Engineered PLGA microspheres for extended release of brexpiprazole: in vitro and in vivo studies

NGF-BMSC-SF/CS composites for repairing knee joint osteochondral defects in rabbits: evaluation of the repair effect and potential underlying mechanisms

BACKGROUND

With the rapid growth of the ageing population, chronic diseases such as osteoarthritis have become one of the major diseases affecting the quality of life of elderly people. The main pathological manifestation of osteoarthritis is articular cartilage damage. Alleviating and repairing damaged cartilage has always been a challenge. The application of cartilage tissue engineering methods has shown promise for articular cartilage repair. Many studies have used cartilage tissue engineering methods to repair damaged cartilage and obtained good results, but these methods still cannot be used clinically. Therefore, this study aimed to investigate the effect of incorporating nerve growth factor (NGF) into a silk fibroin (SF)/chitosan (CS) scaffold containing bone marrow-derived mesenchymal stem cells (BMSCs) on the repair of articular cartilage defects in the knees of rabbits and to explore the possible underlying mechanism involved.

MATERIALS AND METHODS

Nerve growth factor-loaded sustained-release microspheres were prepared by a double emulsion solvent evaporation method. SF/CS scaffolds were prepared by vacuum drying and chemical crosslinking. BMSCs were isolated and cultured by density gradient centrifugation and adherent culture. NGF-SF/CS-BMSC composites were prepared and implanted into articular cartilage defects in the knees of rabbits. The repair of articular cartilage was assessed by gross observation, imaging and histological staining at different time points after surgery. The repair effect was evaluated by the International Cartilage Repair Society (ICRS) score and a modified Wakitani score. In vitro experiments were also performed to observe the effect of different concentrations of NGF on the proliferation and directional differentiation of BMSCs on the SF/CS scaffold.

RESULTS

In the repair of cartilage defects in rabbit knees, NGF-SF/CS-BMSCs resulted in higher ICRS scores and lower modified Wakitani scores. The in vitro results showed that there was no significant correlation between the proliferation of BMSCs and the addition of different concentrations of NGF. Additionally, there was no significant difference in the protein and mRNA expression of COL2a1 and ACAN between the groups after the addition of different concentrations of NGF.

CONCLUSION

NGF-SF/CS-BMSCs improved the repair of articular cartilage defects in the knees of rabbits. This repair effect may be related to the early promotion of subchondral bone repair.

A bilayer bioengineered patch with sequential dual-growth factor release to promote vascularization in bladder reconstruction

Bladder tissue engineering holds promise for addressing bladder defects resulting from congenital or acquired bladder diseases. However, inadequate vascularization significantly impacts the survival and function of engineered tissues after transplantation. Herein, a novel bilayer silk fibroin (BSF) scaffold was fabricated with the capability of vascular endothelial growth factor (VEGF) and platelet derived growth factor-BB (PDGF-BB) sequential release. The outer layer of the scaffold was composed of compact SF film with waterproofness to mimic the serosa of the bladder. The inner layer was constructed of porous SF matrix incorporated with SF microspheres (MS) loaded with VEGF and PDGF-BB. We found that the 5% (w/v) MS-incorporated scaffold exhibited a rapid release of VEGF, whereas the 0.2% (w/v) MS-incorporated scaffold demonstrated a slow and sustained release of PDGF-BB. The BSF scaffold exhibited good biocompatibility and promoted endothelial cell migration, tube formation and enhanced endothelial differentiation of adipose derived stem cells (ADSCs) in vitro. The BSF patch was constructed by seeding ADSCs on the BSF scaffold. After in vivo transplantation, not only could the BSF patch facilitate the regeneration of urothelium and smooth muscle, but more importantly, stimulate the regeneration of blood vessels. This study demonstrated that the BSF patch exhibited excellent vascularization capability in bladder reconstruction and offered a viable functional bioengineered patch for future clinical studies.

Population pharmacokinetics of rotigotine extended-release microspheres for intramuscular injection in patients with early-stage Parkinson's disease

AIMS

Rotigotine extended-release microspheres is a weekly intramuscular injection formulation to treat Parkinson's disease. This study aimed to develop a population pharmacokinetics (PK) model for rotigotine extended-release microspheres to investigate its PK ethnic differences.

METHODS

Data for the study were obtained from three studies in China, Japan and the US. The population PK model was developed using the Phoenix NLME 8.3.5 software. Two parallel absorption models were created to include both zero- and first-order absorptions. The elimination phase was evaluated for one- and two-compartment linear models. Moreover, covariates including sex, body weight, body mass index, albumin, creatinine clearance and race were input into the model using a stepwise covariate method.

RESULTS

We constructed a one-compartment linear model with the first parallel absorption model identified as the best-fitting model. Simulation results in patients with lighter body weight (45 kg) exhibited a 27% increase in Cmax,ss and a 31% increase in AUCtau,ss compared to those with median body weight (65 kg). Patients with heavier body weight (103 kg) showed a 27% decrease in Cmax,ss and a 29% decrease in AUCtau,ss compared to the median body weight group. Asian patients displayed only a 21% increase in Cmax,ss and a 6% increase in AUCtau,ss compared to non-Asian. While we could not fully conclude that race does not affect rotigotine exposure, dosage adjustments based on race were not deemed necessary.

