Fructansucrase enzymes and sucrose analogues: A new approach for the synthesis of unique fructo-oligosaccharides

Sequence determinants of nucleotide binding in Sucrose Synthase: improving the affinity of a bacterial Sucrose Synthase for UDP by introducing plant residues

Sucrose Synthase (SuSy) catalyzes the reversible conversion of sucrose and a nucleoside diphosphate (NDP) into NDP-glucose and fructose. Biochemical characterization of several plant and bacterial SuSys has revealed that the eukaryotic enzymes preferentially use UDP whereas prokaryotic SuSys prefer ADP as acceptor. In this study, SuSy from the bacterium Acidithiobacillus caldus, which has a higher affinity for ADP as reflected by the 25-fold lower Km value compared to UDP, was used as a test case to scrutinize the effect of introducing plant residues at positions in a putative nucleotide binding motif surrounding the nucleobase ring of NDP. All eight single to sextuple mutants had similar activities as the wild-type enzyme but significantly reduced Km values for UDP (up to 60 times). In addition, we recognized that substrate inhibition by UDP is introduced by a methionine at position 637. The affinity for ADP also increased for all but one variant, although the improvement was much smaller compared to UDP. Further characterization of a double mutant also revealed more than 2-fold reduction in Km values for CDP and GDP. This demonstrates the general impact of the motif on nucleotide binding. Furthermore, this research also led to the establishment of a bacterial SuSy variant that is suitable for the recycling of UDP during glycosylation reactions. The latter was successfully demonstrated by combining this variant with a glycosyltransferase in a one-pot reaction for the production of the C-glucoside nothofagin, a health-promoting flavonoid naturally found in rooibos (tea).

Sucrose synthase: A unique glycosyltransferase for biocatalytic glycosylation process development

Sucrose synthase (SuSy, EC 2.4.1.13) is a glycosyltransferase (GT) long known from plants and more recently discovered in bacteria. The enzyme catalyzes the reversible transfer of a glucosyl moiety between fructose and a nucleoside diphosphate (NDP) (sucrose+NDP↔NDP-glucose+fructose). The equilibrium for sucrose conversion is pH dependent, and pH values between 5.5 and 7.5 promote NDP-glucose formation. The conversion of a bulk chemical to high-priced NDP-glucose in a one-step reaction provides the key aspect for industrial interest. NDP-sugars are important as such and as key intermediates for glycosylation reactions by highly selective Leloir GTs. SuSy has gained renewed interest as industrially attractive biocatalyst, due to substantial scientific progresses achieved in the last few years. These include biochemical characterization of bacterial SuSys, overproduction of recombinant SuSys, structural information useful for design of tailor-made catalysts, and development of one-pot SuSy-GT cascade reactions for production of several relevant glycosides. These advances could pave the way for the application of Leloir GTs to be used in cost-effective processes. This review provides a framework for application requirements, focusing on catalytic properties, heterologous enzyme production and reaction engineering. The potential of SuSy biocatalysis will be presented based on various biotechnological applications: NDP-sugar synthesis; sucrose analog synthesis; glycoside synthesis by SuSy-GT cascade reactions.

Extending synthetic routes for oligosaccharides by enzyme, substrate and reaction engineering

The integration of all relevant tools for bioreaction engineering has been a recent challenge. This approach should notably favor the production of oligo- and polysaccharides, which is highly complex due to the requirements of regio- and stereoselectivity. Oligosaccharides (OS) and polysaccharides (PS) have found many interests in the fields of food, pharmaceuticals, and cosmetics due to different specific properties. Food, sweeteners, and food ingredients represent important sectors where OS are used in major amounts. Increasing attention has been devoted to the sophisticated roles of OS and glycosylated compounds, at cell or membrane surfaces, and their function, e.g., in infection and cancer proliferation. The challenge for synthesis is obvious, and convenient approaches using cheap and readily available substrates and enzymes will be discussed. We report on new routes for the synthesis of oligosaccharides (OS), with emphasis on enzymatic reactions, since they offer unique properties, proceeding highly regio- and stereoselective in water solution, and providing for high yields in general.

Enzymatic synthesis and characterization of fructooligosaccharides and novel maltosylfructosides by inulosucrase from Lactobacillus gasseri DSM 20604

