Wound healing and antibacterial capability of electrospun polyurethane nanofibers incorporating Calendula officinalis and Propolis extracts

Antibiotic delivery in the presence of green AgNPs using multifunctional bilayer carrageenan nanofiber/sodium alginate nanohydrogel for rapid control of wound infections

This study constructed bilayer nano-hydrogels using solvent casting and electrospinning techniques. The first layer consisted of a hydrogel containing sodium alginate and gellan gum, while the second layer was a carrageenan/polyvinyl alcohol nanofibrous membrane. The nanohydrogels were prepared with different doses of doxycycline antibiotic (0.12, 0.06, 0.03 g) and a fixed amount of silver nanoparticles (0.012 g), which were synthesized using the green method including Capparis spinosa leaf extract. The films were tested for their mechanical properties, swelling behavior, XRD, and FTIR, and their morphology was characterized using SEM. The biological properties of the nanohydrogels were also extensively assayed. X-ray diffraction analysis showed peak 111 for silver nanoparticles. Incorporating silver nanoparticles significantly enhanced nanohydrogels' mechanical and antibacterial properties and improved their ability to heal wounds. Nanohydrogels exhibited biodegradability, biocompatibility, anti-inflammatory properties (57.63 %), and high cell viability (>85 %) in laboratory conditions. The study confirmed that wound dressings containing doxycycline with controlled release are highly effective against pathogenic bacteria and prevent the formation of biofilms (92 %). The rats in-vivo study demonstrated that 100 % wound closure was achieved in nanohydrogels containing SA/GG/PVA/CAR/AgNPs/DOX0.12 after 14 days. The films could potentially lead to the development of new treatments against bacterial infections and inflammatory conditions of wounds.

Investigation of a novel bilayered PCL/PVA electrospun nanofiber incorporated Chitosan-LL37 and Chitosan-VEGF nanoparticles as an advanced antibacterial cell growth-promoting wound dressing

Chronic wounds have become a growing concern as they can have a profound impact on individuals, potentially resulting in mortality. It is crucial to prevent and manage bacterial infections, particularly drug-resistant ones. Antimicrobial peptides, such as LL-37, can firmly eliminate pathogens. Additionally, the process of angiogenesis, facilitated by growth factors like VEGF, is essential for tissue repair and wound healing. To enhance the stability and bioavailability of therapeutic agents, targeted delivery strategies utilizing Chitosan-based carriers have been employed. Electrospun biopolymers in advanced wound dressings have revolutionized wound care by providing a more effective and efficient solution for promoting tissue regeneration and speeding up the healing process. The present investigation utilized Chitosan nanoparticles to encapsulate the recombinant LL37 peptide and VEGF. An in-depth investigation was carried out to analyze the biophysical and morphological traits of the LL37-CSNPs and VEGF-CSNPs. The first support layer consisted of PCL electrospun nanofiber, followed by the electrospinning of PVA/CsLL37, PVA/CsVEGF, and PVA/CsLL37/CsVEGF onto the PCL layer. An in vitro examination assessed the fabricated nanofibers' morphological, mechanical, and biological characteristics. The antimicrobial effects were tested on methicillin-resistant Staphylococcus aureus (MRSA). The in vivo experiments assessed the antibacterial and wound-healing capabilities of the nanofibers. The findings validated the continuous release of LL37 and VEGF. The composite material PCL/PVA/CsLL37/CsVEGF demonstrated potent bactericidal and antioxidant characteristics. The cytotoxic assay demonstrated the biocompatibility of the fabricated nano mats and their potential to accelerate fibroblast cell proliferation. The efficacy of PVA/CsLL37/CsVEGF in promoting wound healing was confirmed through an in vivo wound healing assay. Furthermore, the histological analysis provided evidence of faster epidermal formation and improved antibacterial activity in wounds covered with PVA/CsLL37/CsVEGF. Adding LL37 and VEGF to the composite material improves the immune response and promotes blood vessel formation, accelerating wound healing and decreasing inflammation.

Electrospun PCL/PVA/PHMB nanofibers incorporating Ziziphus jujuba fruit extract as promising wound dressings with potent antibacterial and antidiabetic properties

This investigation examined the potential antibacterial and antidiabetic effects of wound dressings created using electrospun nanofibers containing Ziziphus jujuba fruit extract (ZJ). These nanofibers were composed of a combination of Polycaprolactone (PCL), Polyvinyl Alcohol (PVA), and Polyhexamethylene Biguanide (PHMB). The process of creating these nanofibers involved electrospinning. The nanofiber products, which included PCL, PCL/PVA, PCL/PVA/ZJ, PCL/PVA/PHMB, and PCL/PVA/PHMB/ZJ, underwent a morphology, physicochemical, and biological assessment. Incorporating PHMB into the nanofibers enhanced the antibacterial properties, effectively preventing bacterial infections in wounds. Furthermore, including ZJ fruit extract in the nanofibers provided antidiabetic properties, making these dressings suitable for diabetic patients. The PCL/PVA/PHMB/ZJ combination exhibited exceptional healing capabilities and superior antibacterial efficiency in MRSA-infected wounds. The histological assay confirmed complete wound healing by day 14, accompanied by reduced inflammation. Based on these findings, using PCL/PVA/PHMB/ZJ as innovative wound dressings is recommended, as they can expedite wound healing while offering significant antidiabetic and antibacterial features. Ultimately, these electrospun nanofibers possess the potential to serve as advanced wound dressings with enhanced antibacterial and anti-diabetes properties.