CONCLUSIONS

Exposure differences were mainly attributed to body weight, while dose adjustments were not needed for patients of different racial identities.

Ropivacaine microsphere-loaded electroconductive nerve dressings for long-acting analgesia and functional recovery following diabetic peripheral nerve injury

In recent years, electroconductive hydrogels (ECHs) have shown great potential in promoting nerve regeneration and motor function recovery following diabetic peripheral nerve injury (PNI), attributed to their similar electrical and mechanical characteristics to innate nervous tissue. It is well-established that PNI causes motor deficits and pain, especially in diabetics. Current evidence suggests that ropivacaine (ROP) encapsulated in poly lactic-co-glycolic acid (PLGA) microspheres (MSs) yield a sustained analgesic effect. In this study, an ECH electroconductive network loaded with MS/ROP (ECH-MS/ROP) was designed as a promising therapeutic approach for diabetic PNI to exert lasting analgesia and functional recovery. This dual delivery system allowed ROP's slow and sequential release, achieving sustained analgesia as demonstrated by our in vivo experiments. Meanwhile, this system was designed like a lamellar dressing, with desirable adhesive and self-curling properties, convenient for treating injured nerve tissues via automatically wrapping tube-like structures, facilitating the process of implantation. Our in vitro assays verified that ECH-MS/ROP was able to enhance the adhesion and motility of Schwann cells. Besides, both in vitro and in vivo studies substantiated that ECH-MS/ROP stimulated myelinated axon regeneration through the MEK/ERK signaling pathway, thereby improving muscular denervation atrophy and facilitating functional recovery. Therefore, this study suggests that the ECH-MS/ROP dressing provides a promising strategy for treating diabetic PNI to facilitate nerve regeneration, functional recovery and pain relief.

DEC-205 receptor targeted poly(lactic-co-glycolic acid) nanoparticles containing Eucommia ulmoides polysaccharide enhances the immune response of foot-and-mouth disease vaccine in mice

Nanoparticles targeting the DEC-205 receptor were found to induce antigen-specific protective immune response. When the delivery system carries both antigens and immunomodulators, it can maximize the expected therapeutic effect of the drug and induce effective humoral and cellular immune responses to antigens.In this study, we encapsulated the Eucommia ulmoides Oliv. polysaccharides (EUPS) into PLGA nanoparticles (NPs) and conjugated it with anti-CD205 monoclonal Ab (MAb) to produce a DEC-205 receptor targeted PLGA nanoparticles (anti-DEC-205-EUPS-PLGA NPs). The physicochemical characteristics and adjuvant activity of the above NPs were evaluated in vitro and in vivo. In the in vitro setting, 200 μg·mL^-1 anti-DEC-205-EUPS-PLGA could improve the proliferation of DCs and promote their antigen up-take activity. In the in vivo setting, anti-DEC-205-EUPS-PLGA NPs remarkably controlled the release of drug and antigen to induce sustained immune responses and up-regulated the levels of FMDV-specific IgG antibodies, promoted the cytotoxic activity of CTLs and NK cells, and improved the proliferation of splenocytes. Moreover, the anti-DEC-205-EUPS-PLGA NPs facilitated the maturation of DCs. The above data indicated that anti-DEC-205-EUPS-PLGA NPs employed as an targeted adjuvant induced the humoral and cellular immune activity by promoting the maturation of DCs. These findings may provide a new insight onto the development of vaccine adjuvants.

Engineered PLGA microspheres for extended-release of naltrexone: in vitro, in vivo, and IVIVR

Poly(lactide-co-glycolide) (PLGA)-based formulation is one of the most often used parenteral extended-release forms to deliver various therapeutics. VIVITROL^® as a commercialized PLGA microsphere formulation encapsulates naltrexone, a narcotic antagonist for opioid addiction and alcohol dependency. However, no U.S. Food and Drug Administration-approved generic product of naltrexone PLGA microsphere formulation has entered the market. The availability of generic naltrexone PLGA microspheres in low-income countries will broaden patients' accessibility to the safe, effective, and more affordable drug. A major challenge in developing such generic forms is the sensitivity of the drug-loaded microspheres' critical characteristics to the small manufacturing changes, even in formulations with the same compositions as the reference product. In this study, we evaluated the different key manufacturing parameters on the physicochemical, in vitro and in vivo release characteristics of naltrexone microspheres to develop a generic form of naltrexone PLGA microspheres. The selected formulations demonstrated a significant similarity in physicochemical characteristics and release profiles (f2 > 50) to the reference product, VIVITROL^®. A strong relationship was observed between in vitro release profile of naltrexone as against its corresponding in vivo profile. It helped to roughly predict the in vivo release behavior of the different manufactured formulations by their corresponding in vitro release profiles.