Screening of ionically crosslinked chitosan-tripolyphosphate microspheres using Plackett–Burman factorial design for the treatment of intrapocket infections

Myricetin encapsulated chitosan nanoformulation for management of type 2 diabetes: Preparation, optimization, characterization and in vivo activity

Type 2 diabetes mellitus (T2DM) is a serious and alarming disease attracting widespread attention. It is not a single metabolic disease; over time, it leads to serious disorders, namely, diabetic nephropathy, neuropathy, retinopathy and several cardiovascular, hepatocellular complications. The increase in T2DM cases in recent times has attracted significant attention. Currently, the medications available have side effects, and injectables are painful, causing trauma to the patients. Therefore, it is imperative to come up with oral delivery. In this background we report here a nanoformulation carrying natural small molecule Myricetin (MYR) encapsulated within Chitosan nanoparticles (CHT-NPs). MYR-CHT-NPs were prepared by ionic gelation method and evaluated using different characterization techniques. The in vitro release of MYR from CHT NPs in different physiological media showed pH dependence. in vivo pharmacodynamic study followed by oral administration in Albino Wistar rats showed better glycaemic control than existing drug. Further, the optimized nanoparticles also exhibited controlled increase in weight as compared to Metformin. The biochemistry profile of rats treated with nanoformulation reduced the levels of several pathological biomarkers, indicating additional benefits of MYR. Histopathological images exhibited no toxicity or changes in the major organs section in contrast to normal control, suggesting safe oral administration of the encapsulated MYR. Thus, we conclude that MYR-CHT-NPs represent an attractive delivery vehicle in improving the blood glucose level with controlled weight and have the potential to be safely administered orally for the management of T2DM.

WZB117 Decorated Metformin-Carboxymethyl Chitosan Nanoparticles for Targeting Breast Cancer Metabolism

The "Warburg effect" provides a novel method for treating cancer cell metabolism. Overexpression of glucose transporter 1 (GLUT1), activation of AMP-activated protein kinase (AMPK), and downregulation of mammalian target of rapamycin (mTOR) have been identified as biomarkers of abnormal cancer cell metabolism. Metformin (MET) is an effective therapy for breast cancer (BC), but its efficacy is largely reliant on the concentration of glucose at the tumor site. We propose a WZB117 (a GLUT1 inhibitor)-OCMC (O-carboxymethyl-chitosan)-MET combo strategy for simultaneous GLUT1 and mTOR targeting for alteration of BC metabolism. WZB117 conjugated polymeric nanoparticles were 225.67 ± 11.5 nm in size, with a PDI of 0.113 ± 0.16, and an encapsulation of 72.78 6.4%. OCMC pH-dependently and selectively releases MET at the tumor site. MET targets the mTOR pathway in cancer cells, and WZB117 targets BCL2 to alter GLUT1 at the cancer site. WZB117-OCMC-MET overcomes the limitations of MET monotherapy by targeting mTOR and BCL2 synergistically. WZB117-OCMC-MET activates AMPK and suppresses mTOR in a Western blot experiment, indicating growth-inhibitory and apoptotic characteristics. AO/EB and the cell cycle enhance cellular internalization as compared to MET alone. WZB117-OCMC-MET affects cancer cells' metabolism and is a promising BC therapeutic strategy.

Nanoencapsulated Extract of a Red Seaweed (Rhodophyta) Species as a Promising Source of Natural Antioxidants

Marine seaweed species represent an important source of bioactive compounds possessing antioxidant activity. This study aimed at evaluating the antioxidant capacity of the Jania rubens algal extract by means of two antioxidant assays, i.e., 2,2-diphenyl-1-picrylhydrazyl and ferric-reducing antioxidant power. The seaweeds' total phenolic and flavonoid contents were also assayed as markers of antioxidant activity. To identify active agents responsible for the antioxidant activity, gas chromatography-mass spectrometry and liquid chromatography-mass spectrometry were used for comprehensive metabolites characterization. To enhance the Jania rubens efficacy, the extract was nanoencapsulated using an ionic gelation method by means of high-pressure homogenization. The optimum nanoformulation had a particle size of 161 nm, a ζ potential of 31.2 mV, a polydispersity index of 0.211, and entrapment efficiency of 99.7%. The in vitro phytochemicals' release profiles of Jania rubens chitosan nanoparticles in comparison to the concentration of the raw algal extract were studied by the dialysis bag diffusion method revealing that the extract was released in a controlled pattern. The results indicated the potential advantages of the encapsulated Jania rubens extract, with its potent antioxidant activity, for use in different applications where sustained release is useful.

