Wheat germ lipase: isolation, purification and applications

Role of isotropic lipid phase in the fusion of photosystem II membranes

It has been thoroughly documented, by using 31P-NMR spectroscopy, that plant thylakoid membranes (TMs), in addition to the bilayer (or lamellar, L) phase, contain at least two isotropic (I) lipid phases and an inverted hexagonal (HII) phase. However, our knowledge concerning the structural and functional roles of the non-bilayer phases is still rudimentary. The objective of the present study is to elucidate the origin of I phases which have been hypothesized to arise, in part, from the fusion of TMs (Garab et al. 2022 Progr Lipid Res 101,163). We take advantage of the selectivity of wheat germ lipase (WGL) in eliminating the I phases of TMs (Dlouhý et al. 2022 Cells 11: 2681), and the tendency of the so-called BBY particles, stacked photosystem II (PSII) enriched membrane pairs of 300-500 nm in diameter, to form large laterally fused sheets (Dunahay et al. 1984 BBA 764: 179). Our 31P-NMR spectroscopy data show that BBY membranes contain L and I phases. Similar to TMs, WGL selectively eliminated the I phases, which at the same time exerted no effect on the molecular organization and functional activity of PSII membranes. As revealed by sucrose-density centrifugation, magnetic linear dichroism spectroscopy and scanning electron microscopy, WGL disassembled the large laterally fused sheets. These data provide direct experimental evidence on the involvement of I phase(s) in the fusion of stacked PSII membrane pairs, and strongly suggest the role of non-bilayer lipids in the self-assembly of the TM system.

Integration of Enzyme and Covalent Organic Frameworks: From Rational Design to Applications

Manufacturing is undergoing profound transformations, among which green biomanufacturing with low energy consumption, high efficiency, and sustainability is becoming one of the major trends. However, enzymes, as the "core chip" of biomanufacturing, are often handicapped in their application by their high cost, low operational stability, and nonreusability. Immobilization of enzymes is a technology that binds or restricts enzymes in a certain area with solid materials, allows them to still carry out their unique catalytic reaction, and allows them to be recycled and reused. Compared with free enzymes, immobilized enzymes boast numerous advantages such as enhanced storage stability, ease of separation, reusability, and controlled operation. Currently, commonly used supports for enzyme immobilization (e.g., mesoporous silica, sol-gel hydrogels, and porous polymer) can effectively improve enzyme stability and reduce product inhibition. However, they still face drawbacks such as potential leaching or conformational change during immobilization and poor machining performance. Especially, most enzyme carrier solid materials possess disordered structures, inevitably introducing deficiencies such as low loading capacity, hindered mass transfer, and unclear structure-property relationships. Additionally, it remains a notable challenge to meticulously design immobilization systems tailored to the specific characteristics of enzyme/reaction. Therefore, there is a significant demand for reliable solid materials to overcome the above challenges. Crystalline porous materials, particularly covalent organic frameworks (COFs), have garnered significant interest as a promising platform for immobilizing enzymes due to their unique properties, such as their crystalline nature, high porosity, accessible active sites, versatile synthetic conditions, and tunable structure. COFs create a stabilizing microenvironment that protects enzymes from denaturation and significantly enhances reusability. Nevertheless, some challenges still remain, including difficulties in loading large enzymes, reduced enzyme activities, and the limited functionality of carriers. Therefore, it is essential to develop innovative carriers and novel strategies to broaden the methods of immobilizing enzymes, enabling their application across a more diverse array of fields.The integration of enzymes with advanced porous materials for intensified performance and diverse applications is still in its infancy, and our group has done a series of pioneering works. This Account presents a comprehensive overview of recent research progress made by our group, including (i) the development of innovative enzyme immobilization strategies utilizing COFs to make the assembly and integration of enzymes and carriers more effective; (ii) rational design and construction of functional carriers for enzyme immobilization using COFs; and (iii) extensions of immobilized enzyme applications based on COFs from industrial catalysis to biomedicine and chiral separation. The integration of enzymes with functional crystalline materials offers mutual benefits and results in a performance that surpasses what either component can achieve individually. Additionally, immobilized enzymes exhibit enhanced functionality and intriguing characteristics that differ from those of free enzymes. Consistent with our research philosophy centered on integration, platform development, and engineering application, this Account addresses the critical challenges associated with enzyme immobilization using COFs while extending the applications of COFs and proposing future design principles for biomanufacturing and enzyme industry.

