Swelling Behavior of Poly(2‐hydroxyethyl Methacrylate‐co‐acrylic Acid‐co‐ammonium Acrylate) Hydrogels

Superabsorbent polymers: A state-of-art review on their classification, synthesis, physicochemical properties, and applications

Superabsorbent polymers (SAP) and modified natural polymer hydrogels are widely and increasingly used in agriculture, health care textiles, effluent treatment, drug delivery, tissue engineering, civil concrete structure, etc. However, not many comprehensive reviews are available on this class of novel polymers. A review covering all the viable applications of SAP will be highly useful for researchers, industry persons, and medical, healthcare, and agricultural purposes. Hence, an attempt has been made to review SAPs with reference to their classifications, synthesis, modification by crosslinking, and physicochemical characterization such as morphology, swellability, thermal and mechanical properties, lifetime prediction, thermodynamics of swelling, absorption, release and transport kinetics, quantification of hydrophilic groups, etc. Besides, the possible methods of fine-tuning their structures for improving their absorption capacity, fast absorption kinetics, mechanical strength, controlled release features, etc. were also addressed to widen their uses. This review has also highlighted the biodegradability, commercial viability and market potential of SAPs, SAP composites, the feasibility of using biomass as raw materials for SAP production, etc. The challenges and future prospects of SAP, their safety, and environmental issues are also discussed.

Doubly Photopolymerized Holographic Sensors

Holographic sensors are two-dimensional (2D) photonic crystals that diffract narrow-band light in the visible spectrum to quantify analytes in aqueous solutions. Here, a holographic fabrication setup was developed to produce holographic sensors through a doubly polymerization system of a poly-2-hydroxyethyl methacrylate hydrogel film using a pulsed Nd:YAG laser (λ = 355 nm, 5 ns, 100 mJ). Wavelength shifts of holographic Bragg peak in response to alcohol species (0-100 vol %) were characterized. Diffraction spectra showed that the holographic sensors could be used for short-chain alcohols at concentrations up to 60 vol %. The reversibility of the sensor was demonstrated, exhibiting a response time of 7.5 min for signal saturation. After 30 cycles, the Bragg peak and color remained the same in both 20 and 60 vol %. The fabrication parameters were simulated in MATLAB using a 2D finite-difference time-domain algorithm to model the interference pattern and energy flux profile of laser beam recording in the hydrogel medium. This work demonstrates a particle-free holographic sensor that offers continuous, reversible, and rapid colorimetric readouts for the real-time quantification of alcohols.

Porous ZnO/2–Hydroxyethyl Methacrylate Eluting Coatings for Ureteral Stent Applications

High-surface-area porous coatings represent an interesting option to fabricate eluting stents with additional functionalities, as controlled drug delivery and antibacterial resistance properties. ZnO is a biocompatible material available in various high-surface-area morphologies, with promising antibacterial properties. Hydrophilic 2-hydroxyethyl methacrylate (HEMA) polymers (pHEMA) have been widely investigated for their biomedical applications, thanks to their biocompatibility, absence of toxicity, and tunable swelling properties. This work aims to demonstrate the use of porous ZnO/polymer bilayer coatings for future drug eluting stent applications. Sputtered mesoporous ZnO layers were coated with pHEMA and p(HEMA-co-acrylic acid (AA)) films through vacuum infiltration and drop-casting methods. The last approach was found to be the most suitable one for achieving a good polymer infiltration within the ZnO matrix and to avoid the mechanical detachment of the porous film from the substrate. The corresponding release properties were evaluated by loading a fluorescent dye in the host ZnO matrix, before drop-casting the polymer coating. For pure ZnO, the release of the dye was completed after 2 h. For ZnO/pHEMA, the sustained release of the molecule was achieved with only 30% released after 2 h and 100% released after seven days. In this case, the pH-triggered delivery properties were also demonstrated by switching from neutral to acidic pH conditions. No significant changes were obtained for the ZnO/p(HEMA-co-AA) system, which exhibited a faster swelling behavior and a release profile similar to pure ZnO.

