Neutron reflectivity study of the swollen structure of polyzwitterion and polyeletrolyte brushes in aqueous solution

Effects of Carbon Spacer Length on Conformational Transitions and Protein Adsorption of Polyzwitterions

The properties of polyzwitterions are closely linked to their carbon spacer length (CSL) between oppositely charged groups. A thorough understanding of the effect of CSL on the properties of polyzwitterion-functionalized membranes is important for their fouling resistance and separation performances. In this work, polyzwitterion-functionalized membranes with different CSLs are prepared by coupling selective swelling-induced pore generation with zwitterionization, and the investigation is focused on comprehending the molecular mechanisms underlying protein resistance and conformational transitions within polyzwitterions under varying CSLs. The zwitterionized films show an enhancement in the surface negative potential with the increase of CSL, attributed to the negatively charged groups distanced from the positively charged groups. Quartz crystal microbalance with dissipation (QCM-D) demonstrates that zwitterionized films with different CSLs display distinct levels of resistance to protein adsorption. The trimethylamine N-oxide-derived polymer (PTMAO, CSL = 0) zwitterionized film shows the highest resistance compared to the poly(3-[dimethyl(2'-methacryloyloxyethyl] ammonio) ethanesulfonate (PMAES, CSL = 2) zwitterionized film and the poly(sulfobetaine methacrylate) (PSBMA, CSL = 3) zwitterionized film, owing to its electrical neutrality and pronounced hydrophilicity. Moreover, analysis of the anti-polyelectrolyte behaviors reveals that PTMAO does not undergo a significant conformation transition in deionized water and salt solutions, while the conformations of PMAES and PSBMA display to be more salt-dependent as the CSL increases, attributed to their increased polarization and dipole moment. As a result, the permeability of zwitterionized membranes exhibits enhanced salt responsiveness with the increase in CSL. The findings of this study are expected to facilitate the design of adsorption-resistant surfaces desired in diverse fields.

Correlation between viscoelastic response and frictional properties of hydrated zwitterionic polymer brush film in narrowing shear gap

HYPOTHESIS

A hydrated 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer brush exhibits exceptional lubricity. This lubrication mechanism has traditionally been attributed to either the inherent fluidity of the brush or the water film that forms owing to its hydrophilic nature. Given previous findings that the frictional properties of the MPC polymer brush film show load dependence, we hypothesize that the lubrication mechanism can be elucidated by examining the shear gap (varies owing to the load) dependence of the brush's viscoelastic response.

EXPERIMENTS

MPC polymer brush films with different thicknesses were prepared. Their viscoelastic responses were evaluated across different shear gap widths, and the frictional properties were subsequently compared across states with distinct viscoelastic behaviors.

FINDINGS

The observed shear viscoelasticity demonstrated a clear gap dependence that correlated with frictional attributes. Our data suggests that the lubrication mechanism shifts based on the shear gap. Specifically, two states exhibited low coefficients of friction: one where the osmotic pressure supports the load while allowing flexible deformation of the brush film, and the other where the brush film undergoes compression and transitions to a fully elastic state.

Zwitterionic Polymer-Decorated Lipid Nanoparticles for mRNA Delivery in Mammalian Cells

Lipid nanoparticles (LNPs) play a key role in the effective transport of mRNA into cells for protein translation. Despite the stealthiness of poly(ethylene glycol) (PEG) that helps protect LNPs from protein absorption and blood clearance, the generation of anti-PEG antibodies resulting in PEG allergies remains a challenge for the development of an mRNA vaccine. Herein, a non-PEG lipid was developed by conjugating 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE) with an antifouling zwitterionic polymer, poly(2-methyacryloyloxyethyl phosphorylcholine) (PMPC), of different chain lengths. The PMPC-LNPs formulated from DPPE-PMPC were spherical (diameter ≈ 144-255 nm), neutral in charge, and stable at 4 °C for up to 28 days. Their fraction of stealthiness being close to 1 emphasized the antifouling characteristics of PMPC decorated on LNPs. The PMPC-LNPs were nontoxic to HEK293T cells, did not induce inflammatory responses in THP-1 cells, and exhibited an mRNA transfection efficiency superior to that of PEG-LNPs. This work demonstrated the potential of the developed zwitterionic polymer-conjugated LNPs as promising mRNA carriers.

