Influence of initial pH on the production of volatile fatty acids and hydrogen during dark fermentation of kitchen waste

Biohythane production from two-stage anaerobic digestion of food waste: A review

The biotransformation of food waste (FW) to bioenergy has attracted considerable research attention as a means to address the energy crisis and waste disposal problems. To this end, a promising technique is two-stage anaerobic digestion (TSAD), in which the FW is transformed to biohythane, a gaseous mixture of biomethane and biohydrogen. This review summarises the main characteristics of FW and describes the basic principle of TSAD. Moreover, the factors influencing the TSAD performance are identified, and an overview of the research status; economic aspects; and strategies such as pre-treatment, co-digestion, and regulation of microbial consortia to increase the biohythane yield from TSAD is provided. Additionally, the challenges and future considerations associated with the treatment of FW by TSAD are highlighted. This paper can provide valuable reference for the improvement and widespread implementation of TSAD-based FW treatment.

Comparative effect of acid and heat inoculum pretreatment on dark fermentative biohydrogen production

This study delves into the impact of various pretreatment methods on the inoculum in dark fermentation trials, specifically exploring thermal shock at different temperatures (60, 80, and 100 °C) and durations (15, 30, and 60 min), as well as acid shock at pH 5.5. Initial acidification of the substrate/inoculum mixture facilitates H2 generation, making acid shock an effective pretreatment option. However, it is also observed that combining thermal and acid pretreatments boosts H2 production synergistically. The synergy between thermal and acid pretreatments results in a significant improvement, increasing the overall hydrogen production efficiency by more than 9% compared to assays involving acidification alone. This highlights the considerable potential for optimizing pretreatment strategies. Furthermore, the study sheds light on the critical role of inoculum characteristics in the process, with diverse hydrogen-generating bacteria significantly influencing outcomes. The established equivalent performance of HCl and H2SO4 in inoculum pretreatment demonstrates the versatility of these acids in shaping the microbial community and influencing hydrogen production. The analysis of glucose conversion data highlights a prevalence of butyric acid in all trials, irrespective of the pretreatment method, emphasizing the dominance of the butyrate pathway in hydrogen generation. Additionally, an examination of the microbial community offers valuable insights into the intricate relationships between temperature, pH, and microbial diversity. Bacteroidota established its dominance among the bacterial populations, with a relative abundance exceeding 20-25% in the raw inoculum, and this dominance further increased following the treatment. Thermal and acid pretreatments result in significant shifts in dominant microbial communities, with some non-dominant phyla like Cloacimonadota and Spirochaetota becoming more prominent. These shifts in microbial diversity underscore the sensitivity of microbial communities to environmental conditions and pretreatment methods, further highlighting the importance of understanding their dynamics in dark fermentation processes.

Initial pH Conditions Shape the Microbial Community Structure of Sewage Sludge in Batch Fermentations for the Improvement of Volatile Fatty Acid Production

Conversion of wastewater treatment plants into biorefineries is a sustainable alternative for obtaining valuable compounds, thus reducing pollutants and costs and protecting the environment and human health. Under specific operating conditions, microbial fermentative products of sewage sludge are volatile fatty acids (VFA) that can be precursors of polyhydroxyalkanoate thermoplastic polyesters. The role of various operating parameters in VFA production has yet to be elucidated. This study aimed to correlate the levels of VFA yields with prokaryotic microbiota structures of sewage sludge in two sets of batch fermentations with an initial pH of 8 and 10. The sewage sludge used to inoculate the batch fermentations was collected from a Sicilian WWTP located in Marineo (Italy) as a case study. Gas chromatography analysis revealed that initial pH 10 stimulated chemical oxygen demands (sCOD) and VFA yields (2020 mg COD/L) in comparison with initial pH 8. Characterization of the sewage sludge prokaryotic community structures—analyzed by next-generation sequencing of 16S rRNA gene amplicons—demonstrated that the improved yield of VFA paralleled the increased abundance of fermenting bacteria belonging to Proteobacteria, Bacteroidetes, Chloroflexi, and Firmicutes phyla and, conversely, the reduced abundance of VFA-degrading strains, such as archaeal methanogens.

Intensification and biorefinery approaches for the valorization of kitchen wastes - A review

Kitchen wastes (KW) are post-consumption residues from household and food service sector, heterogenous in composition and highly variable depending on the particular origin, which are often treated as municipal. There is a need to improve the management of these continuously produced and worldwidely available resources and their valorization into novel and commercially interesting products will aid in the development of bioeconomy. The successful implementation of such approach requires cooperation between academia, industrial stakeholders, public and private institutions, based on the different dimensions, including social, economic, ecologic and technological involved. This review aims at presenting a survey of technological aspects, regarding current and potential management strategies of KW, following either a single or multiproduct processing according to the biorefineries scheme. Emphasis is given to intensification tools, designed to enhance process efficiency.

Production of Volatile Fatty Acids in a Semi-Continuous Dark Fermentation of Kitchen Waste: Impact of Organic Loading Rate and Hydraulic Retention Time

The aim of the study was to evaluate the possibility of using the process of dark fermentation to convert kitchen waste into valuable volatile fatty acids in a semi-continuous process at different values of the organic loading rate (2.5 and 5.0 gVS/(L × d)) and hydraulic retention time (5 and 10 d) using anaerobic mixed microbial consortia. The experiments were performed in a bioreactor of working volume 8L with pH control. The maximum volatile fatty acids yield in a steady state (22.3 g/L) was achieved at the organic loading rate of 5.0 gVS/(L × d) and HRT of 10 days. The main products of dark fermentation were acetic and butyric acids, constituting, respectively, 35.2–47.7% and 24.1–30.0% of all identified volatile fatty acids. Additionally, at the beginning of the fermentation and in a steady-state condition, the microbial population analysis (16S rDNA) of the fermentation mixture with the most effective volatile fatty acids generation has been performed to monitor the DF microflora development. The dominant microorganisms at a phylum level in a steady state were Firmicutes (44.9%) and Bacteroidetes (30.1%), which indicate the main role of those phyla in the volatile fatty acids synthesis.