Advances in Chronic Wound Management: From Conventional Treatment to Novel Therapies and Biological Dressings

Chronic wounds can be classified as diabetic foot ulcers, pressure ulcers, or venous leg ulcers. Chronic wound management has become a threat to clinicians and constitutes a major healthcare burden. The healing process of chronic wounds requires many factors to work in concert to achieve optimal healing. Various treatment options, ranging from hypoxia to infection, have evolved considerably to address the challenges associated with chronic wound healing. The conventional and accelerating treatments for chronic wounds still represent an unmet medical need due to the complex pathophysiology of the chronic wound microenvironment. In clinical settings, traditional chronic wound care practices rely on nonspecific topical treatment, which can reduce pain and alleviate disease progression with varying levels of success but fail to completely cure the wounds. Conventional wound dressings, such as hydrocolloids, gauze, foams, and films, have also shown limited success for the treatment of chronic wounds and only act as a physical barrier and absorb wound exudates. Emerging advances in treatment approaches, including novel therapies (stem cells, microRNAs, and nanocarrier-based delivery systems) and multifunctional biological dressings, have been reported for chronic wound repair. This review summarizes the challenges offered by chronic wounds and discusses recent advancements in chronic wound treatment.

Applications of propolis-based materials in wound healing

Due to its excellent antiseptic efficacy and antimicrobial properties, propolis has shown attractive advantages in wound dressings. However, an inclusive review of the propolis-based materials as a wound dressing is still lacking. The current short review summarizes the skin wound healing process, relates evaluation parameters, and then reviews the refined propolis-based materials dressings such as antimicrobial property, adhesion and hemostasis, anti-inflammatory and substance delivery. The approaches implemented to achieve these functions are classified and discussed. Furthermore, applications of propolis wound dressing for treating different types of wounds such as heal wounds, burns, and ulcers are presented. The future directions of propolis-based wound dressings for wound healing are further proposed. This review showed that propolis-based materials might be a promising new dressing for wound occlusion and tissue repairing.

Nanofiber Scaffolds as Drug Delivery Systems Promoting Wound Healing

Nanofiber scaffolds have emerged as a revolutionary drug delivery platform for promoting wound healing, due to their unique properties, including high surface area, interconnected porosity, excellent breathability, and moisture absorption, as well as their spatial structure which mimics the extracellular matrix. However, the use of nanofibers to achieve controlled drug loading and release still presents many challenges, with ongoing research still exploring how to load drugs onto nanofiber scaffolds without loss of activity and how to control their release in a specific spatiotemporal manner. This comprehensive study systematically reviews the applications and recent advances related to drug-laden nanofiber scaffolds for skin-wound management. First, we introduce commonly used methods for nanofiber preparation, including electrostatic spinning, sol-gel, molecular self-assembly, thermally induced phase separation, and 3D-printing techniques. Next, we summarize the polymers used in the preparation of nanofibers and drug delivery methods utilizing nanofiber scaffolds. We then review the application of drug-loaded nanofiber scaffolds for wound healing, considering the different stages of wound healing in which the drug acts. Finally, we briefly describe stimulus-responsive drug delivery schemes for nanofiber scaffolds, as well as other exciting drug delivery systems.

Supercritical Impregnation of Mesoglycan and Lactoferrin on Polyurethane Electrospun Fibers for Wound Healing Applications

Fibrous membranes of thermoplastic polyurethane (TPU) were fabricated through a uni-axial electrospinning process. Fibers were then separately charged with two pharmacological agents, mesoglycan (MSG) and lactoferrin (LF), by supercritical CO₂ impregnation. Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) analysis proved the formation of a micrometric structure with a homogeneous distribution of mesoglycan and lactoferrin. Besides, the degree of retention is calculated in four liquid media with different pHs. At the same time, angle contact analysis proved the formation of a hydrophobic membrane loaded with MSG and a hydrophilic LF-loaded one. The impregnation kinetics demonstrated a maximum loaded amount equal to 0.18 ± 0.20% and 0.07 ± 0.05% for MSG and LT, respectively. In vitro tests were performed using a Franz diffusion cell to simulate the contact with the human skin. The release of MSG reaches a plateau after about 28 h while LF release leveled off after 15 h. The in vitro compatibility of electrospun membranes has been evaluated on HaCaT and BJ cell lines, as human keratinocytes and fibroblasts, respectively. The reported data proved the potential application of fabricated membranes for wound healing.

Synthesis and characterization of low surface energy thermoplastic polyurethane elastomers based on polydimethylsiloxane

Organosilicon modified polyurethane elastomers (Si-MTPUs) were synthesized in order to improve the anti-graffiti property of thermoplastic polyurethane elastomers (TPUs). Si-MTPUs were prepared from polydimethylsiloxane (PDMS) and polytetramethylene glycol (PTMG) as mixed soft segment, 1,4-butanediol (BDO) and imidazole salt ionic liquid N-glyceryl-N-methyl imidazolium chloride ([MIM_l,g]Cl) used as chain extender, and 4,4'-dicyclohexylmethane diisocyanate (HMDI). The structure, thermal stability, mechanical properties and physical crosslinking density of Si-MTPUs were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetry analysis (TGA), mechanical test and low field nuclear magnetic resonance. Surface energy and water absorption were characterized by static contact angle test and water resistance test, and anti-graffiti and self-cleaning properties were characterized with water, milk, ink, lipstick, oily markers and spray paint. It was found that the mechanical properties of Si-MTPU-10 with the content of PDMS 10 wt% were optimized, with a maximum tensile strength of 32.3 MPa and elongation at break of 656%. Surface energy reached the minimum value of 23.1 mN m^-1 with the best anti-graffiti performance, which no longer decreased with the increase of PDMS contents. This work provides novel idea and strategy for the preparation of low surface energy TPUs.