Flow pattern analysis in a highly stenotic patient-specific carotid bifurcation model using a turbulence model

Investigation of Artery Wall Elasticity Effect on the Prediction of Atherosclerosis by Hemodynamic Factors

Atherosclerosis is a vascular disease in which some parts of the artery undergo stenosis due to the aggregation of fat. The causes and location of stenosis can be determined using fluid mechanics and parameters such as pressure, effective wall shear stress, and oscillatory shear index (OSI). The present study, for the first time, numerically investigates the pulsatile blood flow inside arteries with elastic and rigid walls in simple and double stenosis (80% stenosis) by using $k$ -ω model and physiological pulse. The reason for applying the $k$ -ω model in the present study was to provide more consistent results with clinical results to improve the accuracy in estimating atherosclerosis disease. The investigation of the time-mean wall shear stress indicated that for double stenosis, the difference between the results of the rigid and elastic artery assumptions is greater than the case of simple stenosis, so that this difference percent can be up to 2.5 times. In addition, the results showed that the pressure drop for the first stenosis is greater than the second stenosis, by 810 Pa (for solid artery) and 540 Pa (for elastic artery). The results also revealed that for simple stenosis, the length of the diseases prone zone in the elastic artery is 21% longer than the rigid one which this figure for double stenosis is calculated to be about 40%. Comparing the results of the simple stenosis with double, one affirmed that the artery wall thickness growth for case of double stenosis is greater than that of the single one.

An experimental evaluation of a concept to improve conventional aortic prostheses

Conventionally used textile prosthesis for traditional open surgical repair (OSR) of aortic aneurysms have a lower compliance than the native aortic tissue. Graft placements lead to an acute drop in compliance which effects cardiovascular risk and the development of graft related complications. A custom-made spring casing was applied to a Dacron graft segment under physiological pressure conditions within a five-element biventricular mock circulation loop, to investigate experimentally a concept to improve the compliance of a conventional aortic prosthesis by changing the transverse graft cross-section. Two different prosthesis locations, proximal and distal of compliant silicone tubing were used to study uniaxial graft compression with an elastic device. To characterise the devices' performance by means of pulse pressure (PP), diastolic pressure (P_dia) and pulse wave velocity(PWV), fluid pressures and flow were recorded. In a proximal graft setting (ascending aorta repair) elastic uniaxial compression with a custom-made spring casing (2 cm width) could significantly reduce PP by 10-14% (p < .001) and slowed PWV from 6.7 to 5.2 m/s (22%, p = .002). Applied to a graft in a distal position, the spring casing demonstrated less impact on PP (2-10%), but significantly reduced PWV in this mock aorta segment from 13.7 to 5.5 m/s (60%, p = .004). In conclusion, a newly conceptualised spring casing applied to the external wall of synthetic aortic grafts can reduce PP and slow PWV. By restoring elastic aortic recoil in stiff textile aortic prostheses, the presented concept is a potential solution to improve long-term aortic prosthesis related complications.

Skin temperature maps as a measure of carotid artery stenosis

In this study, the effect of carotid artery stenosis on the neck skin temperature maps was investigated. With the presence of stenosis, alterations in the carotid artery hemodynamics bring about changes in the heat transfer to the surrounding tissue. This is expected to be captured in the resulting temperature map over the external neck skin surface; possibly it correlates to the presence of stenosis. A total of twenty carotid artery samples, from ten patients with both sides normal (0% stenosis), stenosis (>50%) on one side, and stenosis (>50%) on both sides, were studied. Duplex Ultrasound and infrared (IR) thermography examinations were performed. A computational study, on an ideal 3-dimensional (3D) carotid artery and jugular vein model encapsulated with a solid neck tissue phantom resembling the human neck, was carried out. Incorporating the patient-specific geometrical (depth of artery and stenosis) and flow (peak systolic and end diastolic inlet velocity) boundary conditions, conjugate bio-heat transfer was studied using a finite volume numerical scheme. Simulation results and in-vivo thermal maps show that the average temperature on the external neck skin surface is significantly higher for normal patients (32.82 ± 0.53 °C versus 32.00 ± 0.37 °C, p < 0.001). Furthermore, the thermal region of interests (TROIs) were extracted from the in-vivo thermal images, which both qualitatively and quantitatively distinguish the normal and diseased cases. This study suggests the potential of thermal feature-based screening of patients with carotid artery stenosis.

