Structural studies by high-field NMR spectroscopy of a binary-addressed complementary oligonucleotide system juxtaposing pyrene and perfluoro-azide units

New concepts of fluorescent probes for specific detection of DNA sequences: bis-modified oligonucleotides in excimer and exciplex detection

The detection of single base mismatches in DNA is important for diagnostics, treatment of genetic diseases, and identification of single nucleotide polymorphisms. Highly sensitive, specific assays are needed to investigate genetic samples from patients. The use of a simple fluorescent nucleoside analogue in detection of DNA sequence and point mutations by hybridisation in solution is described in this study. The 5′-bispyrene and 3′-naphthalene oligonucleotide probes form an exciplex on hybridisation to target in water and the 5′-bispyrene oligonucleotide alone is an adequate probe to determine concentration of target present. It was also indicated that this system has a potential to identify mismatches and insertions. The aim of this work was to investigate experimental structures and conditions that permit strong exciplex emission for nucleic acid detectors, and show how such exciplexes can register the presence of mismatches as required in SNP analysis. This study revealed that the hybridisation of 5′-bispyrenyl fluorophore to a DNA target results in formation of a fluorescent probe with high signal intensity change and specificity for detecting a complementary target in a homogeneous system. Detection of SNP mutations using this split-probe system is a highly specific, simple, and accessible method to meet the rigorous requirements of pharmacogenomic studies. Thus, it is possible for the system to act as SNP detectors and it shows promise for future applications in genetic testing.

Target-assembled exciplexes based on Scorpion oligonucleotides

Scorpion probes, specific DNA probe sequences maintained in a hairpin–loop, can be modified to carry the components of an exciplex for use as a novel fluorescence-based method for specific detection of DNA. The exciplex partners (5′-pyrenyl and 3′-naphthalenyl) were attached to oligonucleotides via phosphoramidate links to terminal phosphate groups. Hybridization of the probe to a complementary target in a buffer containing trifluoroethanol produced an obvious fluorescence change from blue (pyrene locally excited state emission) to green (exciplex emission).

Detection of nucleic acids in situ: novel oligonucleotide analogues for target-assembled DNA-mounted exciplexes

This research describes the effects of structural variation and medium effects for the novel split-oligonucleotide (tandem) probe systems for exciplex-based fluorescence detection of DNA. In this approach the detection system is split at a molecular level into signal-silent components, which must be assembled correctly into a specific 3-dimensional structure to ensure close proximity of the exciplex partners and the consequent exciplex fluorescence emission on excitation. The model system consists of two 8-mer oligonucleotides, complementary to adjacent sites of a 16-mer DNA target. Each probe oligonucleotide is equipped with functions able to form an exciplex on correct, contiguous hybridization. This study investigates the influence of a number of structural aspects (i.e. chemical structure and composition of exciplex partners, length and structure of linker groups, locations of exciplex partner attachment, as well as effects of media) on the performance of DNA-mounted exciplex systems. The extremely rigorous structural demands for exciplex formation and emission required careful structural design of linkers and partners for exciplex formation, which are here described. Certain organic solvents (especially trifluoroethanol) specifically favour emission of the DNA-mounted exciplexes, probably the net result of the particular duplex structure and specific solvation of the exciplex partners. The exciplexes formed emitted at approximately 480 nm with large Stokes shifts ( approximately 130-140 nm). Comparative studies with pyrene excimer systems were also carried out.

Exciplex fluorescence emission from simple organic intramolecular constructs in non-polar and highly polar media as model systems for DNA-assembled exciplex detectors

