Analyses of Crossbreeding Parameters for Juvenile Body Weight in Broiler Chicken

Evaluation of reciprocal F1 crosses of Fayoumi with two exotic chicken breeds 1: additive and non-additive effects on egg production traits

The present study estimates additive and non-additive effects on egg production traits in genotypes generated through pure mating and reciprocal crossing of Fayoumi (FM) with Koekoek (KK) and White Leghorn (WL). Age at first egg (AFE) and body weight at first egg (BWAFE) were determined when the first bird in the pen laid its first egg, and egg weight at first egg (EWAFE) was the average weight of eggs laid consecutively during the first 10 days. Egg number (EN) and egg weight (EW) were recorded daily from AFE to 40 weeks of age. Egg mass (EM) was the product of EN and EW. EN of hens initially housed and hens alive during the experiment were used to calculate hen-housed egg production (HHEP) and hen-day egg production (HDEP), respectively. All the traits showed statistically significant differences among the genotypes. The results revealed the importance of additive and non-additive effects, where purebred effect (PE), general combining ability (GCA), maternal effect (ME), specific combining ability (SCA), and residual reciprocal effect (RRE) significantly affected most of the traits. The KK and WL had a higher PE, and GCA was highest in KK, with FM and WL showing a higher ME. The FM x WL had higher SCA and RRE. The KK x FM and FM x WL outperformed their main and reciprocal crosses, respectively, and purebred contemporaries. Therefore, a synthetic breeding program involving KK as a sire and FM, WL, FM x WL, and KK x FM as a dam would be feasible.

Evaluation of reciprocal F1 crosses of Fayoumi with two exotic chicken breeds 2: additive and non-additive effects on egg quality traits

The current study evaluates additive and non-additive genetic variances for egg quality traits in six genotypes generated through pure mating and reciprocal crossing of Fayoumi (FM) with Koekoek (KK) and White Leghorn (WL). For each genotype, measurements were taken on 30 eggs randomly sampled at 32, 36, and 40 weeks of age to evaluate both external and internal egg quality parameters. The results revealed significant differences (P < 0.001) among the genotypes in all external quality traits and most internal quality traits, including yolk weight (YW), albumen weight (AW), and yolk height (YH). The results also showed that variations due to purebred effect (PE), general combining ability (GCA), maternal effect (ME), and specific combining ability (SCA) were significant in most traits, which reflects that both additive and non-additive variances are important for the inheritances of the parameters investigated. In most of the traits, the ME and PE were higher in KK and WL, while GCA was higher in KK and FM. The FM x WL had higher SCA than FM x KK. The results suggest the likelihood of genetic improvement in these genotypes through selection and crossbreeding strategies and/or a combination of the two.

Analysis of (co) variance components and estimation of breeding value of growth and production traits in Dahlem Red chicken using pedigree relationship in an animal model

Variance and covariance components of growth and production traits were analyzed employing REML animal model to assess the Dahlem Red (PD-3) chicken population for direct additive genetic, maternal effects and to estimate the estimated breeding value (EBV), genetic parameters, genetic trends and rate of inbreeding (ΔF) utilizing seven generation’s data. The generation and hatch had significant (P≤0.01) effect on the body weight at 0 day (BW0), 2 (BW2), 4 (BW4) and 6 weeks (BW6) and shank length at six weeks of age (SL6). The average least squares means (LSM) for BW6 and SL6 were 273.93±0.62 g and 53.97±0.05 mm, respectively. All the production traits were significantly (P≤0.01) influenced by generation and hatch. The average LSM for age at sexual maturity (ASM), egg production up to 40 weeks (EP40) and egg mass up to 40 weeks (EM40) were 168.82±0.25 d, 72.60±0.41 eggs and 4.21±0.07 kg, respectively. Model 5 with additive direct, maternal genetic, maternal permanent environmental and residual variance components was the best for BW0, BW2 and BW4 based on the AIC values obtained in WOMBAT. Model 4 was the best model for BW6, SL6, ASM, EP40 and EM40 with additive direct, maternal permanent environmental and residual variance components. Maternal effects were higher during early age, decreased with age, and remained present until 20 weeks of age. The heritability (h²) estimates were low to moderate in magnitude for all the growth traits and ranged from 0.02±0.03 to 0.19±0.03. The maternal heritability was high at hatch (0.35±0.06), decreased gradually until 4^th week (0.02±0.01) and ceased afterwards. The heritabilities of EP40 (0.11±0.03) and EM40 (0.12±0.04) were low. The direct additive genetic correlations (r_a) between BW2, BW4, BW6 and SL6 were high and positive (P≤ 0.05). The additive genetic and maternal permanent environmental correlation between EP40 and EM40 were high and positive (P≤ 0.05). The EBV of EM40 was significant (P≤ 0.05) with 0.48 kg/generation in PD-3 chicken at the end of the seventh generation. The EBV of EP40 showed an increasing trend with a genetic gain of 1.87 eggs per generation. The average inbreeding coefficient of the population was 0.019 and average ΔF was 0.007 over the last seven generations of selection. The EBV trends for primary and associated traits showed linear trends in the desired direction and negligible inbreeding.

