Nifedipine loaded chitosan microspheres prepared by emulsification phase-separation

Synthesis and Characterization of Porous Chitosan/Saccharomycetes Adsorption Microspheres

Porous chitosan/saccharomycetes adsorption microspheres were successfully prepared by using silica gel as porogen. The morphology of porous chitosan/saccharomycetes microspheres was characterized by scanning electron microscopy, the interaction between molecules was characterized by Fourier transform infrared spectroscopy, and the crystallization property of the microspheres was characterized by X-ray diffraction. The results showed that the adsorption sites of amino and hydroxyl groups had been provided by the porous chitosan/saccharomycetes microspheres for the removal of preservatives, pigments, and other additives in food. The surface roughness of microspheres could be improved by increasing the mass ratio of saccharomycetes. The increase in silica gels could make the microsphere structure more compact. The porous chitosan/saccharomycetes microspheres could be used as adsorbents to adsorb doxycycline in wastewater.

Studies on antimicrobial peptide-loaded nanomaterial for root caries restorations to inhibit periodontitis related pathogens in periodontitis care

AIMS

To prepare a novel antimicrobial peptide Nal-P-113 loaded poly (ethylene glycol) combined chitosan nanoparticles (Nal-P-113-PEG-CSNPs) for root caries restorations to control the periodontitis related pathogens in periodontitis care.

METHODS

Nanoparticles were prepared by simple polymerisation method and characterised using effective analytical methods (TEM, UV, etc.). The antimicrobial activity and biofilm formation of Nal-P-113-PEG-CSNPs was tested against periodontal bacterial pathogens by different in vitro methods.

RESULTS

The size of Nal-P-113 loaded PEG-Chitosn nanoparticles was 216.2 ± 1.6 nm. The drug encapsulation efficiency (%EE (w/w) of Nal-P-113-PEG-CSNPs was found to be 89.33 ± 1.67% (w/w). The antimicrobial examination showed that prepared NPs have effectively inhibited the growth of Fusobacterium nucleatum, Streptococcus gordonii, and Porphyromonas gingivalis with the MIC of 23 µg/mL, 6 µg/mL and 31 µg/mL, respectively.

CONCLUSIONS

The prepared antimicrobial peptide-loaded PEG-CSNPs provide excellent in vitro efficiency but, further studies are necessary to confirm its therapeutic efficacy on periodontitis care.

Formulation and evaluation of controlled release ethylcellulose and polyethylene glycol microspheres containing metoprolol tartrate

Metoprolol tartrate is rapidly absorbed from both gastric and intestinal regions, after oral administration. To retard the release rate of the metoprolol tartrate, microspheres were prepared with varying concentrations of a mixture containing ethylcellulose and polyethylene glycol-6000. The prepared microspheres were evaluated for various physicochemical characteristics and in vitro drug release. The percent yield of microspheres was in the range of 75.2-87.3%. The particle size of microspheres was found to be in the range of 73.2-85.5 μm. Fourier transform-infrared spectral analysis and differential scanning calorimetry concluded the absence of any interaction between the drug and the carriers. The release time profile of metoprolol tartrate from microspheres in 0.1 N hydrochloric acid solution was to the extent of 33.4-60.2%. The complete release of metoprolol tartrate occurred from MPT-3 and MPT-4 in phosphate buffer solution (pH 7.4) within 8 and 7 h, respectively, whereas the incomplete release (72.3%) occurred from MPT-1. Nearly, the complete release (98.5%) of metoprolol occurred from MPT-2 in 10 h. Formulation MPT-2 would be a preferred formulation. The release of metoprolol involves diffusion rate limited (R² = 0.9865) as a mechanism from drug release. The prepared microspheres of metoprolol tartrate eliminate the need for multiple dosing and provide patient compliance.

Preparation and Characterization of Genipin-Crosslinked Chitosan Microspheres for the Sustained Release of Salidroside

Chitosan microspheres (CsMs) that encapsulate salidroside (Sal) were prepared by the emulsion crosslinking method with naturally occurring genipin (Gp) and then examined for their in vitro release. Sal-loaded CsMs (Sal-CsMs) showed nearly spherical and smooth surfaces with internal voids. The particle size of Sal-CsMs ranged within 0.56–5.01 μm, and their encapsulation efficiency and loading capacity were beyond 77.58% and 23.29%, respectively. The stability of Sal improved after entrapment into the CsMs. The release rate of Sal from CsMs was initially rapid, followed by sustained release. The release behavior depended on the pH of the release medium. The main release mechanisms underlying the release procedure were anomalous behavior and Fickian diffusion. These results indicated that CsMs with a novel crosslinker of Gp was a potential carrier system for producing functional foods containing Sal.

Development of microspheres for biomedical applications: a review

An overview of microspheres manufactured for use in biomedical applications based on recent literature is presented in this review. Different types of glasses (i.e. silicate, borate, and phosphates), ceramics and polymer-based microspheres (both natural and synthetic) in the form of porous , non-porous and hollow structures that are either already in use or are currently being investigated within the biomedical area are discussed. The advantages of using microspheres in applications such as drug delivery, bone tissue engineering and regeneration, absorption and desorption of substances, kinetic release of the loaded drug components are also presented. This review also reports on the preparation and characterisation methodologies used for the manufacture of these microspheres. Finally, a brief summary of the existing challenges associated with processing these microspheres which requires further research and development are presented.