The ability of an inulosucrase (IS) from Lactobacillus gasseri DSM 20604 to synthesize fructooligosaccharides (FOS) and maltosylfructosides (MFOS) in the presence of sucrose and sucrose-maltose mixtures was investigated after optimization of synthesis conditions, including enzyme concentration, temperature, pH, and reaction time. The maximum formation of FOS, which consist of β-2,1-linked fructose to sucrose, was 45% (in weight with respect to the initial amount of sucrose) and was obtained after 24 h of reaction at 55°C in the presence of sucrose (300 g liter(-1)) and 1.6 U ml(-1) of IS-25 mM sodium acetate buffer-1 mM CaCl2 (pH 5.2). The production of MFOS was also studied as a function of the initial ratios of sucrose to maltose (10:50, 20:40, 30:30, and 40:20, expressed in g 100 ml(-1)). The highest yield in total MFOS was attained after 24 to 32 h of reaction time and ranged from 13% (10:50 sucrose/maltose) to 52% (30:30 sucrose/maltose) in weight with respect to the initial amount of maltose. Nuclear magnetic resonance (NMR) structural characterization indicated that IS from L. gasseri specifically transferred fructose moieties of sucrose to either C-1 of the reducing end or C-6 of the nonreducing end of maltose. Thus, the trisaccharide erlose [α-d-glucopyranosyl-(1→4)-α-d-glucopyranosyl-(1→2)-β-d-fructofuranoside] was the main synthesized MFOS followed by neo-erlose [β-d-fructofuranosyl-(2→6)-α-d-glucopyranosyl-(1→4)-α-d-glucopyranose]. The formation of MFOS with a higher degree of polymerization was also demonstrated by the transfer of additional fructose residues to C-1 of either the β-2,1-linked fructose or the β-2,6-linked fructose to maltose, revealing the capacity of MFOS to serve as acceptors.

Cloning, expression, purification, crystallization and preliminary X-ray analysis of EaLsc, a levansucrase from Erwinia amylovora

The Gram-negative bacterium Erwinia amylovora is a destructive pathogen of Rosaceae. During infection, E. amylovora produces the exopolysaccharide levan, which contributes to the occlusion of plant vessels, causing the wilting of shoots. Levan is a fructose polymer that is synthesized by multifunctional enzymes called levansucrases. The levansucrase from E. amylovora (EaLsc) was heterologously expressed as a GST-fusion protein in Escherichia coli, purified and crystallized after tag removal. The protein crystallized in space group P21212. X-ray diffraction data were acquired to 2.77 Å resolution. The structure of the enzyme was solved by molecular replacement. The asymmetric unit contains eight enzyme molecules, giving a solvent content of 58.74% and a Matthews coefficient of 2.98 Å(3) Da(-1).

Enzymatic glycosylation of small molecules: challenging substrates require tailored catalysts

Glycosylation can significantly improve the physicochemical and biological properties of small molecules like vitamins, antibiotics, flavors, and fragrances. The chemical synthesis of glycosides is, however, far from trivial and involves multistep routes that generate lots of waste. In this review, biocatalytic alternatives are presented that offer both stricter specificities and higher yields. The advantages and disadvantages of different enzyme classes are discussed and illustrated with a number of recent examples. Progress in the field of enzyme engineering and screening are expected to result in new applications of biocatalytic glycosylation reactions in various industrial sectors.

Glucansucrases: three-dimensional structures, reactions, mechanism, α-glucan analysis and their implications in biotechnology and food applications

Glucansucrases are extracellular enzymes that synthesize a wide variety of α-glucan polymers and oligosaccharides, such as dextran. These carbohydrates have found numerous applications in food and health industries, and can be used as pure compounds or even be produced in situ by generally regarded as safe (GRAS) lactic acid bacteria in food applications. Research in the recent years has resulted in big steps forward in the understanding and exploitation of the biocatalytic potential of glucansucrases. This paper provides an overview of glucansucrase enzymes, their recently elucidated crystal structures, their reaction and product specificity, and the structural analysis and applications of α-glucan polymers. Furthermore, we discuss key developments in the understanding of α-glucan polymer formation based on the recently elucidated three-dimensional structures of glucansucrase proteins. Finally we discuss the (potential) applications of α-glucans produced by lactic acid bacteria in food and health related industries.

Crystal structure of inulosucrase from Lactobacillus: insights into the substrate specificity and product specificity of GH68 fructansucrases

Fructansucrases (FSs) catalyze a transfructosylation reaction with sucrose as substrate to produce fructo-oligosaccharides and fructan polymers that contain either β-2,1 glycosidic linkages (inulin) or β-2,6 linkages (levan). Levan-synthesizing FSs (levansucrases) have been most extensively investigated, while detailed information on inulosucrases is limited. Importantly, the molecular basis of the different product specificities of levansucrases and inulosucrases is poorly understood. We have elucidated the three-dimensional structure of a truncated active bacterial GH68 inulosucrase, InuJ of Lactobacillus johnsonii NCC533 (residues 145-708), in its apo form, with a bound substrate (sucrose), and with a transfructosylation product. The sucrose binding pocket and the sucrose binding mode are virtually identical with those of GH68 levansucrases, confirming that both enzyme types use the same fully conserved structural framework for the binding and cleavage of the donor substrate sucrose in the active site. The binding mode of the first transfructosylation product 1-kestose (Fru-β(2-1)-Fru-α(2-1)-Glc, where Fru=fructose and Glc=glucose) in subsites -1 to +2 shows for the first time how inulin-type fructo-oligosaccharide bind in GH68 FS and how an inulin-type linkage can be formed. Surprisingly, observed interactions with the sugar in subsites +1 and +2 are provided by residues that are also present in levansucrases. The binding mode of 1-kestose and the presence of a more distant sucrose binding site suggest that residues beyond the +2 subsite, in particular residues from the nonconserved 1B-1C loop, determine product linkage type specificity in GH68 FSs.