A critical review on the spray drying of fruit extract: effect of additives on physicochemical properties

The Antioxidant Activity of Atomized Extracts of the Leaves and Stems of Cnidoscolus diacanthus (Pax & K. Hoffm.) J.F. Macbr. from Peru and Their Effect on Sex Hormone Levels in Rats

In this research, we aimed to determine the antioxidant activity of an atomized extract of Cnidoscolus diacanthus (Pax & K. Hoffm.) J.F. Macbr., known in Peru as "huanarpo hembra", and its effect on sex hormone levels. Its phytochemical profile was determined using liquid chromatography-mass spectrometry (LC-MS), while its total phenol content (TPC) and total flavonoids (TFs) were determined using the Folin-Ciocalteu method and the aluminum chloride method. Its antioxidant activity was determined using 2,2-diphenyl-1-picrylhydrazyl (DPPH), the radical 2,2-azino-bis-3-ethylbenzthiazolin-6 sulfonic acid (ABTS), and ferric-reducing antioxidant power (FRAP). The biological activity of C. diacanthus and its effect on sexual hormones were determined in Holtzman rats of both sexes. Phytochemical analysis revealed the presence of flavonoids and phenolic compounds in its leaves and stems, mainly rutin, quercetin, chlorogenic acid, and genistein. However, the stem extract contained higher total phenol (464.38 ± 4.40 GAE/g) and flavonoid (369.17 ± 3.16 mg QE/g of extract) contents than the leaf extract (212.38 ± 3.19 mg GAE/g and 121.49 ± 2.69 mg QE/g). For DPPH, ABTS, and FRAP, the Trolox-equivalent antioxidant capacity (TEAC) was 597.20 ± 5.40 µmol/g, 452.67 ± 5.76 µmol/g, and 535.91 ± 1.56 µmol/g, respectively, for the stems, while for the leaves, it was 462.39 ± 3.99 µmol/g, 202.32 ± 5.20 µmol/g, and 198.13 ± 1.44 µmol/g, respectively. In terms of the values for hormonal levels, at a dose of 100 mg/kg of the extract, testosterone levels of 1.430 ng/mL (with the leaf extract) and 1.433 ng/mL (with the stem extract), respectively, were found in the male rats. Regarding estradiol levels, in the female rats, these were 10.425 ng/mL (leaf extract) and 8.775 ng/mL (stem extract), while their levels of luteinizing hormone were 0.320 mIU/mL (leaf extract) and 0.273 mIU/mL (stem extract). For the follicle-stimulating hormone, levels of 0.858 mIU/mL (leaf extract) and 0.840 mIU/mL (stem extract) were found in the female rats, and levels of 0.220 mIU/mL (leaf extract) and 0.200 mIU/mL (stem extract) were found in the male rats. It is concluded that the C. diacanthus stem extract had a greater antioxidant capacity than the leaf extract, while both extracts had a superior effect on the sex hormone levels in the female rats compared to the male rats.

Exploring conventional and emerging dehydration technologies for slurry/liquid food matrices and their impact on porosity of powders: A comprehensive review

The contribution of dehydration to the growing market of food powders from slurry/liquid matrices is inevitable. To overcome the challenges posed by conventional drying technologies, several innovative approaches have emerged. However, industrial implementation is limited due to insufficient information on the best-suited drying technologies for targeted products. Therefore, this review aimed to compare various conventional and emerging dehydration technologies (such as active freeze, supercritical, agitated thin-film, and vortex chamber drying) based on their fundamental principles, potential applications, and limitations. Additionally, this article reviewed the effects of drying technologies on porosity, which greatly influence the solubility, rehydration, and stability of powder. The comparison between different drying technologies enables informed decision-making in selecting the appropriate one. It was found that active freeze drying is effective in producing free-flowing powders, unlike conventional freeze drying. Vortex chamber drying could be considered a viable alternative to spray drying, requiring a compact chamber than the large tower needed for spray drying. Freeze-dried, spray freeze-dried, and foam mat-dried powders exhibit higher porosity than spray-dried ones, whereas supercritical drying produces nano-porous interconnected powders. Notably, several factors like glass transition temperature, drying technologies, particle aggregation, agglomeration, and sintering impact powder porosity. However, some binders, such as maltodextrin, sucrose, and lactose, could be applied in controlled agglomeration to enhance powder porosity. Further investigation on the effect of emerging technologies on powder properties and their commercial feasibility is required to discover their potential in liquid drying. Moreover, utilizing clean-label drying ingredients like dietary fibers, derived from agricultural waste, presents promising opportunities.

