Synthesis and characterization of albumin imprinted polymeric hydrogel membranes for proteomic studies

p(HEMA)-RR241 hydrogel membranes with micron network for IgG depletion in proteomic studies

Serum proteins can generally be considered a good source for the illness' indication and are precious resources to detect diseases such as inflammation, cancer, diabetes, malnutrition, cardiovascular diseases, Alzheimer's, other autoimmune diseases, and infections. However, one of the biggest difficulties for proteomic studies is that the majority of serum protein mass consists of only a few proteins. Albumin and Immunoglobulin (IgG) constitute 80% of total serum protein. In this study, dye ligand affinity-based hydrogel membranes were proposed as new materials with micron mesh structures. Micron mesh p(HEMA) hydrogel membranes were synthesized by using the UV-photopolymerization method, then modified with Reactive Red 241 (RR241) dye ligand to increase the affinity towards IgG. Characterizations of synthesized micron mesh p(HEMA)-RR241 hydrogel membranes were also performed. It was demonstrated by the characterization studies that; the dye was successfully incorporated into the membrane structure with the amount of 119.38 mg/g. The hydrophilic property of the hydrogel membrane was demonstrated by swelling tests and the swelling value of dye modified membrane was found to be 8 times higher than that of the plain membrane. Micron network structure, as well as the porosity, were demonstrated with SEM/ESEM studies. Optimization of IgG adsorption conditions was also studied at different parameters (pH, temperature, ion strength, initial IgG concentration). Optimum pH, temperature, and ionic strength were found to be 6.5, 25 °C, 0.05 M, respectively, and the maximum IgG absorption value was 10.27 mg/g. Finally, it was shown that the proposed materials can be used repeatedly by 5 adsorption-desorption cycles.

Molecularly Imprinted Polymers (MIPs) in Sensors for Environmental and Biomedical Applications: A Review

Molecular imprinted polymers are custom made materials with specific recognition sites for a target molecule. Their specificity and the variety of materials and physical shapes in which they can be fabricated make them ideal components for sensing platforms. Despite their excellent properties, MIP-based sensors have rarely left the academic laboratory environment. This work presents a comprehensive review of recent reports in the environmental and biomedical fields, with a focus on electrochemical and optical signaling mechanisms. The discussion aims to identify knowledge gaps that hinder the translation of MIP-based technology from research laboratories to commercialization.

Poly(2-Hydroxyethyl methacrylate-co-N,N-dimethylacrylamide)-Coated Quartz Crystal Microbalance Sensor: Membrane Characterization and Proof of Concept

Application-oriented hydrogel properties can be obtained by modifying the synthesis conditions of the materials. The purpose of this study is to achieve customized properties for sensing applications of hydrogel membranes based on poly(2-hydroxyethyl methacrylate), HEMA and N,N-dimethylacrylamide, DMAa. Copolymer p(HEMA-co-DMAa) hydrogels were prepared by varying the DMAa monomer ratio from 0-100% in 20% increments. Hydrogel membranes were characterized by attenuated infrared spectroscopy. Swelling and sorption were evaluated using cation solutions. Copolymers were also synthesized on the gold surface of quartz crystal microbalances (QCM) as coating membranes. A proof of concept was conducted for approaching the design and development of QCM sensors based on P(DMAa-co-HEMA)-membranes. Results showed that the water and ion adsorption capacity of hydrogel membranes increased with higher DMAa content. Membranes are not selective to a specific location but did show different transport features with each cation. The QCM coated with the selected membrane presented linear relationships between resonance frequency and ions concentration in solution (10-120 ppm). As a consequence, hydrogel membranes obtained are promising for the development of future biosensing devices.