Geometric determinants of local hemodynamics in severe carotid artery stenosis

In cases of severe carotid artery stenosis (CAS), carotid endarterectomy (CEA) is performed to recover lumen patency and alleviate stroke risk. Under current guidelines, the decision to surgically intervene relies primarily on the percent loss of native arterial lumen diameter within the stenotic region (i.e. the degree of stenosis). An underlying premise is that the degree of stenosis modulates flow-induced wall shear stress elevations at the lesion site, and thus indicates plaque rupture potential and stroke risk. Here, we conduct a retrospective study on pre-CEA computed tomography angiography (CTA) images from 50 patients with severe internal CAS (>60% stenosis) to better understand the influence of plaque and local vessel geometry on local hemodynamics, with geometrical descriptors that extend beyond the degree of stenosis. We first processed CTA images to define a set of multipoint geometric metrics characterizing the stenosed region, and next performed computational fluid dynamics simulations to quantify local wall shear stress and associated hemodynamic metrics. Correlation and regression analyses were used to relate obtained geometric and hemodynamic metrics, with inclusion of patient sub-classification based on the degree of stenosis. Our results suggest that in the context of severe CAS, prediction of shear stress-based metrics can be enhanced by consideration of readily available, multipoint geometric metrics in addition to the degree of stenosis.

Imaging modalities to diagnose carotid artery stenosis: progress and prospect

In the past few decades, imaging has been developed to a high level of sophistication. Improvements from one-dimension (1D) to 2D images, and from 2D images to 3D models, have revolutionized the field of imaging. This not only helps in diagnosing various critical and fatal diseases in the early stages but also contributes to making informed clinical decisions on the follow-up treatment profile. Carotid artery stenosis (CAS) may potentially cause debilitating stroke, and its accurate early detection is therefore important. In this paper, the technical development of various CAS diagnosis imaging modalities and its impact on the clinical efficacy is thoroughly reviewed. These imaging modalities include duplex ultrasound (DUS), computed tomography angiography (CTA) and magnetic resonance angiography (MRA). For each of the imaging modalities considered, imaging methodology (principle), critical imaging parameters, and the extent of imaging the vulnerable plaque are discussed. DUS is usually the initial recommended CAS diagnostic examination. However, for the therapeutic intervention, either MRA or CTA is recommended for confirmation, and for added information on intracranial cerebral circulation and aortic arch condition for procedural planning. Over the past few decades, the focus of CAS diagnosis has also shifted from pure stenosis quantification to plaque characterization. This has led to further advancement in the existing imaging tools and development of other potential imaging tools like Optical coherence tomography (OCT), photoacoustic tomography (PAT), and infrared (IR) thermography.

Detergent-Based Decellularization of Bovine Carotid Arteries for Vascular Tissue Engineering

Vascular diseases are an increasing health issue, and common alloplastic, allogenic or autologous vascular grafts show frequent complications. The aim of this study is to develop an acellular, xenogenic bypass-graft from a bovine carotid artery (BAC) using detergent-based protocols. We compared decellularization with sodium desoxycholate (DOA), 3-[(3-Cholamidopropyl)dimethylammonio]-1-propanesulfonate (Chaps), sodium dodecyl sulfate (SDS), and Triton X100 and improved suitable methods by variation of concentration, buffer system, incubation time, temperature, rinsing, and flow rate. All processes were evaluated systematically based on cellular residues, biocompatibility, structural and mechanical integrity. Decellularization with SDS and Triton X100 was not sufficient for the removal of cellular components. We optimized protocols using 1% DOA and Chaps by a buffered system at 37 °C with extended decellularization and rinsing. Decellularization with DOA depleted DNA to 0.5 ± 0.1% and soluble proteins to 0.6 ± 0.2%. Using Chaps, DNA was reduced to 0.2 ± 0.2% and proteins to 0.6 ± 0.3%. The improved protocols eliminated RNA completely from the matrix, and no cytotoxic effects were detected. Mechanical and structural integrity of decellularized tissues was comparable to non-decellularized controls. Our method effectively removed cellular components from the extracellular matrix while preserving the structural and mechanical integrity of the tissue. Decellularized BACs could be a promising alternative for vascular replacement therapy.

