Estimation of models for cumulative infiltration of soil using machine learning methods

Fuzzy logic control for watering system

A two-dimensional finite element (FEM) model was developed to simulate water propagation in soil during irrigation. The first dimension was water distribution depth in soil, and the second dimension was time. The developed model was tested by analyzing water distribution in a conventional (clock-controlled) irrigation model. The values in the conventional model were calculated based on the literature. The results were consistent with the results obtained from the model. In the next step, a fuzzy logic model for irrigation control was developed. The input variables were ambient temperature, soil moisture content and time of day (which is related to solar radiation and evapotranspiration), and the output variable was irrigation intensity. The fuzzy logic control (FLC) model was tested by simulating water distribution in soil and comparing water consumption in both models. The study demonstrated that the depth of the soil moisture sensor affected water use in the fuzzy logic-controlled irrigation system relative to the conventional model. Water consumption was reduced by around 12% when the soil moisture sensor was positioned at an optimal depth, but it increased by around 20% when sensor depth was not optimal. The extent to which the distribution of fuzzy variables affects irrigation performance was examined, and the analysis revealed that inadequate distribution of fuzzy variables in the irrigation control system can increase total water consumption by up to 38% relative to the conventional model. It can be concluded that a fuzzy logic-controlled irrigation system can reduce water consumption, but the system's operating parameters should be always selected based on an analysis of local conditions to avoid an unintended increase in water use. A well-designed FLC can decrease water use in agriculture (thus contributing to rational management of scarce water resources), decrease energy consumption, and reduce the risk of crop pollution with contaminated groundwater.

Pre- and post-dam river water temperature alteration prediction using advanced machine learning models

Dams significantly impact river hydrology by changing the timing, size, and frequency of low and high flows, resulting in a hydrologic regime that differs significantly from the natural flow regime before the impoundment. For precise planning and judicious use of available water resources for agricultural operations and aquatic habitats, it is critical to assess the dam water's temperature accurately. The building of dams, particularly several dams in rivers, can significantly impact downstream water. In this study, we predict the daily water temperature of the Yangtze River at Cuntan. Thus, this work reveals the potential of machine learning models, namely, M5 Pruned (M5P), Random Forest (RF), Random Subspace (RSS), and Reduced Error Pruning Tree (REPTree). The best and effective input variables combinations were determined based on the correlation coefficient. The outputs of the various machine learning algorithm models were compared with recorded daily water temperature data using goodness-of-fit criteria and graphical analysis to arrive at a final comparison. Based on a number of criteria, numerical comparison between the models revealed that M5P model performed superior (R² = 0.9920, 0.9708; PCC = 0.9960, 0.9853; MAE = 0.2387, 0.4285; RMSE = 0.3449, 0.4285; RAE = 6.2573, 11.5439; RRSE = 8.0288, 13.8282) in pre-impact and post-impact spam, respectively. These findings suggest that a huge wave of dam construction in the previous century altered the hydrologic regimes of large and minor rivers. This study will be helpful for the ecologists and river experts in planning new reservoirs to maintain the flows and minimize the water temperature concerning spillway operation. Finally, our findings revealed that these algorithms could reliably estimate water temperature using a day lag time input in water level. They are cost-effective techniques for forecasting purposes.

Hybrid Machine Learning Models for Soil Saturated Conductivity Prediction

The hydraulic conductivity of saturated soil is a crucial parameter in the study of any engineering problem concerning groundwater. Hydraulic conductivity mainly depends on particle size distribution, soil compaction, and properties that influence aggregation and water retention. Generally, finding simple and accurate analytical equations between the hydraulic conductivity of soil and the characteristics on which it depends is a very hard task. Machine learning algorithms can provide excellent tools for tackling highly nonlinear regression problems. Additionally, hybrid models resulting from the combination of multiple machine learning algorithms can further improve the accuracy of predictions. Five different models were built to predict saturated hydraulic conductivity using a dataset extracted from the Soil Water Infiltration Global database. The models were based on different predictors. Seven variants of each model were compared, replacing the implemented algorithm. Three variants were based on individual models, while four variants were based on hybrid models. The employed individual machine learning algorithms were Multilayer Perceptron, Random Forest, and Support Vector Regression. The model based on the largest number of predictors led to the most accurate predictions. In addition, across all models, hybrid variants based on all three algorithms and hybridized variants of Random Forest and Support Vector Regression proved to be the most accurate (R2 values up to 0.829). However, all variants showed a tendency to overestimate conductivity in soils where it is very low.