Underscreening in concentrated electrolytes: re-entrant swelling in polyelectrolyte brushes

Hypersaline environments are ubiquitous in nature and are found in myriad technological processes. Recent empirical studies have revealed a significant discrepancy between predicted and observed screening lengths at high salt concentrations, a phenomenon referred to as underscreening. Herein we investigate underscreening using a cationic polyelectrolyte brush as an exemplar. Poly(2-(methacryloyloxy)ethyl)trimethylammonium (PMETAC) brushes were synthesised and their internal structural changes and swelling response was monitored with neutron reflectometry and spectroscopic ellipsometry. Both techniques revealed a monotonic brush collapse as the concentration of symmetric monovalent electrolyte increased. However, a non-monotonic change in brush thickness was observed in all multivalent electrolytes at higher concentrations, known as re-entrant swelling; indicative of underscreening. For all electrolytes, numerical self-consistent field theory predictions align with experimental studies in the low-to-moderate salt concentration regions. Analysis suggests that the classical theory of electrolytes is insufficient to describe the screening lengths observed at high salt concentrations and that the re-entrant polyelectrolyte brush swelling seen herein is consistent with the so-called regular underscreening phenomenon.

Chemically revised conducting polymers with inflammation resistance for intimate bioelectronic electrocoupling

Conducting polymers offer attractive mixed ionic-electronic conductivity, tunable interfacial barrier with metal, tissue matchable softness, and versatile chemical functionalization, making them robust to bridge the gap between brain tissue and electronic circuits. This review focuses on chemically revised conducting polymers, combined with their superior and controllable electrochemical performance, to fabricate long-term bioelectronic implants, addressing chronic immune responses, weak neuron attraction, and long-term electrocommunication instability challenges. Moreover, the promising progress of zwitterionic conducting polymers in bioelectronic implants (≥4 weeks stable implantation) is highlighted, followed by a comment on their current evolution toward selective neural coupling and reimplantable function. Finally, a critical forward look at the future of zwitterionic conducting polymers for in vivo bioelectronic devices is provided.

Advances in design of polymer brush functionalized inorganic nanomaterials and their applications in biomedical arena

Grafting of polymer brush (assembly of polymer chains tethered to the substrate by one end) is emerging as one of the most viable approach to alter the surface of inorganic nanomaterials. Inorganic nanomaterials despite their intrinsic functional superiority, their applications remain restricted due to their incompatibility with organic or biological moieties vis-à-vis agglomeration issues. To overcome such a shortcoming, polymer brush modified surfaces of inorganic nanomaterials have lately proved to be of immense potential. For example, polymer brush-modified inorganic nanomaterials can act as efficient substrates/platforms in biomedical applications, ranging from drug-delivery to protein-array due to their integrated advantages such as amphiphilicity, stimuli responsiveness, enhanced biocompatibility, and so on. In this review, the current state of the art related to polymer brush-modified inorganic nanomaterials focusing, not only, on their synthetic strategies and applications in biomedical field but also the architectural influence of polymer brushes on the responsiveness properties of modified nanomaterials have comprehensively been discussed and its associated future perspective is also presented. This article is categorized under: Diagnostic Tools > In Vivo Nanodiagnostics and Imaging Therapeutic Approaches and Drug Discovery > Emerging Technologies Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

Biomimetic materials based on zwitterionic polymers toward human-friendly medical devices

This review summarizes recent research on the design of polymer material systems based on biomimetic concepts and reports on the medical devices that implement these systems. Biomolecules such as proteins, nucleic acids, and phospholipids, present in living organisms, play important roles in biological activities. These molecules are characterized by heterogenic nature with hydrophilicity and hydrophobicity, and a balance of positive and negative charges, which provide unique reaction fields, interfaces, and functionality. Incorporating these molecules into artificial systems is expected to advance material science considerably. This approach to material design is exceptionally practical for medical devices that are in contact with living organisms. Here, it is focused on zwitterionic polymers with intramolecularly balanced charges and introduce examples of their applications in medical devices. Their unique properties make these polymers potential surface modification materials to enhance the performance and safety of conventional medical devices. This review discusses these devices; moreover, new surface technologies have been summarized for developing human-friendly medical devices using zwitterionic polymers in the cardiovascular, cerebrovascular, orthopedic, and ophthalmology fields.

