A UV-Vis Spectrophotometric Method for the Estimation of Aldehyde Groups in Periodate-Oxidized Polysaccharides Using2,4-Dinitrophenyl Hydrazine

Black rice anthocyanins nanoparticles based on bovine serum albumin and hyaluronic acid: Preparation, characterization, absorption and intestinal barrier function protection in Caco-2 monolayers

Black rice anthocyanins (BRA) nanoparticles (NPs) were prepared using hyaluronic acid (HA), oxidized hyaluronic acid (OHA) and bovine serum albumin (BSA) to enhance the absorption and bioactivity of anthocyanins (ACNs). Results showed that HA/OHA-BSA-BRA NPs had a spherical morphology and excellent dispensability, with hydrated radius ~ 500 nm, zeta potential ~ - 30 mV, and encapsulation efficiency ~21 %. Moreover, using in vitro gastrointestinal release assay, we demonstrated that both BRA-loaded NPs exhibited effective controlled release properties of ACNs, significantly enhancing the accessibility of ACNs to the intestine. Cellular experiments showed that both two NPs had good biocompatibility and increased uptake of BRA. Furthermore, in comparison to the free BRA group, both BRA NPs groups significantly decreased the TEER value and increased the expression of tight junction proteins (Claudin 1, Occludin and ZO-1) in Caco-2 cell monolayers with LPS-induced damage. Therefore, our study demonstrated that HA/OHA-BSA-BRA NPs are promising carriers of ACNs and can effectively prevent the LPS-induced intestinal barrier injury in vitro.

O-phthalaldehyde based quantification of polysaccharide modification in conjugate vaccines

Polysaccharide-based vaccines cannot stimulate long-lasting immune response in infants due to their inability to elicit a T-cell-dependent immune response. This has been addressed using conjugation technology, where conjugates were produced by coupling a carrier protein to polysaccharides using different conjugation chemistries, such as cyanylation, reductive amination, ethylene diamine reaction, and others. Many glycoconjugate vaccines that are manufactured using different conjugation technologies are already in the market for neonates, infants and young children (e.g., Haemophilus influenzae type-b, Streptococcus pneumoniae and Neisseria meningitidis vaccines), and all of them elicit a T-cell dependent immune response. To manufacture glycoconjugate vaccines, the capsular polysaccharide is first activated by converting its hydroxyl groups to aldehyde-, cyanyl-, or cyanate ester groups, depending on the conjugation chemistry selected. The oxidized and reduced aldehyde functional groups of the polysaccharides are subsequently reacted with the amino groups of carrier protein by reductive amination to form a stable amide bond. In CDAP-based conjugation, the polysaccharide -OH groups are activated to form cyanyl-, or cyanate ester groups to react with the amino groups of carrier protein and forms an isourea bond. Understanding the extent of polysaccharide activation/modification is essential since it directly influences the molar mass of the conjugate, its stability, and the immunogenicity of the product. Reported methods are available to estimate the aldehyde groups of polysaccharides generated by reductive amination. However, no method is available to quantify the cyanyl or cyanate ester (-OCN) groups generated by cyanylation with 1-cyano-4-dimethylaminopyridinium tetrafluoroborate (CDAP). We report a novel strategy using an O-phthalaldehyde (OPA) derivatization process followed by size-exclusion chromatography (SEC) high-performance liquid chromatography (HPLC) separation and UV detection. The cyanate ester groups on the activated polysaccharide directly reveal the extent of polysaccharide activation/modification and the residual activated groups in the purified conjugates. This method would be useful for conjugate vaccine manufacturing using CDAP chemistry.

