X-Ray Scattering Methods for the Study of Polymer Interfaces

Application of surface-layer matrix-assisted laser desorption/ionization mass spectrometry imaging to pharmaceutical-loaded poly(ester urea) films

Polymer thin films are often used in transdermal patches as a method of continuous drug administration for patients with chronic illness. Understanding the drug segregation and distribution within these films is important for monitoring proper drug release over time. Surface-layer matrix-assisted laser desorption/ionization mass spectrometry imaging (SL-MALDI-MSI) is a unique analytical technique that provides an optical representation of chemical compositions that exist at the surface of polymeric materials. Solvent-free sublimation is employed for application of matrix to the sample surface, so that only molecules in direct contact with the matrix layer are detected. Here, these methodologies are utilized to visualize variations in drug concentration at both the air and substrate interface in pharmaceutical-loaded polymer films.

Bimetallic Copper/Ruthenium/Osmium Complexes: Observation of Conformational Differences Between the Solution Phase and Solid State by Atomic Pair Distribution Function Analysis

High-energy X-ray scattering and pair distribution function analysis (HEXS/PDF) is a powerful method to reveal the structure of materials lacking long-range order, but is underutilized for molecular complexes in solution. We demonstrate the application of HEXS/PDF with 0.26 Å resolution to uncover the solution structure of five bimetallic Cu^I /Ru^II /Os^II complexes. HEXS/PDF of each complex in acetonitrile solution confirms the pairwise distances in the local coordination sphere of each metal center as well as the metal⋅⋅⋅metal distances separated by over 12 Å. The metal⋅⋅⋅metal distance detected in solution is compared with that from the crystal structure and molecular models to confirm that distortions to the metal bridging ligand are unique to the solid state. This work presents the first example of observing sub-Ångström conformational differences by direct comparison of solution phase and solid-state structures and shows the potential for HEXS/PDF in the determination of solution structure of single molecules.

In Situ Nanoscale Characterization of Water Penetration through Plasma Polymerized Coatings

The search continues for means of making quick determinations of the efficacy of a coating for protecting a metal surface against corrosion. One means of reducing the time scale needed to differentiate the performance of different coatings is to draw from nanoscale measurements inferences about macroscopic behavior. Here we connect observations of the penetration of water into plasma polymerized (PP) protective coatings and the character of the interface between the coating and an oxide-coated aluminum substrate or model oxide-coated silicon substrate to the macroscopically observable corrosion for those systems. A plasma polymerized film from hexamethyldisiloxane (HMDSO) monomer is taken as illustrative of a hydrophobic coating, while a PP film from maleic anhydride (MA) is used as a characteristically hydrophilic coating. The neutron reflectivity (NR) of films on silicon oxide coated substrates shows that water moves more readily through the hydrophilic PP-MA film. Off-specular X-ray scattering indicates the PP-MA film on aluminum is less conformal with the substrate than is the PP-HMDSO film. Measurements with infrared-visible sum frequency generation spectroscopy (SFG), which probes the chemical nature of the interface, make clear that the chemical interactions between coating and aluminum oxide are disrupted by interfacial water. With this water penetration and interface disruption, macroscopic corrosion can occur much more rapidly. An Al panel coated with PP-MA corrodes after 1 day in salt spray, while a similarly thin (∼30 nm) PP-HMDSO coating protects an Al panel for a period on the order of one month.

Scaling Behavior and Segment Concentration Profile of Densely Grafted Polymer Brushes Swollen in Vapor

The scaling of the thickness, hs, of a densely grafted polymer brush of chain length N and grafting density σ swollen in vapor agrees quantitatively with the scaling reported by Kuhl et al. for densely grafted brushes swollen in liquid. Deep in the brush, next to the substrate, the shape of the segment concentration profile is the same whether the brush is swollen by liquid or by vapor. Differences in the segment concentration profile are manifested primarily in the swollen brush interface with the surrounding fluid. The interface of the polymer brush swollen in vapor is much more abrupt than that of the same brush swollen in liquid. This has implications for the compressibility of the swollen brush surface and for fluctuations at that surface.

