Determination of Carbaryl in Vegetables Using an Immunosensor Working in Organic Media

Determination of traces of several pesticides in sunflower oil using organic phase immuno electrodes (OPIEs)

Testing for traces of different pesticides (triazinic, organophosphates and chlorurates), present in hydrophobic matrices such as sunflower oil was checked using new immunosensors working in organic solvent mixtures (OPIEs). The competitive process took place in an n-hexane-chloroform 75% (V/V) mixture, while the subsequent final enzymatic measurement was performed in decane using tert-butylhydroperoxide as substrate of the enzymatic reaction. A Clark electrode was used as transducer and peroxidase enzyme as marker. A linear response of between about 10 nM and 4 μM was usually obtained in the presence of sunflower oil. Immunosensors show satisfactory selectivity and precision and recovery tests carried out on commercial sunflower oil samples gave excellent results. Lastly, theoretical confirmation of the possibility that immunosensors can act positively in organic solvent mixtures was discussed on the basis of Hill׳s coefficient values.

Site-directed antibody immobilization techniques for immunosensors

Immunosensor sensitivity, regenerability, and stability directly depend on the type of antibodies used for the immunosensor design, quantity of immobilized molecules, remaining activity upon immobilization, and proper orientation on the sensing interface. Although sensor surfaces prepared with antibodies immobilized in a random manner yield satisfactory results, site-directed immobilization of the sensing molecules significantly improves the immunosensor sensitivity, especially when planar supports are employed. This review focuses on the three most conventional site-directed antibody immobilization techniques used in immunosensor design. One strategy of immobilizing antibodies on the sensor surface is via affinity interactions with a pre-formed layer of the Fc binding proteins, e.g., protein A, protein G, Fc region specific antibodies or various recombinant proteins. Another immobilization strategy is based on the use of chemically or genetically engineered antibody fragments that can be attached to the sensor surface covered in gold or self-assembled monolayer via the sulfhydryl groups present in the hinge region. The third most common strategy is antibody immobilization via an oxidized oligosaccharide moiety present in the Fc region of the antibody. The principles, advantages, applications, and arising problems of these most often applied immobilization techniques are reviewed.

Optical immunosensors for environmental monitoring: How far have we come?

Immunosensing has proved to be a very interesting research area. This review discusses what has actually been achieved in the field of optical immunosensing for environmental screening, and what still needs to be done. The review is presented from a practical point of view. In terms of the basic design of the immunosensor, there is a trend towards decreasing assay time; indeed, this has been reduced from 15-20 minutes to less than 5 minutes. Another goal is to simplify the manifold, and label-free approaches combining indirect assay formats and the detection of antibody binding are popular. Rapid displacement assays have also been investigated thoroughly. In terms of some important features of immunosensing devices, the reusability of the sensing element has been studied in great depth, and working lifetimes of more than five hundred assays can now be found for all assay formats. Multianalyte assays are now being investigated, and current systems are able to monitor 2-3 target compounds, although this number is set to increase greatly (to >30) in the near future. In this sense, an increasing number of publications can be found on microarrays intended for multianalyte determinations. The application of immunosensing to real situations is the main challenge. Immunosensors are barely commercialized and are yet to be established as research or routine tools, due to a lack of validated protocols for a wide range of sample matrices. Regarding compounds considered as analytes, some significant pollutants such as dioxins or pharmaceuticals are rarely chosen as targets, although the current tendency is towards a broader spectrum of analytes. New immunoreagents should be raised for these compounds, for use in immunosensors that can be used as screening tools.

Development of multianalyte flow-through and lateral-flow assays using gold particles and horseradish peroxidase as tracers for the rapid determination of carbaryl and endosulfan in agricultural products

Membrane-based competitive immunoassays using gold particles and horseradish peroxidase (HRP) as tracers in flow-through and lateral-flow formats for multianalysis of carbaryl and endosulfan were developed. For gold-based immunoassay, membrane strips were coated with goat anti-rabbit IgG (control line) and carbaryl hapten-ovalbumin (OVA) and endosulfan hapten-OVA (test lines). The visual detection limits for carbaryl and endosulfan were 100 and 10 microg/L in gold-based assays, respectively. For immunoassay using HRP as tracer, anti-carbaryl and anti-endosulfan antibodies were separately coated on the membrane as test lines, and the visual detection limits were 10 microg/L for carbaryl and 1 microg/L for endosulfan. The developed assays used gold particles and HRP as labels, respectively; 10 times enhancement in the visual detection limit using HRP label was obtained in the study. Matrix interference was eliminated by appropriate dilution of sample extracts with buffer. For the validation of the multianalyte assay, the samples were screened by multianalyte gold-based assay and confirmed by HPLC for carbaryl determination and by GC for endosulfan determination. The results of multianalyte gold-based flow-through assay for the determination of carbaryl and endosulfan were in good agreement with the results of instrumental analysis (HPLC with ultraviolet detection and GC with electron capture detection). The developed multianalyte immunoassays for which the results were interpreted visually can be used as convenient qualitative tools for on-site rapid screening of carbaryl and endosulfan simultaneously in agricultural products.