Infrared Spectra and Hydrogen-Bond Configurations of Water Molecules at the Interface of Water-Insoluble Polymers under Humidified Conditions

Elucidating the state of interfacial water, especially the hydrogen-bond configurations, is considered to be key for a better understanding of the functions of polymers that are exhibited in the presence of water. Here, an analysis in this direction is conducted for two water-insoluble biocompatible polymers, poly(2-methoxyethyl acrylate) and cyclic(poly(2-methoxyethyl acrylate)), and a non-biocompatible polymer, poly(n-butyl acrylate), by measuring their IR spectra under humidified conditions and by carrying out theoretical calculations on model complex systems. It is found that the OH stretching bands of water are decomposed into four components, and while the higher-frequency components (with peaks at ∼3610 and ∼3540 cm^-1) behave in parallel with the C═O and C-O-C stretching and CH deformation bands of the polymers, the lower-frequency components (with peaks at ∼3430 and ∼3260 cm^-1) become pronounced to a greater extent with increasing humidity. From the theoretical calculations, it is shown that the OH stretching frequency that is distributed from ∼3650 to ∼3200 cm^-1 is correlated to the hydrogen-bond configurations and is mainly controlled by the electric field that is sensed by the vibrating H atom. By combining these observed and calculated results, the configurations of water at the interface of the polymers are discussed.

Cononsolvency of Poly[2-(methacryloyloxy)ethyl phosphorylcholine] in Ethanol-Water Mixtures: A Neutron Reflectivity Study

Molecular mechanisms underlying the cononsolvency, a re-entrant coil-to-globule-to-coil conformational transition of polymer chains in mixtures of two good solvents, of poly[2-(methacryloyloxy)ethyl phosphorylcholine] (PMPC) in ethanol-water binary mixtures were complementarily investigated. This was accomplished by following a statistical mechanical model for competitive hydrogen bonding combined with the cooperative solvation concept as well as neutron reflectivity (NR) experiments employing contrast variation in the cononsolvents. The experimental re-entrant aggregation of the PMPC chains in ethanol-water mixed solvents, obtained on the basis of turbidity was accurately reproduced by theoretical calculations. The calculation proved the relatively strong cooperativity of ethanol and the preferential interaction of water, while the total coverage of solvents was the lowest at an ethanol volume fraction (f_ethanol) of 0.90. At this level, the cononsolvency was the most significant, and the collapsed PMPC chains were solvated with more water than the bulk mixed solvent. The ethanol-water cononsolvency for the PMPC brushes on a planar silicon wafer was investigated by NR experiments, and the solvent composition involved in the collapsed PMPC brush was addressed according to the contrast variation study with mixed solvents of water, deuterium oxide, ethanol-d₅, and ethanol-d₆. The collapsed PMPC brushes at f_ethanol = 0.90 contained more water than the bulk solvent. The preferential distribution of water in the collapsed PMPC brush was consistent with the simulation results. Therefore, the molecular mechanism for the cononsolvency of PMPC in ethanol-water mixed solvents based on competitive hydrogen bonding coupled with cooperative solvation was experimentally rationalized.

Critical In-Plane Density of Polyelectrolyte Brush for the Ordered Hydrogen-Bonded Structure of Incorporated Water

A polymer electrolyte brush is a reasonable platform to confine water molecules within a nanoscopic area to study their role in the function of interacting media because of their adjustable nanospace and charge by changing the in-plane density and side chains of the brush. Here, we demonstrate how the in-plane spacing of cationic polymer brush chains, poly[2-(methacryloyloxy)ethyltrimethylammonium chloride] (PMTAC), affects the hydrogen bond configuration of incorporated water using soft X-ray emission spectroscopy. At the critical in-plane density σ = 0.30 chains/nm² of PMTAC, tetrahedrally coordinated water molecules started to melt into distorted or broken hydrogen-bonded configurations. Considering the charge on the quaternary ammonium cations, the electric field required to form a tetrahedrally coordinated hydrogen-bonded configuration was estimated as ∼500 kV cm^-1 and is effective up to ∼1 nm from the surface of the polymer chain. These findings are useful for designing specific interface properties and the resultant surface function of polyelectrolyte-based materials.

