Upconversion luminescent nanomaterials: A promising new platform for food safety analysis

Synthesis of dual models multivalent activatable aptamers based on HCR and RCA for ultrasensitive detection of Salmonella typhimurium

Aptamers have superior structural properties and have been widely used in bacterial detection methods. However, the problem of low affinity still exists in complex sample detection. In contrast, hybridization chain reaction (HCR)-based model I and rolling circle amplification (RCA)-based model II multivalent activatable aptamers (multi-Apts) can fulfill the need for low-cost, rapid, highly sensitive and high affinity detection of S. typhimurium. In our research, two models of multi-Apts were designed. First, a monovalent activatable aptamer (mono-Apt) was constructed by fluorescence resonance energy transfer (FRET) with an S. typhimurium aptamer and its complementary chain of BHQ1. Next, the DNA scaffold was obtained by HCR and RCA, and the multi-Apts were obtained by self-assembly of the mono-Apt with a DNA scaffold. In model I, when target was presented, the complementary chain BHQ1 was released due to the binding of multi-Apts to the target and was subsequently adsorbed by UIO66. Finally, a FRET-based fluorescence detection signal was obtained. In mode II, the multi-Apts bound to the target, and the complementary chain BHQ1 was released to become the trigger chain for the next round of amplification of HCR with a fluorescence detection signal. HCR and RCA based multi-Apts were able to detect S. typhimurium as low as 2 CFU mL-1 and 1 CFU mL-1 respectively. Multi-Apts amplification strategy provides a new method for early diagnosis of pathogenic microorganisms in foods.

Natural and polyanionic heparin polysaccharide functionalized upconversion nanoparticles for highly sensitive and selective ratiometric detection of pesticide

Pesticide contamination is a global concern, threatening human health and food safety. Herein, we developed heparin (HEP) functionalized upconversion nanoparticles (UCNPs)-based ratiometric nanosensor for the sensitive detection of 2,6-dichloro-4-nitroaniline (DCN) pesticide via inner filter effect. The strategy for HEP functionalization of UCNPs is based on adjusting the surface potentials of UCNPs with polyanionic HEP through the electrostatic interaction. UCNPs (NaYbF4:Gd/Y/Tm@NaYbF4@NaYF4) was designed with core-shell-shell structure and extra sensitizer layer for efficient and strong upconversion luminescence (UCL) in the range of UV to NIR. After incorporation of DCN, the upconverted UV emission of UCNPs-HEP ratiometric nanosensor was considerably quenched with the NIR UCL at 800 nm remaining unchanged as internal standard. The UCNPs-HEP ratiometric nanosensor can achieve outstandingly selective and sensitive detection of DCN at the wide linear range of 5-300 μM with a detection limit of 0.41 μM. The remarkable applicability of the UCNPs-HEP ratiometric nanosensor was verified in apple, cucumber and grapes samples. The developed UCNPs-HEP ratiometric nanosensor with excellent biocompatibility and water dispersion capability, is promising for convenient, selective and sensitive sensing of DCN towards food and aqueous samples.

Sensitive detection of choline and nicotine in real samples by switching upconversion luminescence

Nicotine (3-(1-methyl-2-pyrrolidinyl)pyridine) is one of the most common addictive substances, causing the trace detection of nicotine to be very necessary. Herein, we designed and prepared a functionalized nanocomposite CS-PAA (NaYF4:19.5%Yb,0.5%Tm@NaYF4-PAA) using a simple method. The nicotine concentration was quantitatively detected through the inhibition of choline oxidase activity by nicotine and the luminescence intensity of CS-PAA being quenched by Fe3+. The mechanism of Fe3+ quenching CS-PAA emission was inferred by luminescence lifetime and UV-vis absorption spectra characterization. During the nicotine detection, both excitation (980 nm) and emission (802 nm) wavelengths of CS-PAA enable the avoidance of the interference of background fluorescence in complicated food objects, thus providing high selectivity and sensitivity with a linear range of 5-750 ng/mL and a limit of detection of 9.3 nM. The method exhibits an excellent recovery and relative standard deviation, indicating high accuracy and repeatability of the detection of nicotine.

