Phosphate adsorption from aqueous solution by lanthanum-iron hydroxide loaded with expanded graphite

B-site metal modulation of phosphate adsorption properties and mechanism of LaBO3 (B = Fe, Al and Mn) perovskites

La-based adsorbents are widely used for controlling phosphate concentration in water bodies. In order to explore the effect of different B-site metals regulating La-based perovskites on phosphate adsorption, three La-based perovskites (LaBO₃, B = Fe, Al, and Mn) were prepared using the citric acid sol-gel method. Adsorption experiments showed that LaFeO₃ exhibited the highest adsorption capacity for phosphate, which was 2.7 and 5 times higher than those of LaAlO₃ and LaMnO₃, respectively. The characterization results demonstrated that LaFeO₃ has dispersed particles exhibiting larger pore size and more pores than LaAlO₃ and LaMnO₃. Spectroscopy analysis and density functional theory calculation results showed that different B-positions cause a change in the type of perovskite crystals. Among them, the differences between lattice oxygen consumption ratio, zeta potential and adsorption energy are the main reasons for the differences in adsorption capacity. In addition, the adsorption of phosphate by La-based perovskites were well fitted with Langmuir isotherm and pursues the pseudo-second-order kinetic models. The maximum adsorption capacities were 33.51, 12.31 and 6.61 mg/g for LaFeO₃, LaAlO₃ and LaMnO₃, respectively. The adsorption mechanism was mainly based on inner-sphere complexation and electrostatic attraction. This study provides an explanation for the influence of different B sites on phosphate adsorption by perovskite.

Efficient phosphate elimination from aqueous media by La/Fe bimetallic modified bentonite: Adsorption behavior and inner mechanism

Nowadays, eutrophication problem in surface waterbodies has attracted specific attention. Herein, we reported facile synthesis and application of La/Fe engineered bentonite (LFB) for efficient phosphate elimination. Results indicated that bimetallic modified LFB composite could achieve efficient phosphate removal at pH 2-6, and satisfactory selectivity was implied by stable phosphate capturing within the interference of competing species (Cl^-, NO₃^-, HCO₃^-, SO₄^2-, F^- and HA). Pseudo-second-order model could satisfactorily depict the kinetic behavior at different initial concentrations, indicating chemisorption of phosphate on LFB surface. Isotherm study suggested that phosphate adsorption behavior could be fitted well with Sips isotherm equation, indicating that both homogeneous monolayer adsorption and heterogeneous multilayer coverage of phosphate on LFB surface occurred within the investigated conditions. Adsorption thermodynamics implied the spontaneous and endothermic feature of phosphate loading on LFB composite. Characterization analysis confirmed successful La and Fe loading on bentonite, and electrostatic attraction and ligand exchange were the main adsorption mechanism. The high adsorption capacity, cost-effective feature and strong affinity towards phosphate demonstrated certain potential of as-prepared LFB composite for phosphate separation from eutrophic water.

Phosphate Adsorption onto an Al-Ti Bimetal Oxide Composite in Neutral Aqueous Solution: Performance and Thermodynamics

Phosphorus (P) pollution and phosphorus recovery are important issues in the field of environmental science. In this work, a novel Al-Ti bimetal composite sorbent was developed via a cost-effective co-precipitation approach for P removal from water. The adsorptive performance and characteristics of P onto Al-Ti sorbent were evaluated by batch adsorption experiments. The effects of Al:Ti molar ratio, initial P concentration and reaction temperature were investigated. The microstructural characteristics of the Al-Ti sorbent were confirmed by scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis, Fourier transform infrared (FTIR) spectroscopy, and nitrogen adsorption-desorption measurements. Kinetic studies showed that the adsorption of P on Al-Ti oxide proceeds according to pseudo-second-order kinetics. The maximum adsorption capacity of phosphate on the Al-Ti oxide calculated from linear Langmuir models was 68.2 mg-P/g at pH 6.8. The Al-Ti oxide composite sorbent showed good potential for P recovery, owing to its large adsorption capacity and ease of regeneration.

