Green and clean modification of cassava starch - effects on composition, structure, properties and digestibility

A review of green methods used in starch-polyphenol interactions: physicochemical and digestion aspects

The interactions of starch with lipids, proteins, and other major food components during food processing are inevitable. These interactions could result in the formation of V-type or non-V-type complexes of starch. The starch-lipid complexes have been intensively studied for over five decades, however, the complexes of starch and polyphenols are relatively less studied and are the subject of recent interest. The interactions of starch with polyphenols can affect the physicochemical properties and its digestibility. The literature has highlighted several green methods such as ultrasound, microwave, high pressure, extrusion, ball-milling, cold plasma etc., to assist interactions of starch with polyphenols. However, comprehensive information on green methods to induce starch-polyphenol interactions is still scarce. Therefore, in light of the importance and potential of starch-polyphenol complexes in developing functional foods with low digestion, this review has summarized the novel green methods employed in interactions of starch with flavonoids, phenolic acids and tannins. It has been speculated that flavonoids, phenolic acids, and tannins, among other types of polyphenols, may have anti-digestive activities and are also revealed for their interaction with starch to form either an inclusion or non-inclusion complex. Further information on the effects of these interactions on physicochemical parameters to understand the chemistry and structure of the complexes is also provided.

Hydrothermal processes and simultaneous enzymatic hydrolysis in the production of modified cassava starches with porous-surfaces

The amylolytic action of α-amylase and amyloglucosidase has been directly implemented in native cassava starches for the formation of cassava microporous granules with unsatisfactory results, however, its incidence in hydrothermally treated granules has never been evaluated. The effect of hydrothermal processes and simultaneous enzymatic hydrolysis on the physicochemical, morphological and structural properties of native cassava starch was evaluated. Native cassava starch presented a rigid, smooth surface, and was exempt from porosities, whereas hydrothermal processes altered the semicrystalline order and increasing the size and number of pores and increasing the size (4.11 ± 0.09 nm) and volume of pores (0.82 ± 0.00 cm3/g × 10-3). The hydrothermal action followed by enzymatic processes with α-amylase and amyloglucosidase, augmented the processes of internal degradation (endo-erosion) and pore widening (exo-erosion), improving the hydrophilic properties compared to the hydrothermal treatment. Likewise, the hydrothermally process followed by enzymatic hydrolysis for 24 h (HPS + EMS-24) increased the degradation of the amorphous lamellae, consistent with a significant decrease in amylose content. This same dual treatment increased the pore size at 17.68 ± 0.13 nm relative to the native counterpart; therefore, they are considered an effective method in the development of modified cassava starches with porous surfaces.

Antioxidant and antibacterial activities of a polysaccharide produced by Chaetomium globosum CGMCC 6882

In the present work, a Gynostemma pentaphyllum herb endophytic fungus of Chaetomium globosum CGMCC 6882 polysaccharide produced from tapioca starch (GCP-TS) with submerged fermentation was analyzed. GCP-TS contains rhamnose, glucosamine, galactose, glucose, mannose, and glucuronic acid in the molar ratio of 6.29: 0.55: 1.12: 22.93: 10.94: 3.54. Its weight-average molecular weight, number-average molecular weight and polydispersity were 4.73 × 10⁴ Da, 4.29 × 10⁴ Da and 1.103, respectively. Antioxidant results showed that GCP-TS had a concentration-dependent scavenging ability against DPPH radical, superoxide anion, hydroxyl radical, and ABTS radical. The corresponding scavenging capacities of GCP-TS aqueous solution at the concentration of 1.0 mg/mL were 45.11 ± 2.52, 43.58 ± 1.97, 36.27 ± 2.48, and 34.39 ± 2.06 %, respectively. Antibacterial activities of GCP-TS against Staphylococcus aureus and Escherichia coli were enhanced with the increase in its concentration, and its bacteriostatic activity against S. aureus was stronger than that against E. coli.