Advances in Aptamer-Based Conjugate Recognition Techniques for the Detection of Small Molecules in Food

Small molecules are significant risk factors for causing food safety issues, posing serious threats to human health. Sensitive screening for hazards is beneficial for enhancing public security. However, traditional detection methods are unable to meet the requirements for the field screening of small molecules. Therefore, it is necessary to develop applicable methods with high levels of sensitivity and specificity to identify the small molecules. Aptamers are short-chain nucleic acids that can specifically bind to small molecules. By utilizing aptamers to enhance the performance of recognition technology, it is possible to achieve high selectivity and sensitivity levels when detecting small molecules. There have been several varieties of aptamer target recognition techniques developed to improve the ability to detect small molecules in recent years. This review focuses on the principles of detection platforms, classifies the conjugating methods between small molecules and aptamers, summarizes advancements in aptamer-based conjugate recognition techniques for the detection of small molecules in food, and seeks to provide emerging powerful tools in the field of point-of-care diagnostics.

Highly water-soluble and biocompatible hyaluronic acid functionalized upconversion nanoparticles as ratiometric nanoprobes for label-free detection of nitrofuran and doxorubicin

Antibiotic detection is crucial and challenging because the widespread consumption of antibiotics has shown extensive harmful effects on food, environment and human health. Here, we propose highly water-soluble and biocompatible hyaluronic acid (HYA) functionalized upconversion nanoparticles (UCNPs) for ratiometric detection of multiple antibiotics. The ultraviolet upconversion luminescence (UCL) from UCNPs was significantly quenched by nitrofurazone (NFZ)/nitrofurantoin (NFT), and blue UCL was quenched by doxorubicin (DOX), while red UCL remained unchanged for internal reference. The UCNPs-HYA nanoprobes exhibit excellently sensitive and selective NFZ, NFT and DOX detection in linear range of 2.5-100 μM, 2.5-80 μM, and 2.5-200 μM with the LOD at 0.28 μM (55 μg/kg), 0.20 μM (48 μg/kg) and 0.17 μM (97 μg/kg), respectively. The nanoprobes achieved detecting real samples of NFZ in lake water, liquid milk and chicken meat with satisfactory results, and UCL bioimaging of DOX in HeLa cells. The UCNPs-HYA ratiometric nanoprobes are promising for food samples detection and potential biosensing in the cellular environment.

Resonance-Based Sensing of Magnetic Nanoparticles Using Microfluidic Devices with Ferromagnetic Antidot Nanostructures

We demonstrated resonance-based detection of magnetic nanoparticles employing novel designs based upon planar (on-chip) microresonators that may serve as alternatives to conventional magnetoresistive magnetic nanoparticle detectors. We detected 130 nm sized magnetic nanoparticle clusters immobilized on sensor surfaces after flowing through PDMS microfluidic channels molded using a 3D printed mold. Two detection schemes were investigated: (i) indirect detection incorporating ferromagnetic antidot nanostructures within microresonators, and (ii) direct detection of nanoparticles without an antidot lattice. Using scheme (i), magnetic nanoparticles noticeably downshifted the resonance fields of an antidot nanostructure by up to 207 G. In a similar antidot device in which nanoparticles were introduced via droplets rather than a microfluidic channel, the largest shift was only 44 G with a sensitivity of 7.57 G/ng. This indicated that introduction of the nanoparticles via microfluidics results in stronger responses from the ferromagnetic resonances. The results for both devices demonstrated that ferromagnetic antidot nanostructures incorporated within planar microresonators can detect nanoparticles captured from dispersions. Using detection scheme (ii), without the antidot array, we observed a strong resonance within the nanoparticles. The resonance's strength suggests that direct detection is more sensitive to magnetic nanoparticles than indirect detection using a nanostructure, in addition to being much simpler.

