Influence of femoral stem geometry, material and extent of porous coating on bone ingrowth and atrophy in cementless total hip arthroplasty: an iterative finite element model

Prediction of bone ingrowth into a porous novel hip-stem: A finite element analysis integrated with mechanoregulatory algorithm

Bone ingrowth into a porous implant is necessary for its long-term fixation. Although attempts have been made to quantify the peri-implant bone growth using finite element (FE) analysis integrated with mechanoregulatory algorithms, bone ingrowth into a porous cellular hip stem has scarcely been investigated. Using a three-dimensional (3D) FE model and mechanobiology-based numerical framework, the objective of this study was to predict the spatial distribution of evolutionary bone ingrowth into an uncemented novel porous hip stem proposed earlier by the authors. A CT-based FE macromodel of the implant-bone structure was developed. The bone material properties were assigned based on CT grey value. Peak musculoskeletal loading conditions, corresponding to level walking and stair climbing, were applied. The geometry of the implant-bone macromodel was divided into multiple submodels. A suitable mapping framework was used to transfer maximum nodal displacements from the FE macromodel to the cut boundaries of the FE submodels. CT grey value-based bone materials properties were assigned to the submodels. Thereafter, the submodels were solved and simulations of bone ingrowth were carried out using mechanoregulatory principle. A gradual increase in the average Young's modulus, from 1200 to 1500 MPa, of the bone tissue layer was observed considering all the submodels. The distal submodel exhibited 82% of bone ingrowth, whereas the proximal submodel experienced 65% bone ingrowth. Equilibrium in the bone ingrowth process was achieved in 7 weeks postoperatively, with a notable amount of bone ingrowth that should lead to biological fixation of the novel hip stem.

3-D finite element model of the impaction of a press-fitted femoral stem under various biomechanical environments

BACKGROUND

Uncemented femoral stem insertion into the bone is achieved by applying successive impacts on an inserter tool called "ancillary". Impact analysis has shown to be a promising technique to monitor the implant insertion and to improve its primary stability.

METHOD

This study aims to provide a better understanding of the dynamic phenomena occurring between the hammer, the ancillary, the implant and the bone during femoral stem insertion, to validate the use of impact analyses for implant insertion monitoring. A dynamic 3-D finite element model of the femoral stem insertion via an impaction protocol is proposed. The influence of the trabecular bone Young's modulus (Et), the interference fit (IF), the friction coefficient at the bone-implant interface (μ) and the impact velocity (v0) on the implant insertion and on the impact force signal is evaluated.

RESULTS

For all configurations, a decrease of the time difference between the two first peaks of the impact force signal is observed throughout the femoral stem insertion, up to a threshold value of 0.23 ms. The number of impacts required to reach this value depends on Et, v0 and IF and varies between 3 and 8 for the set of parameters considered herein. The bone-implant contact ratio reached after ten impacts varies between 60% and 98%, increases as a function of v0 and decreases as a function of IF, μ and Et.

CONCLUSION

This study confirms the potential of an impact analyses-based method to monitor implant insertion and to retrieve bone-implant contact properties.

Influence of the biomechanical environment on the femoral stem insertion and vibrational behavior: a 3-D finite element study

The long-term success of cementless surgery strongly depends on the implant primary stability. The femoral stem initial fixation relies on multiple geometrical and material factors, but their influence on the biomechanical phenomena occurring during the implant insertion is still poorly understood, as they are difficult to quantify in vivo. The aim of the present study is to evaluate the relationship between the resonance frequencies of the bone-implant-ancillary system and the stability of the femoral stem under various biomechanical environments. The interference fit IF, the trabecular bone Young's modulus [Formula: see text] and the bone-implant contact friction coefficient [Formula: see text] are varied to investigate their influence on the implant insertion phenomena and on the system vibration behavior. The results exhibit for all the configurations, a nonlinear increase in the bone-implant contact throughout femoral stem insertion, until the proximal contact is reached. While the pull-out force increases with [Formula: see text], IF and [Formula: see text], the bone-implant contact ratio decreases, which shows that a compromise on the set of parameters could be found in order to achieve the largest bone-implant contact while maintaining sufficient pull-out force. The modal analysis on the range [2-7] kHz shows that the resonance frequencies of the bone-implant-ancillary system increase with the bone-implant contact ratio and the trabecular bone Young's modulus, with a sensitivity that varies over the modes. Both the pull-out forces and the vibration behavior are consistent with previous experimental studies. This study demonstrates the potential of using vibration methods to guide the surgeons for optimizing implant stability in various patients and surgical configurations.

