Convective Drying Kinetics and Physical Properties of Silver Carp (Hypophthalmichthys molitrix) Fillets

Convective Drying of Osmo-Treated Abalone (Haliotis rufescens) Slices: Diffusion, Modeling, and Quality Features

The focus of this research was based on the application of an osmotic pretreatment (15% NaCl) for drying abalone slices, and it evaluates the influence of hot-air drying temperature (40–80°C) on the product quality. In addition, the mass transfer kinetics of salt and water was also studied. The optimal time of the osmotic treatment was established until reaching a pseudo equilibrium state of the water and salt content (290 min). The water effective diffusivity values during drying ranged from 3.76 to 4.75 × 10−9 m2/s for three selected temperatures (40, 60, and 80°C). In addition, experimental data were fitted by Weibull distribution model. The modified Weibull model provided good fitting of experimental data according to applied statistical tests. Regarding the evaluated quality parameters, the color of the surface showed a change more significant at high temperature (80°C), whereas the nonenzymatic browning and texture showed a decrease during drying process mainly due to changes in protein matrix and rehydration rates, respectively. In particular, working at 60°C resulted in dried samples with the highest quality parameters.

Comparison of Drying and Quality Characteristics of Pear (Pyrus Communis L.) Using Mid-Infrared-Freeze Drying and Single Stage of Freeze Drying

This article provides results of an experimental investigation of hybrid- (MIR-FD), mid-infrared- (MIR) and freeze drying (FD) on the drying characteristics, energy consumption and quality parameters of pear. Rehydration ratio, color, texture, water activity, phenolic content and antioxidant activity were measured to evaluate the quality of dried pear products. Mid-infrared-freeze drying (MIR-FD) had the higher drying rate, which reduced the drying time by 14.3–42.9 % compared with FD method. Two empirical models were chosen to fit the drying curves and the models had the suitable R2 and RMSE values. Temperature characteristics of MIR and MIR-FD dried pear were determined in terms of interior temperature variation. The MIR-FD pear had darker color, better rehydration capacity, similar water activity, lower hardness (except of MIR-FD70°C) and highest content of chemical composition than single stage of FD products. Above all, the MIR50-60°C-FD was suggested as the best drying method for pear in this study.

Dehydration kinetics of salmon and trout fillets using ultrasonic vacuum drying as a novel technique

In this study, a novel ultrasonic vacuum (USV) drying technique was used to shorten the drying time of fish fillets. For this purpose, ultrasonic treatment and vacuum-drying were simultaneously performed to dehydrate salmon and trout fillets at 55°C, 65°C, and 75°C. In addition, the USV technique was compared with vacuum-drying and oven-drying techniques. The dehydration kinetics of the fillets was successfully described by seven thin-layer drying models with R(2) range between 0.944 and 1.000. Depending on drying temperatures and fish species, the drying times could be shortened using the USV technique between 7.4% and 27.4% compared with vacuum-drying. The highest effective moisture diffusivity was determined in the fillets dried with the USV technique and they increased with increasing drying temperatures. Ultrasonic treatment accelerated the vacuum drying process for the fillets; therefore, this technique could be used to improve the efficiency of vacuum-drying for the fillets.

Effect of osmotic treatments and drying methods on bioactive compounds in papaya and tomato

FIR and hot air drying enhanced lycopene and lutein contents, whereas osmotic treatment preserved sinapic acid and ferulic acid.