CRISPR/Cas System: The Accelerator for the Development of Non-nucleic Acid Target Detection in Food Safety

Non-nucleic acid targets have posed a serious challenge to food safety. The detection of non-nucleic acid targets can enable us to monitor food contamination in a timely manner. In recent years, the CRISPR/Cas system has been extensively explored in biosensing. However, there is a lack of a summary of CRISPR/Cas-powered detection tailored to non-nucleic acid targets involved in food safety. This review comprehensively summarizes the recent advances on the construction of CRISPR/Cas-powered detection and the promising applications in the field of food safety related non-nucleic acid targets. The current challenges and futuristic perspectives are also proposed accordingly. The rapidly evolving CRISPR/Cas system has provided a powerful propellant for non-nucleic acid target detection via integration with aptamer and/or DNAzyme. Compared with traditional analytical methods, CRISPR/Cas-powered detection is conceptually novel, essentially eliminates the dependence on large instruments, and also demonstrates the capability for rapid, accurate, sensitive, and on-site testing.

Core-Shell-Shell Upconversion Nanomaterials Applying for Simultaneous Immunofluorescent Detection of Fenpropathrin and Procymidone

This study synthesized the NaGdF4@NaGdF4: Yb, Tm@NaGdF4: Yb, Nd upconversion nanoparticles (UCNPs), combined with another three-layer structure NaYF4@NaYF4: Yb, Er@NaYF4 UCNPs, with a core-shell-shell structure, effectively suppressing fluorescence quenching and significantly improving upconversion luminescence efficiency. Two types of modified UCNPs were coupled with antibodies against fenpropathrin and procymidone to form signal probes, and magnetic nanoparticles were coupled with antigens of fenpropathrin and procymidone to form capture probes. A rapid and sensitive fluorescence immunoassay for the simultaneous detection of fenpropathrin and procymidone was established based on the principle of specific binding of antigen and antibody and magnetic separation technology. Under the optimal competitive reaction conditions, different concentrations of fenpropathrin and procymidone standards were added to collect the capture probe-signal probe complex. The fluorescence values at 542 nm and 802 nm were measured using 980 nm excitation luminescence. The results showed that the detection limits of fenpropathrin and procymidone were 0.114 µg/kg and 0.082 µg/kg, respectively, with sensitivities of 8.15 µg/kg and 7.98 µg/kg, and they were applied to the detection of fenpropathrin and procymidone in tomatoes, cucumbers, and cabbage. The average recovery rates were 86.5~100.2% and 85.61~102.43%, respectively, with coefficients of variation less than 10%. The results showed good consistency with the detection results of high-performance liquid chromatography, proving that this method has good accuracy and is suitable for the rapid detection of fenpropathrin and procymidone in food.

Erbium-ytterbium containing upconversion mesoporous bioactive glass microspheres for tissue engineering: luminescence monitoring of biomineralization and drug release

The development of functional biomaterials with real-time monitoring of mineralization processes, drug release and biodistribution has potential applications but remains an unsolved challenge. Herein, erbium- and ytterbium- containing mesoporous bioactive glass microspheres (MBGs:Er/Yb) with blue and red emission at an excitation wavelength of 980 nm were synthesized by a sol-gel combined with organic template method. As the concentration of Yb3+ ions gradually increases, the emission intensity of the MBGs:Er/Yb exhibits a clear concentration quenching effect. Combined with in vitro bioactivity tests, the optimal molar ratio of Er3+/Yb3+ was determined to be 4:3. Therefore, MBGs:4Er/3Yb was selected for in vitro biomineralization and drug release monitoring. The results of biomineralization monitoring show that the upconversion luminescence intensity is closely related to the degree of biomineralization. The upconversion luminescence intensity of MBGs:4Er/3Yb is quenched with the increase of the degree of biomineralization. The degree of luminescence quenching during biomineralization can be semiquantized. Drug release monitoring experiments showed that the anticancer drug doxorubicin hydrochloride (DOX) was successfully loaded into MBGs:4Er/3Yb and selectively quenched the green emission. When DOX was released, the green emission recovered stably, and It/I0 increased gradually. Moreover, there was a linear relationship between It/I0 and cumulative drug release, indicating that DOX-MBGs:4Er/3Yb is highly sensitive to DOX release, and monitoring the It/I0 values of DOX-MBGs:4Er/3Yb can achieve real-time tracking of the DOX release process to a certain extent. In conclusion, MBGs:4Er/3Yb has potential application as an upconversion luminescence biomonitoring material in the field of bone tissue engineering. STATEMENT OF SIGNIFICANCE: Mesoporous bioactive glasses have great potential for applications in bone tissue repair due to their excellent biological properties, but the effective information of the repair process cannot be grasped in a timely manner. Therefore, real-time monitoring of mineralization and drug release processes will be beneficial to obtain the degree of healing and optimize the amount and distribution of drugs to improve targeted therapeutic effects. For biomaterials, in vitro biological properties determine their biological properties in vivo, where the environment is more complex and diverse, and thus in vitro biomonitoring is particularly crucial. The organic combination of physical properties and biological properties will also provide a feasible idea for the development of biomaterials.