Metaphyseal sleeves in revision total knee arthroplasties: Computational analysis of bone remodeling

BACKGROUND

Metaphyseal sleeves help maintain long term stability and reduce revision rate for aseptic loosening in total knee arthroplasty (TKA) revision. However, their performance regarding bone remodeling is still poorly known for the long term. This study aimed to investigate the impact of metaphyseal sleeves on the bone remodeling of the tibia.

METHODS

Five finite element models of a female tibia with different implant configurations (regarding stem length and metaphyseal sleeve application) were developed. Loading conditions included joint reaction force, muscle, and tibia-fibula loads from 6 instances of the gait cycle. The bone remodeling model applied was adapted to the subject under analysis by selecting the bone remodeling parameters that best replicated the bone density distribution of the tibia estimated from the CT data. Changes in bone density after TKA were evaluated in 8 regions of interest.

RESULTS

Global bone loss ranged from -31.16%, in 115 mm stemmed configurations, to -20.93%, in 75 mm stemmed configurations. Apart from the lateral and posterior regions in the proximal tibia, whose bone loss reduced and increased, respectively, due to the incorporation of a metaphyseal sleeve, changes in bone density were similar with and without a metaphyseal sleeve for each stem length.

CONCLUSION

The results suggest that bone remodeling of the tibia is not critically affected by the incorporation of metaphyseal sleeves. Considering that sleeves are believed to present a favorable clinical outcome in stability and osseointegration, reducing the revision rate for aseptic loosening, their advantages seem to outweigh their disadvantages regarding bone remodeling.

Bone Ingrowth Around an Uncemented Femoral Implant Using Mechanoregulatory Algorithm: A Multiscale Finite Element Analysis

The primary fixation and long-term stability of a cementless femoral implant depend on bone ingrowth within the porous coating. Although attempts were made to quantify the peri-implant bone ingrowth using the finite element (FE) analysis and mechanoregulatory principles, the tissue differentiation patterns on a porous-coated hip stem have scarcely been investigated. The objective of this study is to predict the spatial distribution of evolutionary bone ingrowth around an uncemented hip stem, using a three-dimensional (3D) multiscale mechanobiology-based numerical framework. Multiple load cases representing a variety of daily living activities, including walking, stair climbing, sitting down, and standing up from a chair, were used as applied loading conditions. The study accounted for the local variations in host bone material properties and implant-bone relative displacements of the macroscale implanted FE model, in order to predict bone ingrowth in microscale representative volume elements (RVEs) of 12 interfacial regions. In majority RVEs, 20-70% bone tissue (immature and mature) was predicted after 2 months, contributing toward a progressive increase in average Young's modulus (1200-3000 MPa) of the interbead tissue layer. Higher bone ingrowth (mostly greater than 60%) was predicted in the anterolateral regions of the implant, as compared to the posteromedial side (20-50%). New bone tissue was formed deeper inside the interbead spacing, adhering to the implant surface. The study helps to gain an insight into the degree of osseointegration of a porous-coated femoral implant.