Advances in Injectable In Situ-Forming Hydrogels for Intratumoral Treatment

Chemotherapy has been linked to a variety of severe side effects, and the bioavailability of current chemotherapeutic agents is generally low, which decreases their effectiveness. Therefore, there is an ongoing effort to develop drug delivery systems to increase the bioavailability of these agents and minimize their side effects. Among these, intratumoral injections using in situ-forming hydrogels can improve drugs' bioavailability and minimize drugs' accumulation in non-target organs or tissues. This review describes different types of injectable in situ-forming hydrogels and their intratumoral injection for cancer treatment, after which we discuss the antitumor effects of intratumoral injection of drug-loaded hydrogels. This review concludes with perspectives on the future applicability of, and challenges for, the adoption of this drug delivery technology.

Design expert as a statistical tool for optimization of 5-ASA-loaded biopolymer-based nanoparticles using Box Behnken factorial design

Background

The overall objective was to prepare a highly accurate nanocarrier system of mesalamine for the treatment of ulcerative colitis with increased therapeutic efficacy and targeting. In the formulation of nanocarrier systems, optimization is a critical process for understanding nanoformulation variables and quality aspects. The goal of the present work was to determine the effect of independent variables, i.e., the concentrations of chitosan, carboxymethyl inulin (CMI), and the drug on the response variables, i.e., particle size and percent entrapment efficiency of the mesalamine-loaded nanoparticle using the Box Behnken design (BBD). The correlation between the independent and dependent variables was investigated using the Design Expert generated mathematical equations, contour, and response surface designs.

Result

An optimized batch was developed using the ionotropic gel method with selected independent variables (A: + 1 level, B: 0 level, C: − 1 level) and the developed nanoparticles had a particle size of 184.18 nm, zeta potential 26.54 mV, and entrapment efficiency 88.58%. The observed responses were remarkably similar to the predicted values. The morphological studies revealed that the formulated nanoparticles were spherical, and the results of the FTIR and DSC studies indicated the drug-polymer compatibility. The nanoparticle showed less than 5% release in the pH 1.2. In the colonic region (pH 7.4), more than 80 % of the medication was released after 24 h. The kinetics study showed that the Higuchi and Korsemeyer-Peppas models had R2 values of 0.9426 and 0.9784 respectively, for the developed formulation indicating linearity, as revealed by the plots. This result justified the sustained release behavior of the formulation.

Conclusion

The mesalamine-loaded chitosan-CMI nanoparticle has been successfully developed using the ionotropic gelation method. The nanoparticles developed in this study were proposed to deliver the drug to its desired site. The developed nanoparticles were likely to have a small particle size with positive zeta potential and high percent drug entrapment. It could be stated from the results that BBD can be an active way for optimizing the formulation and that nanoparticles can be a potential carrier for delivering therapeutics to the colon.

Insights into the formation mechanisms and properties of pectin hydrogel physically cross-linked with chitosan nanogels

This study explores hydrogels based on the physical interaction between soluble pectin and chitosan nanogels. A simple technique for creating chitosan nanogels of controllable size was developed based on a two-step process: physical cross-linking with tripolyphosphate (TPP) and chemical cross-linking with genipin. The particles were stable at acidic pH, which allowed hydrogel formation. Thixotropy experiments demonstrated that the concentration but not the size of the nanogels strongly affected the gel shear modulus. The influence of the post-assembly conditions, including exposure to monovalent salts (NaCl, NaI, and NaF) and pH (2.5 or 5.5), on the gel swelling and mechanical properties was studied. Small angle x-ray scattering (SAXS) results provide evidence that these physical hydrogels are indeed a cross-linked network. These experiments provided insights into the influence of hydrogen bonds and electrostatic interactions on the gel network.

Protective Action of Jania rubens Nanoencapsulated Algal Extract in Controlling Vegetable Oils' Rancidity

The development of natural antioxidants that can mitigate oil oxidation is on the rise. Several antioxidants have been developed from natural terrestrial plants, with less emphasis on marine algae. Rancidity is a major degradative reaction limiting the shelf-life and deteriorating the quality of vegetable oils. The goal of this study was to evaluate the ability of the Jania rubens' (J. rubens) seaweed extract encapsulated by chitosan/tripolyphosphate in retarding lipids' oxidation in vegetable oils. To improve the J. rubens efficacy, the extract was nanoencapsulated using the ionic gelation method. A Box-Behnken design was applied for the optimization of the formulation variables (chitosan/tripolyphosphate amounts, homogenization time, and homogenization speed). The optimum nanoformulation was characterized by transmission electron microscopy. It had a particle size of 161 nm, zeta potential of 31.2 mV, polydispersity index of 0.211, and entrapment efficiency of 99.7%. The ability of the optimum formula to extend the shelf-life of vegetable oils was based on peroxide value and thiobarbituric acid assays. In addition, headspace solid-phase microextraction was applied to detect the oils' volatiles as secondary markers of rancidity. The results revealed that the nanoencapsulated algal extract considerably reduced the rate of oils' oxidation and that its activity was comparable to that of a widely used synthetic antioxidant.