Rain garden infiltration rate modeling using gradient boosting machine and deep learning techniques

Rain garden is effective in reducing storm water runoff, whose efficiency depends upon several parameters such as soil type, vegetation and meteorological factors. Evaluation of rain gardens has been done by various researchers. However, knowledge for sound design of rain gardens is still very limited, particularly the accurate modeling of infiltration rate and how much it differs from infiltration of natural ground surface. The present study uses experimentally observed infiltration rate of rain gardens with different types of vegetation (grass, candytuft, marigold and daisy with different plant densities) and flow conditions. After that, modeling has been done by the popular infiltration model i.e. Philip's model (which is valid for natural ground surface) and soft computing tools viz. Gradient Boosting Machine (GBM) and Deep Learning (DL). Results suggest a promising performance (in terms of CC, RMSE, MAE, MSE and NSE) by GBM and DL in comparison to the relation proposed by Philip's model (1957). Most of the values predicted by both GBM and DL are within scatter limits of ±5%, whereas the values by Philips model are within the range of ±25% error lines and even outside. GBM performs better than DL as the values of the correlation coefficients and Nash-Sutcliffe model efficiency (NSE) coefficient are the highest and the root mean square error is the lowest. The results of the study will be useful in selection of plant type and its density in the rain garden of the urban area.

Machine learning algorithm-based risk assessment of riparian wetlands in Padma River Basin of Northwest Bangladesh

Wetland risk assessment is a global concern especially in developing countries like Bangladesh. The present study explored the spatiotemporal dynamics of wetlands, prediction of wetland risk assessment. The wetland risk assessment was predicted based on ten selected parameters, such as fragmentation probability, distance to road, and settlement. We used M5P, random forest (RF), reduced error pruning tree (REPTree), and support vector machine (SVM) machine learning techniques for wetland risk assessment. The results showed that wetland areas at present are declining less than one-third of those in 1988 due to the construction of the dam at Farakka, which is situated at the upstream of the Padma River. The distance to the river and built-up area are the two most contributing drivers influencing the wetland risk assessment based on information gain ratio (InGR). The prediction results of machine learning models showed 64.48% of area by M5P, 61.75% of area by RF, 62.18% of area by REPTree, and 55.74% of area by SVM have been predicted as the high and very high-risk zones. The results of accuracy assessment showed that the RF outperformed than other models (area under curve: 0.83), followed by the SVM, M5P, and REPTree. Degradation of wetlands explored in this study demonstrated the negative effects on biodiversity. Therefore, to conserve and protect the wetlands, continuous monitoring of wetlands using high resolution satellite images, feeding with the ecological flow, confining built up area and agricultural expansion towards wetlands, and new wetland creation is essential for wetland management.

Machine Learning in Agriculture: A Comprehensive Updated Review

The digital transformation of agriculture has evolved various aspects of management into artificial intelligent systems for the sake of making value from the ever-increasing data originated from numerous sources. A subset of artificial intelligence, namely machine learning, has a considerable potential to handle numerous challenges in the establishment of knowledge-based farming systems. The present study aims at shedding light on machine learning in agriculture by thoroughly reviewing the recent scholarly literature based on keywords' combinations of "machine learning" along with "crop management", "water management", "soil management", and "livestock management", and in accordance with PRISMA guidelines. Only journal papers were considered eligible that were published within 2018-2020. The results indicated that this topic pertains to different disciplines that favour convergence research at the international level. Furthermore, crop management was observed to be at the centre of attention. A plethora of machine learning algorithms were used, with those belonging to Artificial Neural Networks being more efficient. In addition, maize and wheat as well as cattle and sheep were the most investigated crops and animals, respectively. Finally, a variety of sensors, attached on satellites and unmanned ground and aerial vehicles, have been utilized as a means of getting reliable input data for the data analyses. It is anticipated that this study will constitute a beneficial guide to all stakeholders towards enhancing awareness of the potential advantages of using machine learning in agriculture and contributing to a more systematic research on this topic.

Using Machine Learning-Based Algorithms to Analyze Erosion Rates of a Watershed in Northern Taiwan

This study continues a previous study with further analysis of watershed-scale erosion pin measurements. Three machine learning (ML) algorithms—Support Vector Machine (SVM), Adaptive Neuro-Fuzzy Inference System (ANFIS), and Artificial Neural Network (ANN)—were used to analyze depth of erosion of a watershed (Shihmen reservoir) in northern Taiwan. In addition to three previously used statistical indexes (Mean Absolute Error, Root Mean Square of Error, and R-squared), Nash–Sutcliffe Efficiency (NSE) was calculated to compare the predictive performances of the three models. To see if there was a statistical difference between the three models, the Wilcoxon signed-rank test was used. The research utilized 14 environmental attributes as the input predictors of the ML algorithms. They are distance to river, distance to road, type of slope, sub-watershed, slope direction, elevation, slope class, rainfall, epoch, lithology, and the amount of organic content, clay, sand, and silt in the soil. Additionally, measurements of a total of 550 erosion pins installed on 55 slopes were used as the target variable of the model prediction. The dataset was divided into a training set (70%) and a testing set (30%) using the stratified random sampling with sub-watershed as the stratification variable. The results showed that the ANFIS model outperforms the other two algorithms in predicting the erosion rates of the study area. The average RMSE of the test data is 2.05 mm/yr for ANFIS, compared to 2.36 mm/yr and 2.61 mm/yr for ANN and SVM, respectively. Finally, the results of this study (ANN, ANFIS, and SVM) were compared with the previous study (Random Forest, Decision Tree, and multiple regression). It was found that Random Forest remains the best predictive model, and ANFIS is the second-best among the six ML algorithms.