Bone remodelling in implanted proximal femur using topology optimization and parameterized cellular model

The clinical relevance of bone remodelling predictions calls for accurate finite element (FE) modelling of implant-bone structure and musculoskeletal loading conditions. However, simplifications in muscle loading, material properties, has often been used in FE simulations. Bone adaptation induces changes in bone apparent density and its microstructure. Multiscale simulations, involving optimization methods and biomimetic microstructural models, have proven to be promising for predicting changes in bone morphology. The objective of the study is to develop a novel computational framework to predict bone remodelling around an uncemented femoral implant, using multiscale topology optimization and a parameterized cellular model. The efficacy of the scheme was evaluated by comparing the remodelling predictions with those of isotropic strain energy density (SED) and orthotropy based formulations. The characteristic functional groups and low-density regions of Ward's triangle, predicted by the optimization scheme, were comparable to micro-CT images of the proximal femur. Although the optimization scheme predicted well comparable material distribution in the 2D femur models, the obscured material orientations in some planes of the 3D model indicate the need for a more robust modelling of the boundary conditions. Regression analysis revealed a higher correlation (0.6472) between the topology optimization and SED models than the orthotropic predictions (0.4219). Despite higher bone apposition of 10-20% around the distal tip of the implant, the bone density distributions were well comparable to clinical observations towards the proximal femur. The proposed computational scheme appears to be a viable method for including bone anisotropy in the remodelling formulation.

Effects of condensation and compressive strain on implant primary stability: A longitudinal, in vivo, multiscale study in mice

Aims

Surgeons and most engineers believe that bone compaction improves implant primary stability without causing undue damage to the bone itself. In this study, we developed a murine distal femoral implant model and tested this dogma.

Methods

Each mouse received two femoral implants, one placed into a site prepared by drilling and the other into the contralateral site prepared by drilling followed by stepwise condensation.

Results

Condensation significantly increased peri-implant bone density but it also produced higher strains at the interface between the bone and implant, which led to significantly more bone microdamage. Despite increased peri-implant bone density, condensation did not improve implant primary stability as measured by an in vivo lateral stability test. Ultimately, the condensed bone underwent resorption, which delayed the onset of new bone formation around the implant.

Conclusion

Collectively, these multiscale analyses demonstrate that condensation does not positively contribute to implant stability or to new peri-implant bone formation.

Cite this article:Bone Joint Res. 2020;9(2):60–70.

A comprehensive analysis of bio-inspired design of femoral stem on primary and secondary stabilities using mechanoregulatory algorithm

The coated porous section of stem surface is initially filled with callus that undergoes osseointegration process, which develops a bond between stem and bone, lessens the micromotions and transfers stresses to the bone, proximally. This phenomenon attributes to primary and secondary stabilities of the stems that exhibit trade-off the stem stiffness. This study attempts to ascertain the influence of stem stiffness on peri-prosthetic bone formation and stress shielding when in silico models of solid CoCr alloy and Ti alloy stems, and porous Ti stems (53.8 GPa and 31.5 GPa Young's moduli) were implanted. A tissue differentiation predictive mechanoregulation algorithm was employed to estimate the evolutionary bond between bone and stem interfaces with 0.5-mm- and 1-mm-thick calluses. The results revealed that the high stiffness stems yielded higher stress shielding and lower micromotions than that of low stiffness stems. Contrarily, bone formation around solid Ti alloy stem and porous Ti 53.8 GPa stem was augmented in 0.5-mm- and 1-mm-thick calluses, respectively. All designs of stems exhibited different rates of bone formation, diverse initial micromotions and stress shielding; however, long-term bone formation was coherent with different stress shielding. Therefore, contemplating the secondary stability of the stems, low stiffness stem (Ti 53.8 GPa) gave superior biomechanical performance than that of high stiffness stems.

