Recent progress in bio-inspired biofilm-resistant polymeric surfaces

Antibacterial and antibiofilm activities of ZIF-67

Currently, antibiotic-resistant bacteria represent a serious threat to public health worldwide. Biofilm formation potentiates both virulence and antibiotic resistance of bacteria. Therefore, the discovery of new antibacterial and antibiofilm compounds is an issue of paramount importance to combat and prevent hard-to-treat bacterial infections. Zeolitic-imidazolate-frameworks (ZIFs) are metallo-organic compounds known to have various interesting chemical and biological applications, including antibacterial properties. In this study, we synthesized ZIF-67 nanoparticles, formed by imidazolate anions and cobalt cations, and found that they inhibit the growth of Acinetobacter baumannii, Pseudomonas aeruginosa, and Staphylococcus aureus. Sub-inhibitory concentrations of ZIF-67 were also able to significantly reduce the biomass of pre-established biofilms of these pathogenic bacteria. On the other hand, the ZIF-67 nanoparticles had null or low cytotoxicity in mammalian cells at those concentrations showing antibacterial or antibiofilm activities. Thus, our results reveal the potential of ZIF-67 nanoparticles to be used against pathogenic bacteria.

Modification of Polydiallyldimethylammonium Chloride with Sodium Polystyrenesulfonate Dramatically Changes the Resistance of Polymer-Based Coatings towards Wash-Off from Both Hydrophilic and Hydrophobic Surfaces

Polymer coatings based on polycations represent a perspective class of protective antimicrobial coatings. Polydiallyldimethylammonium chloride (PDADMAC) and its water-soluble complexes with sodium polystyrenesulfonate (PSS) were studied by means of dynamic light-scattering, laser microelectrophoresis and turbidimetry. It was shown that addition of six mol.% of polyanion to polycation results in formation of interpolyelectrolyte complex (IPEC) that was stable towards phase separation in water-salt media with a concentration of salts (NaCl, CaCl₂, Na₂SO₄, MgSO₄) up to 0.5 M. Most of the polyelectrolyte coatings are made by layer-by-layer deposition. The utilization of water-soluble IPEC for the direct deposition on the surface was studied. The coatings from the PDADMAC and the PSS/PDADMAC complex were formed on the surfaces of hydrophilic glass and hydrophobic polyvinylchloride. It was found that formation IPEC allows one to increase the stability of the coating towards wash-off with water in comparison to individual PDADMAC coating on both types of substrates. The visualization of the coatings was performed by atomic force microscopy and scanning electron microscopy.

Development and characterization of anti-biofilm coatings applied by Non-Equilibrium Atmospheric Plasma on stainless steel

Biofilm-mediated microbial persistence of pathogenic and spoilage bacteria is a serious problem in food industries. Due to the difficulty of removing mature biofilms, great efforts are being made to find new strategies to prevent bacterial adherence to surfaces, the first step for biofilm development. In this study, coatings of (3-aminopropyl)triethoxysilane (APTES), tetraethyl orthosilicate (TEOS) and acrylic acid (AA) were applied by Non-Equilibrium Atmospheric Plasma on stainless steel (SS) AISI 316, the SS most commonly used in food industry equipment. Their anti-biofilm activity was assessed against Listeria monocytogenes CECT911 and Escherichia coli CECT515 after incubation at 37 °C. The best results were obtained for L. monocytogenes, with coatings consisting of a base coating of APTES and a functional coating of TEOS (AP10 + TE6) or AA (AP10 + AA6) that reduced biofilm production by 45% and 74%, respectively, when compared with the uncoated SS. These coatings were further characterized, together with a variation of the best one that replaced the acrylic acid with succinic acid (AP10 + SA6). Their anti-biofilm activity was assessed under different incubation conditions, including two strains of L. monocytogenes isolated from processing environments of a meat industry. The coating AP10 + AA6 reduced the biofilm formation by 90% after incubation at 12 °C, a temperature more representative of those commonly found in food processing environments. The morphological and physico-chemical characterization of the selected coatings showed that the coating with the highest anti-biofilm activity (i.e., AP10 + AA6) had lower surface roughness and higher hydrophilicity. This suggests that the formation of a hydration layer prevents the adherence of L. monocytogenes, an effect that seems to be enhanced by low temperature conditions, when the wettability of the strains is increased.