Clinical Proteomics of Biofluids in Haematological Malignancies

Since the emergence of high-throughput proteomic techniques and advances in clinical technologies, there has been a steady rise in the number of cancer-associated diagnostic, prognostic, and predictive biomarkers being identified and translated into clinical use. The characterisation of biofluids has become a core objective for many proteomic researchers in order to detect disease-associated protein biomarkers in a minimally invasive manner. The proteomes of biofluids, including serum, saliva, cerebrospinal fluid, and urine, are highly dynamic with protein abundance fluctuating depending on the physiological and/or pathophysiological context. Improvements in mass-spectrometric technologies have facilitated the in-depth characterisation of biofluid proteomes which are now considered hosts of a wide array of clinically relevant biomarkers. Promising efforts are being made in the field of biomarker diagnostics for haematologic malignancies. Several serum and urine-based biomarkers such as free light chains, β-microglobulin, and lactate dehydrogenase are quantified as part of the clinical assessment of haematological malignancies. However, novel, minimally invasive proteomic markers are required to aid diagnosis and prognosis and to monitor therapeutic response and minimal residual disease. This review focuses on biofluids as a promising source of proteomic biomarkers in haematologic malignancies and a key component of future diagnostic, prognostic, and disease-monitoring applications.

Human serum albumin-imprinted polymers with high capacity and selectivity for abundant protein depletion

Depletion of human serum albumin (HSA), the most abundant protein in human plasma, from serum/plasma is a prerequisite before their proteomic analysis. Molecularly imprinted polymers (MIPs) using HSA as a template have been designed for this purpose, but suffer from a low sorption capacity and low selectivity. Here, a new HSA-imprinted polymer was synthesized using N-isopropylacrylamide (NIPAM) as the main monomer; acrylamide (AAm), methacrylic acid (MAA), and dimethylaminoethyl methacrylate (DMAEMA) as functional monomers; and oligoglutamic acid-based peptide crosslinker (PC) as a crosslinker at pH 5.5. When pH is adjusted to 7.4, the peptide chains in the polymer change from a helical conformation to an extended coil conformation, and the polymer swells. Consequently, the template protein is removed completely. When pH is adjusted back to 5.5, the peptide chains fold back precisely to the helical conformation. Both the size and shape of the imprint cavities are restored. Therefore, the polymer rebinds the template protein selectively. Highest imprinting factor (IF) was observed at pH 5.5 at which the polymer was synthesized. The IF increases with the increasing number of glutamic acid residues in the PCs because of their increased degree of helicity at pH 5.5. No improvement in imprinting effect was observed when using a peptide crosslinker containing both L- and D-glutamic acid residues and hence incapable of folding into α-helix, further confirming the key role of the pH-induced helix-coil transition of the peptide chains. The MIP synthesized here presents a much higher affinity to HSA than the nontemplate proteins. It could be used repeatedly without evident decrease in sorption capacity. Because of the mild eluting conditions, the secondary structure of the extracted HSA protein remains unchanged. Finally, the MIP was used to deplete HSA from human serum. Because of its high sorption capacity and high selectivity, HSA was depleted completely and selectively. STATEMENT OF SIGNIFICANCE: A new molecularly imprinted polymer (MIP) using human serum albumin (HSA) as a template was synthesized using N-isopropylacrylamide (NIPAM) as the main monomer; acrylamide (AAm), methacrylic acid (MAA), and dimethylaminoethyl methacrylate (DMAEMA) as functional monomers; and oligoglutamic acid-based peptide crosslinker as a crosslinker. Because of the reversible and precise pH-induced helix-coil transition of the peptide chains, the template protein was removed facilely and completely under mild conditions. Simultaneously, a significant improvement in imprinting efficiency was obtained. The sorption capacity was as high as 648.05 mg/g and the imprinting factor was 7.9. Because of its high selectivity and high binding capacity, the MIP synthesized here is highly promising for the depletion of HSA, the most abundant protein in serum, which is a prerequisite for its proteomic analysis. For the first time, complete and selective depletion of HSA from human serum was achieved using a protein-imprinted polymer.