Influence of collars on the primary stability of cementless femoral stems: A finite element study using a diverse patient cohort

For cementless femoral stems, there is debate as to whether a collar enhances primary stability and load transfer compared to collarless designs. Finite Element (FE) analysis has the potential to compare stem designs within the same cohort, allowing for subtle performance differences to be identified, if present. Subject-specific FE models of intact and implanted femora were run for a diverse cohort (21 males, 20 females; BMI 16.4-41.2 kg/m² , age 50-80 yrs). Collared and collarless versions of Corail^® (DePuy Synthes, Warsaw, IN) were sized and positioned using an automated algorithm that aligns the femoral/stem axes, preserves the head-center location, and maximizes metaphyseal fit. Joint contact and muscle forces simulating peak forces in level gait and stair climbing and were scaled to the body mass and applied to each subject. Three failure scenarios were assessed: Potential for peri-prosthetic fibrous tissue formation (stem micromotion), potential for peri-prosthetic bone damage (equivalent strains), and calcar bone remodeling (changes in strain-energy density). Comparisons were performed using paired t-tests. Only subtle differences were found (mean 90th percentile micromotion: Collared = 86 µm, collarless = 92.5 µm, mean 90th percentile interface strains: Collared = 733 µϵ, collarless = 767 µϵ, and similar remodeling stimuli were predicted). The slight differences observed were small in comparison with the inter-patient variability. Statement of clinical significance: Our results suggest that the presence/absence of a collar is unlikely to substantially alter the bone-implant biomechanics nor the initial mechanical environment. Hence, a collar is likely to have minimal clinical impact. Analysis using different femoral stem designs is recommended before generalising these findings. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:1185-1195, 2018.

Total Hip Intraoperative Femur Fracture: Do the Design Enhancements of a Second-Generation Tapered-Wedge Stem Reduce the Incidence?

BACKGROUND

Intraoperative femur fracture (IFF) is a well-known complication in primary uncemented total hip arthroplasty (THA). Variations in implant instrumentation design and operative technique may influence the risk of IFF. This study investigates IFF between a standard uncemented tapered-wedge femoral stem and its second-generation successor with the following design changes: size-specific medial curvature, proportional incremental stem growth, modest reduction in stem length, and distal lateral relief.

METHODS

A single experienced surgeon's patient database was retrospectively queried for IFF occurring during primary uncemented THA using a standard tapered-wedge femoral stem system or a second-generation stem. All procedures were performed using soft tissue preserving anatomic capsule repair and posterior approach. The primary outcome measure was IFF. A z-test of proportions was performed to determine significant difference between the 2 stems with respect to IFF. Patient demographics, Dorr classification, and implant characteristics were also examined.

RESULTS

Forty-one of 1510 patients (2.72%) who received a standard tapered-wedge femoral stem sustained an IFF, whereas 5 of 800 patients (0.63%) using the second-generation stem incurred an IFF. No other significant associations were found.

CONCLUSION

A standard tapered-wedge femoral stem instrumentation system resulted in greater than 4 times higher incidence of IFF than its second-generation successor used for primary uncemented THA. Identifying risk factors for IFF is necessary to facilitate implant system improvements and thus maximize patient outcomes.

Combined Bone Ingrowth and Remodeling Around Uncemented Acetabular Component: A Multiscale Mechanobiology-Based Finite Element Analysis

Bone ingrowth and remodeling are two different evolutionary processes which might occur simultaneously. Both these processes are influenced by local mechanical stimulus. However, a combined study on bone ingrowth and remodeling has rarely been performed. This study is aimed at understanding the relationship between bone ingrowth and adaptation and their combined influence on fixation of the acetabular component. Based on three-dimensional (3D) macroscale finite element (FE) model of implanted pelvis and microscale FE model of implant–bone interface, a multiscale framework has been developed. The numerical prediction of peri-acetabular bone adaptation was based on a strain-energy density-based formulation. Bone ingrowth in the microscale models was simulated using the mechanoregulatory algorithm. An increase in bone strains near the acetabular rim was observed in the implanted pelvis model, whereas the central part of the acetabulum was observed to be stress shielded. Consequently, progressive bone apposition near the acetabular rim and resorption near the central region were observed. Bone remodeling caused a gradual increase in the implant–bone relative displacements. Evolutionary bone ingrowth was observed around the entire acetabular component. Poor bone ingrowth of 3–5% was predicted around the centro-inferio and inferio-posterio-superio-peripheral regions owing to higher implant–bone relative displacements, whereas the anterio-inferior and centro-superior regions exhibited improved bone ingrowth of 35–55% due to moderate implant–bone relative displacement. For an uncemented acetabular CoCrMo component, bone ingrowth had hardly any effect on bone remodeling; however, bone remodeling had considerable influence on bone ingrowth.

