A Critical Review of Analytical Methods in Pharmaceutical Matrices for Determination of Corticosteroids

UPLC-PDA factorial design assisted method for simultaneous determination of oseltamivir, dexamethasone, and remdesivir in human plasma

A green and simple UPLC method was developed and optimized, adopting a factorial design for simultaneous determination of oseltamivir phosphate and remdesivir with dexamethasone as a co-administered drug in human plasma and using daclatasvir dihydrochloride as an internal standard within 5 min. The separation was established on UPLC column BEH C18 1.7 μm (2.1 × 100.0 mm) connected to UPLC pre-column BEH 1.7 μm (2.1 × 5.0 mm) at 50 °C with an injection volume of 10 μL. The photodiode array detector (PDA) was set at three wavelengths of 220, 315, and 245 nm for oseltamivir phosphate, the internal standard, and both dexamethasone and remdesivir, respectively. The mobile phase consisted of methanol and ammonium acetate solution (40 mM) adjusted to pH 4 in a ratio of 61.5:38.5 (v/v) with a flow rate of 0.25 mL min-1. The calibration curves were linear over 500.0-5000.0 ng mL-1 for oseltamivir phosphate, over 10.0-500.0 ng mL-1 and 500.0-5000.0 ng mL-1 for dexamethasone, and over 20.0-500 ng mL-1 and 500.0-5000.0 ng mL-1 for remdesivir. The Gibbs free energy and Van't Hoff plots were used to investigate the effect of column oven temperatures on retention times. Fluoride-EDTA anticoagulant showed inhibition activity on the esterase enzyme in plasma. The proposed method was validated according to the M10 ICH, FDA, and EMA's bioanalytical guidelines. According to Eco-score, GAPI, and AGREE criteria, the proposed method was considered acceptable green.

Development of UPLC method for simultaneous assay of some COVID-19 drugs utilizing novel instrumental standard addition and factorial design

A green, rapid, and simple RP-UPLC method was developed and optimized by full factorial design for the simultaneous separation of oseltamivir phosphate, daclatasivir dihydrochloride, and remdesivir, with dexamethasone as a co-administered drug. The separation was established on a UPLC column BEH C₁₈ 1.7 µm (2.1 × 100.0 mm) connected with a UPLC pre-column BEH 1.7 µm (2.1 × 5.0 mm) at 25 °C with an injection volume of 10 µL. The detector (PDA) was set at 239 nm. The mobile phase consisted of methanol and ammonium acetate (8.1818 mM) in a ratio of 75.7: 24.3 (v/v). The flow rate was set at 0.048 mL min^-1. The overall separation time was 9.5 min. The retention times of oseltamivir phosphate, dexamethasone, daclatasivir dihydrochloride, and remdesivir were 6.323 ± 0.145, 7.166 ± 0.036, 8.078 ± 0.124, and 8.572 ± 0.166 min (eight replicates), respectively. The proposed method demonstrated linearity in the ranges of 10.0-500.0 (ng mL^-1) and 0.5-30.0 (µg mL^-1) for oseltamivir phosphate, 50.0-5000.0 (ng mL^-1) for dexamethasone, 25.0-1000.0 (ng mL^-1) and 0.5-25.0 (µg mL^-1) for daclatasvir dihydrochlorde, and 10.0-500.0 (ng mL^-1) and 0.5-30.0 (µg mL^-1) for remdesivir. The coefficients of determination (R²) were greater than 0.9999, with percentage recoveries greater than 99.5% for each drug. The limits of quantitation were 6.4, 1.8, 7.8, and 1.6 ng mL^-1, and the limits of detection were 1.9, 0.5, 2.0, and 0.5 ng mL^-1 for oseltamivir phosphate, dexamethasone, daclatasivir dihydrochloride, and remdesivir, respectively. The proposed method was highly precise, as indicated by the low percentage of relative standard deviation values of less than 1.2% for each drug. The average content and uniformity of dosage units in the studied drugs' dosage forms were determined. The average contents of oseltamivir phosphate, dexamethasone, daclatasivir dihydrochloride, and remdesivir were nearly 93%, 102%, 99%, and 95%, respectively, while the uniformity of dosage unit values were nearly 92%, 102%, 101%, and 97%. Two novel methods were established in this work. The first method was used to assess the stability of standard solutions. This novel method was based on the slope of regression equations. The second was to evaluate the excipient's interference using an innovative instrumental standard addition method. The novel instrumental standard addition method was performed using the UPLC instrument program. It was more accurate, sensitive, time-saving, economical, and eco-friendly than the classic standard addition method. The results showed that the proposed method can estimate the tested drugs' concentrations without interference from their dosage form excipients. According to the Eco-score (more than 75), the Green Analytical Procedure Index (GAPI), and the AGREE criteria (total score of 0.77), the suggested method was considered eco-friendly.