Removal of phosphate at low concentration from water by porous PVA/Al2O3 composites

The porous polyvinyl alcohol (PVA)/Al₂O₃ composite by supporting activated alumina on the cross-linked network of PVA has been successfully prepared and its property for the removal of phosphate in aqueous solution was also evaluated. The structure of the PVA/Al₂O₃ was examined by scanning electron microscopy. It showed that the activated alumina particles with an average size of 1 μm were evenly dispersed and fixed in the cross-linked network structure of PVA. The effects of adsorption time, solution temperature, pH, initial concentration of phosphate, Al₂O₃ loading rate, dosage and coexisting ions on the phosphate removal were further studied. The results showed that the highest removal phosphate efficiency of 95% can be obtained with the Al₂O₃ loading rate of PVA/Al₂O₃ being 60 wt.% at pH of 4 at 30 °C. The maximum adsorption capacities of PO43- by PVA/Al₂O₃ suggested by the Langmuir isothermal model was 10.12 mg/g. The adsorption process of phosphate can be fit well with a pseudo-second-order model (R² = 0.9900). The PVA/Al₂O₃ composite exhibited a high selective adsorption of phosphate in the presence of commonly coexisting anions except the obvious effect of CO32- in water. Meanwhile, the PVA/Al₂O₃ composite can be easily separated and recovered due to the granulation of adsorbent. PVA/Al₂O₃ composite also shows the excellent properties of regeneration and recycling use with the removal efficiency of phosphate was 88.93%, 88.38% and 94.34% after three cycles, respectively. It can be proposed that the PVA/Al₂O₃ composite is a promising recyclable adsorbent for removing phosphate at low concentration from aqueous solution.

Biochar-loaded Ce3+-enriched ultra-fine ceria nanoparticles for phosphate adsorption

Biochar-loaded Ce³⁺-enriched ultra-fine ceria nanoparticles (Ce-BC) was prepared by a facile impregnation-precipitation-pyrolysis process and applied as adsorbents to adsorb phosphate from water. The crystal size of ceria nanoparticles in the Ce-BC was as small as 2-5 nm and the concentration of Ce³⁺ was high to 59.6 %, which was benefited from the rapid precipitation, N₂ pyrolysis atmosphere and the presence of the biochar during preparation. Ce-BC exhibited a fast adsorption kinetics for phosphate and the adsorption equilibrium could be reached within 10 min. The maximum phosphate adsorption capacity was up to 77.7 mg P g^-1 at pH 3.0. Based on Fourier transform infrared (FTIR), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS) analysis, Ce³⁺ of ceria was demonstrated playing the vital role on phosphate removal and the formation of CePO₄ nanocrystals was the main adsorption mechanism. This work provides a facile strategy for preparing high Ce³⁺ contenting materials and shows a great potential application for the phosphate removal for its high-effective and high stability.

PVA/PEI crosslinked electrospun nanofibers with embedded La(OH)3 nanorod for selective adsorption of high flux low concentration phosphorus

Phosphorus (P) is a limiting element causing eutrophication, and thus, its removal has elicited significant attention in recent years. In this study, a La(OH)₃ embedded nanorod loaded PVA/PEI crosslinked nanofiber membrane (LNPPM) was synthesized for phosphorus removal at a low concentration and under high flux conditions. Comparative tests demonstrated that an LNPPM exhibited a high phosphate adsorption capacity (165.9 mg P/g La) and performed well even under interference with the pH and coexisting ions (Cl^-, SO₄^2-, NO₃^-, and F^-). Through a continuous adsorption test, LNPPM also showed a fast adsorption efficiency with a 73.7% capacity used for C/C₀ = 0.5 under a low concentration and high flux phosphate solution. Fourier transform infrared, X-ray diffraction, X-ray photoelectron spectroscopy, SEM-EDS, and high-resolution transmission electron microscopy analyses indicated that the La(OH)₃ nanorod intensively and uniformly embedded into the nanofibers, providing an ideal condition for phosphate adsorption. A mechanistic analysis showed that the ligand exchange played a vital role in the phosphate adsorption of LNPPM. A cost index (capacity/synthesis cost) comparison with typical super phosphate adsorbents also indicated that LNPPM (795 mg P/USD) could be a viable option owing to its simple synthesis procedure, low synthesis cost, and considerable capacity. This technique shows promise for use in most dephosphorization applications.