Construction of shape memorable imprinted cavities for protein recognition using oligo-l-lysine-based peptide crosslinker

Protein-imprinted polymers are artificial receptors capable of recognizing protein. They are highly promising for applications in important bio-related areas, however, their development was severely retarded by two problems: difficult template removal and low imprinting efficiency. The two problems could be overcome by constructing shape-memorable imprinted cavities using peptide crosslinker. Here a new oligo-l-lysine-based peptide crosslinker was designed and synthesized. A novel cytochrome c (Cyt C)-imprinted polymer was synthesized using the new peptide crosslinker. When switching pH between 12 and 7.4, the peptide segments incorporated in the polymer underwent reversible helix-coil transition. Because of the precise folding of the peptide segments, the imprinted cavities in the polymer could be enlarged when lowering pH to 7.4 to release the template protein, but restore their original size and shape at pH 12 to recognize the template protein. Therefore complete template removal was achieved under mild conditions. Meanwhile the imprinting efficiency was improved significantly. Compared to polymer crosslinked with the commonly used crosslinker N, N-methylenebisacrylamide, the imprinting efficiency of the peptide-crosslinked polymer was increased by 15 times. The new imprinted polymer presented not only a high adsorption capacity (454.4 mgg^-1), a high imprinting factor (6.3), high selectivity towards Cyt C, and excellent reusability, but also could preserve the fragile secondary structure of the eluted protein, and therefore had high potential in bioseparation. As a demonstration, Cyt C added into fetal bovine serum was separated from the sample using the polymer via a simple adsorption-desorption cycle. The recovery rate was as high as 92.7%.

Recent Advances in Molecularly Imprinted Membranes for Sample Treatment and Separation

This review describes the recent advances from the past five years concerning the development and applications of molecularly imprinted membranes (MIMs) in the field of sample treatment and separation processes. After a short introduction, where the importance of these materials is highlighted, a description of key aspects of membrane separation followed by the strategies of preparation of these materials is described. The review continues with several analytical applications of these MIMs for sample preparation as well as for separation purposes covering pharmaceutical, food, and environmental areas. Finally, a discussion focused on possible future directions of these materials in extraction and separation field is also given.

The status of proteomics as we enter the 2020s: Towards personalised/precision medicine

The last decade has seen many major advances in proteomics, with over 70,000 publications in the field since 2010. A comprehensive omics toolbox has been developed facilitating rapid in depth analysis of the human proteome. Such studies are advancing our understanding of the biology of both health and disease. The combination of proteomics with other omics platforms (the omics pipeline), in particular proteogenomics, is giving important insights to the molecular changes leading to disease, covering the spectrum from genotype to phenotype and identifying potential biomarkers for disease detection, surveillance and monitoring, and revealing potential new drug targets. Discovery-based finding are now being translated to clinical application, supporting the rollout of precision/personalised medicine. This perspective has focused on twelve areas of importance that have fuelled the field. Recent exemplars are given to illustrate this and show how, together with some emerging technologies, they are anticipated to lead to further advances in the field. However, hurdles still remain to be overcome, especially in the area of Big Data analysis.

Hydrogel membranes: A review

Hydrogel membranes (HMs) are defined and applied as hydrated porous media constructed of hydrophilic polymers for a broad range of applications. Fascinating physiochemical properties, unique porous architecture, water-swollen features, biocompatibility, and special water content dependent transport phenomena in semi-permeable HMs make them appealing constructs for various applications from wastewater treatment to biomedical fields. Water absorption, mechanical properties, and viscoelastic features of three-dimensional (3D) HM networks evoke the extracellular matrix (ECM). On the other hand, the porous structure with controlled/uniform pore-size distribution, permeability/selectivity features, and structural/chemical tunability of HMs recall membrane separation processes such as desalination, wastewater treatment, and gas separation. Furthermore, supreme physiochemical stability and high ion conductivity make them promising to be utilised in the structure of accumulators such as batteries and supercapacitors. In this review, after summarising the general concepts and production processes for HMs, a comprehensive overview of their applications in medicine, environmental engineering, sensing usage, and energy storage/conservation is well-featured. The present review concludes with existing restrictions, possible potentials, and future directions of HMs.