Hydration State Variation of Polyzwitterion Brushes through Interplay with Ions

Polyzwitterions have emerged as a new class of antifouling materials alternating poly(ethylene glycol). The exemplary biopassivation and lubrication behaviors are often attributed to the particular chemical structure of zwitterions, which involve a large dipole moment of the charged groups and a neutral net charge, while the hydration state and dynamics also associate with these characteristics. Polymer brushes composed of surface-tethered polyzwitterion chains produced by surface-initiated controlled radical polymerization have been developed as thin films which exhibit excellent antifouling and lubrication properties. In past decades, numerous studies have been devoted to examining the structure and dynamics of polyzwitterion brush chains in aqueous solutions. This feature article provides an overview of recent studies exploring the hydration state of polyzwitterion brushes with specular neutron reflectivity, highlights some newly published work on the nonuniform equilibrium structure, ion concentration dependence, ion specificity, and the effects of charge spacer length in the zwitterions, and discusses future perspective in this field.

Molecular Understanding of Ion Effect on Polyzwitterion Conformation in an Aqueous Environment

Polyzwitterions (PZs) are promising materials for the antifouling in reverse osmosis and nanofiltration membrane technology for water treatment. Fundamental understanding of the structure and molecular interactions involving zwitterions is crucial to the optimal design of antifouling in membrane separation. Here we employ the umbrella sampling and molecular dynamics simulations to investigate molecular interactions between sulfobetaine/carboxybetaine zwitterions and different metal ions (Na⁺, K⁺, and Ca²⁺) in an aqueous solution. The simulation results show that these ions can form stable or metastable contact ionic/solvent-shared-ionic pairs with zwitterions. Simulations at different grafting densities of PZ brush arrays reveal complex competitive association mechanisms, which are attributed to nonbonded electrostatic and van der Waals interactions among zwitterions, water molecules, and different metal ions in an aqueous environment. While the high-grafting density of the PZ brush array leads to a strong branch association between different zwitterions in water, this association is decreased at intermediate- and low-grafting densities due to strong zwitterion-water interactions. More importantly, adding ions into water at intermediate- and low-grafting densities further breaks down the zwitterion branch association, resulting in a randomly oriented and dispersed branch configuration with significant swelling of the polymers. The degree of swelling depends on the type of ions, which further changes the surface electrostatic potential of PZ coatings.

Interplays of Interfacial Forces Modulate Structure and Function of Soft and Biological Matters in Aquatic Environments

Water had been considered as a passive matrix that merely fills up the space, supporting the diffusion of solute molecules. In the past several decades, a number of studies have demonstrated that water play vital roles in regulating structural orders of biological systems over several orders of magnitude. Water molecules take versatile structures, many of which are transient. Water molecules act as hydrogen bond donors as well as acceptors and biochemical reactions utilize water molecules as nucleophiles. Needless to say, the same principle holds for the synthetic materials that function under water: the conformation, dynamics and functions of molecules are significantly influenced by the surrounding water. This review sheds light on how the structure and function of soft and biological matter in aquatic environments are modulated by the orchestration of various interfacial forces.

X-ray and Neutron Reflectometry of Thin Films at Liquid Interfaces

In the 1980s, Helmuth Möhwald studied lipid monolayers at the air/water interface to understand the thermodynamically characterized phases at the molecular level. In collaboration with Jens Als-Nielsen, X-ray reflectometry was used and further developed to determine the electron density profile perpendicular to the water surface. Using a slab model, parameters such as thickness and density of the individual molecular regions, as well as the roughness of the individual interfaces, were determined. Later, X-ray and neutron reflectometry helped to understand the coverage and conformation of anchored and adsorbed polymers. Nowadays, they resolve molecular properties in emerging topics such as liquid metals and ionic liquids. Much is still to be learned about buried interfaces (e.g., liquid/liquid interfaces). In this Article, a historical and theoretical background of X-ray reflectivity is given, recent developments of X-ray and neutron reflectometry for polymers at interfaces and thin layers are highlighted, and emerging research topics involving these techniques are emphasized.

