Study on the correlation between pore morphology of porous calcium silicate and high-capacity formaldehyde adsorption

Plant-based calcium silicate from rice husk ash: A green adsorbent for free fatty acid recovery from waste frying oil

Driven by the urgent need for a solution to tackle the surge of rice husk (RH) and waste frying oil (WFO) waste accumulation at a global scale, this report highlights the use of calcium silicates (CS) extracted from acid-pre-treated rice husk ash (RHA) for free fatty acid (FFA) removal from WFO as conventional RHA shows limited FFA adsorption performance. A novel alkaline earth silicate extraction method from acid-pre-treated RHA was outlined. The structural and behavioural attributes of the synthesised CS were identified through BET, SEM-EDS, and XRD analyses and compared to those of RHA. Notable morphology and structural modification were determined, including reducing specific surface areas, mitigating from amorphous to crystalline structure with regular geometric forms, and detecting Si-O-Ca functional groups exclusive to CS adsorbents. A comparison study showed superior lauric acid (LA) adsorption performance by CS absorbents over acid-pre-treated RHA, with a significant increase from 0.0831 ± 0.0004 mmol LA/g to 2.5808 ± 0.0011 mmol LA/g after 60 min. Recognised as the best-performing CS adsorbent, CS-1.0 was used for further investigations on the effect of dosage, LA concentration, and temperature for efficient LA adsorption, with up to 100% LA removal and 5.6712 ± 0.0016 mmol LA/g adsorption capacity. The adsorption isotherm and kinetic studies showed LA adsorption onto CS-1.0 followed Freundlich isotherm with KF = 0.0598 mmol(1-1/n) L(1/n) g-1 & Qe,cal = 3.1696 mmol g-1 and intraparticle diffusion model with kid = 0.1250 mmol g-1 min0.5 & Ci = 0.9625 mmol g-1, indicating rapid initial adsorption and involvement of carboxylate end of LA and the calcium ions on the CS-1.0 in the rate-limiting step. The high equilibrium adsorption capacity and LA adsorption rate indicated that the proposed CS-1.0 adsorbent has excellent potential to recover FFA from WFO effectively.

Amine-Impregnated Dendritic Mesoporous Silica for the Adsorption of Formaldehyde

To adsorb and remove formaldehyde, which is a harmful volatile organic chemical (VOC) detected indoors, an alkylamine was introduced into the substrate as a formaldehyde adsorbent. In this study, Tetraethylenepentaamine (TEPA) was introduced into the mesoporous silica using the amine impregnation method. Since the impregnated alkylamine can block the pores of the silica substrate, the pore size and pore volume are very important factors for its use as a substrate for an adsorbent. Focusing on the substrate's pore properties, Santa Barbara Amorphous-15 (SBA-15) was chosen as a conventional one-dimensional pore-structured mesoporous silica, and dendritic mesoporous silica (DMS) as a three-dimensional pore-structured mesoporous silica. To 1 g each of silica substrate DMS and SBA-15, 0, 0.5, 1.5, and 2.5 g of TEPA were introduced. A fixed concentration and amount of formaldehyde gas was flowed through the adsorbent and then the adsorbent was changed to the 2,4-Dinitrophenylhydrazine (2,4-DNPH) cartridge to adsorb the remaining formaldehyde. According to the methods recommended by the World Health Organization (WHO) and National Institute for Occupational Safety & Health (NIOSH), the formaldehyde captured by 2,4-DNPH was analyzed using high-performance liquid chromatography (HPLC). A comparison of DMS and SBA-15 in the amine impregnation method shows that not only surface area, but also large pore size and high pore volume, contribute to the formaldehyde adsorption ability.

Facile Mesoporous Hollow Silica Synthesis for Formaldehyde Adsorption

Formaldehyde emitted from household products is classified as a hazardous substance that can adversely affect human health. Recently, various studies related to adsorption materials for reducing formaldehyde have been widely reported. In this study, mesoporous and mesoporous hollow silicas with amine functional groups introduced were utilized as adsorption materials for formaldehyde. Formaldehyde adsorption characteristics of mesoporous and mesoporous hollow silicas having well-developed pores were compared based on their synthesis methods-with or without a calcination process. Mesoporous hollow silica synthesized through a non-calcination process had the best formaldehyde adsorption characteristics, followed by mesoporous hollow silica synthesized through a calcination process and mesoporous silica. This is because a hollow structure has better adsorption properties than mesoporous silica due to large internal pores. The specific surface area of mesoporous hollow silica synthesized without a calcination process was also higher than that synthesized with a calcination process, leading to a better adsorption performance. This research suggests a facile synthetic method of mesoporous hollow silica and confirms its noticeable potential as a support for the adsorption of harmful gases.

Unravelling the intrinsic synergy between Pt and MnOx supported on porous calcium silicate during toluene oxidation

Developing efficient catalysts that enhance electronic interactions between active metal sites is a promising strategy for removing volatile organic compounds (VOCs).

One-step fabrication of electrospun flexible and hierarchically porous Pt/γ-Al2O3 nanofiber membranes for HCHO and particulate removal

A flexible Pt/γ-Al2O3 nanofiber membrane with optimal 2 wt% Pt content can effectively decompose HCHO into CO2 at room temperature.

Synthesis of novel highly-dispersed manganese oxide on porous calcium silicate for the catalytic oxidation of toluene

Highly-dispersed MnOx with abundant oxygen vacancy on porous calcium silicate for the catalytic oxidation of toluene.

Dispersed FeOx nanoparticles decorated with Co2SiO4 hollow spheres for enhanced oxygen evolution reaction

Oxygen evolution reaction (OER) has drawn ever-increasing attention because of its essential role in various renewable-energy technologies. In spite of tremendous research efforts, developing high-performance OER catalysts at low cost remains a great challenge. Inspired by two earth-abundant elements Fe and Si, herein, we report a Fe-Co₂SiO₄ composite consisting of well dispersed iron oxide (FeO_x) decorated Co₂SiO₄ hollow nanospheres as an economical and promising OER catalyst. Although Co₂SiO₄ or FeO_x alone has little OER activity, their composite exhibits satisfied performance, that is highly related to geometric effect and bimetal component electronic interactions. The Fe-Co₂SiO₄ composite exhibits comparable catalytic activity to most of transition mental oxide/hydroxide relevant composites at 10 mA cm^-2. It is even 1.6 times higher than commercial RuO₂ electrocatalyst at high current density 100 mA cm^-2 in alkaline solution. In this work, surface decoration of transition metal silicate provides a new horizon to design high-performance and economical OER catalysts.