Novel bioflocculant produced by salt-tolerant, alkaliphilic strain Oceanobacillus polygoni HG6 and its application in tannery wastewater treatment

Synthesis of chitosan-based flocculant by dielectric barrier discharge modification and its flocculation performance in wastewater treatment

As a typical type of organic flocculant, chitosan is limited by its poor water solubility and narrow pH range application. Grafting modification can improve chitosan's solubility and availability through linking macromolecular chains with other types of water-soluble groups or functional side groups. In this study, dielectric barrier discharge (DBD) was used to active the surface of chitosan, then activated chitosan was polymerized with acrylamide to synthesize a chitosan-based flocculant, chitosan-acrylamide (CS-AM). During the synthesis of CS-AM, the optimal conditions were determined as follows: discharge time of 5 min, discharge power of 60 W, total monomer mass concentration of 80 g L-1, polymerization time of 3 h, polymerization temperature of 70 °C, and m(CS) : m(AM) ratio of 1 : 3. The structure and morphological characteristics of CS-AM were investigated and analyzed by Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), thermogravimetric (TG) analysis, scanning electron microscopy (SEM), X-ray diffraction (XRD) and N2 physical adsorption, respectively. The removal efficiency of kaolin suspension and CNTs suspension can reach up to 95.9% and 90.2% after flocculation of CS-AM. Furthermore, the zeta potential of the supernatant from the CS-AM treated kaolin suspension at different pH values was examined, and the flocculation mechanism of CS-AM was analyzed. This study provides new ideas for the preparation and development of modified chitosan and broadens its application in water treatment.

Dielectric barrier discharge plasma-modified chitosan flocculant and its flocculation performance

The flocculation performance of chitosan can be enhanced by grafting modification to overcome its disadvantages of poor water solubility. In this study, chitosan was modified by dielectric barrier discharge plasma and polymerized with acrylamide and aluminum chloride to synthesize a new chitosan-based flocculant, namely, chitosan-acrylamide-aluminum chloride (CA-PAC). After optimizing the synthesis conditions of CA-PAC, the best conditions were as follows: discharge time of 3 min, discharge power of 50 W, polymerization temperature of 60 °C, polymerization time of 3 h, total monomer concentration of 100 g/L, and m(AlCl3):m(CA) ratio of 2:1. Characterization was performed through SEM, XPS, FTIR, XRD, TG and 1H NMR. Results showed that the preparation of CA-PAC was successful. The influences of flocculant dosage, pH, and stirring intensity on flocculation efficiency were investigated. The removal efficiency of turbidity was 94.1 %. The investigation of the flocculation mechanism revealed that CA-PAC mainly relied on charge neutralization or the synergic action of electric neutralization, bridging, and roll-sweep under acidic and neutral conditions, but it depended on the joint action of adsorption bridging and net sweeping under alkaline conditions. This study provides new ideas for the preparation and development of modified chitosan and broadens its application in water treatment.

Recent advances and perspectives in efforts to reduce the production and application cost of microbial flocculants

Microbial flocculants are macromolecular substances produced by microorganisms. Due to its non-toxic, harmless, and biodegradable advantages, microbial flocculants have been widely used in various industrial fields, such as wastewater treatment, microalgae harvest, activated sludge dewatering, heavy metal ion adsorption, and nanoparticle synthesis, especially in the post-treatment process of fermentation with high safety requirement. However, compared with the traditional inorganic flocculants and organic polymeric flocculants, the high production cost is the main bottleneck that restricts the large-scale production and application of microbial flocculants. To reduce the production cost of microbial flocculant, a series of efforts have been carried out and some exciting research progresses have been achieved. This paper summarized the research advances in the last decade, including the screening of high-yield strains and the construction of genetically engineered strains, search of cheap alternative medium, the extraction and preservation methods, microbial flocculants production as an incidental product of other biological processes, combined use of traditional flocculant and microbial flocculant, and the production of microbial flocculant promoted by inducer. Moreover, this paper prospects the future research directions to further reduce the production cost of microbial flocculants, thereby promoting the industrial production and large-scale application of microbial flocculants.

