in superficial tumor therapy due to its noninvasive and avoidance of the first-pass effect. Especially, passive penetration enhancement technique (PPET) provides the technical basis for TDD by temporarily altering the skin surface structure without requiring external energy. Biomacromolecules and their derived nanocarriers offer a wide range of options for PPET development, with outstanding biocompatibility and biodegradability. Furthermore, the abundant functional groups on biomacromolecule surfaces can be modified to yield functional materials capable of targeting specific sites and responding to stimuli. This enables precise drug delivery to the tumor site and controlled drug release, with the potential to replace traditional drug delivery methods and make PPET-related personalized medicine a reality. This review focuses on the mechanism of biomacromolecules and nanocarriers with skin, and the impact of nanocarriers' surface properties of nanocarriers on PPET efficiency. The applications of biomacromolecule-based PPET in superficial tumor therapy are also summarized. In addition, the advantages and limitations are discussed, and their future trends are projected based on the existing work of biomacromolecule-based PPET.

Design of Ionic Liquid Formulations with Azone-Mimic Structures for Enhanced Drug Skin Permeation

Although laurocapram (Azone) significantly enhances the skin permeation of drugs, its development was hindered by its skin irritation. We then developed an Azone-mimic ionic liquid (IL-Azone), composed of less irritating cationic ε-caprolactam and anionic myristic acid. IL-Azone dissociates to the original cation and anion in the presence of water in the formulation. We tried to select a formulation suitable for IL-Azone in the present study. Each formulation contained 5 % of either Azone or IL-Azone along with the model drug antipyrine, and skin permeation experiments of the drug were conducted. The results revealed that IL-Azone did not enhance skin permeation when combined with most formulations tested. However, a notable and rapid enhancement in skin permeation was observed when combined with white petrolatum. This effect could be attributed to the minimal water content in white petrolatum, which prevented IL-Azone degradation. Furthermore, its permeation-enhancing effects from IL-Azone in white petrolatum were more pronounced and rapid than Azone. The rapid onset observed with IL-Azone can be attributed to its degradation into its original components at the interface between the stratum corneum and the living epidermis, which results in a shorter lag time before achieving a steady-state concentration in the SC compared to Azone.

Design of an Ante-enhancer with an Azone-Mimic Structure using Ionic Liquid

PURPOSE

Laurocapram (Azone) was broadly examined as a representative enhancer of skin penetration in the 1980s. However, it was not approved for treatment because it caused skin irritation following its penetration into the epidermis through the stratum corneum. In the present study, a so-called ante-enhancer with an Azone-mimic structure was designed based on an ante-drug with negligible systemic toxic effects following its permeation through the skin.

METHODS

The ante-enhancer was designed using ionic liquid technology: an ionic liquid-type ante-enhancer (IL-Azone) with an Azone-mimic structure was prepared from ε-caprolactam and myristic acid as cationic and anionic substances, respectively. The enhancing effects of IL-Azone on the permeation by the following model drugs through pig skin were examined: isosorbide 5-mononitrate (ISMN), antipyrine (ANP), and fluorescein isothiocyanate dextran (FD-4). Skin irritation by IL-Azone was assessed using the Draize method.

RESULTS

The primary irritation index (P.I.I.) of IL-Azone by the Draize method was markedly lower than that of Azone (6.9). Although the ability of IL-Azone to enhance skin penetration was not as high as Azone, IL-Azone moderately increased skin permeation by the model compounds tested (ISMN: 4.7 fold, ANP: 4.5 fold, FD-4: 4.0 fold).

CONCLUSIONS

These results suggest the usefulness of designing a skin penetration enhancer using ionic liquid technology. Further trials on the ionic liquid design with an Azone-mimic structure using other cations and anions may lead to the development of better ante-enhancers.

Formulation Development and Ex-Vivo Permeability of Curcumin Hydrogels under the Influence of Natural Chemical Enhancers

Background: The aim of the present research was to formulate and evaluate curcumin hydrogel and to investigate the potential of natural essential oils as permeation enhancers. Methods: Curcumin 2% w/w hydrogel containing various concentrations of eucalyptus oil, aloe vera oil and clove oil was developed using carboxy methyl cellulose (CMC) as a gelling agent. Differential scanning calorimetry and Fourier Transform infrared spectroscopy were used to evaluate the compatibility between the drug and the excipients. In order to assess the efficacy of the formulation; rheological properties, skin irritation studies, in vitro release, ex vivo permeation and retention studies were conducted. Results: DSC and FTIR suggest no in-compatibility between curcumin and excipients. Studies proved that addition of suitable natural permeation enhancers to the hydrogels improved the in vitro release and ex vivo permeation and retention of curcumin. From the various natural essential oils, the aloe vera oil at a concentration of 3% w/w had the greatest effect on the permeability rate and skin retention of the Curcumin and produces the highest enhancement ratio amongst all the concentrations of essential oils examined. Conclusion: Aloe vera oil enhances the permeation of curcumin across the skin by altering the complex structure of the stratum corneum without itself undergoing any change. The developed curcumin hydrogels along with natural essential oils may present an effective choice regarding skin infection/wound healing.

