Investigations of the influence of liposome composition on vesicle stability and drug transfer in human plasma: a transfer study

Surface-modified cationic liposomes with a matrix metalloproteinase-degradable polyethylene glycol derivative improved doxorubicin delivery in murine colon cancer

PEGylation is a commonly used approach to prolong the blood circulation time of cationic liposomes. However, PEGylation is associated with the "PEG dilemma", which hinders binding and uptake into tumor cells. The cleavable PEG products are a possible solution to this problem. In the current research, doxorubicin-loaded cationic liposomes (Dox-CLs) surface-conjugated with a matrix metalloproteinase-2 (MMP-2)-sensitive octapeptide linker-PEG derivative were prepared and compared to non-PEGylated and PEGylated CLs in terms of size, surface charge, drug encapsulation and release, uptake, in vivo pharmacokinetics, and anticancer efficacy. It was postulated that PEG deshielding in response to the overexpressed MMP-2 in the tumor microenvironment increases the interaction of protected CLs with cellular membranes and improves their uptake by tumor cells/vasculature. MMP2-responsive Dox-CLs had particle sizes of ∼115-140 nm, surface charges of ∼+25 mV, and encapsulation efficiencies of ∼85-95%. In vitro cytotoxicity assessments showed significantly enhanced uptake and cytotoxicity of PEG-cleavable CLs compared to their non-cleavable PEG-coated counterparts or Caelyx®. Also, the chick chorioallantoic membrane assay showed great antiangiogenesis ability of Dox-CLs leading to target and prevent tumor neovascularization. Besides, in vivo studies showed an effective therapeutic efficacy of PEG-cleavable Dox-CLs in murine colorectal cancer with negligible hematological and histopathological toxicity. Altogether, our results showed that MMP2-responsive Dox-CLs could be served as a promising approach to improve tumor drug delivery and uptake.

Drastic differences between the release kinetics of two highly related porphyrins in liposomal membranes: mTHPP and pTHPP

HYPOTHESIS

The release of hydrophobic compounds from liposomal membranes occurs by partitioning and is thus determined by the physicochemical properties (e.g. logP and water solubility) of the drug. We postulate that even minor structural differences, e.g. the position of the phenolic OH-group of the hydrophobic porphyrins mTHPP and pTHPP (meta vs. para substitution), distinctly affect their partitioning and release behavior from liposomes.

EXPERIMENTS

The release and redistribution of mTHPP and pTHPP from lecithin or POPC/POPG liposomes to different acceptor particles (DSPE-mPEG micelles and liposomes) was studied by asymmetrical flow field-flow fractionation to separate donor and acceptor particles. Reversed phase HPLC was applied to detect differences in partitioning. Molecular dynamics (MD) simulations were carried out to obtain molecular insight in the different behavior of the two compounds inside a lipid bilayer.

FINDINGS

Despite the minor differences in chemical structure, mTHPP is more hydrophobic and redistributes much slower to both acceptor phases than pTHPP. MD simulations indicate that compared to pTHPP, mTHPP makes stronger hydrogen bonds with the lipid head groups, is oriented more parallel to the lipid tails and is embedded slightly deeper in the membrane.

Cyclodextrin-Coordinated Liposome-in-Gel for Transcutaneous Quercetin Delivery for Psoriasis Treatment

Psoriasis is a chronic inflammatory skin disease that is difficult to treat. Quercetin (QT) is a dietary flavonoid known for its anti-inflammatory effects and safe use in humans. However, the topical application of quercetin for psoriasis treatment presents a significant challenge due to its poor water solubility and low stability in semisolid preparations, where it tends to recrystallize. This work presents a novel liposome-in-gel formulation for the quercetin-based topical treatment of psoriasis. The quercetin-loading liposomes are stabilized by hydroxypropyl-β-cyclodextrin (HPCD), which interacts with phospholipids via hydrogen bonding to form a layer of an HPCD coating on the liposome interface, thus resulting in improved stability. Various analytical techniques, such as FTIR spectroscopy, Raman spectroscopy, and TEM, were used to characterize the molecular coordination patterns between cyclodextrin and liposomes. The results demonstrated that HPCD assisted the liposomes in interfacing with the matrix lipids and keratins of the stratum corneum, thereby enhancing skin permeability and promoting drug penetration and retention in the skin. The in vivo results showed that the topical QT HPCD-liposome-in-gel improved the treatment efficacy of psoriatic plaque compared to free QT. It alleviated the symptoms of skin thickening and downregulated proinflammatory cytokines, including TNF-α, IL-17A, and IL-1β. The results suggested that the HPCD-coordinated liposome-in-gel system could be a stable carrier for topical QT therapy with good potential in psoriasis treatment.