Organic intramolecular exciplexes, N-(4-dimethylaminobenzyl)-N-(1-pyrenemethyl)amine (1) and N'-4-dimethylaminonaphthyl-N-(1-pyrenemethyl)amine (2), were used as model systems to reveal major factors affecting their exciplex fluorescence, and thus lay the basis for developing emissive target-assembled exciplexes for DNA-mounted systems in solution. These models with an aromatic pyrenyl hydrocarbon moiety as an electron acceptor appropriately connected to an aromatic dimethylamino electron donor component (N,N-dimethylaminophenyl or N,N-dimethylaminonaphthyl) showed strong intramolecular exciplex emission in both non-polar and highly polar solvents. The effect of dielectric constant on the maximum wavelength for exciplex emission was studied, and emission was observed for 1 and 2 over the full range of solvent from non-polar hydrocarbons up to N-methylformamide with a dielectric constant of 182. Quantum yields were determined for these intramolecular exciplexes in a range of solvents relative to that for Hoechst 33,258. Conformational analysis of 1 was performed both computationally and via qualitative 2D NMR using (1)H-NOESY experiments. The results obtained indicated the contribution of pre-folded conformation(s) to the ground state of 1 conducive to exciplex emission. This research provides the initial background for design of self-assembled, DNA-mounted exciplexes and underpins further development of exciplex-based hybridisation bioassays.

Target-assembled tandem oligonucleotide systems based on exciplexes for detecting DNA mismatches and single nucleotide polymorphisms

We report the first exciplex-based split-probe system for DNA detection. The detector is split at a molecular level into signal-silent components which, before a signal is generated, must be assembled correctly into a particular three-dimensional arrangement. The model system comprises of two 8-mer oligonucleotides, complementary to neighbouring sites of a 16-mer DNA target, each equipped with moieties able to form an exciplex on correct, contiguous hybridization. The exciplex emits at approximately 480 nm with a large Stokes shift (135 nm). The extremely rigorous structural demands for exciplex formation and emission were achieved by careful structural design and by the discovery that high levels of certain organic solvents (especially trifluoroethanol) specifically favour emission of the DNA-mounted exciplex, probably the net result of the particular duplex structure and specific solvation of the exciplex partners. Inserts and mismatches can be effectively detected by this exciplex construct giving potential for single nucleotide polymorphism detection.

An exciplex-based, target-assembled fluorescence system with inherently low background to probe for specific nucleic acid sequences

A novel detection technique, called ExciProbes, has been developed to proof-of-principle level for DNA oligonucleotides. The new approach is based on the use of two short oligonucleotides complementary to a target nucleic acid sequence. Each short-probe oligonucleotide bears the separated parts of a new class of fluorescence detector, an exciplex. These isolated parts of the detector have no inherent signal at the detection wavelength. They are designed to detect biotarget by being assembled by the target itself to give a new molecular entity (the exciplex), with a characteristic fluorescence and very large Stokes shift (typically >150 nm). The technique is not related to fluorescence resonance energy transfer, and can potentially resolve to 1 base pair. ExciProbes can detect single or double mutations in a short sequence of DNA, and can be combined with temperature-filtering to provide allelic discrimination of single nucleotide polymorphism analysis. Compared to other fluorophore systems that have large backgrounds (typically >60%), ExciProbes show backgrounds of <1% under comparable conditions, and can be used with DNA, RNA, or synthetic nucleic acids such as locked nucleic acid.

Binding of a porphyrin conjugate of Hoechst 33258 to DNA. I. UV-visible and melting studies detect multiple binding modes to a 12-mer nonself-complementary duplex

Relative to ligand-free duplex DNA, the melting temperature of the 1:1 complex of the duplex d(CGAATTGTATGC):d(GCATACAATTCG) with the conjugate of Hoechst 33258 with a des-metalloporphyrin, increased from 42 to 60.5 degrees C indicating strong ligand binding. UV-vis spectrophotometric titration detected more than one class of binding site (apparent dissociation constants approximately 0.2 microM for simple noncooperative binding and 1 microM for the simultaneous cooperative mode with Hill coefficient approximately 2).

