Improved biopharmaceutical properties of carvedilol employing α-tocopheryl polyethylene glycol 1000 succinate-based self-emulsifying drug delivery system

Co-rotating twin screw process for continuous manufacturing of solid crystal suspension: A promising strategy to enhance the solubility, permeation and oral bioavailability of Carvedilol

Background: In the current work, co-rotating twin-screw processor (TSP) was utilized to formulate solid crystal suspension (SCS) of carvedilol (CAR) for enhancing its solubility, dissolution rate, permeation and bioavailability using mannitol as a hydrophilic carrier. Methods: In-silico molecular dynamics (MD) studies were done to simulate the interaction of CAR with mannitol at different kneading zone temperatures (KZT). Based on these studies, the optimal CAR: mannitol ratios and the kneading zone temperatures for CAR solubility enhancement were assessed. The CAR-SCS was optimized utilizing Design-of-Experiments (DoE) methodology using the Box-Behnken design. Saturation solubility studies and in vitro dissolution studies were performed for all the formulations. Physicochemical characterization was performed using differential scanning calorimetry , Fourier transform infrared spectroscopy, X-ray diffraction studies, and Raman spectroscopy analysis. Ex vivo permeation studies and in vivo pharmacokinetic studies for the CAR-SCS were performed. Stability studies were performed for the DoE-optimized CAR-SCS at accelerated stability conditions at 40 ºC/ 75% RH for three months. Results: Experimentally, the formulation with CAR: mannitol ratio of 20:80, prepared using a KZT of 120 ºC at 100 rpm screw speed showed the highest solubility enhancement accounting for 50-fold compared to the plain CAR. Physicochemical characterization confirmed the crystalline state of DoE-optimized CAR-SCS. In-vitro dissolution studies indicated a 6.03-fold and 3.40-fold enhancement in the dissolution rate of optimized CAR-SCS in pH 1.2 HCl solution and phosphate buffer pH 6.8, respectively, as compared to the pure CAR. The enhanced efficacy of the optimized CAR-SCS was indicated in the ex vivo and in vivo pharmacokinetic studies wherein the apparent permeability was enhanced 1.84-fold and bioavailability enhanced 1.50-folds compared to the plain CAR. The stability studies showed good stability concerning the drug content. Conclusions: TSP technology could be utilized to enhance the solubility, bioavailability and permeation of poor soluble CAR by preparing the SCS.

Sorafenib-Loaded PLGA-TPGS Nanosystems Enhance Hepatocellular Carcinoma Therapy Through Reversing P-Glycoprotein-Mediated Multidrug Resistance

Multidrug resistance (MDR) is a key determinant for hepatocellular carcinoma chemotherapy failure. P-glycoprotein is one of the main causes of MDR by causing drug efflux in tumor cells. In order to solve this thorny problem, we prepared a sorafenib-loaded polylactic acid-glycolic acid (PLGA) - D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) nanoparticles (SPTNs). SPTNs were successfully synthesized through an ultrasonic emulsion solvent evaporation method with a favourable encapsulation efficiency of 90.35%. SPTNs were almost spherical in shape with uniform particle size (215.70 ± 0.36 nm), narrow polydispersity index (0.27 ± 0.02) and negative surface charge (-26.01 ± 0.65 mV). In the cellular uptake assay, the intracellular coumarin-6 (C6) fluorescence of TPGS component-based PLGA nanoparticles (C6-PTNs) was 1.63-fold higher relative to that of PVA component-based PLGA nanoparticles (C6-PVNs). The half-maximal inhibitory concentration and apoptosis ratio of SPTNs against HepG2/MDR cells were 3.90 μM and 75.62%, respectively, which were notably higher than free SF and sorafenib-PLGA-PVA nanoparticles (SPVNs). The anti-drug efflux activities of SPTNs were assessed by the intracellular trafficking assay using verapamil as a P-gp inhibitor. SPTNs could effectively inhibit the drug efflux in tumor cells detected by flow cytometry, and suppressed relative MDR1 gene as well as P-glycoprotein expression in tumor cells. Attributed to the MDR reversion effect of SPTNs, the in vivo antitumor efficacy experiment showed that SPTNs significantly inhibited the tumor growth of HepG2/MDR xenograft-bearing nude mice, and obviously reduced the toxicity against liver and kidney compared with SF treatment. In summary, SPTNs, as highly efficient and safe antitumor nano delivery systems, showed promising potential for hepatocellular carcinoma therapy through reversing P-glycoprotein-mediated MDR. Graphical Abstract.

Mixed micelles formulation for carvedilol delivery: In-vitro characterization and in-vivo evaluation

Carvedilol (CAR) is a widely studied, beta and alpha-1 blocker, antihypertensive drug due to its poor water solubility and low oral bioavailability (25-35%). The aim of this work is to improve poor water solubility and the pharmacokinetic parameters of carvedilol by using an optimized and self-assembly prepared micelle formulation. Optimized micelle formulation composed of Pluronic® F127, D-α-tocopheryl polyethylene glycol 1000 succinate, L-cysteine HCl in a ratio of 4:3:3. Micellar size, polydispersity index, zeta potential, morphology, critical micelle concentration, thermal behaviors, in-vitro dissolution of micelles and pharmacokinetic parameters in rats were characterized in this study. Carvedilol aqueous solubility increased (up to 271-fold) as a result of its encapsulation within a mixed micelle formulation. The measured micellar sizes of blank and carvedilol loaded mixed micelles are lower than 30 nm with size distributions of 26.69 ± 2.93 nm and 24.16 ± 4.89 nm, respectively. Transmission electron microscopy revealed that the micelles were spherically shaped. There is a significant enhancement of carvedilol dissolution compared to commercially available tablet formulation (f2 < 50). The in-vivo test demonstrated that the t_1/2 and AUC_0-∞ values of micelles were approximately 10.89- and 2.65-fold greater than that of the commercial tablets, respectively. Based on our study, bring such applications into being may provide effective new drugs for treatment armamentarium of cardiovascular diseases and hypertension in near future.