Rapid preparation and antimicrobial activity of polyurea coatings with RE-Doped nano-ZnO

The recent COVID-19 virus has led to a rising interest in antimicrobial and antiviral coatings for frequently touched surfaces in public and healthcare settings. Such coatings may have the ability to kill a variety of microorganisms and bio-structures and reduce the risk of virus transmission. This paper proposes an extremely rapid method to introduce rare-earth doping nano-ZnO in polyamines for the preparation of the anti-microbial polyurea coatings. The nano-ZnO is prepared by wet chemical method, and the RE-doped nano-ZnO was obtained by mixing nano ZnO and RE-dopants with an appropriate amount of nitric acid. This rapidly fabricated polyurea coating can effectively reduce bacteria from enriching on the surface. Comparing with pure nano-ZnO group, all the polyurea coatings with four different rare-earth elements (La, Ce, Pr and Gd) doped nano-ZnO. The La-doped nano-ZnO formula group indicates the highest bactericidal rate over 85% to Escherichia coli (E. coli) and Pseudomonas aeruginosa (Pseudomonas). Followed by Ce/ZnO, the bactericidal rate may still remain as high as 83% at room temperature after 25-min UV-exposure. It is believed that the RE-doping process may greatly improve the photocatalytic response to UV light as well as environmental temperature due to its thermal catalytic enhancement. Through the surface characterizations and bioassays, the coatings have a durably high bactericidal rate even after repeated usage. As polyurea coating itself has high mechanical strength and adhesive force with most substrate materials without peel-off found, this rapid preparation method will also provide good prospects in practical applications.

Contributions of photochemistry to bio-based antibacterial polymer materials

Surgical site infections constitute a major health concern that may be addressed by conferring antibacterial properties to surgical tools and medical devices via functional coatings. Bio-sourced polymers are particularly well-suited to prepare such coatings as they are usually safe and can exhibit intrinsic antibacterial properties or serve as hosts for bactericidal agents. The goal of this Review is to highlight the unique contribution of photochemistry as a green and mild methodology for the development of such bio-based antibacterial materials. Photo-generation and photo-activation of bactericidal materials are illustrated. Recent efforts and current challenges to optimize the sustainability of the process, improve the safety of the materials and extend these strategies to 3D biomaterials are also emphasized.

Biochemical and molecular changes of the zosteric acid-treated Escherichia coli biofilm on a mineral surface

Purpose

The main goal of the present work was to assess the effectiveness of zosteric acid (ZA) in hindering Escherichia coli biofilm formation on a mineral surface.

Methods

Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) flow system was used to probe in situ the biochemical changes induced by ZA on E. coli sessile cells growing on the zinc selenide ATR plate. Comparative proteome analysis was conducted on the sessile cells to better understand the principal molecular changes that occur on ZA-treated biofilms.

Results

The ZA treatment modified the kinetics of the biofilm development. After the ZA exposure, dramatic changes in the carbohydrates, proteins, and DNA profiles were observed over time in the ATR-FTIR spectra. These results were translated into the physiological effects such as the reduction of both the biomass and the EPS contents, the inhibition of the biofilm growth, and the promotion of the detachment. In E. coli sessile cells, the comparative proteome analysis revealed that, while the stress responses were upregulated, the pathways belonging to the DNA replication and repair were downregulated in the ZA-treated biofilms.

Conclusions

The ZA reduced the binding capability of E. coli cells onto the ZnSe crystal, hindering the firm adhesion and the subsequent biofilm development on a mineral surface. The variation of the protein patterns indicated that the ZA acted as a stress factor on the sessile cells that seemed to discourage biomass proliferation, consequently decreasing the surface colonization.