Spray-Drying Microencapsulation of Bauhinia ungulata L. var. obtusifolia Aqueous Extract Containing Phenolic Compounds: A Comparative Study Using Different Wall Materials

Species belonging to the Bauhinia genus, usually known as "pata-de-vaca", are popularly used to treat diabetes. Bauhinia ungulata var. obtusifolia (Ducke) Vaz is among them, of which the leaves are used as a tea for medicinal purposes in the Amazon region. A microencapsulation study of lyophilized aqueous extract from Bauhinia ungulata leaves, which contain phenolic compounds, using five different wall materials (maltodextrin DE 4-7, maltodextrin DE 11-14; β-cyclodextrin; pectin and sodium carboxymethylcellulose) is described in this paper. The microstructure, particle size distribution, thermal behavior, yield, and encapsulation efficiency were investigated and compared using different techniques. Using high-performance liquid chromatography, phenolics, and flavonoids were detected and quantified in the microparticles. The microparticles obtained with a yield and phenolics encapsulation efficiency ranging within 60-83% and 35-57%, respectively, showed a particle size distribution between 1.15 and 5.54 µm, spherical morphology, and a wrinkled surface. Among them, those prepared with sodium carboxymethylcellulose or pectin proved to be the most thermally stable. They had the highest flavonoid content (23.07 and 21.73 mg RUTE/g Extract) and total antioxidant activity by both the DPPH (376.55 and 367.86 µM TEq/g Extract) and ABTS (1085.72 and 1062.32 µM TEq/g Extract) assays. The chromatographic analyses allowed for quantification of the following substances retained by the microparticles, chlorogenic acid (1.74-1.98 mg/g Extract), p-coumaric acid (0.06-0.08 mg/g Extract), rutin (11.2-12.9 mg/g Extract), and isoquercitrin (0.49-0.53 mg/g Extract), compounds which considered to responsible for the antidiabetic property attributed to the species.

Advances in spray-dried probiotic microcapsules for targeted delivery: a review

Probiotics have gained significant attention owing to their roles in regulating human health. Recently, spray drying has been considered as a promising technique to produce probiotic powders due to its advantages of high efficiency, cost-saving, and good powder properties. However, the severe environmental conditions from drying and digestion can significantly reduce cell viability, resulting in poor bioaccessibility and bioavailability of live cells. Therefore, there is a need to develop effective targeted delivery systems using spray drying to protect bacteria and to maintain their physiological functions in the targeted sites. This review highlights recent studies about spray-dried targeted delivery vehicles for probiotics, focusing on key strategies to protect bacteria when encountering external stresses, the formation mechanism of particles, the targeted release and colonization mechanisms of live cells in particles with different structures. Advances in the targeted delivery of live probiotics via spray-dried vehicles are still in their early stages. To increase the possibilities for industrialization and commercialization, functional improvement of microcapsules in terms of protection, targeted release, and colonization of bacteria, as well as the effect of spray drying on bacterial physiological functions in the host, need to be further investigated.

Antioxidant Potential of Spray- and Freeze-Dried Extract from Oregano Processing Wastes, Using an Optimized Ultrasound-Assisted Method

Origanum vulgare is recognized worldwide for its numerous applications, in the food industry and beyond. However, the extraction of its essential oils generates a significant amount of waste. The aim of this research was to achieve the valorization of solid waste from oregano hydro-distillation, by (i) optimizing the ultrasound extraction of antioxidants, (ii) evaluating the effect of spray and freeze drying on the extract's physicochemical properties, and (iii) characterizing the obtained powder by its antioxidant capacity. A central composite design of experiments was used to optimize the sample/solvent ratio, ethanol/water ratio, and extraction time. The extract was analyzed for its antioxidant potential by determining the percentage of DPPH inhibition, FRAP, and total phenolic content (TPC). The GAB model best fit the data for the moisture sorption isotherm of the resulting powder. The antioxidant activity of the powders was tested in a ground-beef food system. The TPC was maximized at times longer than 58 min, a sample/solvent ratio between 0.058 and 0.078, and a ratio of ethanol/water around 1. Neither drying method significantly affected the antioxidant properties of the extract, even though the resulting powders from each showed a different morphology (determined using SEM). Encapsulation with maltodextrin protected the spray-dried extract during a 6-month storage period. Powders from both drying methods equally retarded lipid oxidation, and were comparable to the synthetic antioxidant BHT. It is concluded that oregano processing waste is a potent source of antioxidants, and that its dried extract, via an ultrasound-assisted process, can potentially be used as a natural alternative to synthetic antioxidants.