Effect of Dry Heating on Some Physicochemical Properties of Protein-Coated High Amylose and Waxy Corn Starch

The dry heat treatment (DHT) of starch and hydrocolloid mixtures is gaining acknowledgement since hydrocolloids can enhance the efficiency of DHT. However, the DHT of a starch-protein mixture has been less investigated. In this study, the effects of different proteins including sodium caseinate (SC), gelatin, and whey protein isolate (WPI) added to high amylose and waxy corn starches (HACS and WCS, respectively) prepared by the dry mixing and wet method before and after DHT were studied. The DHT of both starches with WPI and SC prepared by the wet method increased the peak viscosity, but no change was observed when gelatin was added. Dry mixing of HACS with the proteins did not affect the peak viscosity before and after DHT. The gelatinization temperatures and enthalpy of both starches showed a slight decrease with the addition of all proteins and reduced further after DHT. The firmness, gumminess, and cohesiveness of the samples decreased upon DHT. The SEM results revealed that the granules were coated by proteins and formed clusters. Particle size analysis showed an increase in the particle size with the addition of proteins, which reduced after DHT. Under the conditions used, the wet method was more successful than dry mixing and the effects of WPI > SC > gelatin in enhancing the physicochemical properties of the tested starches after DHT.

Starch as edible ink in 3D printing for food applications: a review

Three-dimensional (3D) printing has attracted more attention in food industry because of its potential advantages, including the ability to create customized products according to individual's sensory or nutritional requirements. However, the production of high-quality 3D printed foods requires the availability of edible bio-inks with the required physicochemical and sensory attributes. Starch, as one of the important sources of dietary energy, is widely used in food processing and is considered as one kind of versatile polymers. It is not only because starch has low prices and abundant sources, but also because desirable modified starch can be obtained by altering its physicochemical properties through physical, chemical and enzymatic methods. This article focuses on the utilization of starch as materials to create food-grade bio-inks. Initially, several kinds of commonly used 3D printers are discussed. The factors affecting the printing quality of starch-based materials and improvement methods are then reviewed, as well as areas where future researches are required. The applications of 3D printed starch-based materials in food industry are also introduced. Overall, starch appears to be one kind of useful substances for creating edible bio-inks that can be utilized within 3D food printing applications to create a wide variety of food products.

Recent advances in starch-based magnetic adsorbents for the removal of contaminants from wastewater: A review

Considerable concern exists regarding water contamination by various pollutants, such as conventional pollutants (e.g., heavy metals and organics) and emerging micropollutants (e.g., consumer care products and interfering endocrine-related compounds). Currently, academics are continuously exploring sustainability-related materials and technologies to remove contaminants from wastewater. Magnetic starch-based adsorbents (MSAs) can combine the advantages of starch and magnetic nanoparticles, which exhibit unique critical features such as availability, cost-effectiveness, size, shape, crystallinity, magnetic properties, stability, adsorption properties, and excellent surface properties. However, limited reviews on MSAs' preparations, characterizations, applications, and adsorption mechanisms could be available nowadays. Hence, this review not only focuses on their activation and preparation methods, including physical (e.g., mechanical activation treatment, microwave radiation treatment, sonication, and extrusion), chemical (e.g., grafting, cross-linking, oxidation and esterification), and enzymatic modifications to enhance their adsorption properties, but also offers an all-round state-of-the-art analysis of the full range of its characterization methods, the adsorption of various contaminants, and the underlying adsorption mechanisms. Eventually, this review focuses on the recycling and reclamation performance and highlights the main gaps in the areas where further studies are warranted. We hope that this review will spark an interdisciplinary discussion and bring about a revolution in the applications of MSAs.

Development changes in multi-scale structure and functional properties of waxy corn starch at different stages of kernel growth

Waxy corn starch is widely used in food and papermaking industries due to its unique properties. In this work, the structural and functional properties of starch isolated from waxy corn at different stages of kernel growth were investigated and their relationships were clarified. The results showed that with kernel growth, the surface of starch granules became smooth gradually, and the inner growth rings and the porous structure grew and became clear. Meanwhile, the weight-average molecular mass (M_w), root mean square radius (R_g), and average particle size increased while the amylose content decreased, which should account for the decreased pasting temperature (from 71.37 to 67.44 °C) and increased peak viscosity (1574.2 to 1883.1 cp) and breakdown value observed. Besides, the contents of slowly digestible starch (SDS) and resistant starch (RS) in waxy corn starch decreased significantly (from 44.01% to 40.88% and from 16.73% to 9.80%, respectively, p < 0.05) due to decreases in the double helix content, crystallinity, and structural order, and increases in the semi-crystalline lamellae thickness and the amorphous content. This research provides basic data for the rational utilization of waxy corn starch at different stages of kernel growth.