Simplified stratum corneum model membranes for studying the effects of permeation enhancers

The activity of transdermal permeation enhancers is usually evaluated in vitro on human or animal skin, but skin samples can be hard to source and highly variable. To provide a more consistent basis for evaluating the activity of permeation enhancers, we prepared relatively simple and inexpensive artificial membranes that imitate the stratum corneum (SC) lipid matrix. Our membranes were composed of stearic acid, cholesterol, cholesterol sulfate and a ceramide (CER) component consisting of N-2-hydroxystearoyl phytosphingosine (CER[AP]) and/or N-stearoyl phytosphingosine (CER[NP]). First, the permeation of theophylline (TH) and indomethacin (IND) through these membranes was compared with their permeation through porcine skin. Because the mixed CER[AP]/[NP] membrane gave the closest results to skin, this membrane was then used to test the effects of two permeation enhancers: N-dodecyl azepan-2-one (Azone) and (S)-N-acetylproline dodecyl ester (L-Pro2). Both enhancers significantly increased the flux of TH and IND through the skin and, even more markedly, through the lipid membrane, L-Pro2 having a stronger effect than Azone. Thus, our simplified model of the SC lipid membrane based on phytosphingosine CERs appears to be suitable for mimicking skin permeation.

Overview and appraisal of the current concept and technologies for improvement of sublingual drug delivery

Sublingual drug delivery is capable of achieving high bioavailability by avoiding first-pass liver extraction and enzymatic degradation in the gastrointestinal tract, as well as achieving rapid onset of effect. Thus, this route of administration can offer attractive therapeutic advantages for certain drugs as a convenient substitute for parenteral administration and has been applied successfully to a number of therapeutic conditions, especially urgent cardiovascular conditions and acute severe pain control. However, due to inherent limitations such as small sublingual mucosa area for absorption, primarily passive mechanism of transport, short residence time, and potential local irritation, a relatively small number of sublingual products have been successfully developed to date. In this Review, key concepts and technologies for potential improvement of sublingual drug delivery are reviewed. The optimal application of these concepts and technologies, together with clinical need for non-parenteral delivery, will hopefully broaden the development of sublingual drug delivery in the future.

Topical delivery of anti-TNFα siRNA and capsaicin via novel lipid-polymer hybrid nanoparticles efficiently inhibits skin inflammation in vivo

The barrier properties of the skin pose a significant but not insurmountable obstacle for development of new effective anti-inflammatory therapies. The objective of this study was to design and evaluate therapeutic efficacy of anti-nociception agent Capsaicin (Cap) and anti-TNFα siRNA (siTNFα) encapsulated cyclic cationic head lipid-polymer hybrid nanocarriers (CyLiPns) against chronic skin inflammatory diseases. Physico-chemical characterizations including hydrodynamic size, surface potential and entrapment efficacies of CyLiPns were found to be 163±9nm, 35.14±8.23mV and 92% for Cap, respectively. In vitro skin distribution studies revealed that CyLiPns could effectively deliver FITC-siRNA up to 360μm skin depth. Further, enhanced (p<0.001) Cap permeation from CyLiPns was observed compared to Capsaicin-Solution and Capzasin-HP. Therapeutic efficacies of CyLiPns were assessed using imiquamod-induced psoriatic plaque like model. CyLiPns carrying both Cap and siTNFα showed significant reduced expression of TNFα, NF-κB, IL-17, IL-23 and Ki-67 genes compared to either drugs alone (p<0.05) and were in close comparison with Topgraf®. Collectively these findings support our notion that novel cationic lipid-polymer hybrid nanoparticles can efficiently carry siTNFα and Cap into deeper dermal milieu and Cap with a combination of siTNFα shows synergism in treating skin inflammation.

In vitro characterization of chitosan gels for buccal delivery of celecoxib: influence of a penetration enhancer

Celecoxib (Cx) shows high efficacy in the treatment of osteoarthritis and rheumatoid arthritis as a result of its high specificity for COX-2, without gastrolesivity or interference with platelet function at therapeutic concentrations. Besides of anti-inflammatory effects, Cx also has a potential role for oral cancer chemoprevention. For these conditions, oral administration in long-term treatment is a concern due to its systemic side effects. However, local application at the site of injury (e.g., buccal inflammation conditions or chemoprevention of oral cancer) is a promising way to reduce its toxicity. In this study, the in vitro characterization of mucoadhesive chitosan (CHT) gels associated to Azone® was assessed to explore the potential buccal mucosal administration of Cx in this tissue. Rheological properties of gels were analyzed by a rheometer with cone-plate geometry. In vitro Cx release and permeability studies used artificial membranes and pig cheek mucosa, respectively. Mucoadhesion were measured with a universal test machine. CHT gels (3.0%) containing 2.0% or 3.0% Az showed more appropriate characteristics compared to the others: pH values, rheology, higher amount of Cx retained in the mucosa, and minimal permeation through mucosa, besides the highest mucoadhesion values, ideal for buccal application. Moreover, the flux (J) and amounts of drug released decreased with increased CHT and Az concentrations. CHT gels (3.0%) associated with 2.0% or 3.0% Az may be considered potential delivery systems for buccal administration of Cx.

