Finite element comparison of performance related characteristics of balloon expandable stents

In Silico analysis of stent deployment- effect of stent design

Coronary artery disease (CAD) remains the leading cause of death in Europe and worldwide. One of the most common pathologic processes involved in CAD is atherosclerosis. Coronary stents are expandable scaffolds that are used to widen the occluded arteries and enable the blood flow restoration. To achieve an adequate delivery and placement of coronary stents different parameters play a significant role. Due to the strain that the stents are exposed to and the forces they should withstand, the stent design is dominant. This study focuses on investigating the effect of the stent design in two finite element models using two stents with difference in the strut thickness. The in silico deployment is performed in a reconstructed patient specific arterial segment. The results are analyzed in terms of stress in the stent and the arterial wall and demonstrate how stent expansion is extensively affected by the scaffold's design.

In-situ investigation of stress conditions during expansion of bare metal stents and PLLA-coated stents using the XRD sin(2)ψ-technique

Drug eluting stents (DES) consist of platform, coating and drug. The platform often is a balloon-expandable bare metal stent made of the CoCr alloy L-605 or stainless steel 316 L. The function of the coating, typically a permanent polymer, is to hold and release the drug, which should improve therapeutic outcome. Before implantation, DES are compressed (crimped) to allow implantation in the human body. During implantation, DES are expanded by balloon inflation. Crimping, as well as expansion, causes high stresses and high strains locally in the DES struts, as well as in the polymer coating. These stresses and strains are important design criteria of DES. Usually, they are calculated numerically by finite element analysis (FEA), but experimental results for validation are hardly available. In this work, the X-ray diffraction (XRD) sin(2)ψ-technique is applied to in-situ determination of stress conditions of bare metal L-605 stents, and Poly-(L-lactide) (PLLA) coated stents. This provides a realistic characterization of the near-surface stress state and a validation option of the numerical FEA. XRD-results from terminal stent struts of the bare metal stent show an increasing compressive load stress in tangential direction with increasing stent expansion. These findings correlate with numerical FEA results. The PLLA-coating also bears increasing compressive load stress during expansion.

The need for stent-lesion matching to optimize outcomes of intracoronary stent implantation

Intracoronary stents have markedly improved the outcomes of catheter-based coronary interventions. Intracoronary stent implantation rates of over 90% during coronary angioplasty are common. Stent implantations are associated with a small but statistically significant number of adverse outcomes including restenosis, thrombosis, strut malapposition, incomplete strut endothelialization, and various types of stenting failure. Better matching of biomechanical properties of stents and lesions could further improve the clinical outcome of intracoronary stenting. Thus, in this article, we assess the need for advanced intracoronary stent-lesion matching. We reviewed the data on biomechanics of coronary stents and lesions to develop knowledge-based rationale for optimum intracoronary stent selection. The available technical information on marketed intracoronary stents and the current understanding of the biomechanical properties of coronary lesions at rest and under stress are limited, preventing the development of knowledge-based rationale for optimum intracoronary stent selection at present. Development of knowledge-based selection of intracoronary stents requires standardization of mechanical stent testing, communication of the nonproprietary technical data on stents by the industry and dedicated research into procedural stent-lesion interactions.

Effects of through-hole drug reservoirs on key clinical attributes for drug-eluting depot stent

Atherosclerosis, a condition related to cholesterol build-up and thickening of the inner wall of the artery, narrows or occludes the artery lumen. The drug-eluting stent is a major breakthrough for the treatment of such coronary artery diseases. In recent years, another innovative variation of the drug-eluting stent with drug reservoirs has been introduced. It allows programmable drug delivery with spatial and temporal control and has several potential advantages over traditional drug-eluting stents. However, creating such reservoirs on the stent struts may weaken the stent scaffolding and compromise its mechanical integrity. In this paper, the effects of these micro-sized through-hole drug reservoirs on several key clinically relevant functional attributes of the depot stent were investigated. Finite element models were developed to predict the mechanical integrity of a balloon-expandable stent at various stages such as manufacturing and deployment, as well as the stent radial strength and fatigue life. Results show that (1) creating drug reservoirs on a stent could impact the stent fatigue resistance to some degree; (2) drug reservoirs on the stent crowns led to much greater loss in all key clinical attributes than reservoirs on other locations; (3) reservoir shape change resulted in little differences in all key clinical attributes; (4) for the same drug loading capacity, larger and fewer reservoirs yielded lower equivalent plastic strain and radial strength but higher fatigue safety factor; and (5) the proposed depot stent was proven to be a feasible design. Its total drug capacity could be tripled with acceptable marginal trade-off in key clinical attributes. These results can serve as the guidelines to help future stent designs to achieve the best combination of stent mechanical integrity and smart drug delivery in the future, thereby opening up a wide variety of new treatment potentials and opportunities.

Assessment of mechanical integrity for drug-eluting renal stent with micro-sized drug reservoirs

The drug-eluting stent (DES) has become the gold standard worldwide for the treatment of cardiovascular diseases. In recent years, an innovative variation of the DES with micro-sized drug reservoirs has been introduced. It allows programmable drug delivery with both spatial and temporal control and has several potential advantages over traditional DESs. However, creating such reservoirs on the stent struts may weaken the structure of the stent scaffolding and compromise its mechanical integrity. In this study, we propose to use this innovative stent concept in the renal indication for potential treatment of both renal artery stenosis (upstream) and its associated kidney diseases (downstream) at the same time. The effects of these micro-sized drug reservoirs on several key clinically relevant functional attributes of the drug-eluting renal stent were systematically and quantitatively investigated. Finite element models were developed to predict the mechanical integrity of a balloon-expandable stent at various stages. Results show that (1) creating drug reservoirs on a stent could impact the stent fatigue resistance to certain degrees; (2) drug reservoirs on the stent crowns lead to greater loss in all key stent attributes than reservoirs on either bar arms or connectors and (3) the proposed optimised depot stent was proven to be feasible and could triple drug capacity than the current DESs, with marginal trade-off in its key clinical attributes. These results can serve as the guidelines to help future stent designs to achieve the best combination of stent structural integrity and smart drug delivery in the future.

Finite element shape optimization for biodegradable magnesium alloy stents

Biodegradable magnesium alloy stents (MAS) are a promising solution for long-term adverse events caused by interactions between vessels and permanent stent platforms of drug eluting stents. However, the existing MAS showed severe lumen loss after a few months: too short degradation time may be the main reason for this drawback. In this study, a new design concept of MAS was proposed and a shape optimization method with finite element analysis was applied on two-dimensional (2D) stent models considering four different magnesium alloys: AZ80, AZ31, ZM21, and WE43. A morphing procedure was utilized to facilitate the optimization. Two experiments were carried out for a preliminary validation of the 2D models with good results. The optimized designs were compared to an existing MAS by means of three-dimensional finite element analysis. The results showed that the final optimized design with alloy WE43, compared to the existing MAS, has an increased strut width by approximately 48%, improved safety properties (decreased the maximum principal stress after recoil with tissue by 29%, and decreased the maximum principal strain during expansion by 14%) and improved scaffolding ability (increased by 24%). Accordingly, the degradation time can be expected to extend. The used methodology provides a convenient and practical way to develop novel MAS designs.