Impact of seawater salinity on the sonochemical removal of emerging organic pollutants

The impact of inorganic salts on the ultrasonic degradation of contaminants: A review

This comprehensive review explores the interplay between inorganic salts and ultrasound-assisted degradation of various contaminants. The addition of salt to aqueous matrices has been attributed to increasing contaminant degradation via the salting-out effect. However, research investigating the impact of salt on degradation has yielded inconsistent results. This review incorporated degradation information from 44 studies organizing data according to compound class and ionic strength to analyze the impact of inorganic salts on cavitation bubble dynamics, contaminant behavior, radical species generation, and contaminant degradation. Frequency and salt type were assessed for potential roles in contaminant degradation. The analysis showed that high intensity ultrasound was most beneficial to degradation in salt solutions. Unexpectedly, hydrophilic compounds showed marked enhancement with increasing ionic strength while many hydrophobic compounds did not benefit as greatly. Based on the collected data and analysis, enhanced degradation in the presence of salt appears to be primarily radical-mediated rather than due to the salting-out effect. Finally, the analysis provides guidance for designing sonolytic reactors for contaminant degradation.

Sonochemistry dosimetries in seawater

Due to the complex physical and chemical interactions taking place in the sonicated medium, various methods have been proposed in the literature for a better understanding of the sonochemical system. In the present paper, the performance of calorimetry, iodometry, Fricke, 4-nitrophenol, H2O2, and ascorbic acid dosimetry techniques have been evaluated over the electric power range from 20 to 80 W (f = 300 kHz). These methods have been analyzed for distilled and seawater in light of the literature findings. It has been found that the lowest temperatures and calorimetric energies were obtained for seawater in comparison to distilled water. However, the discrepancy between both mediums disappears with the increase in the electric power up to 80 W. Compared to the calorimetry results, a similar trend was obtained for the KI dosimetry, where the discrepancy between both solutions (seawater and distilled water) increased with the reduction in the electric power down to 20 W. In contrast, over the whole range of the electric power (20-80 W), the H2O2 dosimetry was drastically influenced by the salt composition of seawater, where, I3- formation was clearly reduced in comparison to the case of the distilled water. On the other hand, a fluctuated behavior was observed for the Fricke and 4-nitrophenol dosimetry methods, especially at the low electric powers (20 and 40 W). It has been found that dosimetry techniques based on ascorbic acid or potassium iodide are the best means for accurate quantification of the sonochemical activity in the irradiated liquid. As a result, it has been concluded, in terms of the dosimetry process's performance, that the dosimetry methods are in the following order: Ascorbic acid ≈ KI > Fricke > 4-nitrophenol > H2O2.

Removal of organic pollutants in shale gas fracturing flowback and produced water: A review

Shale gas has been developed as an alternative to conventional energy worldwide, resulting in a large amount of shale gas fracturing flowback and produced water (FPW). Previous studies focus on total dissolved solids reduction using membrane desalination. However, there is a lack of efficient and stable techniques to remove organic pollutants, resulting in severe membrane fouling in downstream processes. This review focuses on the concentration and chemical composition of organic matter in shale gas FPW in China, as well as the hazards of organic pollutants. Organic removal techniques, including advanced oxidation processes, coagulation, sorption, microbial degradation, and membrane treatment are systematically reviewed. In particular, the influences of high salt on each technique are highlighted. Finally, different treatment techniques are evaluated in terms of energy consumption, cost, and organic removal efficiency. It is concluded that integrated coagulation-sorption-Fenton-membrane filtration represents a promising treatment process for FPW. This review provides valuable information for the feasible design, practical operation, and optimization of FPW treatment.

A critical review on the sonochemical degradation of organic pollutants in urine, seawater, and mineral water

Substances such as pharmaceuticals, pesticides, dyes, synthetic and natural hormones, plasticizers, and industrial chemicals enter the environment daily. Many of them are a matter of growing concern worldwide. The use of ultrasound to eliminate these compounds arises as an interesting alternative for treating mineral water, seawater, and urine. Thereby, this work presents a systematic and critical review of the literature on the elimination of organic contaminants in these particular matrices, using ultrasound-based processes. The degradation efficiency of the sonochemical systems, the influence of the nature of the pollutant (volatile, hydrophobic, or hydrophilic character), matrix effects (enhancement or detrimental ability compared to pure water), and the role of the contaminant concentration were considered. The combinations of ultrasound with other degradation processes, to overcome the intrinsic limitations of the sonochemical process, were considered. Also, energy consumptions and energy costs associated with pollutants degradation in the target matrices were estimated. Moreover, the gaps that should be developed in future works, on the sonodegradation of organic contaminants in mineral water, seawater, and urine, were discussed.