Recent advances of food safety detection by nucleic acid isothermal amplification integrated with CRISPR/Cas

Food safety problems have become one of the most important public health issues worldwide. Therefore, the development of rapid, effective and robust detection is of great importance. Amongst a range of methods, nucleic acid isothermal amplification (NAIA) plays a great role in food safety detection. However, the widespread application remains limited due to a few shortcomings. CRISPR/Cas system has emerged as a powerful tool in nucleic acid detection, which could be readily integrated with NAIA to improve the detection sensitivity, specificity, adaptability versatility and dependability. However, currently there was a lack of a comprehensive summary regarding the integration of NAIA and CRISPR/Cas in the field of food safety detection. In this review, the recent advances in food safety detection based on CRISPR/Cas-integrated NAIA were comprehensively reviewed. To begin with, the development of NAIA was summarized. Then, the types and working principles of CRISPR/Cas were introduced. The applications of the integration of NAIA and CRISPR/Cas for food safety were mainly introduced and objectively discussed. Lastly, current challenges and future opportunities were proposed. In summary, this technology is expected to become an important approach for food safety detection, leading to a safer and more reliable food industry.

Peptide hydrogels: Synthesis, properties, and applications in food science

Due to the unique and excellent biological, physical, and chemical properties of peptide hydrogels, their application in the biomedical field is extremely wide. The applications of peptide hydrogels are closely related to their unique responsiveness and excellent properties. However, its defects in mechanical properties, stability, and toxicity limit its application in the food field. In this review, we focus on the fabrication methods of peptide hydrogels through the physical, chemical, and biological stimulations. In addition, the functional design of peptide hydrogels by the incorporation with materials is discussed. Meanwhile, the excellent properties of peptide hydrogels such as the stimulus responsiveness, biocompatibility, antimicrobial properties, rheology, and stability are reviewed. Finally, the application of peptide hydrogel in the food field is summarized and prospected.

The Coming of Age of Neodymium: Redefining Its Role in Rare Earth Doped Nanoparticles

Among luminescent nanostructures actively investigated in the last couple of decades, rare earth (RE³⁺) doped nanoparticles (RENPs) are some of the most reported family of materials. The development of RENPs in the biomedical framework is quickly making its transition to the ∼800 nm excitation pathway, beneficial for both in vitro and in vivo applications to eliminate heating and facilitate higher penetration in tissues. Therefore, reports and investigations on RENPs containing the neodymium ion (Nd³⁺) greatly increased in number as the focus on ∼800 nm radiation absorbing Nd³⁺ ion gained traction. In this review, we cover the basics behind the RE³⁺ luminescence, the most successful Nd³⁺-RENP architectures, and highlight application areas. Nd³⁺-RENPs, particularly Nd³⁺-sensitized RENPs, have been scrutinized by considering the division between their upconversion and downshifting emissions. Aside from their distinctive optical properties, significant attention is paid to the diverse applications of Nd³⁺-RENPs, notwithstanding the pitfalls that are still to be addressed. Overall, we aim to provide a comprehensive overview on Nd³⁺-RENPs, discussing their developmental and applicative successes as well as challenges. We also assess future research pathways and foreseeable obstacles ahead, in a field, which we believe will continue witnessing an effervescent progress in the years to come.