Refined high-field NMR solution structure of a binary-addressed pyrene/perfluoro-azide complementary DNA oligonucleotide system shows extensive distortion in the central nick region

The structural analysis of the photoactivated binary system of complementary-addressing nucleic acid sequences (1:2:3) by high-resolution NMR spectroscopy and restrained molecular dynamics is reported. The binary system comprised a 12 base-pair target DNA sequence, pdGTATCAGTTTCT (1), and two hexanucleotides, (dAGAAACp-L-Az (2) and Pyr-pdTGATAC (3)), complementary to neighbouring sites in the target DNA. Oligonucleotide (2) is conjugated with a p-azidotetrafludrobenzyl group (Az) via a linker group (L), and the other oligonucleotide (3) is equipped with the photosensitizing pyrenyl-1-methylamino group (Pyr). We now extend the structural analysis of 1:2:3, which was previously based on qualitative 2D 1H-NMR data and thermodynamic analysis of complex formation from UV-visible thermal denaturation experiments. In the current work structural refinement was performed by separate molecular dynamics runs for six different starting structures based on 318 proton-proton distance-range constraints, evaluated from the 1H-NOESY spectrum (tau(mix) = 200 ms, 600 MHz) using complete relaxation matrix analysis (NMR/TRIAD/MARDIGRAS). Additional Watson-Crick hydrogen bond restraints were included in the calculations based on the detected signals from the exchangeable protons, using REFOPT(NY) methods. The final averaged structure obtained from the six refined co-ordinate sets showed a considerable degree of axis bend (62.5 degrees) with the bending point in the middle of the duplex in the region of the backbone nick between the two short oligonucleotides. The complex behaves dynamically as the equivalent of two short B-DNA-like duplexes displaying a hinge-like flexing at their junction. In all final structures the Pyr function location was very restricted, the aromatic group lying in the duplex minor groove near residues 4T, 5C and 2T. In contrast, the location of the perfluoroazido group was different in all the final structures, indicating the high flexibility of this group in the duplex. The only feature common to all six final azido group orientations was the outside location on the side of the major groove. The distance between the Pyr and Az groups varied from 11 A to 24 A for the six final structures (17 A, final average structure). The dynamics of duplex denaturation for 1:2:3 was probed by monitoring the temperature-induced NMR line broadening of the imino protons in a 1D variable temperature NMR experiment. The melting of 1:2:3 starts both from the ends and from the middle part of the duplex at the backbone break between the two short oligonucleotides reflecting the destabilisation of the pyrene-arylazido nick region in the duplex.

Structure of photoreactive binary system of oligonucleotide conjugates assembled on the target nucleotide sequence

Recently we have developed an approach to superspecific photomodification of nucleic acids by binary systems of oligonucleotides conjugated to precursor groups capable of assembling into photoactivatable structure upon simultaneous binding of the conjugates to the target. We have investigated the solution structure of a model binary system 1:2:3, where 1 is the target 12-mer 5'-pdGTATCAGTTTCT, 2 is the photoreactive conjugate 5'-dAGAAACp-NH(CH2)2NH-Az and 3 is the sensitizing conjugate 5'-Pyr-pdTGATAC (Az is p-azidotetrafluorobenzoyl group and Pyr is the pyrenyl-1-methylamino group). The photoreaction within this complex results in crosslinking of reagent 2 with N7-position of the G7 residue of the target thus indicating that the photoreactive Az residue is located in the major groove near the G7 residue. The center-to-center distances between the Pyr and Az moieties in complex 1:2:3 independently determined by the Pyr-group fluorescence quenching and the Az-group sensitized photodecomposition were 11.2 and 12.6 A, respectively.

Sensitized photomodification of mammalian DNA polymerase beta. A new approach for highly selective affinity labeling of polymerases

To enhance the specificity of polymerase photoaffinity labeling, a novel approach based on sensitized photomodification has been developed. A base-substituted analog of TTP containing a pyrene group (PyrdUTP) was synthesized and used as an active site-bound photosensitizer for photoaffinity modification of DNA polymerase beta (pol beta). 5'-[32P]-labeled primer was elongated in situ by pol beta with a photoreactive analog of TTP (FAB-4-dUTP). The pyrene sensitizer (PyrdUTP), excited by light (365-450 nm), can activate the photoreagent, cross-linking it to pol beta as a result of fluorescence resonance energy transfer. The initial rate of pol beta photomodification was shown to increase by a factor of ten. The selectivity of pol beta photosensitized modification was proved by adding human replication protein A.