Surface orientation of polystyrene based polymers: steric effects from pendant groups on the phenyl ring

Near edge X-ray absorption fine structure (NEXAFS) coupled with molecular dynamics simulations were utilized to probe the orientation at the exposed surface of the polymer film for polystyrene type polymers with various pendant functional groups off the phenyl ring. For all the polymers, the surface was oriented so that the rings are nominally normal to the film surface and pointing outward from the surface. The magnitude of this orientation was small and dependent on the size of the pendant functional group. Bulky functional groups hindered the surface orientation, leading to nearly unoriented surfaces. Depth dependent NEXAFS measurements demonstrated that the surface orientation was localized near the interface. Molecular dynamics simulations showed that the phenyl rings were not oriented strongly around a particular "average tilt angle". In contrast, simulations demonstrate that the phenyl rings exhibit a broad distribution of tilt angles, and that changes in the tilt angle distribution with pendant functionality give rise to the observed NEXAFS response. The more oriented samples exhibit a higher probability of phenyl ring orientation at angles greater than 60 degrees relative to the plane of the films surface.

Silk layering as studied with neutron reflectivity

Neutron reflectivity (NR) measurements of ultrathin surface films (below 30 nm) composed of Bombyx mori silk fibroin protein in combination with atomic force microscopy and ellipsometry were used to reveal the internal structural organization in both dry and swollen states. Reconstituted aqueous silk solution deposited on a silicon substrate using the spin-assisted layer-by-layer (SA-LbL) technique resulted in a monolayer silk film composed of random nanofibrils with constant scattering length density (SLD). However, a vertically segregated ordering with two different regions has been observed in dry, thicker, seven-layer SA-LbL silk films. The vertical segregation of silk multilayer films indicates the presence of a different secondary structure of silk in direct contact with the silicon oxide surface (first 6 nm). The layered structure can be attributed to interfacial β-sheet crystallization and the formation of well-developed nanofibrillar nanoporous morphology for the initially deposited silk surface layers with the preservation of less dense, random coil secondary structure for the layers that follow. This segregated structure of solid silk films defines their complex nonuniform behavior in the D(2)O environment with thicker silk films undergoing delamination during swelling. For a silk monolayer with an initial thickness of 6 nm, we observed the increase in the effective thickness by 60% combined with surprising decrease in density. Considering the nanoporous morphology of the hydrophobic silk layer, we suggested that the apparent increase in its thickness in liquid environment is caused by the air nanobubble trapping phenomenon at the liquid-solid interface.

Control of interface nanoscale structure created by plasma-enhanced chemical vapor deposition

Tailoring the structure of films deposited by plasma-enhanced chemical vapor deposition (PECVD) to specific applications requires a depth-resolved understanding of how the interface structures in such films are impacted by variations in deposition parameters such as feed position and plasma power. Analysis of complementary X-ray and neutron reflectivity (XR, NR) data provide a rich picture of changes in structure with feed position and plasma power, with those changes resolved on the nanoscale. For plasma-polymerized octafluorocyclobutane (PP-OFCB) films, a region of distinct chemical composition and lower cross-link density is found at the substrate interface for the range of processing conditions studied and a surface layer of lower cross-link density also appears when plasma power exceeds 40 W. Varying the distance of the feed from the plasma impacts the degree of cross-linking in the film center, thickness of the surface layer, and thickness of the transition region at the substrate. Deposition at the highest power, 65 W, both enhances cross-linking and creates loose fragments with fluorine content higher than the average. The thickness of the low cross-link density region at the air interface plays an important role in determining the width of the interface built with a layer subsequently deposited atop the first.

Polymeric structures at interfaces: An X-ray scattering study

X-ray scattering based on synchrotron radiation enables the detection of polymeric structures at interfaces despite the weak contrast between adjacent polymers build-up from different monomeric units. Variable types of polymeric structures result from typical pattern directing mechanisms, such as dewetting in case of homopolymer films, phase separation in polymer blend films, micro-phase separation in diblock copolymer films and surface enrichment in statistical copolymer films. The pattern directing mechanisms introduce structures ordered perpendicular and parallel to the polymeric surface. Consequently, specular and off-specular X-ray scattering is applied as demonstrated within examples. From scattering the characteristic structures which are not accessible by means of other techniques are determined. Limitations with respect to isolated objects such as holes are discussed.