Estimation of breeding value, genetic parameters and maternal effects of economic traits in rural male parent line chicken using pedigree relationships in an animal model

Breeding value (BV), genetic parameters and additive genetic, and maternal effects were evaluated on growth and production traits utilizing data from eight generations employing animal model in a rural male parent line (PD-6) chicken at ICAR-Directorate of Poultry Research, Hyderabad, India. The least squares means (LSM) for body weight (BW) and shank length (SL) up to 6 weeks of age varied significantly (p ≤ .01) among the generations and hatches. BW increased significantly (p ≤ .01) over the generations and decreased with the hatches. Sex also had a significant effect on BW and shank length except for BW at 0 day (BW0). LSM for BW (BW6) and Shank length (SL6) at 6 weeks of age were 598.84 ± 0.79 g and 74.57 ± 0.04 mm, respectively. Males recorded significantly (p ≤ .01) higher BWs and shank length. All the production traits were significantly (p ≤ .01) influenced by the generation effect. The overall LSM for age at sexual maturity (ASM), egg production at 40 weeks (EP40) and egg weight at 40 weeks (EW40) were 164.93 ± 0.23 days, 74.66 ± 0.40 eggs and 54.79 ± 0.08 g, respectively. Model 3 with additive, maternal permanent environmental and residual effects was the appropriate model for BW2, BW4, BW6, SL4 and SL6, whereas Model 4 with maternal effects was the best for BW0. The heritability estimates for BW6 and SL6 were 0.22 ± 0.02 and 0.18 ± 0.02, respectively. Model 1 with additive direct and residual effects was the best appropriate model for all the production traits. The heritability estimates of EP40 and EW40 were 0.16 ± 0.04 and 0.34 ± 0.05, respectively. BW and shank length were highly correlated with significant (p ≤ .05) positive association from different components. The correlation coefficient from direct additive component between egg production and BW40 was negative, while it was positive with less magnitude between egg production and BW20. The egg production and egg weights had a negative association at different ages. BV of SL6, the primary trait of selection, was significant (p ≤ .05) across the generations and increased linearly with an average genetic gain of 1.05 mm per generation. BV of BW6 was also significant (p ≤ .05) and increased linearly as correlated response with an average genetic response of 22.34 g per generation. BV of EP40 showed an increasing trend with a genetic gain of 0.02 eggs per generation. The EW 40 also increased linearly with an average genetic gain of 0.06 g. The average inbreeding coefficient of the population was 0.015. The study concluded that the population was in ideal status with a linearly increasing trend of average BV with negligible inbreeding over the eight generations of selection.

Genetic analysis of growth and egg production traits in synthetic colored broiler female line using animal model

Variance and genetic parameters were estimated for growth and production traits of synthetic broiler female line (PB-2) using REML animal model to delineate the population status, direct additive, maternal genetic, permanent environmental effects, besides genetic trends and performance of economic traits. The overall least squares mean (LSM) for body weights at 0 day (BW0), at 2 weeks (BW2), at 4 weeks (BW4), at 5 weeks (BW5), shank length at 5 weeks (SL5), and breast angle at 5 weeks (BA5) of age were 40.03 g, 207.40 g, 589.58 g, 828.51 g, 76.89 cm, and 80.78°, respectively. The overall LSM for egg production up to 40 weeks of age (EP40) and egg weight at 40 weeks (EW40) were 66.02 eggs and 58.23 g, respectively. The heritability estimates using the best model for BW0, BW2, BW4, BW5, SL5, and BA5 were 0.06 ± 0.03, 0.19 ± 0.03, 0.15 ± 0.03, 0.14 ± 0.02, 0.08 ± 0.02, and 0.02 ± 0.01, respectively. The heritability estimates were low to moderate in the magnitude for all early growth traits. The heritability estimate for egg production up to 40 weeks (EP40) was 0.30 ± 0.05. The heritability estimates for adult body weights at 20 and 40 weeks of age (BW 20 and BW 40), age at sexual maturity (ASM), and egg weight at 40 weeks (EW40) were 0.21 ± 0.04, 0.19 ± 0.04, 0.16 ± 0.03, and 0.33 ± 0.05, respectively, and the estimates were moderate to high in magnitude. Model 4 with additive, maternal permanent environmental, residual, and phenotypic effects was the best model for growth traits except for BW0 and BA5. The average genetic gain observed in primary trait (BW5) over the five generations was 13.62 g per each generation indicating effective selection. The animal model minimized the overestimation of genetic parameters and improved the accuracy of the BV, thus enabling the breeder to select the suitable breeding strategy for genetic improvement.