Process optimisation of defatted wheat germ protein extraction in a novel alkaline-based deep eutectic solvent (DES) via Box-Behnken experimental design (BBD)

This is the first study to provide a preliminary investigation into the recovery of protein from wheat germ and the prediction of their extraction conditions in microwave cavity using a novel DES solvent. The response surface methodology was used to predict the microwaved protein extraction conditions of the DWG. The effects of DES buffer-concentration (X₁: 0.01-1.00 g/mL), microwave power (X₂: 50-250 W), irradiation time (X₃: 1-5 min) and sample-to-buffer ratio (X₄: 1:10-1:50) were tested using a single factor and Box-Behnken experimental design. Under the optimized conditions (X₁ = 0.52 g/mL, X₂ = 186 W, X₃ = 3.28 min, and X₄ = 1:39) protein yield and absorbed microwave were obtained at the optimal value of 33.00 % and 677 J/min, respectively with no denaturation of the protein as validated from the SDS-PAGE gel electrophoresis profile. Consequently, this investigation provides a practical approach for the extraction of bioactive protein from DWG using a novel deep eutectic solvent.

Enzymatic Synthesis of a Novel Coumarin Aminophosphonates: Antibacterial Effects and Oxidative Stress Modulation on Selected E. coli Strains

The objective of the present study was to evaluate the synergistic effect of two important pharmacophores, coumarin and α-amino dimethyl phosphonate moieties, on antimicrobial activity toward selected LPS-varied E. coli strains. Studied antimicrobial agents were prepared via a Kabachnik-Fields reaction promoted by lipases. The products were provided with an excellent yield (up to 92%) under mild, solvent- and metal-free conditions. A preliminary exploration of coumarin α-amino dimethyl phosphonate analogs as novel antimicrobial agents was carried out to determine the basic features of the structure responsible for the observed biological activity. The structure-activity relationship revealed that an inhibitory activity of the synthesized compounds is strongly related to the type of the substituents located in the phenyl ring. The collected data demonstrated that coumarin-based α-aminophosphonates can be potential antimicrobial drug candidates, which is particularly crucial due to the constantly increasing resistance of bacteria to commonly used antibiotics.

Structural Entities Associated with Different Lipid Phases of Plant Thylakoid Membranes—Selective Susceptibilities to Different Lipases and Proteases

It is well established that plant thylakoid membranes (TMs), in addition to a bilayer, contain two isotropic lipid phases and an inverted hexagonal (H_II) phase. To elucidate the origin of non-bilayer lipid phases, we recorded the ³¹P-NMR spectra of isolated spinach plastoglobuli and TMs and tested their susceptibilities to lipases and proteases; the structural and functional characteristics of TMs were monitored using biophysical techniques and CN-PAGE. Phospholipase-A1 gradually destroyed all ³¹P-NMR-detectable lipid phases of isolated TMs, but the weak signal of isolated plastoglobuli was not affected. Parallel with the destabilization of their lamellar phase, TMs lost their impermeability; other effects, mainly on Photosystem-II, lagged behind the destruction of the original phases. Wheat-germ lipase selectively eliminated the isotropic phases but exerted little or no effect on the structural and functional parameters of TMs—indicating that the isotropic phases are located outside the protein-rich regions and might be involved in membrane fusion. Trypsin and Proteinase K selectively suppressed the H_II phase—suggesting that a large fraction of TM lipids encapsulate stroma-side proteins or polypeptides. We conclude that—in line with the Dynamic Exchange Model—the non-bilayer lipid phases of TMs are found in subdomains separated from but interconnected with the bilayer accommodating the main components of the photosynthetic machinery.

Promiscuous Lipase-Catalyzed Knoevenagel-Phospha-Michael Reaction for the Synthesis of Antimicrobial β-Phosphono Malonates

An enzymatic route for phosphorous–carbon bond formation was developed by discovering new promiscuous activity of lipase. We reported a new metal-free biocatalytic method for the synthesis of pharmacologically relevant β-phosphonomalononitriles via a lipase-catalyzed one-pot Knoevenagel–phospha–Michael reaction. We carefully analyzed the best conditions for the given reaction: the type of enzyme, temperature, and type of solvent. A series of target compounds was synthesized, with yields ranging from 43% to 93% by enzymatic reaction with Candida cylindracea (CcL) lipase as recyclable and, a few times, reusable catalyst. The advantages of this protocol are excellent yields, mild reaction conditions, low costs, and sustainability. The applicability of the same catalyst in the synthesis of β-phosphononitriles is also described. Further, the obtained compounds were validated as new potential antimicrobial agents with characteristic E. coli bacterial strains. The pivotal role of such a group of phosphonate derivatives on inhibitory activity against selected pathogenic E. coli strains was revealed. The observed results are especially important in the case of the increasing resistance of bacteria to various drugs and antibiotics. The impact of the β-phosphono malonate chemical structure on antimicrobial activity was demonstrated. The crucial role of the substituents attached to the aromatic ring on the inhibitory action against selected pathogenic E. coli strains was revealed. Among tested compounds, four β-phosphonate derivatives showed an antimicrobial activity profile similar to that obtained with currently used antibiotics such as ciprofloxacin, bleomycin, and cloxacillin. In addition, the obtained compounds constitute a convenient platform for further chemical functionalization, allowing for a convenient change in their biological activity profile. It should also be noted that the cost of the compounds obtained is low, which may be an attractive alternative to the currently used antimicrobial agents. The observed results are especially important because of the increasing resistance of bacteria to various drugs and antibiotics.

