Detailed Quantum Mechanical Studies on Three Bioactive Benzimidazole Derivatives and Their Raman Enhancement on Adsorption over Graphene Sheets

DFT analysis on the adsorption of melamine in Ga12-N12/P12 nanocages: solvent effects, SERS analysis, reactivity properties

Due to its negative effects on people, melamine contamination in food products are detected and filtered. Amongst several sensory schemes for the screening of melamine poisoning, one of the most promising techniques is the use of nanomaterial based sensing for real time applicability in industries. In the current work, we have looked into the way melamine binds to Ga12-N12/P12 nanocages. Surface-enhanced Raman scattering (SERS), a successful spectroscopic technique is used to monitor melamine. Density functional theoretical (DFT) computations were used to study the sensing properties of melamine (Me) with Ga12-N12/P12 nanocages. Reactivity and Mulliken charge analyses show charge transfer from melamine to nanocage. Me-Ga12-N12 and Me-Ga12P12 clusters have adsorption energies of -47.54 and -33.12 kcal/mol, respectively. All nanocage-Me systems have a significant increase in polarizability. The electron densities revealed non-covalent interactions in the adsorbed systems. All adsorption energies in aqueous media are negative, indicating an attractive and exothermic reaction, with maximum value in water for Me-Ga12N12 and in acetone for Me-Ga12P12. Evidence of SERS is observed due to the enhancement of different vibrational modes.Communicated by Ramaswamy H. Sarma.

TD-DFT, DFT, docking, MD simulations, and concentration-dependent SERS investigations of a bioactive trifluoromethyl derivative having human acetylcholinesterase and butyrylcholinesterase in silver colloids

CONTEXT

Various concentrations of (E)-4-methoxy-N'-(2-(trifluoromethyl)benzylidene) benzohydrazide (EMT) adsorbed on colloidal silver nanoparticles were studied using SERS and results were compared to the normal Raman spectrum. DFT calculations were used to validate experimental findings. Theoretically, the structures of the EMT and EMT-Ag6 systems were optimized. The UV-Vis spectral analysis's red shift and lower intensity behavior show that EMT has chemisorbed onto Ag nanoparticles. Charge transfer (CT) from Ag to EMT is highlighted by FMO analysis. The CT interaction in EMT and EMT-Ag6 was further verified by MEP and Mulliken charge analyses. The EMT was adsorbed on Ag nanoparticles with tilted orientation and orientation changes with colloidal concentration, according to SERS spectrum analysis. Docking EMT with 4PQE and 5DYW binding affinities are found to be -9.7 and -8.1 kcal/mol. MD simulations give the competence of 5DYW-EMT and 4PQE-EMT in their intended binding interactions and their ability to establish enduring associations with the protein of interest.

METHODS

DFT was used to optimize the molecular structures of EMT and EMT-Ag6 using B3LYP/6-311++G* (LANL2DZ basis set for Ag). A molecular dynamics simulation study was conducted on the 4PQE-EMT and 5DYW-EMT systems using the Desmond software for 100 ns.

Theoretical model study of adsorbed antimalarial-graphene dimers: doping effects, photophysical parameters, intermolecular interactions, edge adsorption, and SERS

Future diagnostics and therapy applications are in part riding on the discovery and implementation of new optical techniques and strategies (which often derive from dyads) for example, prediction of features in surface-enhanced Raman spectroscopy requires the study of chromophore-chromophore interactions involve intermolecular forces, drug delivery, and photo mechanisms which are of great interest. New matches between chromophore systems (i.e. FRET), and π-delocalized surfaces are important to study. We explore low-molecular weight drug molecules and their interaction with the reporter material/surface of graphene. Bonding, charge transfer and orbital interactions for 2-amino-5-(1-methyl-5-nitro-2-imidazolyl)-1,3,4-thiadiazole (megazol or AMIT) on graphene were carried out. The graphene model substrate was monotonically/monatomically substituted (doped) with one neutral heteroatom (N/O/S/B) in place of one carbon center; chemical adsorption of AMIT is due to charge transfer from doped graphene to AMIT (DFT). Our AMIT-nanocluster studies show that the nanoclusters will act as a sensor component for the detection of drugs due to SERS. Our findings identified that the greater the energy of the charge transfer, the stronger the calculated chemical adsorption. Additionally, charge transfer is highest for the N-doped systems and least for pristine graphene, resulting in a stronger adsorption energy for N-doped graphene. Mulliken charge analysis of structures confirms enhancement found in QD-AMIT systems.Communicated by Ramaswamy H. Sarma.