Influence of Extrusion and Digestion on the Nanostructure of High-Amylose Maize Starch

An in-depth characterization of the structural changes undergone by high-amylose starch after extrusion and digestion with a pancreatic alpha-amylase has been carried out. The combination of USAXS, SAXS, XRD, and SEM techniques has provided a wide "picture" of the morphological transformations of starch, covering a length scale from approximately 0.3 nm to approximately 230 microm. Depending on the extrusion conditions, either gelatinization was attained ("mild" conditions) or single-amylose helix formation was induced ("extreme" conditions). SAXS experiments demonstrated that upon contacting the extruded materials with water, retrogradation took place. A new type of molecular organization with a characteristic repeat length of 5 nm was observed in the dry resistant starch fractions from the extruded high-amylose starch. The crystalline morphology of the resistant starch fractions, as observed by XRD, varied from B-type crystallinity for the "mild" extruded starch to a mixture of C- and V-type crystallinity in the case of "extreme" extrusion.

Surfactant displacement of human serum albumin adsorbed on loosely packed self-assembled monolayers: cetyltrimethylammonium bromide versus sodium dodecyl sulfate

The surfactants sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB) displace human serum albumin (HSA) from loosely packed self-assembled monolayers (SAM) of hydrophobic alkyl chains by different means. Removal of HSA is of interest because previous work has suggested that the adsorption of HSA to such loosely packed SAMs may be sufficiently tenacious to offer opportunities for surface passivation. While HSA remains on the surface after exposure to SDS and rinsing, no protein remains after exposure to CTAB and rinsing. X-ray reflectivity and X-ray photoelectron spectroscopy measurements indicate that CTAB molecules remain interdigitated in the loosely packed SAM after rinsing, suggesting that CTAB is more effective in removing the HSA because it interacts more strongly with the SAM.

Surface modification of Sylgard-184 poly(dimethyl siloxane) networks by ultraviolet and ultraviolet/ozone treatment

We report on the surface modification of Sylgard-184 poly(dimethyl siloxane) (PDMS) networks by ultraviolet (UV) radiation and ultraviolet/ozone (UVO) treatment. The effects of the UV light wavelength and ambient conditions on the surface properties of Sylgard-184 are probed using a battery of experimental probes, including static contact angle measurements, Fourier transform infrared spectroscopy, near-edge X-ray absorption fine structure, and X-ray reflectivity. Our results reveal that when exposed to UV, the PDMS macromolecules in the surface region of Sylgard-184 undergo chain scission, involving both the main chain backbone and the side groups. The radicals formed during this process recombine and form a network whose wetting properties are similar to those of a UV-modified model PDMS. In contrast to the UV radiation, the UVO treatment causes very significant changes in the surface and near-surface structure of Sylgard-184. Specifically, the molecular oxygen and ozone created during the UVO process interact with the UV-modified specimen. As a result of these interactions, the surface of the sample contains a large number of hydrophilic (mainly -OH) groups. In addition, the material density within the first approximately 5 nm reaches about 50% of that of pure silica. A major conclusion that can be drawn from the results and analysis described in this work is that the presence of the silica fillers in Sylgard-184 does not alter the surface properties of the UVO- and UV-modified Sylgard-184.

Investigation of the nanofibrillar morphology in silk fibers by small angle X-ray scattering and atomic force microscopy

Small angle X-ray scattering (SAXS) and atomic force microscopy (AFM) measurements have been shown to be consistent with the presence of nanofibrils in the cocoon silk of Bombyx mori and the dragline silk of Nephila clavipes. The transverse dimensions and correlation lengths range from >> 59 to 220 nm and in the axial direction from >> 80 to 230 nm. Also, the two-dimensional Fourier transforms of the height profiles of AFM topographic images of interior surfaces of B. mori follow a power law approximately the same as that for the Porod region of the SAXS data. In this manner, the AFM can be used to help remove ambiguity about the scatterers responsible for SAXS patterns.