Glycoproteins as a Platform for Making Proton-Conductive Free-Standing Biopolymers

Biopolymers are an attractive environmentally friendly alternative to common synthetic polymers, whereas primarily proteins and polysaccharides are the biomacromolecules that are used for making the biopolymer. Due to the breadth of side chains of such biomacromolecules capable of participating in hydrogen bonding, proteins and polysaccharide biopolymers were also used for the making of proton-conductive biopolymers. Here, we introduce a new platform for combining the merits of both proteins and polysaccharides while using a glycosylated protein for making the biopolymer. We use mucin as our starting point, whereas being a waste of the food industry, it is a highly available and low-cost glycoprotein. We show how we can use different chemical strategies to target either the glycan part or specific amino acids for both crosslinking between the different glycoproteins, thus making a free-standing biopolymer, as well as for introducing superior proton conductivity properties to the formed biopolymer. The resultant proton-conductive soft biopolymer is an appealing candidate for any soft bioelectronic application.

Dual acting acid-cleavable self-assembling prodrug from hyaluronic acid and ciprofloxacin: A potential system for simultaneously targeting bacterial infections and cancer

The incidence and of bacterial infections, and resulting mortality, among cancer patients is growing dramatically, worldwide. Several therapeutics have been reported to have dual anticancer and antibacterial activity. However, there is still an urgent need to develop new drug delivery strategies to improve their clinical efficacy. Therefore, this study aimed to develop a novel acid cleavable prodrug (HA-Cip) from ciprofloxacin and hyaluronic acid to simultaneously enhance the anticancer and antibacterial properties of Cip as a superior drug delivery system. HA-Cip was synthesised and characterised (FT-IR, HR-MS, and H1 NMR). HA-Cip generated stable micelles with an average particle size, poly dispersion index (PDI) and zeta potential (ZP) of 237.89 ± 25.74 nm, 0.265 ± 0.013, and -17.82 ± 1.53 mV, respectively. HA-Cip showed ≥80 % cell viability against human embryonic kidney 293 cells (non-cancerous cells), ˂0.3 % haemolysis; and a faster pH-responsive ciprofloxacin release at pH 6.0. HA-Cip showed a 5.4-fold improvement in ciprofloxacin in vitro anticancer activity against hepatocellular cancer (HepG2) cells; and enhanced in vitro antibacterial activity against Escherichia coli and Klebsiella pneumoniae at pH 6.0. Our findings show HA-Cip as a promising prodrug for targeted delivery of ciprofloxacin to efficiently treat bacterial infections associated, and/or co-existing, with cancer.

Development and characterization of a novel conjugated methamphetamine vaccine

BACKGROUND

Methamphetamine (METH) addiction is a major public health concern globally with limited management options. The development of a METH vaccine through hapten design has received significant attention as a promising platform for the potential treatment of METH addiction and overdose, however there is yet to be a successful candidate in human trials.

RESEARCH DESIGN AND METHODS

In this study, we developed a novel conjugated METH vaccine using oxidized mannan (a polymannose) as an immunogenic carrier. A METH hapten was synthesized by using amphetamine and conjugated to mannan with a (Lysine-Glycine-Lysine-Glycine-lysine-Glycine-Lysine-Glycine-Lysine-Glycine) (KG)₅ peptide linker.

RESULTS

The reaction between amphetamine and (KG)₅, oxidation of mannan, and conjugation of amphetamine-(KG)₅ with oxidized mannan were confirmed by color tests, Fourier-transform infrared spectroscopy, gas and liquid chromatography mass spectrometry, thin-layer chromatography, and ultraviolet spectrophotometer. Additionally, the ability of the vaccine to generate antibodies was confirmed in C57BL/6 mice.

CONCLUSIONS

The successful development and characterization of the METH-mannan conjugate vaccine, provides a potential therapeutic intervention to curb METH substance use disorders. Each step of vaccine development was characterized to aid in future research on these vaccines, and the immunogenicity shown in the animal models supports future evaluation of the approach. Future studies of the conjugated METH vaccine should evaluate the efficacy in animal models of acute and chronic METH to pave the way for human studies.