Preparation of AAEK-functionalized cellulose film with antibacterial and anti-adhesion activities

Bacterial adhesion infection caused by medical materials in clinical application has become a serious threat, and it urgently needs new strategies to deal with these clinical challenges. The purpose of this study is to explore the effectiveness of surface-decorated aryl (β-amino) ethyl ketones (AAEK), a promising sorting enzyme A (SrtA) inhibitor of Staphylococcus aureus, to improve the anti-adhesion ability of biomaterials. AAEK was covalently grafted onto cellulose films (CF) via copper-catalyzed azide-alkyne 1, 3-dipolar cycloaddition click reaction. The data of contact angle measurements, ATR-FTIR and XPS proved the successful covalent attachment of AAEK-CF, and the antimicrobial efficacy of AAEK coating was assessed by CFUs, crystal violet staining, scanning electron microscopy and Living/Dead bacteria staining assay. The results illustrated that AAEK-CF exhibited excellent anti-adhesion ability to Staphylococcus aureus, and significantly reduced the number of bacteria adhering to the film. More importantly, AAEK-CF could hinder the formation of bacterial biofilm. Furthermore, AAEK-CF indicated no cytotoxicity to mammalian cells, and the cells could grow normally on the modified surface. Hence, our present work demonstrated that the grafting of the SrtA inhibitor-AAEK onto cellulose films enabled to combat bacterial biofilm formation in biomedical applications.

Interaction between the Oral Microbiome and Dental Composite Biomaterials: Where We Are and Where We Should Go

Dental composites are routinely placed as part of tooth restoration procedures. The integrity of the restoration is constantly challenged by the metabolic activities of the oral microbiome. This activity directly contributes to a less-than-desirable half-life for the dental composite formulations currently in use. Therefore, many new antimicrobial dental composites are being developed to counteract the microbial challenge. To ensure that these materials will resist microbiome-derived degradation, the model systems used for testing antimicrobial activities should be relevant to the in vivo environment. Here, we summarize the key steps in oral microbial colonization that should be considered in clinically relevant model systems. Oral microbial colonization is a clearly defined developmental process that starts with the formation of the acquired salivary pellicle on the tooth surface, a conditioned film that provides the critical attachment sites for the initial colonizers. Further development includes the integration of additional species and the formation of a diverse, polymicrobial mature biofilm. Biofilm development is discussed in the context of dental composites, and recent research is highlighted regarding the effect of antimicrobial composites on the composition of the oral microbiome. Future challenges are addressed, including the potential of antimicrobial resistance development and how this could be counteracted by detailed studies of microbiome composition and gene expression on dental composites. Ultimately, progress in this area will require interdisciplinary approaches to effectively mitigate the inevitable challenges that arise as new experimental bioactive composites are evaluated for potential clinical efficacy. Success in this area could have the added benefit of inspiring other fields in medically relevant materials research, since microbial colonization of medical implants and devices is a ubiquitous problem in the field.

Ecology of the plastisphere

The plastisphere, which comprises the microbial community on plastic debris, rivals that of the built environment in spanning multiple biomes on Earth. Although human-derived debris has been entering the ocean for thousands of years, microplastics now numerically dominate marine debris and are primarily colonized by microbial and other microscopic life. The realization that this novel substrate in the marine environment can facilitate microbial dispersal and affect all aquatic ecosystems has intensified interest in the microbial ecology and evolution of this biotope. Whether a 'core' plastisphere community exists that is specific to plastic is currently a topic of intense investigation. This Review provides an overview of the microbial ecology of the plastisphere in the context of its diversity and function, as well as suggesting areas for further research.

The synergistic effect of hierarchical structure and alkyl chain length on the antifouling and bactericidal properties of cationic/zwitterionic block polymer brushes

A well-organized hierarchical structure and appropriate alkyl chain length facilitate the synergistic anti-biofilm effect.