Novel chitosan/diclofenac coatings on medical grade stainless steel for hip replacement applications

Corrosion resistance, biocompatibility, improved osteointegration, as well the prevention of inflammation and pain are the most desired characteristics of hip replacement implants. In this study we introduce a novel multi-layered coating on AISI 316LVM stainless steel that shows promise with regard to all mentioned characteristics. The coating is prepared from alternating layers of the biocompatible polysaccharide chitosan and the non-steroid anti-inflammatory drug (NSAID), diclofenac. Electrochemical methods were employed to characterize the corrosion behavior of coated and uncoated samples in physiological solution. It is shown that these coatings improve corrosion resistance. It was also found that these coatings release the incorporated drug in controlled, multi-mechanism manner. Adding additional layers on top of the as-prepared samples, has potential for further tailoring of the release profile and increasing the drug dose. Biocompatibility was proven on human-derived osteoblasts in several experiments. Only viable cells were found on the sample surface after incubation of the samples with the same cell line. This novel coating could prove important for prolongation of the application potential of steel-based hip replacements, which are these days often replaced by more expensive ceramic or other metal alloys.

Four decades of finite element analysis of orthopaedic devices: where are we now and what are the opportunities?

Finite element has been used for more than four decades to study and evaluate the mechanical behaviour total joint replacements. In Huiskes seminal paper "Failed innovation in total hip replacement: diagnosis and proposals for a cure", finite element modelling was one of the potential cures to avoid poorly performing designs reaching the market place. The size and sophistication of models has increased significantly since that paper and a range of techniques are available from predicting the initial mechanical environment through to advanced adaptive simulations including bone adaptation, tissue differentiation, damage accumulation and wear. However, are we any closer to FE becoming an effective screening tool for new devices? This review contains a critical analysis of currently available finite element modelling techniques including (i) development of the basic model, the application of appropriate material properties, loading and boundary conditions, (ii) describing the initial mechanical environment of the bone-implant system, (iii) capturing the time dependent behaviour in adaptive simulations, (iv) the design and implementation of computer based experiments and (v) determining suitable performance metrics. The development of the underlying tools and techniques appears to have plateaued and further advances appear to be limited either by a lack of data to populate the models or the need to better understand the fundamentals of the mechanical and biological processes. There has been progress in the design of computer based experiments. Historically, FE has been used in a similar way to in vitro tests, by running only a limited set of analyses, typically of a single bone segment or joint under idealised conditions. The power of finite element is the ability to run multiple simulations and explore the performance of a device under a variety of conditions. There has been increasing usage of design of experiments, probabilistic techniques and more recently population based modelling to account for patient and surgical variability. In order to have effective screening methods, we need to continue to develop these approaches to examine the behaviour and performance of total joint replacements and benchmark them for devices with known clinical performance. Finite element will increasingly be used in the design, development and pre-clinical testing of total joint replacements. However, simulations must include holistic, closely corroborated, multi-domain analyses which account for real world variability.