Cross-linked cyclodextrin glucanotransferase aggregates from Bacillus lehensis G1 for cyclodextrin production: Molecular modeling, developmental, physicochemical, kinetic and thermodynamic properties

Type of cross-linking agents influence the stability and active cross-linked enzyme aggregates (CLEA) immobilization. The information of molecular interaction between enzyme-cross linker is not well explored thus screening wide numbers of cross-linker is crucial in CLEA development. This study combined the molecular modeling and experimental optimization to investigate the influences of different cross-linking agents in developing CLEA of cyclodextrin glucanotranferase G1 (CGTase G1) for cyclodextrins (CDs) synthesis. Seven types of cross-linkers were tested and CGTase G1 cross-linked with chitosan (CS-CGTG1-CLEA) displayed the highest activity recovery (84.6 ± 0.26%), aligning with its highest binding affinity, radius of gyration and flexibility through in-silico analysis towards CGTase G1. CS-CGTG1-CLEA was characterized and showed a longer half-life (30.06 ± 1.51 min) and retained a greater thermal stability (52.73 ± 0.93%) after 30 min incubation at optimal conditions compared to free enzyme (10.30 ± 1.34 min and 5.51 ± 2.10% respectively). CS-CGTG1-CLEA improved CDs production by 33% and yielded cumulative of 52.62 g/L CDs after five cycles for 2 h of reaction. This study reveals that abundant of hydroxyl group on chitosan interacted with CGTase G1 surface amino acid residues to form strong and stable CLEA thus can be a promising biocatalyst in CDs production.

Surface Modification of Decellularized Natural Cellulose Scaffolds with Organosilanes for Bone Tissue Regeneration

The utility of plant tissues as scaffolding materials has been gaining significant interest in recent years owing to their unique material characteristics that are ideal for tissue regeneration. In this study, the degradation and biocompatibility of natural cellulosic scaffolds derived from Borassus flabellifer (Linn.) (BF) immature endosperm was improved by chemical oxidation and surface functionalization processes. Briefly, thus obtained cellulosic scaffolds were sequentially processed via a detergent exchange decellularization process followed by sodium periodate mediated oxidation and organosilane-based surface modification using amino (NH₂)-terminated 3-aminopropyltriethoxysilane (APTES) and methyl (CH₃)-terminated octadecyltrichlorosilane (OTS). Post oxidation and surface functionalization, the scaffolds showed improved physiochemical, morphological, and mechanical properties. Especially, the swelling capacity, total porosity, surface area, degradation kinetics, and mechanical behavior of scaffold were significantly higher in modified scaffold groups. The biocompatibility analysis demonstrated excellent cellular adhesion, proliferation and differentiation of osteoblasts with an evident upregulation of mineralization. Subcutaneous implantation of these scaffolds in a rat model demonstrated active angiogenesis, enhanced degradation, and excellent biocompatibility with concomitant deposition of a collagen matrix. Taken together, the native cellulosic scaffolds post chemical oxidation and surface functionalization can exclusively integrate the potential properties of native soft tissue with ameliorated in vitro and in vivo support in bone tissue engineering for nonloading bearing applications.

Tissue Engineering of Cartilage Using Collagen Scaffold Enriched with Plant Polysaccharides

Degenerative diseases associated with articular cartilage pose a huge burden on health care economics. The nature of the tissue involved and the changes therein do not allow self-healing; and most of these problems are progressive. Tissue engineering offers some solutions provided we focus on the right kind of cells and the appropriate surrounding niches created for a particular tissue. The present study deals with the formation of polysaccharide rich stable scaffold of collagen after cross-linking with oxidized gum arabic. The scaffold was tested for its biocompatibility and ability to support cells. The in vitro cytotoxicity of the scaffolds toward induced pluripotent stem cells and chondrocytes was evaluated. Evaluation of expression of lineage specific markers indicates differentiation of induced pluripotent stem cells to chondrogenic lineage and maintenance of chondrocytes per se when grown in the scaffold. Animal studies were carried out to study the efficacy of the scaffold to repair the knee injuries. Cells along with the scaffold appeared to be the best filling, in repair of injured cartilage. These studies show that these scaffolds are potential candidates in applications such as tissue engineering of cartilage.