Urinary Catheter Coating Modifications: The Race against Catheter-Associated Infections

Urinary catheters are common medical devices, whose main function is to drain the bladder. Although they improve patients’ quality of life, catheter placement predisposes the patient to develop a catheter-associated urinary tract infection (CAUTI). The catheter is used by pathogens as a platform for colonization and biofilm formation, leading to bacteriuria and increasing the risk of developing secondary bloodstream infections. In an effort to prevent microbial colonization, several catheter modifications have been made ranging from introduction of antimicrobial compounds to antifouling coatings. In this review, we discuss the effectiveness of different coatings in preventing catheter colonization in vitro and in vivo, the challenges in fighting CAUTIs, and novel approaches targeting host–catheter–microbe interactions.

Testing Anti-Biofilm Polymeric Surfaces: Where to Start?

Present day awareness of biofilm colonization on polymeric surfaces has prompted the scientific community to develop an ever-increasing number of new materials with anti-biofilm features. However, compared to the large amount of work put into discovering potent biofilm inhibitors, only a small number of papers deal with their validation, a critical step in the translation of research into practical applications. This is due to the lack of standardized testing methods and/or of well-controlled in vivo studies that show biofilm prevention on polymeric surfaces; furthermore, there has been little correlation with the reduced incidence of material deterioration. Here an overview of the most common methods for studying biofilms and for testing the anti-biofilm properties of new surfaces is provided.

Recent Advances in Non-Conventional Antimicrobial Approaches for Chronic Wound Biofilms: Have We Found the 'Chink in the Armor'?

Chronic wounds are a major healthcare burden, with huge public health and economic impact. Microbial infections are the single most important cause of chronic, non-healing wounds. Chronic wound infections typically form biofilms, which are notoriously recalcitrant to conventional antibiotics. This prompts the need for alternative or adjunct ‘anti-biofilm’ approaches, notably those that account for the unique chronic wound biofilm microenvironment. In this review, we discuss the recent advances in non-conventional antimicrobial approaches for chronic wound biofilms, looking beyond standard antibiotic therapies. These non-conventional strategies are discussed under three groups. The first group focuses on treatment approaches that directly kill or inhibit microbes in chronic wound biofilms, using mechanisms or delivery strategies distinct from antibiotics. The second group discusses antimicrobial approaches that modify the biological, chemical or biophysical parameters in the chronic wound microenvironment, which in turn enables the disruption and removal of biofilms. Finally, therapeutic approaches that affect both, biofilm bacteria and microenvironment factors, are discussed. Understanding the advantages and limitations of these recent approaches, their stage of development and role in biofilm management, could lead to new treatment paradigms for chronic wound infections. Towards this end, we discuss the possibility that non-conventional antimicrobial therapeutics and targets could expose the ‘chink in the armor’ of chronic wound biofilms, thereby providing much-needed alternative or adjunct strategies for wound infection management.

Synthesis, Characterization, and Bacterial Fouling-Resistance Properties of Polyethylene Glycol-Grafted Polyurethane Elastomers

Despite advances in material sciences and clinical procedures for surgical hygiene, medical device implantation still exposes patients to the risk of developing local or systemic infections. The development of efficacious antimicrobial/antifouling materials may help with addressing such an issue. In this framework, polyethylene glycol (PEG)-grafted segmented polyurethanes were synthesized, physico-chemically characterized, and evaluated with respect to their bacterial fouling-resistance properties. PEG grafting significantly altered the polymer bulk and surface properties. Specifically, the PEG-grafted polyurethanes possessed a more pronounced hard/soft phase segregated microstructure, which contributed to improving the mechanical resistance of the polymers. The better flexibility of the soft phase in the PEG-functionalized polyurethanes compared to the pristine polyurethane (PU) was presumably also responsible for the higher ability of the polymer to uptake water. Additionally, dynamic contact angle measurements evidenced phenomena of surface reorganization of the PEG-functionalized polyurethanes, presumably involving the exposition of the polar PEG chains towards water. As a consequence, Staphylococcus epidermidis initial adhesion onto the surface of the PEG-functionalized PU was essentially inhibited. That was not true for the pristine PU. Biofilm formation was also strongly reduced.