Ionic Strength-Dependent Interactions and Dimensions of Adsorbed Zwitterionic Copolymers

We report direct measurements of ionic strength-dependent interactions between different molecular weights of zwitterionic triblock copolymers adsorbed to hydrophobic colloids and surfaces. The zwitterionic copolymers investigated include phosphorylcholine [poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC)] and sulfopropylbetaine [poly(3-( N-2-methacryloyloxyethyl- N, N-dimethyl)ammonatopropanesulfonate) (PMAPS)] end blocks separated by poly(propylene oxide) center blocks. The range of repulsion between adsorbed PMAPS copolymer layers increases with increasing NaCl from 0.01 to 3 M, and layer thicknesses range from ∼50 to 100% of the PMAPS block contour length. In contrast, repulsion between PMPC layers does not change for 0.01-3 M NaCl, and layers remain near full extension at their contour length. NaCl-dependent interactions and inferred layer dimensions correlate with hydrodynamic layer thickness and polymer second virial coefficients. These results suggest that the interaction range and layer thickness of adsorbed zwitterionic copolymers arise from a balance of intramolecular dipolar attraction and repulsion possibly mediated by water solvation. The balance between these competing effects and resulting ionic strength dependence is determined by specific zwitterionic moieties.

Ion-Specific Hydration States of Zwitterionic Poly(sulfobetaine methacrylate) Brushes in Aqueous Solutions

The ion-specific hydration states of zwitterionic poly(3-( N-2-methacryloyloxyethyl- N, N-dimethyl)ammonatopropanesulfonate) (PMAPS) brushes in various aqueous solutions were investigated by neutron reflectivity (NR) and atomic force microscopy (AFM). The asymmetric hydration state of the PMAPS brushes was verified from the NR scattering-length density profiles, while the variation in their swollen thickness was complementary as determined from AFM topographic images. PMAPS brushes got thicker in any salt solutions, while the extent of swelling and the dimensions of swollen chain structure were dependent on the ion species and salt concentration in the solutions. Anion specificity was clearly observed, whereas cations exhibited weaker modulation in ion-specific hydration states. The anion specificity could be ascribed to ion-specific interactions between the quaternary ammonium cation in sulfobetaine and the anions. The weak cation specificity was attributed to the intrinsically weak cohesive interactions between the weakly hydrated sulfonate anion in sulfobetaine and the strongly hydrated cations. The ion-specific hydration of PMAPS brushes was largely consistent with the ion-specific aggregation state of the PMAPS chains in aqueous solutions.

Intermolecular Interaction of Polymer Brushes Containing Phosphorylcholine and Inverse-Phosphorylcholine

Choline phosphate (CP) is a phosphobetaine-type zwitterionic functional group, referred to as inverse phosphorylcholine (PC) due to the reverse orientation of a positively charged quaternary amine and anionic phosphate in contrast to PC lipids in nature. The A unique dipole paring between CP and PC groups has attracted much attention in the biointerface research field. Herein, to evaluate the molecular interaction between the CP and PC groups in water, force-distance curve measurements using scanning probe microscopy (SPM) with a PC-group-functionalized cantilever was carried out on the surface of polymer brushes bearing the CP groups. Three types of methacrylate monomers bearing CP with ethyl (Et), methoxyethyl (MOE), and isopropyl (iPr) phosphates were synthesized in 42-71% yields, and polymerized by surface-initiated atom transfer radical polymerization to form polymer brushes on silicon wafers. The surface free energy of CP-polymer brushes with Et, MOE, and iPr was estimated to be 64.0, 61.4, and 57.4 mN m^-1, respectively, based on contact angle measurements. Force-distance curve measurements of polymer brushes having a CP group was conducted in water at 25 °C by SPM using a spherical probe produced by attaching a silica particle (SiP; d = 25 μm) covered with PC or CP groups to a tipless cantilever. Adhesion force larger than 14 nN was observed between the CP-polymer brushes and PC-SiP, whereas PC-polymer brushes revealed extremely low adhesion force of less than 0.6 nN with PC-SiP and propylsilane-modified SiP. The specific attractive molecular interaction between CP and PC groups was quantitatively evaluated.