Numerical and experimental analysis of the transitional flow across a real stenosis

In this paper, we present a numerical study of the pulsatile transitional flow crossing a severe real stenosis located right in front of the bifurcation between the right subclavian and right common carotid arteries. The simulation allows one to determine relevant features of this subject-specific flow, such as the pressure waves in the right subclavian and right common carotid arteries. We explain the subclavian steal syndrome suffered by the patient in terms of the drastic pressure drop in the right subclavian artery. This pressure drop is caused by both the diverging part of the analyzed stenosis and the reverse flow in the bifurcation induced by another stenosis in the right internal carotid artery.

Hemodynamics in Transplant Renal Artery Stenosis and its Alteration after Stent Implantation Based on a Patient-specific Computational Fluid Dynamics Model

Background:

Accumulating studies on computational fluid dynamics (CFD) support the involvement of hemodynamic factors in artery stenosis. Based on a patient-specific CFD model, the present study aimed to investigate the hemodynamic characteristics of transplant renal artery stenosis (TRAS) and its alteration after stent treatment.

Methods:

Computed tomography angiography (CTA) data of kidney transplant recipients in a single transplant center from April 2013 to November 2014 were reviewed. The three-dimensional geometry of transplant renal artery (TRA) was reconstructed from the qualified CTA images and categorized into three groups: the normal, stenotic, and stented groups. Hemodynamic parameters including pressure distribution, velocity, wall shear stress (WSS), and mass flow rate (MFR) were extracted. The data of hemodynamic parameters were expressed as median (interquartile range), and Mann–Whitney U-test was used for analysis.

Results:

Totally, 6 normal, 12 stenotic, and 6 stented TRAs were included in the analysis. TRAS presented nonuniform pressure distribution, adverse pressure gradient across stenosis throat, flow vortex, and a separation zone at downstream stenosis. Stenotic arteries had higher maximal velocity and maximal WSS (2.94 [2.14, 3.30] vs. 1.06 [0.89, 1.15] m/s, 256.5 [149.8, 349.4] vs. 41.7 [37.8, 45.3] Pa at end diastole, P = 0.001; 3.25 [2.67, 3.56] vs. 1.65 [1.18, 1.72] m/s, 281.3 [184.3, 364.7] vs. 65.8 [61.2, 71.9] Pa at peak systole, P = 0.001) and lower minimal WSS and MFRs (0.07 [0.03, 0.13] vs. 0.52 [0.45, 0.67] Pa, 1.5 [1.0, 3.0] vs. 11.0 [8.0, 11.3] g/s at end diastole, P = 0.001; 0.08 [0.03, 0.19] vs. 0.70 [0.60, 0.81] Pa, 2.0 [1.3, 3.3] vs. 16.5 [13.0, 20.3] g/s at peak systole, P = 0.001) as compared to normal arteries. Stent implantation ameliorated all the alterations of the above hemodynamic factors except low WSS.

Conclusions:

Hemodynamic factors were significantly changed in severe TRAS. Stent implantation can restore or ameliorate deleterious change of hemodynamic factors except low WSS at stent regions.

Subject-Specific Fully-Coupled and One-Way Fluid-Structure Interaction Models for Modeling of Carotid Atherosclerotic Plaques in Humans

Background

Hemodynamics play an important role in the development and progression of carotid atherosclerosis, and may be important in the assessment of plaque vulnerability. The aim of this study was to develop a system to assess the hemodynamics of carotid atherosclerotic plaques using subject-specific fluid-structure interaction (FSI) models based on magnetic resonance imaging (MRI).

Material/Methods

Models of carotid bifurcations (n=86 with plaques from 52 patients, n=14 normal carotids from 12 participants) were obtained at the Department of Radiology, Beijing Tian Tan Hospital between 2010 and 2013. The maximum von Mises stress, minimum pressure, and flow velocity values were assessed at the most stenotic site in patients, or at the carotid bifurcations in healthy volunteers. Results of one-way FSI were compared with fully-coupled FSI for the plaques of 19 randomly selected models.

Results

The maximum von Mises stress and the minimum pressure and velocity were significantly increased in the stenosis group compared with controls based on one-way FSI (all P<0.05). The maximum von Mises stress and the minimum pressure were significantly higher and the velocity was significantly lower based on fully coupled FSI compared with on-way FSI (all P<0.05). Although there were differences in numerical values, both methods were equivalent. The maximum von Mises stress of vulnerable plaques was significantly higher than stable plaques (P<0.001). The maximum von Mises stress of the group with fibrous cap defect was significantly higher than the group without fibrous cap defect (P=0.001).

Conclusions

The hemodynamics of atherosclerotic plaques can be assessed noninvasively using subject-specific models of FSI based on MRI.