Heparin conjugated PCL/Gel – PCL/Gel/n-HA bilayer fibrous membrane for potential regeneration of soft and hard tissues

Improving hemocompatibility in tissue-engineered products employing heparin-loaded nanoplatforms

The enhancement of hemocompatibility through the use of nanoplatforms loaded with heparin represents a highly desirable characteristic in the context of emerging tissue engineering applications. The significance of employing heparin in biological processes is unquestionable, owing to its ability to interact with a diverse range of proteins. It plays a crucial role in numerous biological processes by engaging in interactions with diverse proteins and hydrogels. This review provides a summary of recent endeavors focused on augmenting the hemocompatibility of tissue engineering methods through the utilization of nanoplatforms loaded with heparin. This study also provides a comprehensive review of the various applications of heparin-loaded nanofibers and nanoparticles, as well as the techniques employed for encapsulating heparin within these nanoplatforms. The biological and physical effects resulting from the encapsulation of heparin in nanoplatforms are examined. The potential applications of heparin-based materials in tissue engineering are also discussed, along with future perspectives in this field.

Barrier membranes for periodontal guided bone regeneration: a potential therapeutic strategy

Periodontal disease is one of the most common oral diseases with the highest incidence world-wide. In particular, the treatment of periodontal bone defects caused by periodontitis has attracted extensive attention. Guided bone regeneration (GBR) has been recognized as advanced treatment techniques for periodontal bone defects. GBR technique relies on the application of barrier membranes to protect the bone defects. The commonly used GBR membranes are resorbable and non-resorbable. Resorbable GBR membranes are divided into natural polymer resorbable membranes and synthetic polymer resorbable membranes. Each has its advantages and disadvantages. The current research focuses on exploring and improving its preparation and application. This review summarizes the recent literature on the application of GBR membranes to promote the regeneration of periodontal bone defects, elaborates on GBR development strategies, specific applications, and the progress of inducing periodontal bone regeneration to provide a theoretical basis and ideas for the future application of GBR membranes to promote the repair of periodontal bone defects.

Triple Stimuli-Responsive Flexible Shape Memory Foams with Super-Amphiphilicity

Highly porous multi-responsive shape memory foams have unique advantages in designing 3D materials with lightweight for varied applications. Herein, a facile and efficient approach to fabricating a thermo-, electro-, and photo-responsive shape memory composite foam is demonstrated. A specific multi-step carbonization protocol is adopted for transforming commercial melamine sponge (MS) to highly porous carbon foam (CF) with robust elastic resilience, efficient electrothermal/photothermal conversions, and super-amphiphilicity. It is a novel proposal for CF to take the dual role of the elastic supporting framework and 3D energy conversion/transmission network without any functional fillers. The composite foam cPCL@CF incorporates the CF skeleton with in situ crosslinked polycaprolactone (PCL) layers, which exhibits high conductivity (≈140 S m^-1 ) and excellent light absorption (≈97.7%) in the range of 250-2500 nm. By triggering the crystalline transition of PCL, the composite foam displays sensitive electro- and photo-induced shape memory effect (SME) with outstanding shape fixation ratio (R_f ) and recovery ratio (R_r ). Thanks to the super-amphiphilicity and high electrical conductivity, the cPCL@CF composite foam can give rapid and distinguishable electric signals upon tiny drips of salt solutions or lithium-ion battery (LIB) electrolytes, making it a new type of sensor for detecting electrolyte leakage.

Layered scaffolds in periodontal regeneration

Periodontitis is a common inflammatory disease in dentistry that may lead to tooth loss and aesthetic problems. Periodontal tissue has a sophisticated architecture including four sections of alveolar bone, cementum, gingiva, and periodontal ligament fiber; all these four can be damaged during periodontitis. Thus, for whole periodontal regeneration, it is important to form both hard and soft tissue structures simultaneously on the tooth root surface without forming junctional epithelium and ankylosis. This condition makes the treatment of the periodontium a challenging process. Various regenerative methods including Guided Bone/Tissue Regeneration (GBR/GTR) using various membranes have been developed. Although using such GBR/GTR membranes was successful for partial periodontal treatment, they cannot be used for the regeneration of complete periodontium. For this purpose, multilayered scaffolds are now being developed. Such scaffolds may include various biomaterials, stem cells, and growth factors in a multiphasic configuration in which each layer is designed to regenerate specific section of the periodontium. This article provides a comprehensive review of the multilayered scaffolds for periodontal regeneration based on natural or synthetic polymers, and their combinations with other biomaterials and bioactive molecules. After highlighting the challenges related to multilayered scaffolds preparation, features of suitable scaffolds for periodontal regeneration are discussed.