Variance component analysis of growth and production traits in Vanaraja male line chickens using animal model

Objective

A comprehensive study was conducted to study the effects of partition of variance on accuracy of genetic parameters and genetic trends of economic traits in Vanaraja male line/project directorate-1 (PD-1) chicken.

Methods

Variance component analysis utilizing restricted maximum likelihood animal model was carried out with five generations data to delineate the population status, direct additive, maternal genetic, permanent environmental effects, besides genetic trends and performance of economic traits in PD-1 chickens. Genetic trend was estimated by regression of the estimated average breeding values (BV) on generations.

Results

The body weight (BW) and shank length (SL) varied significantly (p≤0.01) among the generations, hatches and sexes. The least squares mean of SL at six weeks, the primary trait was 77.44±0.05 mm. All the production traits, viz., BWs, age at sexual maturity, egg production (EP) and egg weight were significantly influenced by generation. Model four with additive, maternal permanent environmental and residual effects was the best model for juvenile growth traits, except for zero-day BW. The heritability estimates for BW and SL at six weeks (SL6) were 0.20±0.03 and 0.17±0.03, respectively. The BV of SL6 in the population increased linearly from 0.03 to 3.62 mm due to selection. Genetic trend was significant (p≤0.05) for SL6, BW6, and production traits. The average genetic gain of EP40 for each generation was significant (p≤0.05) with an average increase of 0.38 eggs per generation. The average inbreeding coefficient was 0.02 in PD-1 line.

Conclusion

The population was in ideal condition with negligible inbreeding and the selection was quite effective with significant genetic gains in each generation for primary trait of selection. The animal model minimized the over-estimation of genetic parameters and improved the accuracy of the BV, thus enabling the breeder to select the suitable breeding strategy for genetic improvement.

Genetic analysis of juvenile growth and carcass traits in a full diallel mating in selected colored broiler lines

The juvenile growth and carcass traits were evaluated in a 4 × 4 full diallel crossing involving four colored broiler chicken lines viz., Naked neck (NN), Dwarf, Punjab Broiler-1 (PB-1), and Punjab Broiler-2 to study the performance and crossbreeding parameters. The data on 2,280 chicks were analyzed using least squares techniques to assess the effect of genetic group, and the significant traits were further analyzed for crossbreeding parameters. Genetic group had significant influence on the body weights and carcass traits. The cross of PB-1 × NN recorded significantly (p ≤ 0.05) higher body weight at 6 weeks of age. The data revealed that general combining ability (GCA), specific combining ability (SCA), maternal ability (MA), sex-linked effect (SE), and purebred effects significantly influenced the growth and carcass traits in the broiler crosses. The crossbred PB-1 × NN showed positive heterosis for growth as well as carcass traits. The results suggest that GCA, SCA, SE, and MA are important in the inheritance of the body weights and carcass traits indicating the presence of both additive and nonadditive genetic variation along with reciprocal effects. Therefore, pure line selection along with development of specialized sire and dam lines followed by crossing will improve the growth performance and benefit the poultry farmers. It is concluded that PB-1 as a male line and NN as a female line performed significantly higher, therefore, may be used for improving the performance of colored broilers.

Production benefits of the crossbreeding of indigenous and non-indigenous ducks--growing and laying period body weight and production performance

To evaluate different crosses and purebreds ducks in respect to various economic traits and to estimate different crossbreeding genetic parameters, a 3 x 3 complete diallel cross involving indigenous duck (DD), Khaki Campbell (KK) and White Pekin (WW) were used to produce three purebreds (DD, KK, WW) three crossbreds (DK, DW, KW) and three reciprocals (KD, WD, WK). A total of 609 ducklings produced were reared on deep litter and the females (316 in number) were evaluated for growing and laying period body weight along with the production performance traits. Different crossbreeding genetic parameters were estimated for different traits. All the traits in respect to body weight gain during growing and laying period and different production traits including laying house mortality rate showed significant (p <or= 0.05) difference between different genetic groups. In general, crossbreds perform better than the purebreds for most of the traits studied. General combining ability (GCA), specific combining ability (SCA) and reciprocal effect (RE) were significant (p <or= 0.01) for body weight and production traits. Egg weight showed significant (p <or= 0.01) difference in respect to GCA, SCA and RE for all the ages of measurement except RE for 30th week egg weight. Laying period mortality rate was only significant (p <or= 0.05) for SCA. Most of the crossbreds recorded heterosis rate in desirable direction for majority of the traits. Overall results revealed that the crossbreds perform well in respect to different traits than the purebreds and may be used to take advantage of heterosis. DW performs well in respect to majority of the traits measured and is of importance for commercial exploitation. Further, pure line selection with development of specialised sire and dam line followed by crossing may be of importance to enhance the performances in the crosses.