Engineering of responsive polymer based nano-reactors for facile mass transport and enhanced catalytic degradation of 4-nitrophenol

Silver nanoparticles with average diameter of 10±3nm were synthesized within the sieves of poly(N-isopropylacrylamide-2-hydroxyethylmethacrylate-acrylic acid) (p(NIPAAm-HEMA-AAc)) polymer microgels. Free radial emulsion polymerization was employed for synthesis of p(NIPAAm-HEMA-AAc) polymer microgels. Silver nanoparticles were introduced within the microgels sphere by in situ reduction method. Microgels and hybrid microgels were characterized by Fourier transform infrared spectroscopy, ultra violet-visible spectroscopy, transmission electron microscopy and dynamic light scattering measurements. Catalytic activity of Ag-p(NIPAAm-HEMA-AAc) hybrid microgels was studied using catalytic reduction of 4-nitrophenol (4-NP) as a model reaction in aqueous media. The influence of sodium borohydride (NaBH₄) concentration, catalyst dose and 4-NP concentration on catalytic reduction of 4-NP was investigated. A linear relationship was found between catalyst dose and apparent rate constant (k_app). The mechanism of catalysis by hybrid microgels was explored for further development in this area. The deep analysis of catalytic process reveals that the unique combination of NIPAAm, HEMA and AAc does not only stabilize silver nanoparticles in polymer network but it also enhances the mass transport of hydrophilic substrate like 4-NP from outside to inside the polymer network.

Coaxial nanotubes of stimuli responsive polymers with tunable release kinetics

Stimuli responsive polymeric (SRP) nanotubes have great potential as nanocarriers of macromolecules due to their large surface areas and release mechanisms that can be activated externally. In this work, we demonstrate vapor phase synthesis of coaxial nanotubes with layers of different SRP polymers for improved release kinetics. Temperature responsive poly(N-isopropylacrylamide) (pNIPAAm), pH responsive poly(methacrylic acid) (pMAA) and poly(hydroxyethyl methacrylate) (pHEMA) are used to fabricate the responsive coaxial nanotubes and the phloroglucinol dye is used as the model molecule to study the release kinetics. Fastest release is observed with single layer pNIPAAm nanotubes with rates of 0.134 min(-1), whereas introducing pHEMA or pMAA as inner layers slows down the release, enabling tuning of the response. Furthermore, repeating the release studies multiple times shows that the release rates remain similar after each run, confirming the stability of the nanotubes.

Combinatorial Design of Hydrolytically Degradable, Bone-like Biocomposites Based on PHEMA and Hydroxyapatite

With advantages such as design flexibility in modifying degradation, surface chemistry, and topography, synthetic bone-graft substitutes are increasingly demanded in orthopedic tissue engineering to meet various requirements in the growing numbers of cases of skeletal impairment worldwide. Using a combinatorial approach, we developed a series of biocompatible, hydrolytically degradable, elastomeric, bone-like biocomposites, comprising 60 wt% poly(2-hydroxyethyl methacrylate-co-methacrylic acid), poly(HEMA-co-MA), and 40 wt% bioceramic hydroxyapatite (HA). Hydrolytic degradation of the biocomposites is rendered by a degradable macromer/crosslinker, dimethacrylated poly(lactide-b-ethylene glycol-b-lactide), which first degrades to break up 3-D hydrogel networks, followed by dissolution of linear pHEMA macromolecules and bioceramic particles. Swelling and degradation were examined at Hank's balanced salt solution at 37 °C in a 12-week period of time. The degradation is strongly modulated by altering the concentration of the co-monomer of methacrylic acid and of the macromer, and chain length/molecular weight of the macromer. 95% weight loss in mass is achieved after degradation for 12 weeks in a composition consisting of HEMA/MA/Macromer = 0/60/40, while 90% weight loss is seen after degradation only for 4 weeks in a composition composed of HEMA/MA/Macromer = 27/13/60 using a longer chain macromer. For compositions without a co-monomer, only about 14% is achieved in weight loss after 12-week degradation. These novel biomaterials offer numerous possibilities as drug delivery carriers and bone grafts particularly for low and medium load-bearing applications.