TPP ionically cross-linked chitosan/PLGA microspheres for the delivery of NGF for peripheral nerve system repair

To control the release of nerve growth factor (NGF) in the injured peripheral nerve, NGF-loaded chitosan/PLGA composite microspheres ionically cross-linked by tripolyphosphate (TPP/Chitosan/PLGA-NGF) were prepared. The encapsulation efficiency of NGF ranged from 83.4 ± 1.5 % to 72.1 ± 1.6 % with TPP concentrations from 1 % to 10 %. Zeta potential and FT-IR analyses together with confocal microscopy demonstrated that multiple NGF-loaded PLGA microspheres were embedded in chitosan matrix, the mean size of TPP/Chitosan/PLGA-NGF microspheres ranged from 40.2 ± 3.4 to 49.3 ± 3.1 μm. The increase of TPP concentration improved the network stability and decreased the swelling ratio, resulting in the decreased NGF release from 67.7 ± 1.2 % to 45.7 ± 0.8 % in 49 days. The sustained release of NGF could promote PC12 cells differentiation and neurite growth in vitro. Moreover, in comparison with NGF solution without microencapsulation, TPP/Chitosan/PLGA-NGF microspheres enhanced sciatic nerve regeneration and prevented gastrocnemius muscle atrophy in rats. These results demonstrate the feasibility of using TPP/Chitosan/PLGA-NGF microspheres for neural tissue repair.

Implementation of two different experimental designs for screening and optimization of process parameters for metformin-loaded carboxymethyl chitosan formulation

Metformin (MET) was effectively encapsulated into O-carboxymethyl chitosan (O-CMC) polymeric formulation using an experimental design method. Six factors Plackett-Burman (PB) design was utilized to find the significant process parameters. Linear equations used to study the effect of each process parameters on particle size (PS), encapsulation efficiency (EE), and zeta potential (ZP) and the most influential three factors decided for further optimization. Optimization was carried out by implementing three-factor three-level Box-Behnken (BB) design. Mathematical models were generated by regression analysis for responses of PS, EE, and ZP. Two-step experimental design took into account for the preparation of optimized formulation with maximum %EE (72.78 ± 9.7%) and minimum PS (225.67 ± 5.53 nm) at optimum process conditions with a ZP of -5.22 mV for the nano-polymeric formulation in an economical matter by reduction chemical use and formulation time. Furthermore, the biological activity of the final formulation was determined by in vitro cytotoxicity study compared to free MET. The cytotoxicity result reveals that both pure drug and nano-formulation biocompatible with MCF10A non-tumorigenic cell line and lethal for the MCF7 cell line. These in vitro results were the first helpful step to further investigate O-CMC loaded MET nanoparticles in diagnostic and therapeutic applications of breast cancer.

Design, optimization and characterizations of chitosan fortified calcium alginate microspheres for the controlled delivery of dual drugs

Periodontal disease is chronic, highly prevalent infectious disease that requires prolonged and controlled delivery of antimicrobial agents into pockets. To achieve this objective, dual antimicrobials encapsulated chitosan fortified calcium alginate (CS-Ca-SA) microspheres were formulated by application of Plackett-Burman factorial design. The microspheres were optimized for particle size (PS), entrapment efficiency (EE) and drug release. The optimized microspheres presented average PS of 74-461 µm and EE of 62.45-86.20% with controlled drug delivery for 120 hours. FTIR disclosed successful complexation between SA and CS. DSC and XRD studies showed changes in the crystallinity of drugs in microspheres. Shape factor and SEM demonstrated spherical to pear-shaped microspheres. Release exponent >0.43 and high diffusion coefficients revealed non-Fickian-based diffusion-limited drug release. CS-Ca-SA microspheres exhibited surface pH of 6.5 ± 0.5, moderate swelling, less erosion and improved mucoadhesion over Ca-SA microspheres. Also, significant antimicrobial activity against Escherichia coli and Staphylococcus aureus and cytocompatibility with L929 cell lines were observed. Further, microspheres exhibited long-term stability on refrigeration. The outcomes of study supported the potential of dual polymer and dual drug-based biodegradable, stable, non-toxic, mucoadhesive, controlled and prolonged drug release microspheres as more patient compliant by administration into periodontal pockets for the management of periodontal disease.