Cellulosic/Polyvinyl Alcohol Composite Hydrogel: Synthesis, Characterization and Applications in Tissue Engineering

The biomedical field still requires composite materials for medical devices and tissue engineering model design. As part of the pursuit of non-animal and non-proteic scaffolds, we propose here a cellulose-based material. In this study, 9%, 18% and 36% dialdehyde-functionalized microcrystalline celluloses (DAC) were synthesized by sodium periodate oxidation. The latter was subsequently coupled to PVA at ratios 1:2, 1:1 and 2:1 by dissolving in N-methyl pyrrolidone and lithium chloride. Moulding and successive rehydration in ethanol and water baths formed soft hydrogels. While oxidation effectiveness was confirmed by dialdehyde content determination for all DAC, we observed increasing hydrolysis associated with particle fragmentation. Imaging, FTIR and XDR analysis highlighted an intertwined DAC/PVA network mainly supported by electrostatic interactions, hemiacetal and acetal linkage. To meet tissue engineering requirements, an interconnected porosity was optimized using 0-50 µm salts. While the role of DAC in strengthening the hydrogel was identified, the oxidation ratio of DAC showed no distinct trend. DAC 9% material exhibited the highest indirect and direct cytocompatibility creating spheroid-like structures. DAC/PVA hydrogels showed physical stability and acceptability in vivo that led us to propose our DAC 9%/PVA based material for soft tissue graft application.

Tissue engineering of collagen scaffolds crosslinked with plant based polysaccharides

Ideally, a bioscaffold should mimic the characteristics of an extracellular matrix of a living organ of interest. The present study deals with the formation of composite scaffolds of collagen with gum arabic. Collagen was cross-linked with oxidized gum arabic having aldehyde groups to form a porous block. By changing the oxidation level of gum arabic, incorporation of the polysaccharides into the scaffold could be varied resulting in scaffolds with variable polysaccharide to protein content. A series of scaffolds were made by altering collagen concentration and oxidation level of gum arabic. The scaffolds were tested for their physical properties, stability, biocompatibility and ability to support the cell growth. Results implied that variable polysaccharide incorporation into the scaffolds was possible depending on the oxidation level of gum arabic which could influence the swelling behavior. The scaffolds showed non-toxic behavior towards the mesenchymal stem cells and nucleus pulposa cells using viability assay in culture conditions up to 30 days; the growth of cells was seen at all combinations of gels. Nucleus pulposa cells were able to maintain their phenotype in the GACO gels. The studies show that these scaffolds are potential candidates in applications, such as tissue engineering, and can be designed to match the requirement of different cell/tissues as per their ECM.

Review: Periodate oxidation of wood polysaccharides-Modulation of hierarchies

Periodate oxidation of polysaccharides has transitioned from structural analysis into a modification method for engineered materials. This review summarizes the research on this topic. Fibers, fibrils, crystals, and molecules originating from forests that have been subjected to periodate oxidation can be crosslinked with other entities via the generated aldehyde functionality, that can also be oxidized or reduced to carboxyl or alcohol functionality or used as a starting point for further modification. Periodate-oxidized materials can be subjected to thermal transitions that differ from the native cellulose. Oxidation of polysaccharides originating from forests often features oxidation of structures rather than liberated molecules. This leads to changes in macro, micro, and supramolecular assemblies and consequently to alterations in physical properties. This review focuses on these aspects of the modulation of structural hierarchies due to periodate oxidation.

Decellularization and oxidation process of bamboo stem enhance biodegradation and osteogenic differentiation

Many features that are appropriate for an ideal tissue engineered biomaterial are found in plant tissues. Hierarchically organized Bambusa vulgaris exhibits structural similarities to native bone, but the degradation of cellulose that is the main component of the plant cell wall is a challenge. In this study, Bamboo stem was subjected to decellularization followed by a chemical oxidation process (treated with sodium periodate) to enhance biocompatibility and biodegradation. The crystallinity of oxidised plant scaffolds was reduced, resulting in lower mechanical strength. In contrast, hydrophilicity was enhanced in those scaffolds. In vitro studies demonstrated better mesenchymal stem cell adhesion, viability, and osteogenic differentiation on oxidized scaffolds. Those scaffolds also induced angiogenesis, biocompatibility, and biodegradation when implanted subcutaneously in vivo. Hence, the present study demonstrated the usefulness of "oxidized decellularized plant" as bone scaffold for non-load-bearing applications.