Investigation of substituted 6-aminohexanoates as skin penetration enhancers

Skin penetration enhancers are compounds used to facilitate the transdermal delivery of drugs that are otherwise not sufficiently permeable. Through a synthetic route implementing two series of esters, we generated transdermal penetration enhancers by a multi-step reaction with substituted 6-aminohexanoic acid. We present the synthesis of all newly prepared compounds here with structural confirmation accomplished by (1)H NMR, (13)C NMR, IR and mass spectroscopy (MS). The lipophilicity (logk) of all compounds was determined via RP-HPLC and their hydrophobicity (logP/ClogP) was also calculated using two commercially available programs. Ab initio calculations of geometry and molecular dynamic simulations were employed to investigate the 3-dimensional structures of selected compounds. The transdermal penetration-enhancing activity of all the synthesized esters were examined in vitro and demonstrated higher enhancement ratios than oleic acid. Compounds 2e (C(10) ester chain) and 2f (C(11) ester chain) exhibited the highest enhancement ratios. It can be concluded that the series non-substituted at the C((2)) position by a ω-lactam ring showed significantly higher activity than those with azepan-2-one. None of the prepared compounds penetrated through the skin. All of the investigated agents demonstrated minimal anti-proliferative activity using the SK-N-MC neuroepithelioma cell line (IC(50)>6.25μM), suggesting these analogs would have a low cytotoxic profile when administered in vivo as chemical penetration enhancers. The correlation between the chemical structure of the studied compounds and their lipophilicity is discussed in regards to transdermal penetration-enhancing activity.

Topical drug delivery by a polymeric nanosphere gel: Formulation optimization and in vitro and in vivo skin distribution studies

Tyrosine-derived nanospheres have demonstrated potential as effective carriers for the topical delivery of lipophilic molecules. In this investigation, a gel formulation containing nanospheres was developed for effective skin application and enhanced permeation. Carbopol and HPMC hydrophilic gels were evaluated for dispersion of these nanospheres. Sparingly water soluble diclofenac sodium (DS) and lipophilic Nile Red were used as model compounds. DS was used to determine the optimum polymer type, viscosity and release properties of the gel while fluorescent Nile Red was used in in vitro and in vivo skin distribution studies. In addition, the effect of a penetration enhancer, Azone, on the skin delivery was investigated. Dispersion of Nile Red-loaded nanospheres in 1% w/v HPMC gel produced a uniform and stable dispersion with suitable rheological properties for topical application, without any short-term cellular toxicity or tissue irritation. In vitro permeation studies using human cadaver skin revealed that the deposition of Nile Red via the nanosphere gel in the upper and lower dermis was 1.4 and 1.8 fold higher, respectively, than the amount of Nile Red deposited via an aqueous nanosphere formulation. In vivo, the HPMC gel containing Nile Red-loaded nanospheres significantly enhanced (1.4 fold) the permeation of Nile Red to the porcine stratum corneum/epidermis compared to the aqueous Nile Red-loaded nanospheres. An additional increase (1.4 fold) of Nile Red deposition in porcine stratum corneum/epidermis was achieved by incorporation of Azone (0.2M) into the nanosphere gel formulation. Therefore, tyrosine-derived nanospheres dispersed in gels offer promise for the topical delivery of lipophilic drugs and personal care agents to skin for treatment of cancers, psoriasis, eczema, and microbial infections.

Chitosan-tripolyphosphate nanoparticles as a possible skin drug delivery system for aciclovir with enhanced stability

Objectives

The aim of the present study was to create a skin delivery system based on chitosan-tripolyphosphate nanoparticles for aciclovir with enhanced chemical stability.

Methods

Nanoparticles were formed spontaneously using ionotropic gelation with tripolyphosphate. Two different sizes of aciclovir-loaded nanoparticles were characterised in terms of zeta potential, particle size and polydispersity index.

Key findings

Standard diffusion experiments using Franz-type diffusion cells showed reasonable skin permeability that depended on particle size and chitosan content. The larger the nanoparticle, having a higher chitosan content, the better the aciclovir permeation through porcine skin. Differential scanning calorimetry studies showed a remarkable decrease in the typical transition temperature, indicating an interaction between skin lipid bilayer and the nanoparticles. Moreover, the chemical stability of aciclovir was significantly increased by the nanoparticle system. After the observation period of 5 weeks, aciclovir incorporated into nanoparticles had undergone photo-oxidation to a significantly lower extent than pure aqueous solution. This degradation product of aciclovir was analysed using LC/MS, and its identity established.

Conclusions

These studies demonstrate that incorporation of aciclovir into chitosan-tripolyphosphate nanoparticles significantly improves its chemical stability. Moreover, skin diffusion studies in vitro showed improved permeation of aciclovir from the nanoparticle system, especially from nanoparticles with higher chitosan content.