Tetrakis(hydroxymethyl)phosphonium salts: Their properties, hazards and toxicities

Revisiting the phosphonium salt chemistry for P-doped carbon synthesis: toward high phosphorus contents and beyond the phosphate environment

The introduction of phosphorus and nitrogen atoms in carbo-catalysts is a common way to tune the electronic density, and thereby the reactivity, of the material, as well as to introduce surface reactive sites. Numerous environments are reported for the N atoms, but the P-doping chemistry is less explored and focuses on surface POx groups. A one-step synthesis of P/N-doped carbonaceous materials is presented here, using affordable and industrially available urea and tetrakis(hydroxymethyl)phosphonium chloride (THPC) as the N and P sources, respectively. In contrast to most of the synthetic pathways toward P-doped carbonaceous materials, the THPC precursor only displays P-C bonds along the carbon backbone. This resulted in unusual phosphorus environments for the materials obtained from direct thermal treatment of THPC-urea, presumably of type C-P-N according to 31P NMR and XPS. Alternatively, the in situ polymerization and calcination of the precursors were run in calcium chloride hydrate, used as a combined reaction medium and porogen agent. Following this salt-templating strategy led to particularly high phosphorus contents (up to 18 wt%), associated with porosities up to 600 m2 g-1. The so-formed P/N-doped porous materials were employed as metal-free catalysts for the mild oxidative dehydrogenation of N-heterocycles to N-heteroarenes at room temperature and in air.

A new approach to monitoring typical organophosphorus compounds (OPs) in environmental media: From database building to suspect screening

Organophosphorus compounds (OPs) are widely used as flame retardants (FRs) and plasticizers, yet strategies for comprehensively screening of suspect OPs in environmental samples are still lacking. In this work, a neoteric, robust, and general suspect screening technique was developed to identify novel chemical exposures by use of ultra-high performance liquid chromatography-Q Exactive hybrid quadrupole-Orbitrap high resolution mass spectrometry (UHPLC-Q-Orbitrap HRMS). We firstly established a suspect chemical database which had 7,922 OPs with 4,686 molecular formulas, and then conducted suspect screening in n = 50 indoor dust samples, n = 76 sediment samples, and n = 111 water samples. By use of scoring criteria such as retention time prediction models, we successfully confirmed five compounds by comparison with their authentic standards, and prioritized three OPs candidates including a nitrogen/fluorine-containing compound, that is dimethyl {1H-indol-3-yl[3-(trifluoromethyl)anilino]methyl} phosphonate (DMITFMAMP). Given that the biodegradation half-life values in water (t1/2,w) of DMITFMAMP calculated by EPI Suite is 180 d, it is considered to be potentially persistent. This strategy shows promising potential in environmental pollution assessment, and can be expected to be widely used in future research.

Dioxaphosphabicyclooctanes: small caged phosphines from tris(hydroxymethyl)phosphine

Dioxaphosphabicyclo[2.2.2]octanes (L1-L4) have been prepared in a one-pot reaction from tris(hydroxymethyl)phosphine and various α,β-unsaturated ketones. The non-volatile phosphines oxidise very slowly in air. They possess highly upfield 31P chemical shifts (-59 to -70 ppm), small cone angles (121-140°) and a similar electronic parameter to PPh3. Reaction of L1 with [Rh(acac)(CO)2] gave the complex [Rh(acac)(CO)(L1)] with a ν(CO) of 1981.5 cm-1, whereas reaction L1 with [Rh(CO)2Cl]2 gave [Rh(CO)(L1)2Cl] with a ν(CO) of 1979.9 cm-1, remarkably similar to the CO stretching frequencies reported for analogous PPh3 complexes. The cage phosphines were explored as ligands in rhodium catalysed hydroformylation of 1-octene. All of the ligands gave a linear selectivity to n-nonanal of 68%, regardless of the substituents. However the ligand substituents had a significant effect on the catalyst activity, with increased steric bulk around the coordination environment giving a three-fold increase in aldehyde yield. The phosphines undergo ligand subsitution with [Pd(MeCN)2Cl2] forming square planar trans-[Pd(L)2Cl2] complexes. Subsequent reduction with hydrazine furnishes homoleptic tetravalent [Pd(L1)4] which was applied as a catalyst in Suzuki-Miyaura couplings, furnishing the C-C coupled products in moderate yields.

Oxygen-Containing Quaternary Phosphonium Salts (oxy-QPSs): Synthesis, Properties, and Cellulose Dissolution

In the present study, the synthesis of oxygen-containing quaternary phosphonium salts (oxy-QPSs) was described. Within this work, structure-property relationships of oxy-QPSs were estimated by systematic analysis of physical-chemical properties. The influence of the oxygen-containing substituent was examined by comparing the properties of oxy-QPSs in homology series as well as with phosphonium analog-included alkyl side chains. The crystal structure analysis showed that the oxygen introduction influences the conformation of the side chain of the oxy-QPS. It was found that oxy-QPSs, using an aprotic co-solvent, dimethylsulfoxide (DMSO), can dissolve microcrystalline cellulose. The cellulose dissolution in oxy-QPSs appeared to be dependent on the functional group in the cation and anion nature. For the selected conditions, dissolution of up to 5 wt% of cellulose was observed. The antimicrobial activity of oxy-QPSs under study was expected to be low. The biocompatibility of oxy-QPSs with fermentative microbes was tested on non-pathogenic Saccharomyces cerevisiae, Lactobacillus plantarum, and Bacillus subtilis. This reliably allows one to safely address the combined biomass destruction and enzyme hydrolysis processes in one pot.