Ulvan dialdehyde-gelatin hydrogels for removal of heavy metals and methylene blue from aqueous solution

Hydrogels based on the polysaccharide ulvan from the green macroalgae Ulva fenestrata were synthesized and evaluated as an adsorbent for heavy metals ions and methylene blue. Ulvan was extracted from Ulva fenestrata using diluted hydrochloric acid and recovered by precipitation with EtOH. The extracted ulvan was converted into ulvan dialdehyde via periodate-oxidation and subsequently combined with gelatin yielding hydrogels. The hydrogels showed good water-uptake capacity with a maximum swelling degree of 2400 % in water and 900 % in PBS buffer. Adsorption tests of methylene blue showed a maximum adsorption capacity of 465 mg/g. The adsorption data of methylene blue followed the pseudo-second order kinetics and agreed with the Langmuir adsorption isotherm. The maximum adsorption capacity of heavy metal ions was 14 mg/g for Cu²⁺, 7 mg/g for Co²⁺and 6 mg/g for Ni²⁺and Zn²⁺ indicating that the hydrogels have a stronger affinity for Cu²⁺ than for Co²⁺, Ni²⁺, and Zn²⁺.

Effect of bacterial nanocellulose binding on the bactericidal activity of bovine lactoferrin

Bovine lactoferrin (bLF) has been extensively described as a wide spectrum antimicrobial protein. bLF bactericidal activity has been mainly attributed to two different mechanisms: environmental iron depletion and cell membrane destabilization. Due to its antimicrobial properties, bLF has been included in the formulation nutraceutical food products and edible active packages. This work comprises the experimental evidence of the requirement of bLF unrestricted mobility ("free bLF") to effectively perform its bactericidal action. To assess the unrestricted and restricted bLF activity, a nontoxic matrix of bacterial nanocellulose (BNC) was used as carrier, and as an anchoring scaffold, respectively. Therefore, BNC was functionalized with bLF through two different methodologies: (i) bLF was embedded within the three-dimensional structure of BNC and; (ii) bLF was covalently bounded to the nanofibrils of BNC. bLF efficiency was tested against two bacteria isolated from clinical specimens, Escherichia coli and Staphylococcus aureus. bLF concentration after covalent binding to BNC was two-fold higher in comparison to the embedding method. Nevertheless, only the embedded bLF exhibited a significant bactericidal activity, due to bLF ability to permeate the BNC matrix and execute its bactericidal action.

Thin poly(vinyl alcohol) cryogels: reactive groups, macropores and translucency in microtiter plate assays

Thin macroporous poly(vinyl alcohol) (PVA) hydrogels were produced by cross-linking of PVA in a semi-frozen state with glutaraldehyde (GA) on glass slides or in the wells of microtiter plates. The 100-130 μm-thick gels were mechanically transferable, squamous translucent films with a high porosity of 7.2 ± 0.3 mL/g dry PVA i.e. similar to larger cylindrical PVA monoliths of the same composition. Additional treatment of the gels with 1% GA increased the aldehyde group content from 0.7 to 2.4 μmol/mL as estimated using dinitrophenylhydrazine (DNPH) reagent. Translucency of the gels allowed registration of UV-visible spectra of the DNPH-stained films. The catalytic activity of trypsin covalently immobilized on thin gels in the microtiter plates was estimated with chromogenic substrate directly in the wells, and indicated that the amount of protein immobilized was at least 0.34 mg/mL gel. Human immunoglobulin G (IgG) immobilized on thin gels at 0.1-10 mg/mL starting concentrations could be detected in a concentration-dependent manner due to recognition by anti-human rabbit IgG conjugated with peroxidase and photometric registration of the enzymatic activity. The results indicate good permeability of the hydrogel pores for macromolecular biospecific reagents and suggest applications of thin reactive PVA hydrogels in photometric analytical techniques.