Improvement of PVC/α-MnO2–LVA nanocomposites properties: A promising adsorbent for Pb(II) uptake

PVC/EVA-based polymer inclusion membranes with improved stability and Cr(VI) extraction capacity: Water plasticization effect

Polymer inclusion membranes (PIMs) are far investigated for their ability to extract heavy metals and small organic compounds from aqueous media. Polyvinyl chloride (PVC) is one of the most widely used base polymers for the PIM elaboration. However, its use requires the incorporation of a relatively expensive liquid plasticizer. In the present work, poly(ethylene-co-vinyl acetate) (EVA) serves as a polymer plasticizer for the elaboration of PIMs based on PVC as a base polymer and Aliquat 336 as a carrier. The composition of PIMs was optimized in terms of the PVC/EVA ratio and the vinyl acetate (VA) groups content (x) of EVA (i.e. EVA_x). Physical-chemical properties of the resulting membranes are analyzed and correlated with their structure. The results of SEM analysis revealed miscible PVC/EVA₇₀ blends (i.e. with 70 wt% of VA groups) and partially miscible PVC/EVA₄₀ blends. The plasticizing effect of the EVA copolymer was confirmed by the tensile test results. The results of transport measurements showed that PIMs containing EVA₄₀ and PVC are more efficient for the Cr(VI) extraction than those with only PVC. Thus, EVA₄₀ can effectively replace the conventional liquid plasticizers while improving the Cr(VI) permeability. Besides, it is stated that EVA₄₀-based PIMs are more stable as compared with conventional PIMs due to the water plasticizing effect. After the membrane optimization, the highest Cr(VI) transport flux (54.7 µmol·m^-2·s^-1) was measured. Moreover, the addition of 10 wt% of tetradecanol causes the increase of the water plasticizing effect and allows obtaining a PIM with high stability (up to 24 cycles) required for the membrane long-term operation.

Design and identification of poly(vinyl chloride)/layered double hydroxide@MnO2 nanocomposite films and evaluation of the methyl orange uptake: linear and non-linear isotherm and kinetic adsorption models

In this work, an adsorbent based on poly(vinyl chloride) (PVC) for the removal of methyl orange (MO) dye is proposed.