Human proximal femur bone adaptation to variations in hip geometry

The study of bone mass distribution at proximal femur may contribute to understand the role of hip geometry on hip fracture risk. We examined how bone mineral density (BMD) of proximal femur adapts to inter individual variations in the femoral neck length (FNL), femoral neck width (FNW) and neck shaft angle (NSA). A parameterized and dimensionally scalable 3-D finite element model of a reference proximal femur geometry was incrementally adjusted to adopt physiological ranges at FNL (3.90-6.90cm), FNW (2.90-3.46cm), and NSA (109-141º), yielding a set of femora with different geometries. The bone mass distribution for each femur was obtained with a suitable bone remodelling model. The BMDs at the integral femoral neck (FN) and at the intertrochanteric (ITR) region, as well as the BMD ratio of inferomedial to superolateral (IM:SL) regions of FN and BMD ratio of FN:ITR were used to represent bone mass distribution. Results revealed that longer FNLs present greater BMD (g/cm(3)) at the FN, mainly at the SL region, and at the ITR region. Wider FNs were associated with reduced BMD at the FN, particularly at the SL region, and at the ITR region. Larger NSAs up to 129° were associated with BMD diminutions at the FN and ITR regions and with increases of the IM:SL BMD ratio while NSAs larger than 129° resulted in decrease of the IM:SL BMD ratio. These findings suggest hip geometry as moderator of the mechanical loading influence on bone mass distribution at proximal femur with higher FNL favoring the BMD of FN and ITR regions and greater FNW and NSA having the opposite effect. Augmented values of FNL and FNW seem also to favor more the BMD at the superolateral than at the inferomedial FN region.

Improving peri-prosthetic bone adaptation around cementless hip stems: a clinical and finite element study

This study assessed whether the Symax™ implant, a modification of the Omnifit(®) stem (in terms of shape, proximal coating and distal surface treatment), would yield improved bone remodelling in a clinical DEXA study, and if these results could be predicted in a finite element (FE) simulation study. In a randomized clinical trial, 2 year DEXA measurements between the uncemented Symax™ and Omnifit(®) stem (both n=25) showed bone mineral density (BMD) loss in Gruen zone 7 of 14% and 20%, respectively (p<0.05). In contrast, the FE models predicted a 28% (Symax™) and 26% (Omnifit(®)) bone loss. When the distal treatment to the Symax™ was not modelled in the simulation, bone loss of 35% was predicted, suggesting the benefit of this surface treatment for proximal bone maintenance. The theoretical concept for enhanced proximal bone loading by the Symax™, and the predicted remodelling pattern were confirmed by DEXA-results, but there was no quantitative match between clinical and FE findings. This was due to a simulation based on incomplete assumptions concerning the yet unknown biological and mechanical effects of the new coating and surface treatment. Study listed under ClinicalTrials.gov with number NCT01695213.

Biomechanical determinants of the stability of dental implants: influence of the bone-implant interface properties

Dental implants are now widely used for the replacement of missing teeth in fully or partially edentulous patients and for cranial reconstructions. However, risks of failure, which may have dramatic consequences, are still experienced and remain difficult to anticipate. The stability of biomaterials inserted in bone tissue depends on multiscale phenomena of biomechanical (bone-implant interlocking) and of biological (mechanotransduction) natures. The objective of this review is to provide an overview of the biomechanical behavior of the bone-dental implant interface as a function of its environment by considering in silico, ex vivo and in vivo studies including animal models as well as clinical studies. The biomechanical determinants of osseointegration phenomena are related to bone remodeling in the vicinity of the implants (adaptation of the bone structure to accommodate the presence of a biomaterial). Aspects related to the description of the interface and to its space-time multiscale nature will first be reviewed. Then, the various approaches used in the literature to measure implant stability and the bone-implant interface properties in vitro and in vivo will be described. Quantitative ultrasound methods are promising because they are cheap, non invasive and because of their lower spatial resolution around the implant compared to other biomechanical approaches.

Bone remodelling around a cementless glenoid component

Post-operative change in the mechanical loading of bone may trigger its (mechanically induced) adaptation and hamper the mechanical stability of prostheses. This is especially important in cementless components, where the final fixation is achieved by the bone itself. The aim of this study is, first, to gain insight into the bone remodelling process around a cementless glenoid component, and second, to compare the possible bone adaptation when the implant is assumed to be fully bonded (best case scenario) or completely loose (worst case scenario). 3D finite element models of a scapula with and without a cementless glenoid component were created. 3D geometry of the scapula, material properties, and several physiological loading conditions were acquired from or estimated for a specific cadaver. Update of the bone density after implantation was done according to a node-based bone remodelling scheme. Strain energy density for different loading conditions was evaluated, weighted according to their frequencies in activities of daily life and used as a mechanical stimulus for bone adaptation. The average bone density in the glenoid increased after implantation. However, local bone resorption was significant in some regions next to the bone-implant interface, regardless of the interface condition (bonded or loose). The amount of bone resorption was determined by the condition imposed to the interface, being slightly larger when the interface was loose. An ideal screw, e.g. in which material fatigue was not considered, was enough to keep the interface micromotions small and constant during the entire bone adaptation simulation.