Enabling the Polymer Circular Economy: Innovations in Photoluminescent Labeling of Plastic Waste for Enhanced Sorting

It is widely accepted that moving from a linear to circular economy for plastics will be beneficial to reduce plastic pollution in our environment and to prevent loss of material value. However, challenges within the sorting of plastic waste often lead to contaminated waste streams that can devalue recyclates and hinder reprocessing. Therefore, the improvement of the sorting of plastic waste can lead to dramatic improvements in recyclate quality and enable circularity for plastics. Here, we discuss current sorting methods for plastic waste and review labeling techniques to enable enhanced sorting of plastic recyclates. Photoluminescent-based labeling is discussed in detail, including UV-vis organic and inorganic photoluminescent markers, infrared up-conversion, and X-ray fluorescent markers. Methods of incorporating labels within packaging, such as extrusion, surface coatings, and incorporation within external labels are also discussed. Additionally, we highlight some practical models for implementing some of the sorting techniques and provide an outlook for this growing field of research.

Biotin-labelled peptidomimetic for competitive time-resolved fluoroimmunoassay of benzothiostrobin

In recent years, more and more functional peptide ligands have been identified from phage display libraries and served the immunoassay of small molecules. After the identification, the phage particle instead limits further application of peptide ligands, so it is of great significance to explore the peptide ligand as an independent detection reagent. In this work, the identified peptidomimetic of benzothiostrobin was synthesized and labelled with biotin, which was combined with Eu³⁺-labelled streptavidin to develop the peptide-based time-resolved fluoroimmunoassay (P-TRFIA). Under the optimal conditions, the half-maximum inhibitory concentration (IC₅₀) of proposed P-TRFIA is 3.63 ng mL^-1, which is similar to the TRFIA using phage-borne peptidomimetic and Eu³⁺-labelled anti-phage antibody (IC₅₀: 4.55 ng mL^-1), also more sensitive than previously reported immunoassays for benzothiostrobin. In addition, the proposed P-TRFIA shows excellent specificity and accuracy for analysis of spiked samples, and its detection results shows good consistency with high-performance liquid chromatography for the detection of environment and agro-products samples with unknown benzothiostrobin concentrations.

Advanced screening and tailoring strategies of pesticide aptamer for constructing biosensor

The rapid development of aptamers has helped address the challenges presented by the wide existed pesticides contaminations. Screening of aptamers with excellent performance is a prerequisite for successfully constructing biosensors, while further tailoring of aptamers with enhanced activity greatly improved the assay performance. Firstly, this paper reviewed the advanced screening strategies for pesticides aptamers, including immobilization screening that preserves the native structures of targets, non-immobilized screening based on nanomaterials, capillary electrophoresis-systematic evolution of ligands by exponential enrichment (CE-SELEX), virtual screening in silico, high-throughput selection, and rational secondary library generation methods, which contributed significantly to improve the success rate of screening, reduce the screening time, and ensure aptamer binding affinity. Secondly, the precise tailoring strategies for pesticides aptamers were modularly elaborated, containing deletion, splitting, elongation, and fusion, which provided various advantages like cost-efficiency, enhanced binding affinity, and new derived functional motifs. Thirdly, the developed aptamer-based biosensors (aptasensors) for pesticide detection were systematically reviewed according to the different signal output modes. Finally, the challenges and future perspectives of pesticide detection are discussed comprehensively.

Microwave-assisted synthesis and upconversion luminescence of NaYF4:Yb, Gd, Er and NaYF4:Yb, Gd, Tm nanorods

Anisotropic rare-earth ion (RE3+) doped fluoride upconversion particles are emerging as a potential candidate in diverse areas, ranging from biomedical imaging to photonics. Here, we develop a facile strategy to synthesize NaYF4:Yb, Er, Gd and NaYF4:Yb, Tm, Gd upconversion nanorods via microwave synthesis route by controlling the synthesis time and compared the optical properties of similar nanorods prepared via solvothermal technique. With the increase in synthesis time, the phase of the particle was found to change from mixed-phase to purely hexagonal and the morphology of the particles change the mixed phase of spherical and rod-shaped particles to completely nanorods for a synthesis time of 60 minutes. Further, the intrinsically hydrophobic particles changed to hydrophilic by removal of oleic capping via acid treatment and the amine-functionalized silica coating. The upconversion luminescence, as well as laser power-dependent emission properties of the surface-modified particles, elucidate that the surface modification route influence the upconversion luminescence as well as solvent-dependent emission properties. Moreover, the laser power-dependent studies elucidate that the upconversion process in a multi-photon process.