Lycopene in Feed as Antioxidant and Immuno-Modulator Improves Broiler Chicken's Performance under Heat-Stress Conditions

Lycopene is a type of carotenoid pigment widely distributed in various plants and fruits, with tomatoes, carrots, and guava being the most abundant sources. Due to its high content of beneficial active components, lycopene has been used in medicine, where it is employed as a dietary additive for cancer therapy, immune modulator, and feed additive to improve livestock productivity. Lycopene is a lipophilic substance that can act as either a prooxidant or a free radical scavenger and is particularly efficient in enhancing broiler performance. Furthermore, lycopene can alleviate heat stress by improving the activity of various antioxidant enzymes such as superoxide dismutase (SOD), glutathione peroxidase (GSH-Px), and catalase (CAT), as well as increasing the total antioxidant capacity (T-AOC) and nuclear muscle factor erythroid 2-related factor 2 (Nrf2), while simultaneously reducing the levels of malondialdehyde (MDA) and muscle Keap1 expression. In addition, lycopene can improve broiler fertility by enhancing sperm performance and reducing inflammation by modulating the levels of interleukin 1, 2, and 10 (IL-1, IL-2, and IL-10) in cases of infection. In cases of disease by aflatoxin B1 (AFB1), lycopene can modulate interferon-γ (IFN-γ), IL-1, claudin-1 (CLDN-1), and zonula occludens-1 (ZO-1). Furthermore, under the lipopolysaccharide challenge, lycopene can increase the relative weights of immune organ indices such as the bursal, spleen, and thymus.

Powdered Beverage from Native Plants from Argentina (Zuccagnia punctata and Solanum betaceum) Obtained by Spray-Drying: A Promising Source of Antioxidant Compounds

In previous studies, the Argentinean native plants called Zuccagnia punctata (jarilla, pus pus, lata) and Solanum betaceum (chilto, tree tomato) were reported as new natural sources of antioxidant compounds, mainly chalcones, anthocyanins and rosmarinic acid derivates. The present study deals with the production of antioxidant beverages of Z. punctata (Zp) extract and chilto juice with honey as sweetener. A Zp extract and red chilto juice were obtained according to Food Code and characterized. The beverages were formulated by using maltodextrin (MD) with two dextrose equivalents (DE), 10 and 15, and then spray-dried at an inlet air temperature of 130 °C. The physicochemical, microscopical, phytochemical and functional characteristics of the powders were surveyed. The experiments carried out showed good physical properties for both formulations showing high water solubility with adequate features for handling, transport and storage. The chromatic parameters of both powdered beverages indicate orange-pink tones regardless of the wall material used. The total polyphenol and flavonoid content in the beverages were kept after spray-drying (92 and 100%, respectively). The anthocyanins were less stable under drying conditions (yield 58%). Both powdered beverages showed high scavenger capacity on ABTS^•+, HO^• and H₂O₂ (SC₅₀ between 3.29 to 41.05 µg GAE/mL) and were able to inhibit xanthine oxidase (XOD) activity (CI₅₀ between 91.35 and 114.43 µg GAE/mL). The beverages were neither toxic nor mutagenic in the concentration range with biological activity. The results obtained in the present work scientifically support the use of the powdered beverages of Argentinean native plants as antioxidant.

Polysaccharides as wall materials in spray-dried microencapsulation of bioactive compounds: Physicochemical properties and characterization

Natural bioactive compounds (BCs) are types of chemicals found in plants and certain foods that promote good health, however they are sensitive to processing and environmental conditions. Microencapsulation by spray drying is a widely used and cost-effective approach to create a coating layer to surround and protect BCs and control their release, enabling the production of high functional products/ingredients with extended shelf life. In this process, wall materials determine protection efficiency, and physical properties, bioavailability, and storage stability of microencapsulated products. Therefore, an understanding of physicochemical properties of wall materials is essential for the successful and effective spray-dried microencapsulation process. Typically, polysaccharide-based wall materials are generated from more sustainable sources and have a wider range of physicochemical properties and applications compared to their protein-based counterparts. In this review, we highlight the essential physicochemical properties of polysaccharide-based wall materials for spray-dried microencapsulation of BCs including solubility, thermal stability, and emulsifying properties, rheological and film forming properties. We provide further insight into possibilities for the chemical structure modification of native wall materials and their controlled release behaviors. Finally, we summarize the most recent studies involving polysaccharide biopolymers as wall materials and/or emulsifiers in spray-dried microencapsulation of BCs.