Bioinactive semi-interpenetrating network gel layers: zwitterionic polymer chains incorporated in a cross-linked polymer brush

A thin gel layer with thermo-responsive polymer brushes and semi-interpenetrating PCMB exhibited the switching of bio-inert properties depending on temperature.

Response of a Permanently Charged Polyelectrolyte Brush to External Ions: The Aspects of Structure and Dynamics

Structure and dynamics inside permanently charged polyelectrolyte brushes, sodium polystyrene sulfonate brushes, during their response to the introduction of external ions (NaCl) are investigated by neutron reflectivity and dielectric spectroscopy. Neutron reflectivity measurements show that the segmental density of the inner part of the brushes decreases and that of the outer part increases when the salt level is tuned from the salt-free condition to a moderate level (<10^-2 M)-the brushes swell further compared with the salt-free condition. This is attributed to the breakup of the multiplets formed by dipole-dipole pairs, and by this process, the previously constrained chain segments by the multiplets are released. Dielectric spectroscopy discovers a giant dipole by the charge separation of the adsorbed counterions and the PSS^- chains, induced by electric field. The dynamics of the induced giant dipole is accelerated with the increase of external salt, as a result of the charge regularization by elevated salt level. At high-enough salt level, the screening effect reduces the electrostatic repulsion between the neighboring chains and makes the brushes shrink.

The effects of poly(zwitterions)s versus poly(ethylene glycol) surface coatings on the biodistribution of protein nanoparticles

Zwitterionic poly(carboxybetaine) (PCB), poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) and non-ionic poly(ethylene glycol) (PEG), which have similar degrees of polymerization, were grafted to branched polyethyleneimine (PEI) to generate PCB-grafted PEI (PEI-PCB), PMPC-grafted PEI (PEI-PMPC) and PEG-grafted PEI (PEI-PEG) copolymers, respectively. These grafted PEI copolymers with almost the same grafting number were coated on the surface of 110 nm bovine serum albumin-poly(N-3-acrylamidophenylboronic acid) (BSA-PAPBA) nanoparticles to make a comparison of the surface decoration effect on the biodistribution of nanoparticles. Compared to the nanoparticles without surface decoration, surface decoration with the copolymers significantly prolonged the circulation time of BSA-PAPBA nanoparticles, leading to remarkable enhancement of tumor uptake of the nanoparticles. The drug accumulation at the tumor site reached more than 10% injected dose per gram of tumor. Among them, the PEI-PMPC-decorated nanoparticles exhibited the best performance in tumor accumulation and anticancer ability. Thus, these surface-decorated nanoparticles may serve as a strong candidate for high tumor accumulation of drug delivery systems.

Adsorbed Polyzwitterion Copolymer Layers Designed for Protein Repellency and Interfacial Retention

Poly(2-methacryloyloxyethyl phosphorylcholine) (pMPC), when end-tethered to surfaces by the adsorption of copolymeric cationic segments, forms adsorbed layers that substantially reduce protein adsorption. This study examined variations in the molecular architecture of copolymers containing cationic poly(trimethylammonium ethyl methacrylate (pTMAEMA) anchor blocks that adsorbed strongly to negative surfaces. With appropriate copolymer design, the pTMAEMA blocks were shielded, by pMPC tethers, from solution-phase proteins. The most protein-resistant copolymer layers, eliminating fibrinogen and lysozyme adsorption within detectible limits of 0.01 mg/m², had metrics (the amount of pMPC at the surface and the reduced tether footprint) consistent with the formation of an interfacial polymer brush. The p(TMAEMA-b-MPC) copolymer layers substantially outperformed the protein resistance of surface-polymerized pMPC layers when compared on a per-polyzwitterion-mass basis or on the basis of the scaled tether area. Additionally, p(TMAEMA-b-MPC) copolymer layers offered advantages over the much-studied cationically anchored poly(ethylene glycol) (PEG) graft copolymer system, which forms PEG brushes by the adsorption of a poly l-lysine (PLL) backbone. Although the optimized p(TMAEMA-b-MPC) and PLL-PEG copolymers were similarly fibrinogen-resistant, the cationic protein lysozyme was repelled by pMPC but adhered to the PEG brush via PEG-lysozyme attractions. Additionally, the adsorbed p(TMAEMA-b-MPC) copolymers were not displaced by poly l-lysine homopolymers, which completely displaced the PLL-PEG copolymer to expose a protein-adhesive surface. Thus, the p(TMAEMA-b-MPC) copolymer system comprises a scalable means to produce protein-repellent surfaces, free of the complexities of surface-initiated polymerization and with the advantages of polyzwitterions.