β-Cyclodextrin network crosslinked by novel phosphonium-based tetrakiscarboxylic acid derived from PH3 tail gas: Synthesis and application for rapid removal of organic dyes from wastewater

Organic dyes, such as methyl orange (MO), Congo red (CR), crystal violet (CV) and methylene blue (MB), are common organic pollutants existing in wastewater. Therefore, the exploration of bio-based adsorbents for the efficient removal of organic dyes from wastewater has gained many attentions. Here, we report a PCl₃-free synthetic method for the synthesis of phosphonium-containing polymers, in which the prepared tetrakis(2-carboxyethyl) phosphonium chloride-crosslinked β-cyclodextrin (TCPC-β-CD) polymers were applied to the removal of dyes from water. The effects of contact time, pH (1-11), and dye concentration were investigated. The selected dye molecules could be captured by the host-gest inclusion of β-CD cavities, and the phosphonium and carboxyl groups in the polymer structure would respectively facilitate the removal of cationic dyes (MB and CV) and anionic dyes (MO and CR) via electrostatic interactions. In a mono-component system, over 99 % of MB could be removed from water within the first 10 min. Based on the Langmuir model, the calculated maximum adsorption capacities of MO, CR, MB, and CV were 180.43, 426.34, 306.57, and 470.11 mg/g (or 0.55, 0.61, 0.96 and 1.15 mmol/g), respectively. Additionally, TCPC-β-CD was easily regenerated using 1 % HCl in ethanol, and the regenerative adsorbent still showed high removal capacities for MO, CR, and MB even after seven treatment cycles.

Taming PH3: State of the Art and Future Directions in Synthesis

Appetite for reactions involving PH₃ has grown in the past few years. This in part is due to the ability to generate PH₃ cleanly and safely via digestion of cheap metal phosphides with acids, thus avoiding pressurized cylinders and specialized equipment. In this perspective we highlight current trends in forming new P–C/P–OC bonds with PH₃ and discuss the challenges involved with selectivity and product separation encumbering these reactions. We highlight the reactivity of PH₃ with main group reagents, building on the early pioneering work with transition metal complexes and PH₃. Additionally, we highlight the recent renewal of interest in alkali metal sources of H₂P^– which are proving to be useful synthons for chemistry across the periodic table. Such MPH₂ sources are being used to generate the desired products in a more controlled fashion and are allowing access to unexplored phosphorus-containing species.

Optimized O3/Fe(II) Using Response Surface Methodology for Organic Phosphorus Removal in Tetrakis(hydroxymethyl)phosphonium Sulfate Wastewater

Tetrakis(hydroxymethyl)phosphonium sulfate (THPS) wastewater is a kind of industrial wastewater which is difficult to biodegrade. In this work, O3/Fe(II) was used to remove organic phosphorus from THPS wastewater. The operating conditions in this process were optimized using the Box-Behnken response surface method based on single-factor experimentation. A response model of the organic phosphorus removal rate considering the initial pH, reaction time, ozone concentration, and Fe(II) dosage was established. The results showed that the ozone concentration and initial pH had a significant effect on the removal rate of organic phosphorus, and the model fit well (R2 = 0.98). The maximum removal rate of organic phosphorus predicted by this model was 86.04%, while the deviation between the predicted and experimental values was 0.91%. We concluded that the quadratic model was an effective tool for optimizing the removal of organic phosphorus in the THPS wastewater by O3/Fe(II).

Main-chain/Side-chain type Phosphine Oxide-Containing Reactive Polymers Derived from same Monomer: Controllable RAFT Polymerisation and ring-opening Polycondensation

This paper reports the synthesis and selective polymerisations of an epoxy-rich phosphine oxide-containing styrenic monomer, namely 4-vinylbenzyl-bis((oxiran-2-ylmethoxy)methyl) phosphine oxide (VBzBOPO). The styryl and epoxy functionalities could be polymerized independently through...

Insights into the mechanism of the formation of noble metal nanoparticles by in situ NMR spectroscopy

High-resolution solution Nuclear Magnetic Resonance (NMR) spectroscopy has been used to gain insights into the mechanism of the formation of gold, platinum and gold-platinum alloyed nanoparticles using metal precursors and tetrakis(hydroxymethyl)phosphonium chloride (THPC) as starting materials. THPC is widely used in nanochemistry as a reductant and stabilizer of nanoparticles, however the identity of the species responsible for each role is unknown. The multinuclear study of the reaction media by NMR spectroscopy allowed us to elucidate the structure of all the compounds that participate in the transformation from the metal salt precursor to the reduced metal that forms the nanoparticle, thus clarifying the controversy found in the literature regarding the formation of THPC-based compounds. The progress of the reaction was monitored from the initial moments of the synthesis to the end of the reaction and after long periods of time. Insights into the dual role of THPC were gained, identifying methanol and hydrogen as the actual reducing agents, and tris(hydroxymethyl)phosphine oxide (THPO) as the real stabilizing agent. Finally, the different stabilities of gold and platinum nanoparticles can be attributed to the different catalytic activities of the metals.

Chemical and physical chitosan hydrogels as prospective carriers for drug delivery: a review

This review summarizes and discusses recent research progress in chemical and physical chitosan hydrogels for drug delivery.

A novel reactive phosphonium-containing polyelectrolyte with multiple reactivities: monomer synthesis, RAFT polymerization and post-polymerization modifications

A reactive polyelectrolyte can be defined as a kind of functional polymer which possesses not only the basic properties of a polyelectrolyte but also wide post-polymerization modification possibilities, which can be achieved via various reactions.