Biological Properties and Applications of Betalains

Betalains are water-soluble pigments present in vacuoles of plants of the order Caryophyllales and in mushrooms of the genera Amanita, Hygrocybe and Hygrophorus. Betalamic acid is a constituent of all betalains. The type of betalamic acid substituent determines the class of betalains. The betacyanins (reddish to violet) contain a cyclo-3,4-dihydroxyphenylalanine (cyclo-DOPA) residue while the betaxanthins (yellow to orange) contain different amino acid or amine residues. The most common betacyanin is betanin (Beetroot Red), present in red beets Beta vulgaris, which is a glucoside of betanidin. The structure of this comprehensive review is as follows: Occurrence of Betalains; Structure of Betalains; Spectroscopic and Fluorescent Properties; Stability; Antioxidant Activity; Bioavailability, Health Benefits; Betalains as Food Colorants; Food Safety of Betalains; Other Applications of Betalains; and Environmental Role and Fate of Betalains.

Therapeutic Application of Betalains: A Review

Anthocyanins, betalains, riboflavin, carotenoids, chlorophylls and caramel are the basic natural food colorants used in modern food manufacture. Betalains, which are composed of red–violet betacyanin and yellow betaxanthins, are water-soluble pigments that color flowers and fruits. Betalains are pigments primarily produced by plants of the order Caryophyllales. Because of their anti-inflammatory, cognitive impairment, anticancer and anti-hepatitis properties, betalains are useful as pharmaceutical agents and dietary supplements. Betalains also exhibit antimicrobial and antimalarial effects, and as an example, betalain-rich Amaranthus spinosus displays prominent antimalarial activity. Studies also confirmed the antidiabetic effect of betalains, which reduced glycemia by 40% without causing weight loss or liver impairment. These findings show that betalain colorants may be a promising alternative to the synthetic dyes currently used as food additives.

Chemical and Antioxidant Properties of Betalains

Betalains are vacuolar pigments composed of a nitrogenous core structure, betalamic acid. Betalamic acid condenses with imino compounds (cyclo-DOPA/its glucosyl derivates) or amino acids/derivates to form violet betacyanins and yellow betaxanthins. These pigments have gained the curiosity of scientific researchers in recent decades. Their importance was increased not only by market orientation toward natural colorants and antioxidants but also by their safety and health promoting properties. To date, about 78 betalains have been identified from plants of about 17 families. In this review, all of the identified pigments are presented, followed by a comprehensive discussion of their structure-activity relationship.

Formation and Mechanism of Superhydrophobic/Hydrophobic Surfaces Made from Amphiphiles through Droplet-Mediated Evaporation-Induced Self-Assembly

Superhydrophobic/hydrophobic surfaces have attracted wide attention because of their broad applications in various regions, including coating, textile, packaging, electronic devices, and bioengineering. Many studies have been focused on the fabrication of superhydrophobic/hydrophobic surfaces using natural materials. In this paper, superhydrophobic/hydrophobic surfaces were formed by an amphiphilic natural protein, zein, using electrospinning. Water contact angle (WCA) and scanning electron microscopy (SEM) were used to characterize the hydrophobicity and surface morphology of the electrospun structures. The highest WCA of the zein electrospun surfaces could reach 155.5 ± 1.4°. To further understand the mechanism of superhydrophobic surface formation from amphiphiles using electrospinning, a synthetic amphiphilic polymer was selected, and also, a method similar to electrospinning, spray drying, was tried. The electrospun amphiphilic polymer surface showed a high hydrophobicity with a WCA of 141.4 ± 0.7°. WCA of the spray-dried zein surface could reach 125.3 ± 2.1°. The secondary structures of the zein in the electrospun film and cast-dried film were studied using ATR-FTIR, showing that α-helix to β-sheet transformation happened during the solvent evaporation in the cast drying process but not in the electrospinning process. A formation mechanism was proposed on the basis of the orientation of the amphiphiles during the solvent evaporation of different fabrication methods. The droplet-based or jet-based evaporation during electrospinning and spray drying led to the formation of the superhydrophobic/hydrophobic surface by the accumulation of the hydrophobic groups of the amphiphiles on the surface, while the surface-based evaporation during cast drying led to the formation of the hydrophilic surface by the accumulation of the hydrophilic groups of the amphiphiles on the surface.