Bioprospecting of Novel Extremozymes From Prokaryotes-The Advent of Culture-Independent Methods

Extremophiles are remarkable organisms that thrive in the harshest environments on Earth, such as hydrothermal vents, hypersaline lakes and pools, alkaline soda lakes, deserts, cold oceans, and volcanic areas. These organisms have developed several strategies to overcome environmental stress and nutrient limitations. Thus, they are among the best model organisms to study adaptive mechanisms that lead to stress tolerance. Genetic and structural information derived from extremophiles and extremozymes can be used for bioengineering other nontolerant enzymes. Furthermore, extremophiles can be a valuable resource for novel biotechnological and biomedical products due to their biosynthetic properties. However, understanding life under extreme conditions is challenging due to the difficulties of in vitro cultivation and observation since > 99% of organisms cannot be cultivated. Consequently, only a minor percentage of the potential extremophiles on Earth have been discovered and characterized. Herein, we present a review of culture-independent methods, sequence-based metagenomics (SBM), and single amplified genomes (SAGs) for studying enzymes from extremophiles, with a focus on prokaryotic (archaea and bacteria) microorganisms. Additionally, we provide a comprehensive list of extremozymes discovered via metagenomics and SAGs.

Recent Achievements in Polymer Bio-Based Flocculants for Water Treatment

Polymer flocculants are used to promote solid-liquid separation processes in potable water and wastewater treatment. Recently, bio-based flocculants have received a lot of attention due to their superior advantages over conventional synthetic polymers or inorganic agents. Among natural polymers, polysaccharides show many benefits such as biodegradability, non-toxicity, ability to undergo different chemical modifications, and wide accessibility from renewable sources. The following article provides an overview of bio-based flocculants and their potential application in water treatment, which may be an indication to look for safer alternatives compared to synthetic polymers. Based on the recent literature, a new approach in searching for biopolymer flocculants sources, flocculation mechanisms, test methods, and factors affecting this process are presented. Particular attention is paid to flocculants based on starch, cellulose, chitosan, and their derivatives because they are low-cost and ecological materials, accepted in industrial practice. New trends in water treatment technology, including biosynthetic polymers, nanobioflocculants, and stimulant-responsive flocculants are also considered.

Unravelling the characteristics of a heteropolysaccharide-protein from an Haloarchaeal strain with flocculation effectiveness in heavy metals and dyes removal

The production, characterization and potential application in heavy metals and dyes removal of a novel heteropolysaccharide-protein named, gpHb, produced by an Haloarchaeal strain Halogeometricum borinquense strain A52 were investigated. The highest gpHb yield of 13.96 ± 0.32 g/L was produced under optimized conditions by response surface methodology. We focused on the characteristics and flocculation performance of gpHb. An important attribute of protein with 16 protein types identified that occupied a total content of 50.2% in the gpHb. Additionally, carbohydrate that occupied 30.4% of the total bioflocculant content consisted of three monosaccharides. Fourier transform-infrared spectroscopy indicated the presence of carboxyl, hydroxyl, amine, amide, and sulphate groups. To further study flocculation activities, factors such as bioflocculant dosage, temperature, pH, salinity and cations addition were tested. In comparison to the chemical flocculant polyaluminium chloride, gpHb maintain high activity at large range of salinity and its flocculation activity was higher on both sides of pH 7. Addition of trivalent cation mainly Fe³⁺ enhances the flocculating rate indicating that the bioflocculant is negatively charged. Its practical applicability was established for heavy metals and dyes removal from saline aqueous solutions. The highest removal efficiency was observed with Cr³⁺ (91.4%) and Ni²⁺ (89.60%) and with basic blue 3 (83.8%) and basic red (78.6%). The excellent flocculation activity of gpHb under saline condition suggests its potential industrial utility for treatment of textile and tannery wastewaters.