Biological and thermodynamic stabilization of lipid-based delivery systems through natural biopolymers; controlled release and molecular dynamics simulations

Nowadays, the use of lipid-based nanocarriers for the targeted and controlled delivery of a variety of hydrophobic and hydrophilic bioactive-compounds and drugs has increased significantly. However, challenges such as thermodynamic instability, oxidation, and degradation of lipid membranes, as well as the unintended release of loaded compounds, have limited the use of these systems in the food and pharmaceutical industries. Therefore, the present study reviews the latest achievements in evaluating the characteristics, production methods, challenges, functional, and biological stabilization strategies of lipid-based carriers (including changes in formulation composition, structural modification, membrane-rigidity, and finally monolayer or multilayer coating with biopolymers) in different conditions, as well as molecular dynamics simulations. The scientists' findings indicate the effect of natural biopolymers (such as chitosan, calcium alginate, pectin, dextran, xanthan, caseins, gelatin, whey-proteins, zein, and etc.) in modifying the external structure of lipid-based carriers, improving thermodynamic stability and resistance of membranes to physicochemical and mechanical tensions. However, depending on the type of bioactive compound as well as the design and production goals of the delivery-system, selecting the appropriate biopolymer has a significant impact on the stability of vesicles and maintaining the bioaccessibility of the loaded-compounds due to the stresses caused by the storage-conditions, formulation, processing and gastrointestinal tract.

Crosstalk of low density lipoprotein and liposome as a paradigm for targeting of 5-fluorouracil into hepatic cells: cytotoxicity and liver deposition

This study aimed to utilize cholesterol conjugation of 5-fluorouracil (5-FUC) and liposomal formulas to enhance the partitioning of 5-FU into low density lipoprotein (LDL) to target hepatocellular carcinoma (HCC). Thus, 5-FU and 5-FUCwere loaded into liposomes. Later, the direct loading and transfer of 5-FU, and 5-FUC from liposomes into LDL were attained. The preparations were characterized in terms of particle size, zeta potential, morphology, entrapment efficiency, and cytotoxicity using the HepG2 cell line. Moreover, the drug deposition into the LDL and liver tissues was investigated. The present results revealed that liposomal preparations have a nanosize range (155 - 194 nm), negative zeta potential (- 0.82 to - 16 mV), entrapment efficiency of 69% for 5-FU, and 66% for 5-FUC. Moreover, LDL particles have a nanosize range (28-49 nm), negative zeta potential (- 17 to -27 mV), and the entrapment efficiency is 11% for 5-FU and 85% for 5-FUC. Furthermore, 5-FUC loaded liposomes displayed a sustained release profile (57%) at 24 h compared to fast release (92%) of 5-FU loaded liposomes. 5-FUC and liposomal formulas enhanced the transfer of 5-FUC into LDL compared to 5-FU. 5-FUC loaded liposomes and LDL have greater cytotoxicity against HepG2 cell lines compared to 5-FU and 5-FUC solutions. Moreover, the deposition of 5-FUC in LDL (26.87ng/mg) and liver tissues (534 ng/gm tissue) was significantly increased 5-FUC liposomes compared to 5-FU (11.7 ng/g tissue) liposomal formulation. In conclusion, 5-FUC is a promising strategy for hepatic targeting of 5-FU through LDL-mediated gateway.

Transfer Investigations of Lipophilic Drugs from Lipid Nanoemulsions to Lipophilic Acceptors: Contributing Effects of Cholesteryl Esters and Albumin as Acceptor Structures

When studying the release of poorly water-soluble drugs from colloidal drug delivery systems designed for intravenous administration, the release media should preferentially contain lipophilic components that represent the physiological acceptors present in vivo. In this study, the effect of different acceptor structures was investigated by comparing the transfer of fenofibrate, retinyl acetate, and orlistat from trimyristin nanoemulsion droplets into lipid-containing hydrogel particles, as well as to bovine serum albumin (BSA). A nanodispersion based on trimyristin and cholesteryl nonanoate was incorporated into the hydrogel particles (mean diameter ~40 µm) in order to mimic the composition of lipoproteins. The course of transfer observed utilizing the lipid-containing hydrogel particles as an acceptor was in relation to the lipophilicity of the drugs: the higher the logP value, the slower the transfer. There was no detectable amount of the drugs transferred to BSA in liquid solution, demonstrating clearly that albumin alone does not contribute substantially as acceptor for the lipophilic drugs under investigation in this study. In contrast, cholesteryl nonanoate contributes to a much greater extent. However, in all cases, the partition equilibrium of the drugs under investigation was in favor of the trimyristin emulsion droplets.