On the optimal shape of hip implants

The success of a total hip arthroplasty is strongly related to the initial stability of the femoral component and to the stress shielding effect. In fact, for cementless stems, initial stability is essential to promote bone ingrowth into the stem coating. An inefficient primary stability is also a cause of thigh pain. In addition, the bone adaptation after the surgery can lead to an excessive bone loss and, consequently, can compromise the success of the implant. These factors depend on prosthesis design, namely on material, interface conditions and shape. Although, surgeons use stems with very different geometries, new computational tools using structural optimization methods have been used to achieve a better design in order to improve initial stability and therefore, the implant durability. In this work, a multi-criteria shape optimization process is developed to study the relationship between implants performance and geometry. The multi-criteria objective function takes into account the initial stability of the femoral stem and the effect of stress shielding on bone adaptation after the surgery. Then, the optimized stems are tested using a concurrent model for bone remodeling and osseointegration to evaluate long-term performance. Additionally, the sensitivity to misalignments is analyzed, since femoral stems are often placed in varus or valgus position. Results show that the different criteria are contradictory resulting in different characteristics for the hip stem. However, the multi-criteria formulation leads to compromise solutions, with a combination of the geometric characteristics obtained for each criterion separately.

Surgical treatment options in patients with impaired bone quality

BACKGROUND

Bone quality should play an important role in decision-making for orthopaedic treatment options, implant selection, and affect ultimate surgical outcomes. The development of decision-making tools, currently typified by clinical guidelines, is highly dependent on the precise definition of the term(s) and the appropriate design of basic and clinical studies. This review was performed to determine the extent to which the issue of bone quality has been subjected to this type of process.

QUESTIONS/PURPOSES

We address the following issues: (1) current methods of clinically assessing bone quality; (2) emerging technologies; (3) how bone quality connects with surgical decision-making and the ultimate surgical outcome; and (4) gaps in knowledge that need to be closed to better characterize bone quality for more relevance to clinical decision-making.

METHODS

PubMed was used to identify selected papers relevant to our discussion. Additional sources were found using the references cited by identified papers.

RESULTS

Bone mineral density remains the most commonly validated clinical reference; however, it has had limited specificity for surgical decision-making. Other structural and geometric measures have not yet received enough study to provide definitive clinical applicability. A major gap remains between the basic research agenda for understanding bone quality and the transfer of these concepts to evidence-based practice.

CONCLUSIONS

Basic bone quality needs better definition through the systematic study of emerging technologies that offer a more precise clinical characterization of bone. Collaboration between basic scientists and clinicians needs to improve to facilitate the development of key questions for sound clinical studies.

Toward the development of virtual surgical tools to aid orthopaedic FE analyses

Computational models of joint anatomy and function provide a means for biomechanists, physicians, and physical therapists to understand the effects of repetitive motion, acute injury, and degenerative diseases. Finite element models, for example, may be used to predict the outcome of a surgical intervention or to improve the design of prosthetic implants. Countless models have been developed over the years to address a myriad of orthopaedic procedures. Unfortunately, few studies have incorporated patient-specific models. Historically, baseline anatomic models have been used due to the demands associated with model development. Moreover, surgical simulations impose additional modeling challenges. Current meshing practices do not readily accommodate the inclusion of implants. Our goal is to develop a suite of tools (virtual instruments and guides) which enable surgical procedures to be readily simulated and to facilitate the development of all-hexahedral finite element mesh definitions.