Effect of Charged Group Spacer Length on Hydration State in Zwitterionic Poly(sulfobetaine) Brushes

Effect of alkyl chain spacer length between the charged groups (CSL) in zwitterionic poly(sulfobetaine) (PSB) brushes on the hydration state was investigated. PSB brushes with ethyl (PMAES), propyl (PMAPS), or butyl (PMABS) CSL were prepared by surface-initiated atom transfer radical polymerization on silicon wafers. Hydration states of the PSB brushes in aqueous solutions and/or humid vapor were investigated by contact angle measurement, infrared spectroscopy, AFM observation, and neutron reflectivity. The PSB brushes are swollen in humid air and deionized water due to the hydration of the charged groups leading to the reduction of hydrated PSB brushes/water interfacial free energy. The hydrated PSB brushes exhibit clear interface with low interfacial roughness due to networking of the PSB brush chains through association of the SBs. The hydrated PSB brushes produce diffusive swollen layer in the presence of NaCl because of the charge screening followed by SB dissociation by the bound ions. The ionic strength sensitivity in the hydration got more significant with increasing the CSL in SBs because of the augmentation in partial charge by charged group separation.

Antifouling Stripes Prepared from Clickable Zwitterionic Copolymers

In this study, we have fabricated robust patterned surfaces that contain biocompatible and antifouling stripes, which cause microorganisms to consolidate into bare silicon spaces. Copolymers of methacryloyloxyethyl phosphorylcholine (MPC) and a methacrylate-substituted dihydrolipoic acid (DHLA) were spin-coated onto silicon substrates. The MPC units contributed biocompatibility and antifouling properties, and the DHLA units enabled cross-linking and the formation of robust thin films. Photolithography enabled the formation of 200-μm-wide poly(MPC-DHLA) stripped patterns that were characterized using atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and rhodamine 6G staining. Regardless of the spacing between poly(MPC-DHLA) stripes (10, 50, or 100 μm), Escherichia coli rapidly adhered to the bare silicon gaps that lacked the copolymer, confirming the antifouling nature of MPC. Overall, this work provides a surface modification strategy for generating alternating biofouling and nonfouling surface structures that are potentially applicable for researchers studying cell biology, drug screening, and biosensor technology.

Interferometry study of aqueous lubrication on the surface of polyelectrolyte brush

The water lubrication behavior of a polyelectrolyte brush was investigated by using double-spacer-layer ultra-thin-film interferometry to determine the thickness of the aqueous lubrication layer present at the interface between the brush and a spherical glass lens. A hydrophilic poly{[2-(methacryloyloxy)ethyl]trimethylammonium chloride} brush was prepared on an optical glass disk coated with layers of semireflective chromium and silica. The thickness of the hydrodynamic lubrication layer was estimated interferometrically. On increasing the sliding velocity from 10(-5) to 10(-1) m·s(-1), the gap between the rotating disk and loading sphere glass lens showed a marked increase to 130 nm at 2×10(-2) m·s(-1), and the friction coefficient simultaneously decreased to 0.01-0.02, indicating that the polyelectrolyte brush promoted the formation of a fluid lubrication layer that separates the rubbing surfaces, preventing direct contact and providing a low friction coefficient.