Sustained release optimized formulation of anastrozole-loaded chitosan microspheres: in vitro and in vivo evaluation

The purpose of this study was to develop sustained release formulation of anastrozole-loaded chitosan microspheres for treatment of breast cancer. Chitosan microspheres cross-linked with two different cross-linking agents viz, tripolyphosphate (TPP) and glutaraldehyde (GA) were prepared using single emulsion (w/o) method. A reverse phase HPLC method was developed and used for quantification of drug in microspheres and rat plasma. Influence of cross-linking agents on the properties of chitosan microspheres was extensively investigated. Formulations were characterized for encapsulation efficiency (EE), compatibility of drug with excipients, particle size, surface morphology, swelling capacity, erosion and drug release profile in phosphate buffer pH 7.4. EE varied from 30.4 ± 1.2 to 69.2 ± 3.2% and mean particle size distribution ranged from 72.5 ± 0.5 to 157.9 ± 1.5 μm. SEM analysis revealed smooth and spherical nature of microspheres. TPP microspheres exhibited higher swelling capacity, percentage erosion and drug release compared to GA microspheres. Release of anastrozole (ANS) was rapid up to 4 h followed by slow release status. FTIR analysis revealed no chemical interaction between drug and polymer. DSC analysis indicated ANS trapped in the microspheres existed in amorphous form in polymer matrix. The highest correlation coefficients (R (2)) were obtained for Higuchi model, suggesting a diffusion controlled mechanism. There was significant difference in the pharmacokinetic parameters (AUC(0-∞), Kel and t(1/2)) when ANS was formulated in the form of microspheres compared to pure drug. This may be attributed to slow release rate of ANS from chitosan microspheres and was detectable in rat plasma up to 48 h which correlates well with the in vitro release data.

Biodegradation of Chitosan-Tripolyphosphate Beads:In VitroandIn VivoStudies

In this study, chitosan [(1 --> 4) linked 2-amino-2-deoxy-beta-D-glucopyranose] beads were prepared by interacting this polycation (> 90% deacetylated) with the tripolyphosphate (TPP) polyanion. The resulting chitosan-TPP beads (C) were modified either by coating with sodium alginate (CA) or by cross-linking with glutaraldehyde (CGA). The in vitro degradation of C beads was found to be faster than its CA and CGA counterparts. C beads degraded faster at pH 6.5, compared to pH 7.4 conditions. At pH 7.4, about 41%, 37% and 10% of dry mass loss after 12 months was determined for C, CA and CGA, respectively. At pH 6.5, the dry mass loss of CA and CGA after the same period of time was found to be 73% and 37%, respectively. However, C beads completely degraded at pH 6.5 after 8 months of in vitro incubation. The in vivo biodegradation experiments were performed on Wistar rats (n = 24) for a duration of 6 months. No sign of fibrotic capsule formation was observed around any of the implanted beads at 2 and 6 months post-transplantation. At 2 months, the in vivo-degradation was slow-going and the beads in all groups were intact; CGA beads had more tissue reaction than C and CA beads at this time point. While the C beads had almost completely degraded after 6 months, the biodegradation process in CA and CGA beads was progressing. Histomorphometric analysis revealed that the in vivo biodegradation was in the order of C (approximately 85%) > CA (approximately 50%) > CGA (approximately 25%) after 6 months. Neovascularization was observed at the vicinity of the bead implants close to major blood vessels, both at 2 and 6 months time-points.

Evaluation of mucoadhesive properties of chitosan microspheres prepared by different methods

The mucoadhesive properties of chitosan microspheres prepared by different methods were evaluated by studying the interaction between mucin and microspheres in aqueous solution. The interaction was determined by the measurement of mucin adsorbed on the microspheres. A strong interaction between chitosan microspheres and mucin was detected. The intensity of the interaction was dependent upon the method of preparation of chitosan microspheres and the amount of mucin added. The extent of mucus adsorption was proportional to the absolute values of the positive zeta potential of chitosan microspheres. The zeta potential in turn was found to be dependent upon the method of preparation of microspheres. The adsorption of type III mucin (1% sialic acid content) was interpreted using Freundlich or Langmuir adsorption isotherms. The values of r2 were greater for Langmuir isotherm as compared with Freundlich isotherm. The adsorption of a suspension of chitosan microspheres in the rat small intestine indicated that chitosan microspheres prepared by tripolyphosphate cross-linking and emulsification ionotropic gelation can be used as an excellent mucoadhesive delivery system. The microspheres prepared by glutaraldehyde and thermal cross-linking showed good stability in HCl as compared with microspheres prepared by tripolyphosphate and emulsification ionotropic gelation.

Chitosan microspheres as a potential carrier for drugs

Chitosan is a biodegradable natural polymer with great potential for pharmaceutical applications due to its biocompatibility, high charge density, non-toxicity and mucoadhesion. It has been shown that it not only improves the dissolution of poorly soluble drugs but also exerts a significant effect on fat metabolism in the body. Gel formation can be obtained by interactions of chitosans with low molecular counterions such as polyphosphates, sulphates and crosslinking with glutaraldehyde. This gelling property of chitosan allows a wide range of applications such as coating of pharmaceuticals and food products, gel entrapment of biochemicals, plant embryo, whole cells, microorganism and algae. This review is an insight into the exploitation of the various properties of chitosan to microencapsulate drugs. Various techniques used for preparing chitosan microspheres and evaluation of these microspheres have also been reviewed. This review also includes the factors that affect the entrapment efficiency and release kinetics of drugs from chitosan microspheres.