Synthesis of gold and copper bimetallic nanoclusters with papain for fluorescence detection of cortisone in biological samples

In this work, bimetallic gold and copper nanoclusters (Au-Cu NCs) were fabricated by using papain as a ligand. The as-synthesized papain-Au-Cu NCs displayed red fluorescence at 365 nm of UV lamp. The as-prepared papain-Au-Cu NCs display a strong fluorescence at 656 nm when excited at 390 nm. Papain encapsulated Au-Cu NCs exhibit distinct interaction site towards cortisone, which results red fluorescence "turn-off". Papain-Au-Cu NCs exhibited a rapid response and remarkable fluorescence quenching with the addition of cortisone as a biomarker. The developed probe is demonstrated for the quantification of cortisone by plotting the calibration graph between the fluorescence ratio (I₀/I) and cortisone concentration (0.031-1.00 μM) with an impressive detection limit of 1.89 nM. Interestingly, the response of papain-Au-Cu NCs towards other biomarkers and common interfering species is quite silent, signifying the selectivity of papain-Au-Cu NCs for the detection of cortisone. The probe was successfully applied to assay cortisone biomarker in urine and plasma samples. More importantly, the analytical validation of the probe was assessed by assaying cortisone in intra- and inter-day, demonstrating papain-Au-Cu NCs could serve as promising probe for the rapid detection of cortisone in biological samples.

Analytical Methods for the Determination of Major Drugs Used for the Treatment of COVID-19. A Review

At the beginning of the COVID-19 outbreak (end 2019 - 2020), therapeutic treatments based on approved drugs have been the fastest approaches to combat the new coronavirus pandemic. Nowadays several vaccines are available. However, the worldwide vaccination program is going to take a long time and its success will depend on the vaccine public's acceptance. Therefore, outside of vaccination, the repurposing of existing antiviral, anti-inflammatory and other types of drugs, have been considered an alternative medical strategy for the COVI-19 infection. Due to the broad clinical potential of the drugs, but also to their possible side effects, analytical methods are needed to monitor the drug concentrations in biological fluids and pharmaceutical products. This review deals with analytical methods developed in the period 2015 - July 2021 to detect potential drugs that, according to a literature survey, have been taken into consideration for the treatment of COVID-19. The drugs considered here have been selected on the basis of the number of articles published in the period January 2020-July 2021, using the combination of the keywords: COVID-19 and drugs or SARS-CoV-2 and drugs. A section is also devoted to monoclonal antibodies. Over the period considered, the analytical methods have been employed in a variety of real samples, such as body fluids (plasma, blood and urine), pharmaceutical products, environmental matrices and food.

Detection of 28 Corticosteroids in Pharmaceutical and Proprietary Chinese Medicinal Products Using Liquid Chromatography-Tandem Mass Spectrometry

With their potent anti-inflammatory effects, corticosteroids are popular adulterants in illicit health products for allergies, dermatitis and pain control. Their illegal supply over the counter is also a common practice for similar conditions. Prolonged, unsupervised usage of corticosteroids often leads to severe adverse effects including Cushing syndrome, adrenal insufficiency and immunosuppression. Confirming clinical suspicion of unsupervised corticosteroid usage is challenging. Apart from evaluating the adrenal function, identifying the concerned drug is the most direct proof of its consumption. While detecting corticosteroids or their metabolites in biological specimens is convincing evidence of their usage, such approach is analytically difficult. More importantly, this approach would not be useful if the patient has stopped taking the drug for some time-a situation that is often encountered clinically. We advocate a more direct approach by measuring corticosteroids in suspicious medicinal products. In the current study, a liquid chromatography-tandem mass spectrometry method for simultaneous detection of 28 corticosteroids in pharmaceutical and proprietary Chinese medicine products was developed and validated for the purpose. The method was applied to 388 cases of suspected unsupervised corticosteroids usage. Among 1,000 products tested, corticosteroids were found in 276 of them and confirmed the clinical suspicion.