Theoretical study of glycoluril by highly symmetrical magnesium oxide Mg12O12 nanostructure: adsorption, detection, SERS enhancement, and electrical conductivity study

Using metal substrates that are nanoscale in size, surface-enhanced Raman scattering (SERS) is a technique for enhancing the Raman signal of biomolecules. Numerous industries including sensing materials, adsorption and medical devices, use nanomaterials like nanocages and nanoclusters. To discover a possible novel sensor platform involving a small metal cluster and a curved rigid substrate, we used density functional theoretical (DFT) simulations to explore the adsorption of glycoluril (GLC), a prospective drug intermediate, on a pure magnesium oxide cage (Mg₁₂O₁₂). This well defined cage was used as (i) an exact probable structure that could be used as well as (ii) a general model for MgO nanostructures. We also investigated the mono Al-doped Mg₁₂O₁₂ nanocage version Mg₁₁AlO₁₂. All computations were performed at the M06-2X level of theory. The GLC binds to the Mg₁₂O₁₂ nanocage by way of strong donor-acceptor interactions. The adsorption is releasing - 45.80 kcal mol^-1 of energy. Due to Al doping, the energy gap of GLC-Mg₁₁AlO₁₂ (1.91 eV) is reduced from that of GLC-Mg₁₂O₁₂ (4.28 eV) and hence there is an increase in electrical conductivity of GLC-Mg₁₁AlO₁₂. The electronic change in the nanocage's conductivity can be transformed into an electrical signal which can be used to detect the presence of the drug analyte. In addition, when a GLC molecule is present, the work function of the nanocage is also reduced. The MgO nanocage, we conclude, is a work function type as well as a possible electronic sensor for GLC drug detection. GLC desorption from the Mg₁₁AlO₁₂ surface recovers more quickly in comparison with Mg₁₂O₁₂ recovery time. The AIM and NCIs assessed in this study were performed to help analyze the electronic structures of the complexes. Our findings pave the possibility for Mg₁₁AlO₁₂ nanostructures to be used in drug recognition.

Comprehensive Study of the Chemistry behind the Stability of Carboxylic SWCNT Dispersions in the Development of a Transparent Electrode

Single-walled carbon nanotubes (SWCNTs) are well-known for their excellent electrical conductivity. One promising application for SWCNT-based thin films is as transparent electrodes for uncooled mid-IR detectors (MIR). In this paper, a combination of computational and experimental studies were performed to understand the chemistry behind the stability of carboxylic SWCNTs (SWCNTs-COOH) dispersions in different solvents. A computational study based on the density functional tight-binding (DFTB) method was applied to understand the interactions of COOH-functionalized carbon nanotubes with selected solvents. Attention was focused on understanding how the protonation of COOH groups influences the binding energies between SWCNTs and different solvents. Thin film electrodes were prepared by alternately depositing PEI and SWCNT-COOH on soda lime glass substrates. To prepare a stable SWCNT dispersion, different solvents were tested, such as deionized (DI) water, ethanol and acetone. The SWCNT-COOH dispersion stability was tested in different solvents. Samples were prepared to study the relationship between the number of depositions, transparency in the MIR range (2.5–5 µm) and conductivity, looking for the optimal thickness that would satisfy the application. The MIR transparency of the electrode was reduced by 20% for the thickest SWCNT layers, whereas sheet resistance values were reduced to 150–200 kΩ/sq.

DFT analysis of valproic acid adsorption onto Al12/B12-N12/P12 nanocages with solvent effects

Using density functional theory, the adsorption of valproic acid onto the surface of fullerene-like nanocages was investigated. Valproic acid interacts with the nanocages through the carboxylic group with energies of - 144.14, - 109.71, - 105.22, and - 84.96 kcal/mol. The frontier molecular orbital (FMO) energy levels were considerably altered upon adsorption, resulting in a reduction in energy gap and increase in electrical conductivity. This suggests that nanocages could be used as sensors as well as options for drug administration in biological systems. Solvation effects in water are also reported.