In Silico Evaluation of Enzymatic Tunnels in the Biotransformation of α-Tocopherol Esters

Motivation: α-Tocopherol is a molecule obtained primarily from plant sources that are important for the pharmaceutical and cosmetics industry. However, this component has some limitations such as sensitivity to oxygen, presence of light, and high temperatures. For this molecule to become more widely used, it is important to carry out a structural modification so that there is better stability and thus it can carry out its activities. To carry out this structural modification, some modifications are carried out, including the application of biotransformation using enzymes as biocatalysts. Thus, the application of a computational tool that helps in understanding the transport mechanisms of molecules in the tunnels present in the enzymatic structures is of fundamental importance because it promotes a computational screening facilitating bench applications.

Objective: The aim of this work was to perform a computational analysis of the biotransformation of α-tocopherol into tocopherol esters, observing the tunnels present in the enzymatic structures as well as the energies which correspond to the transport of molecules.

Method: To carry out this work, 9 lipases from different organisms were selected; their structures were analyzed by identifying the tunnels (quantity, conformation, and possibility of transport) and later the calculations of substrate transport for the biotransformation reaction in the identified tunnels were carried out. Additionally, the transport of the product obtained in the reaction through the tunnels was also carried out.

Results: In this work, the quantity of existing tunnels in the morphological conformational characteristics in the lipases was verified. Thus, the enzymes with fewer tunnels were RML (3 tunnels), LBC and RNL (4 tunnels), PBLL (5 tunnels), CALB (6 tunnels), HLG (7 tunnels), and LCR and LTL (8 tunnels) and followed by the enzyme LPP with the largest number of tunnels (39 tunnels). However, the enzyme that was most likely to transport substrates in terms of α-tocopherol biotransformation (in relation to the E_max and E_a energies of ligands and products) was CALB, as it obtains conformational and transport characteristics of molecules with a particularity. The most conditions of transport analysis were α-tocopherol tunnel 3 (E_max: −4.6 kcal/mol; E_a: 1.1 kcal/mol), vinyl acetate tunnel 1 (E_max: −2.4 kcal/mol; E_a: 0.1 kcal/mol), and tocopherol acetate tunnel 2 (E_max: −3.7 kcal/mol; E_a: 2 kcal/mol).

Current Status and Future Perspectives of Supports and Protocols for Enzyme Immobilization

The market for industrial enzymes has witnessed constant growth, which is currently around 7% a year, projected to reach $10.5 billion in 2024. Lipases are hydrolase enzymes naturally responsible for triglyceride hydrolysis. They are the most expansively used industrial biocatalysts, with wide application in a broad range of industries. However, these biocatalytic processes are usually limited by the low stability of the enzyme, the half-life time, and the processes required to solve these problems are complex and lack application feasibility at the industrial scale. Emerging technologies create new materials for enzyme carriers and sophisticate the well-known immobilization principles to produce more robust, eco-friendlier, and cheaper biocatalysts. Therefore, this review discusses the trending studies and industrial applications of the materials and protocols for lipase immobilization, analyzing their advantages and disadvantages. Finally, it summarizes the current challenges and potential alternatives for lipases at the industrial level.

Lipid Polymorphism of the Subchloroplast-Granum and Stroma Thylakoid Membrane-Particles. I. 31P-NMR Spectroscopy

Build-up of the energized state of thylakoid membranes and the synthesis of ATP are warranted by organizing their bulk lipids into a bilayer. However, the major lipid species of these membranes, monogalactosyldiacylglycerol, is a non-bilayer lipid. It has also been documented that fully functional thylakoid membranes, in addition to the bilayer, contain an inverted hexagonal (H_II) phase and two isotropic phases. To shed light on the origin of these non-lamellar phases, we performed ³¹P-NMR spectroscopy experiments on sub-chloroplast particles of spinach: stacked, granum and unstacked, stroma thylakoid membranes. These membranes exhibited similar lipid polymorphism as the whole thylakoids. Saturation transfer experiments, applying saturating pulses at characteristic frequencies at 5 °C, provided evidence for distinct lipid phases—with component spectra very similar to those derived from mathematical deconvolution of the ³¹P-NMR spectra. Wheat-germ lipase treatment of samples selectively eliminated the phases exhibiting sharp isotropic peaks, suggesting easier accessibility of these lipids compared to the bilayer and the H_II phases. Gradually increasing lipid exchanges were observed between the bilayer and the two isotropic phases upon gradually elevating the temperature from 5 to 35 °C, suggesting close connections between these lipid phases. Data concerning the identity and structural and functional roles of different lipid phases will be presented in the accompanying paper.