Asymmetric flow field-flow fractionation as a multifunctional technique for the characterization of polymeric nanocarriers

The importance of polymeric nanocarriers in the field of drug delivery is ever-increasing, and the accurate characterization of their properties is paramount to understand and predict their behavior. Asymmetric flow field-flow fractionation (AF4) is a fractionation technique that has gained considerable attention for its gentle separation conditions, broad working range, and versatility. AF4 can be hyphenated to a plurality of concentration and size detectors, thus permitting the analysis of the multifunctionality of nanomaterials. Despite this potential, the practical information that can be retrieved by AF4 and its possible applications are still rather unfamiliar to the pharmaceutical scientist. This review was conceived as a primer that clearly states the "do's and don'ts" about AF4 applied to the characterization of polymeric nanocarriers. Aside from size characterization, AF4 can be beneficial during formulation optimization, for drug loading and drug release determination and for the study of interactions among biomaterials. It will focus mainly on the advances made in the last 5 years, as well as indicating the problematics on the consensus, which have not been reached yet. Methodological recommendations for several case studies will be also included.

Transfer of Lipophilic Drugs from Nanoemulsions into Lipid-Containing Alginate Microspheres

Knowledge about the release behavior and drug retention properties of colloidal carriers is of essential importance for quality control as well as to predict in vivo performance. When conducting release studies from such systems, the release media should preferentially contain lipophilic acceptor components in order to mimic physiological conditions. In this study, transfer from a trimyristin nanoemulsion into lipid-containing hydrogel beads was investigated for fenofibrate, cannabidiol, retinyl acetate, orlistat, and lumefantrine. To generate the acceptor system, a trimyristin nanoemulsion was incorporated into Ca-alginate microspheres (mean diameter ~40 µm) with a spraying method. Using this approach, the advantages of small lipophilic acceptor particles with a large interfacial area were combined with a single separation process from the donor via a filtration step. The method was applicable to distinguish between fast (fenofibrate) and slow drug transfer (lumefantrine) with good time resolution. Lipophilicity, estimated according to the calculated logP value of the respective drug, was a major factor influencing the transfer performance: the higher the logP value, the slower the transfer. This experimental setup is a promising technique to investigate the release of poorly water-soluble drugs from various types of nanocarriers under closer to physiological conditions than with many other methods currently applied.

Piperacillin Encapsulation in Nanoliposomes Using Modified Freeze-Drying of a Monophase Solution Method: Preparation, Characterization and In Vitro Antibacterial Activity

Piperacillin (Pip) is a broad spectrum β-lactam against most Gram-positive and Gram-negative aerobic and anaerobic bacteria. However, bacterial resistance restricts its benefits for the treatment of infectious diseases. Recently, nanoliposomal systems have been investigated as encouraging strategies to address this issue owing to their immense potential. We aimed to encapsulate Pip in liposomal nanoparticles and study their antibacterial activities in vitro against Pseudomonas aeruginosa (P. aeruginosa). Different liposomes were prepared based on the freeze-drying of a monophase solution method. Then, they were characterized in terms of size, zeta potential, polydispersity-index, and morphology. For further analysis, spectra of ATR-FTIR and XRD were taken for liposomal Pip. Encapsulation efficiency (EE) was determined via agar diffusion assay. Also, minimum inhibitory concentrations (MICs) were investigated by the standard broth macro-dilution method. The liposomes were from 100.9 to 444.13 nm with z-potential of - 30.70 to - 10.57 mV. EE of the selected formulation was 53.1%. TEM results showed that the liposomes were nanosized and almost spherical. ATR-FTIR results confirmed the full encapsulation of Pip in nanoliposomes. The X-ray pattern indicated that the liposomal Pip was amorphous. The MIC (10.6 µg/ml) of the nanoliposomal Pip against P. aeruginosa was one-half of the MIC (21.25 µg/ml) of free Pip for the same organisms. Considering four aspects (nanosized liposomes, no need for sterilization, suitable EE and enhanced antibacterial effects), this preparation method seems promising and may be used to overcome the bacterial resistance relative to Pip.