Preparation and in vitro/in vivo evaluation of a self-microemulsifying drug delivery system containing chrysin

OBJECTIVE

To prepare a self-microemulsifying drug delivery system (SMEDDS) to increase the solubility and oral bioavailability of chrysin.

METHODS

The preparation conditions were determined using factor analysis method. Preliminarily screening was conducted using compatibility tests and pseudo-ternary phase diagram studies. The central composite design-response surface methodology was used to determine the maximum drug loading and optimize SMEDDS formation, as characterized by surface morphology, pH, diameter, polydispersity index (PDI), zeta potential, and phase type. In vitro release of chrysin-suspension and chrysin-SMEDDS was investigated using the bulk-equilibrium reverse dialysis bag technique. Short-term stability of chrysin-SMEDDS at high and low temperatures was assessed. Pharmacokinetic behaviors were evaluated after intragastric and intravenous administration to rats.

RESULTS

The final optimal formulation was medium chain triglyceride:oleic acid:Cremophor RH40: Transcutol HP (w/w) (12%:12%:32%:44%), with a drug loading capacity of 5 mg/g. Diluted chrysin-SMEDDS was characterized as an oil-in-water type and spherical, with a diameter, pH, PDI, and zeta potential of 28.26 ± 0.83 nm, 5.60 ± 0.84, 0.18 ± 0.01, and -23.13 ± 0.95 mV, respectively. The release speed of chrysin-SMEDDS was significantly higher than that of chrysin-suspension, and the release process was not affected by the media pH. In vivo pharmacokinetic data revealed that the oral bioavailability of chrysin-SMEDDS was 2.7-fold higher than that of chrysin suspension, compared with the chrysin microemulsion.

CONCLUSION

The optimal SMEDDS formulation increased the dissolution and oral bioavailability of chrysin and may be useful for investigating chrysin efficacy in animal disease models and toxicokinetic studies.

Self-emulsifying drug delivery system of (R)-α-lipoic acid to improve its stability and oral absorption

The present study was designed to develop a self-emulsifying drug delivery system (SEDDS) of (R)-α-lipoic acid (RLA) to improve the physicochemical and nutraceutical properties of RLA. RLA/SEDDS was prepared using medium-chain triglycerides, Tween 80, and polyethylene glycol 400 as oil, surfactant, and co-surfactant, respectively. The preferable composition of SEDDS was selected according to a pseudo-ternary phase diagram for improved emulsification properties, and its physicochemical and pharmacokinetic properties were evaluated. RLA/SEDDS showed the immediate formation of fine micelles with a mean droplet size of approximately 260 nm when introduced into aqueous media. In simulated gastric fluid, this system could significantly improve the dissolution behavior of RLA and prevent the degradation of RLA, possibly due to the encapsulation of RLA into the emulsion structure. Following the oral administration of RLA/SEDDS (10 mg RLA/kg) in rats, systemic exposure to RLA and dihydrolipoic acid (DHLA), a reduced form of RLA, increased by 7- and 3-fold, respectively. The improved dissolution and gastric stability of RLA could contribute to enhancing systemic exposure to RLA and DHLA after oral administration. From these findings, RLA/SEDDS might be an efficacious dosage option for improving the oral bioavailability as well as nutraceutical properties of RLA.

Impact of drying on dissolution behavior of carvedilol-loaded sustained release solid dispersion: development and characterization

Purpose

The present study aimed to develop carvedilol (CAR)-loaded (25% w/w) sustained release solid dispersion (SRSD), for enhanced dissolution and to explore the applicability of different industrially accessible drying techniques.

Methods

SRSD-CAR containing different ratios of polymers were prepared and physicochemically characterized. Dissolution study was carried out in both sink and supersaturated conditions to identify the possible enhancement in dissolution behavior.

Results

Based on the solubility study, Kolliphor® P188 and Eudragit® RSPO (50:25, % w/w) ratio exhibited the highest solubility among the samples and was chosen as the optimal composition of SRSD-CAR for further characterization. The crystallinity assessments of the optimized formulation indicated amorphization of CAR in the formulation, bring about improved solubility of CAR. The infrared spectroscopic study revealed minor transitions; demonstrating the absence of significant interactions between drug and carrier. Furthermore, the SRSD-CAR exhibited immediate formation of nano particles when dispersed in water. Dissolution study revealed significant improvement in dissolution behavior, with a release of CAR in a gradual manner compared to crystalline CAR. From the dissolution kinetics analysis, the Korsmeyer Peppas model fit the best and diffusion was predominant in release of CAR. The drug release pattern showed insignificant differences between the SRSD-CAR formulations prepared by rotary vacuum drying and freeze drying.

Conclusion

From these experimental findings, SRSD approach might be a favorable dosage option for CAR, offering improved biopharmaceutical properties.

Dendrimers: Amazing Platforms for Bioactive Molecule Delivery Systems

Today, dendrimers are the main nanoparticle applied to drug delivery systems. The physicochemical characteristics of dendrimers and their versatility structural modification make them attractive to applied as a platform to bioactive molecules transport. Nanoformulations based on dendrimers enhance low solubility drugs, arrival to the target tissue, drugs bioavailability, and controlled release. This review describes the latter approaches on the transport of bioactive molecules based on dendrimers. The review focus is on the last therapeutic strategies addressed by dendrimers conjugated with bioactive molecules. A brief review of the latest studies in therapies against cancer and cardiovascular diseases, as well as future projections in the area, are addressed.