Modelling of the mechanical and mass transport properties of auxetic molecular sieves: an idealised inorganic (zeolitic) host–guest system

An Anisotropic Auxetic 2D Metamaterial Based on Sliding Microstructural Mechanism

A new 2D microstructure is proposed herein in the form of rigid unit cells, each taking the form of a cross with two opposing crossbars forming slots and the other two opposing crossbars forming sliders. The unit cells in the microstructure are arranged in a rectangular array in which the nearest four neighboring cells are rotated by 90° such that a slider in each unit cell is connected to a slot from its nearest neighbor. Using a kinematics approach, the Poisson’s ratio along the axes of symmetry can be obtained, while the off-axis Poisson’s ratio is obtained using Mohr’s circle. In the special case of a square array, the results show that the Poisson’s ratio varies between 0 (for loading parallel to the axes) and −1 (for loading at 45° from the axes). For a rectangular array, the Poisson’s ratio varies from 0 (for loading along the axes) to a value more negative than −1. The obtained results suggest the proposed microstructure is useful for designing materials that permit rapid change in Poisson’s ratio for angular change.

Auxeticity of Concentric Auxetic-Conventional Foam Rods with High Modulus Interface Adhesive

While the rule of mixture is applicable for addressing the overall Poisson’s ratio of a concentrically aligned bi-layered rod under longitudinal loading, the same cannot be said for this rod under torsional loading due to the higher extent of deformation in the rod material further away from the torsional axis. In addition, the use of adhesives for attaching the solid inner rod to the hollow outer rod introduces an intermediate layer, thereby resulting in a tri-layered concentric rod if the adhesive layer is uniformly distributed. This paper investigates the effect of the adhesive properties on the overall auxeticity of a rod consisting of two concentrically aligned cylindrical isotropic foams with Poisson’s ratio of opposite signs under torsional loads. An indirect way for obtaining Poisson’s ratio of a concentrically tri-layered rod was obtained using a mechanics of materials approach. Results show that the auxeticity of such rods is influenced by the adhesive’s stiffness, Poisson’s ratio, thickness, and radius from the torsional axis.

ANALYSIS OF AUXETIC BEAMS AS RESONANT FREQUENCY BIOSENSORS

The mechanics of beam vibration is of fundamental importance in understanding the shift of resonant frequency of microcantilever and nanocantilever sensors. Unlike the simpler Euler–Bernoulli beam theory, the Timoshenko beam theory takes into consideration rotational inertia and shear deformation. For the case of microcantilevers and nanocantilevers, the minute size, and hence low mass, means that the topmost deviation from the Euler–Bernoulli beam theory to be expected is shear deformation. This paper considers the extent of shear deformation for varying Poisson's ratio of the beam material, with special emphasis on solids with negative Poisson's ratio, which are also known as auxetic materials. Here, it is shown that the Timoshenko beam theory approaches the Euler–Bernoulli beam theory if the beams are of solid cross-sections and the beam material possess high auxeticity. However, the Timoshenko beam theory is significantly different from the Euler–Bernoulli beam theory for beams in the form of thin-walled tubes regardless of the beam material's Poisson's ratio. It is herein proposed that calculations on beam vibration can be greatly simplified for highly auxetic beams with solid cross-sections due to the small shear correction term in the Timoshenko beam deflection equation.

Deformation mechanisms leading to auxetic behaviour in the α-cristobalite and α-quartz structures of both silica and germania

Analytical expressions have been developed in which the elastic behaviour of the α-quartz and α-cristobalite molecular tetrahedral frameworks of both silica and germania are modelled by rotation, or dilation or concurrent rotation and dilation of the tetrahedra. Rotation and dilation of the tetrahedra both produce negative Poisson's ratios (auxetic behaviour), whereas both positive and negative values are possible when these mechanisms act concurrently. Concurrent rotation and dilation of the tetrahedra reproduces with remarkable accuracy both the positive and negative ν(31) Poisson's ratios observed for silica α-quartz and α-cristobalite, respectively, when loaded in the x(3) direction. A parametric fit of the concurrent model to the germania α-quartz experimental ν(31) Poisson's ratio is used to predict ν(31) for germania α-cristobalite, for which no experimental value exists. This is predicted to be +0.007. Strain-dependent ν(31) trends, due to concurrent rotation and dilation in the silica structures, are in broad agreement with those predicted from pair-potential calculations, although significant differences do occur in the absolute values. With the model of concurrent dilation and rotation of the tetrahedra we predict that an alternative uniaxial stress (σ(3))-induced phase exists for both silica, α-quartz and α-cristobalite, and germania, α-cristobalite, having geometries in reasonable agreement with β-quartz and idealized β-cristobalite, respectively.