Current state of the nanoscale delivery systems for temoporfin-based photodynamic therapy: Advanced delivery strategies

Enthusiasm for photodynamic therapy (PDT) as a promising technique to eradicate various cancers has increased exponentially in recent decades. The majority of clinically approved photosensitizers are hydrophobic in nature, thus, the effective delivery of photosensitizers at the targeted site is the main hurdle associated with PDT. Temoporfin (mTHPC, medicinal product name: Foscan®), is one of the most potent clinically approved photosensitizers, is not an exception. Successful temoporfin-PDT requires nanoscale delivery systems for selective delivery of photosensitizer. Over the last 25 years, the number of papers on nanoplatforms developed for mTHPC delivery such as conjugates, host-guest inclusion complexes, lipid-and polymer-based nanoparticles and carbon nanotubes is burgeoning. However, none of them appeared to be "ultimate". The present review offers the description of different challenges and achievements in nanoparticle-based mTHPC delivery focusing on the synergetic combination of various nano-platforms to improve temoporfin delivery at all stages of biodistribution. Furthermore, the association of different nanoparticles in one nanoplatform might be considered as an advanced strategy allowing the combination of several treatment modalities.

A CRISPR/Cas9 based polymeric nanoparticles to treat/inhibit microbial infections

The latest breakthrough towards the adequate and decisive methods of gene editing tools provided by CRISPR/Cas9 (Clustered Regularly Interspaced Short Palindromic Repeat/CRISPR Associated System), has been repurposed into a tool for genetically engineering eukaryotic cells and now considered as the major innovation in gene-related disorders. Nanotechnology has provided an alternate way to overcome the conventional problems where methods to deliver therapeutic agents have failed. The use of nanotechnology has the potential to safe-side the CRISPR/Cas9 components delivery by using customized polymeric nanoparticles for safety and efficacy. The pairing of two (CRISPR/Cas9 and nanotechnology) has the potential for opening new avenues in therapeutic use. In this review, we will discuss the most recent advances in developing nanoparticle-based CRISPR/Cas9 gene editing cargo delivery with a focus on several polymeric nanoparticles including fabrication proposals to combat microbial infections.

Evaluation of EGCG Loading Capacity in DMPC Membranes

Catechins are molecules with potential use in different pathologies such as diabetes and cancer, but their pharmaceutical applications are often hindered by their instability in the bloodstream. This issue can be circumvented using liposomes as their nanocarriers for in vivo delivery. In this work, we studied the molecular details of (-)-epigallocatechin-3-gallate (EGCG) interacting with 1,2-dimyristoyl- sn-glycero-3-phosphocholine (DMPC) monolayer/bilayer systems to understand the catechin loading ability and liposome stability, using experimental and computational techniques. The molecular dynamics simulations show the EGCG molecules deep inside the lipid bilayer, positioned below the lipid ester groups, generating a concentration-dependent lipid condensation. This effect was also inferred from the surface pressure isotherms of DMPC monolayers. In the polarization-modulated infrared reflection absorption spectra assays, the predominant effect at higher concentrations of EGCG (e.g., 20 mol %) was an increase in lipid tail disorder. The steady-state fluorescence data confirmed this disordered state, indicating that the catechin-induced liposome aggregation outweighs the condensation effects. Therefore, by adding more than 10 mol % EGCG to the liposomes, a destabilization of the vesicles occurs with the ensuing release of entrapped catechins. The loading capacity for DMPC seems to be limited by its disordered lipid arrangements, typical of a fluid phase. To further increase the clinical usefulness of liposomes, lipid bilayers with more stable and organized assemblies should be employed to avoid aggregation at large concentrations of catechin.