JK-2 loaded electrospun membrane for promoting bone regeneration

Hydrogen sulfide (H₂S) has been as an essential gasotransmitter and a potential therapeutic approach for several biomedical treatments such as cardiovascular disorders, hypertension, and other diseases. The endogenous and exogenous H₂S also plays a crucial role in the bone anabolic process and a protective mechanism in cell signalling. In this study, we have utilized two types of polymers, polycaprolactone (PCL) and gelatin (Gel), for the fabrication of JK-2 (H₂S donor) loaded nanofibrous scaffold via electrospinning process for bone healing and bone tissue engineering. Comparing the PCL/Gel and PCL/Gel-JK-2 scaffolds, the latter demonstrated enhanced cell adhesion and proliferation capabilities. Furthermore, both experimental scaffolds have been subjected to an in vivo experiment for 4 and 8 weeks in a bone-defect model of a rabbit to determine their biological responses under physiological conditions. There was an obvious increase in bone regeneration in the PCL/Gel-JK-2 group compared to the control and PCL/Gel groups. These results indicate the use of PCL/Gel scaffolds loaded with JK-2 should be considered for possible bone regeneration.

Structure and biological compatibility of polycaprolactone/zinc-hydroxyapatite electrospun nanofibers for tissue regeneration

Although guided tissue regeneration (GTR) is a useful tool for regenerating lost tissue as bone and periodontal tissue, a biocompatible membrane capable of regenerating large defects has yet to be discovered. This study aimed to characterize the physicochemical properties and biological compatibility of polycaprolactone (PCL) membranes associated with or without nanostructured hydroxyapatite (HA) (PCL/HA) and Zn-doped HA (PCL/ZnHA), produced by electrospinning. PCL, PCL/HA, and PCL/ZnHA were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC). Nanoparticles of HA or ZnHA were homogeneously distributed and dispersed inside the PCL fibers, which decreased the fiber thickness. At 1 wt% of HA or ZnHA, these nanoparticles acted as nucleating agents. Moreover, HA and ZnHA increased the onset of the degradation temperature and thermal stability of the electrospun membrane. All tested membranes showed no cytotoxicity and allowed murine pre-osteoblast adhesion and spreading; however, higher concentrations of PCL/ZnHA showed less cells and an irregular cell morphology compared to PCL and PCL/HA. This article presents a cytocompatible, electrospun, nanocomposite membrane with a novel morphology and physicochemical properties that make it eligible as a scaffold for GTR.

Gelatin coating promotes in situ endothelialization of electrospun polycaprolactone vascular grafts

Rapid endothelialization is crucial for in situ tissue engineering vascular grafts to prevent graft failure in the long-term. Gelatin is a promising nature material that can promote endothelial cells (ECs) adhesion, proliferation, and migration. In this study, the internal surface of electrospun polycaprolactone (PCL) vascular grafts was coated with gelatin. Endothelialization and vascular wall remolding were investigated by imaging and histological studies in the rat abdominal aorta replacement model. The endothelialization of heparinized gelatin-coated PCL (GP-H) vascular grafts was more rapid and complete than heparinized PCL (P-H) grafts. Intimal hyperplasia was milder in the GP-H vascular grafts than the P-H vascular grafts in the long-term. Meanwhile, smooth muscle cells (SMCs) and extracellular matrix (ECM) regeneration were better in the GP-H vascular grafts. By comparison, an aneurysm was observed in the P-H group in 6 months. Calcification was observed in both groups. All vascular grafts were patient after implantation in both groups. Our results showed that gelatin coating on the internal surface of PCL grafts is a simple and effective way to promote endothelialization. A more rapid endothelialization and complete endothelium can inhibit intimal hyperplasia in the long-term.

Engineering Myocardium for Heart Regeneration-Advancements, Considerations, and Future Directions

Heart disease is the leading cause of death in the United States among both adults and infants. In adults, 5-year survival after a heart attack is <60%, and congenital heart defects are the top killer of liveborn infants. Problematically, the regenerative capacity of the heart is extremely limited, even in newborns. Furthermore, suitable donor hearts for transplant cannot meet the demand and require recipients to use immunosuppressants for life. Tissue engineered myocardium has the potential to replace dead or fibrotic heart tissue in adults and could also be used to permanently repair congenital heart defects in infants. In addition, engineering functional myocardium could facilitate the development of a whole bioartificial heart. Here, we review and compare in vitro and in situ myocardial tissue engineering strategies. In the context of this comparison, we consider three challenges that must be addressed in the engineering of myocardial tissue: recapitulation of myocardial architecture, vascularization of the tissue, and modulation of the immune system. In addition to reviewing and analyzing current progress, we recommend specific strategies for the generation of tissue engineered myocardial patches for heart regeneration and repair.