Evaluation of Fresh Water Actinomycete Bioflocculant and Its Biotechnological Applications in Wastewaters Treatment and Removal of Heavy Metals

This study evaluated the potential of a biopolymeric flocculant produced by Terrabacter sp. isolated from Sterkfontein Dam, South Africa. Microbial flocculants aid the aggregation of suspended solutes in solutions, thus, suggesting its alternative application to inorganic and synthetic organic flocculants, which are associated with health-related problems. The 16S rDNA analysis revealed the bacteria to have 98% similarity to Terrabacter sp. MUSC78T and the sequence was deposited in the Genbank as Terrabacter sp. with accession number KF682157.1. A series of experimental parameters such as bioflocculant dosage, cations concentrations, pH, and application of the purified bioflocculant in wastewaters treatment were investigated. In the presence of glucose as a sole carbon source, Ca²⁺ as cation at pH 8, the optimal flocculating activity attained was 85%. Optimum bioflocculant dosage of 0.5 mg/mL was able to remove chemical oxygen demand (COD), biological oxygen demand (BOD), suspended solids (SS), nitrate, and turbidity in dairy wastewater. In addition, the tested bioflocculant exhibited higher flocculating efficiency as compared to polyaluminum chloride, polyethylenime, and alum. Inductible coupled plasma optical emission spectroscopy (ICP-OES) analyses confirmed significant removal of 77.7% Fe, 74.8% Al, 61.9% Mn, and 57.6% Zn as representatives of heavy metals from treated dairy wastewater. Fourier transform infrared spectroscopy (FTIR) indicated the presence of carboxyl, hydroxyl, and amino groups in the purified bioflocculant which could be responsible for flocculation. Findings from this study showed the prospect of the studied bioflocculant as an alternative candidate in wastewater treatment and remediating of heavy metals.

Production of a bioflocculant from Klebsiella sp. OS-1 using brewery wastewater as a source

This study evaluated the potential of bioflocculant production from a Klebsiella strain using brewery wastewater as nutrients. The bioflocculant named OS-1B produced by Klebsiella sp. OS-1 exhibited a good flocculating activity to kaolin clay suspension (around 95%), when the diluted brewery wastewater with 7.2 mg/L total nitrogen and 1013 mg/L COD_Cr was used as a nitrogen source. Glucose (15 g/L) is the most favorable carbon source for Klebsiella sp. OS-1 in bioflocculant production from brewery wastewater. The yielded bioflocculant is pH tolerant and thermally stable, suggesting its good industrial potential. OS-1B mainly comprises polysaccharide (69.4%) and protein (24.5%). Fourier-transform infrared spectra indicate the presence of hydroxyl, carboxyl, esters and amino groups in the bioflocculant molecules. Combined with the results of zeta potential measurements, bridging is suggested as the main flocculation mechanism for OS-1B flocculation with kaolin. Overall, brewery wastewater can be used as a substrate to produce bioflocculants.

Bioflocculants' production from a cellulase-free xylanase-producing Pseudomonas boreopolis G22 by degrading biomass and its application in cost-effective harvest of microalgae

The major problem for industrial application of bioflocculants is its high production cost. Here, a novel bacterium Pseudomonas boreopolis G22, which can secret a cellulase-free xylanase and simultaneously produce bioflocculants (MBF-G22) through directly converting untreated biomass, was isolated. The bioflocculants' production of G22 was closely related to its xylanase activity, hydrolysis ability of biomass and the hemicellulose loss caused by G22. The optimal fermentation conditions with the highest bioflocculants' yield (3.75 mg g^-1 dry biomass) were obtained at the fermentation time of 96 h, incubation temperature of 30 °C, inoculum concentration of 1.0% and biomass concentration of 1.0% in an initial pH value of 7.0. MBF-G22 mainly consisted of polysaccharides (63.3%) with a molecular weight of 3.982 × 10⁶ Da and showed the highest flocculating efficiency of 97.1% at a dosage of 3.5 mg L^-1. In addition, MBF-G22 showed high flocculating efficiency of microalgae (95.7%) at a dosage of 80 mg L^-1.

Recent advances in polysaccharide bio-based flocculants

Natural polysaccharides, derived from biomass feedstocks, marine resources, and microorganisms, have been attracting considerable attention as benign and environmentally friendly substitutes for synthetic polymeric products. Besides many other applications, these biopolymers are rapidly emerging as viable alternatives to harmful synthetic flocculating agents for the removal of contaminants from water and wastewater. In recent years, a great deal of effort has been devoted to improve the production and performance of polysaccharide bio-based flocculants. In this review, current trends in preparation and chemical modification of polysaccharide bio-based flocculants and their flocculation performance are discussed. Aspects including mechanisms of flocculation, biosynthesis, classification, purification and characterization, chemical modification, the effect of physicochemical factors on flocculating activity, and recent applications of polysaccharide bio-based flocculants are summarized and presented.