Copper complex nanoformulations featuring highly promising therapeutic potential in murine melanoma models

Aim: Preclinical evaluation of a cytotoxic copper (II) complex formulated in long circulating nanoliposomes for melanoma treatment. Materials & methods: Liposomal nanoformulations of the copper complex were characterized in terms of thermodynamic behavior (differential scanning calorimeter), pH-sensitivity (spectrophotometry) and antiproliferative effects against murine melanoma B16F10 cells in vitro. Preclinical studies were performed in a C57BL/6 syngeneic melanoma model. Results: Nanoformulations were thermodynamically stable, and CHEMS-containing nanoliposomes were pH-sensitive and preserved the antiproliferative properties of the copper compound. These nanoformulations significantly impaired tumor progression in vivo, devoid of toxic side effects, compared with control mice or mice treated with the free metallodrug. Conclusion: Copper complex-containing nanoliposomes demonstrate high anticancer efficacy and safety, constituting a step forward to the development of more effective therapeutic strategies against melanoma.

New findings on the incorporation of essential oil components into liposomes composed of lipoid S100 and cholesterol

The encapsulation of essential oil components into liposomes was demonstrated to improve their solubility and chemical stability. In this study, we investigated the effect of chemical structure, Henry's law constant (H_c), and aqueous solubility of essential oil components on their liposomal encapsulation. Estragole, eucalyptol, isoeugenol, pulegone, terpineol, and thymol were encapsulated in lipoid S100-liposomes using the ethanol injection method. The H_c values were determined. The incorporation in liposomes was more efficient (encapsulation efficiency > 90%) for the essential oil components exhibiting low aqueous solubility (estragole, isoeugenol, and pulegone). Moreover, efficient entrapment into vesicles (loading rate > 18%) was obtained for isoeugenol, terpineol, and thymol. This result suggests that the presence of a hydroxyl group in the structure and a low Hc value enhance the entrapment of essential oil components into liposomes. Furthermore, drug release rate from liposomes was controlled by the loading rate of essential oil components into liposomes, the size of particles, the location of essential oil components within the lipid bilayer, and the cholesterol incorporation rate of liposomes. Finally, considerable concentrations of isoeugenol, pulegone, terpineol, and thymol were retained in liposomes after 10 months with respect to the initial concentration.

Multivesicular liposomes for sustained release of bevacizumab in treating laser-induced choroidal neovascularization

Bevacizumab is an anti-vascular endothelial growth factor drug that can be used to treat choroidal neovascularization (CNV). Bevacizumab-loaded multivesicular liposomes (Bev-MVLs) have been designed and developed to increase the intravitreal retention time of bevacizumab and reduce the number of injection times. In this study, Bev-MVLs with high encapsulation efficiency were prepared by double emulsification technique, and antibody activity was determined. The results revealed that 10% of human serum albumin (HSA) could preserve the activity of bevacizumab. In vitro release of Bev-MVLs appeared to be in a more sustained manner, the underlying mechanisms of Bev-MVLs indicated that bevacizumab was released from MVLs through diffusion and erosion. Results of sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) demonstrated that bevacizumab could retain its structural integrity after being released from MVLs in vitro. In vivo imaging was used to evaluate the retention time of antibody in rat eyes, while pharmacokinetic analysis was performed on rabbit eyes. These results indicated that Bev-MVLs exhibited sustained release effects as compared to bevacizumab solution (Bev-S). Bev-MVLs could effectively inhibit the thickness of CNV lesion as compared to Bev-S at 28 days after treatment. Furthermore, these data suggest that Bev-MVLs are biologically feasible to increase the retention time of bevacizumab in vitreous humor. This novel Bev-MVLs may therefore serve as a promising sustained release drug delivery system for the treatment of CNV.

Hydrogen Bonding Regulates the Rigidity of Liposome-Encapsulated Chlorin Photosensitizers

Liposomal formulations facilitate the administration of hydrophobic drugs, avoiding precipitation and aggregation phenomena when injected in polar solvents. The integration of the photosensitizer into the liposome may alter the fluidity of the system and, thus, modify the delivery process of the drug. Such a change has been observed for the liposomal formulation of Temoporfin, which is one of the most potent chlorin photosensitizers employed in photodynamic therapy. Here, all-atom molecular dynamics simulations have been performed to identify the nature of the intermolecular interactions that might be responsible of the different lipids freedom of motion when the drug is introduced in the bilayer. It is found that Temoporfin participates as a hydrogen donor in strong hydrogen-bonding interactions with the polar groups of the phospholipids. The theoretical analysis suggests that the rigidity of drug/liposome complexes can be modulated by considering the different hydrogen-bond ability of the photosensitizer and the carrier material.