Fabrication and Physical Properties of Gelatin/Sodium Alginate/Hyaluronic Acid Composite Wound Dressing Hydrogel

Preparation and performance study of sodium alginate/bamboo fiber/gelatin ionic conductive self-healing hydrogel

This study has been successfully developed the Sodium alginate/Bamboo fiber /Gelatin（SA/BF/Gel）composite conductive hydrogel with adhesive and self-healing properties. Through in-depth research, the influence of Gel content on the tensile, adhesive, self-healing properties, and conductivity of the SA/BF/Gel composite conductive hydrogel was discussed. The sensing performance and sensing mechanism of the material were also investigated, along with a preliminary exploration of its potential applications. An attempt was made to apply the SA/BF/Gel composite conductive hydrogel to 3D printing technology, establishing a connection between the rheological properties of the hydrogel and its printing structure. The addition of Gel significantly improved the flexibility of the hydrogel, with a conductivity of up to 3.12 S/m at a Gel content of 1.5 %. When employed as a sensor, the material exhibited high sensitivity (GF = 2.21) and excellent cyclic stability, rendering it suitable for a wide range of applications in real-time monitoring of bending movements of fingers and wrists, as well as dynamic contact and variations in contact forces on the hydrogel surface. The SA/BF/Gel composite conductive hydrogel has the potential to be utilized in a multitude of applications, including the development of smart wearable devices, the monitoring of individual human beings, and the integration of human beings and machines. Furthermore, the research findings associated with this hydrogel will provide a strong foundation for the advancement of materials science and the integration of smart technologies.

Alginate/hyaluronic acid/gelatin ternary blended films as pH-sensitive drug carriers: In vitro ampicillin release and kinetic studies

Researchers continuously focused on the fabrication of innovative drug delivery systems to prevent microbial infections while minimizing systemic side effects. Among these, pH-sensitive antibiotic release systems based on bio-based materials have gained great attention due to their ability to precisely modulate drug kinetics and enhance therapeutic efficacy. Herein, pH-sensitive alginate/hyaluronic acid/gelatin ternary blended films were fabricated for the controlled release of ampicillin. Swelling capacity, hydrolytic degradation profile, pH reversibility and in vitro ampicillin release behavior of produced films were investigated in both simulated gastric (pH 1.2) and intestinal (pH 7.4) environments. The cumulative release amount of ampicillin at pH 1.2 (61.0 ± 1.07 mg drug/g polymer) was greater than that of at pH 7.4 (43.0 ± 1.05 mg drug/g polymer) proved that release behavior of ampicillin for produced films is pH-dependent. Based on the fitted release data, best fit was found as the first-order kinetic model with the highest R2 values of 0.966 and 0.962 for both pH conditions. According to Korsmeyer-Peppas model, drug release mechanism is also controlled by case II-transport. Furthermore, produced films demonstrated excellent cytocompatibility. All results revealed that obtained films could be a promising drug carrier to traditional targeting systems for site-specific, pH-sensitive ampicillin delivery in both gastric and intestine.

Effect of Polydopamine and Curcumin on Physicochemical and Mechanical Properties of Polymeric Blends

In this study, we prepared composites made from polyvinyl alcohol (PVA), sodium alginate (SA), curcumin (Cur), and polydopamine (PD). The film-forming properties of the composites were researched for potential wound-healing applications. The structures of the polymer blends and composites were studied by FTIR spectroscopy and microscopic observations (AFM and SEM). The mechanical properties were measured using a Zwick Roell testing machine. It was observed that the formation of a polymeric film based on the blend of polyvinyl alcohol and sodium alginate led to the generation of pores. The presence of curcumin in the composite resulted in the alteration of the blend properties. After solvent evaporation, the polymeric blend of PVA, SA, and curcumin formed a stable polymeric film, but the film showed poor mechanical properties. The addition of polydopamine led to an improvement in the mechanical strength of the film and an increase in its surface roughness. A polymeric film of sodium alginate presented the highest surface roughness value among all the studied specimens (66.6 nm), whereas polyvinyl alcohol showed the lowest value (1.60 nm). The roughness of the composites made of PVA/SA/Cur and PVA/SA/Cur/PD showed a value of about 25 nm. Sodium alginate showed the highest values of Young's modulus (4.10 GPa), stress (32.73 N), and tensile strength (98.48 MPa). The addition of PD to PVA/SA/Cur led to an improvement in the mechanical properties. Improved mechanical properties and appropriate surface roughness may suggest that prepared blends can be used for the preparation of wound-healing materials.

Alginate-Based Hydrogels and Scaffolds for Biomedical Applications

Alginate is a natural polymer of marine origin and, due to its exceptional properties, has great importance as an essential component for the preparation of hydrogels and scaffolds for biomedical applications. The design of biologically interactive hydrogels and scaffolds with advanced, expected and required properties are one of the key issues for successful outcomes in the healing of injured tissues. This review paper presents the multifunctional biomedical applications of alginate-based hydrogels and scaffolds in selected areas, highlighting the key effect of alginate and its influence on the essential properties of the selected biomedical applications. The first part covers scientific achievements for alginate in dermal tissue regeneration, drug delivery systems, cancer treatment, and antimicrobials. The second part is dedicated to our scientific results obtained for the research opus of hydrogel materials for scaffolds based on alginate in synergy with different materials (polymers and bioactive agents). Alginate has proved to be an exceptional polymer for combining with other naturally occurring and synthetic polymers, as well as loading bioactive therapeutic agents to achieve dermal, controlled drug delivery, cancer treatment, and antimicrobial purposes. Our research was based on combinations of alginate with gelatin, 2-hydroxyethyl methacrylate, apatite, graphene oxide and iron(III) oxide, as well as curcumin and resveratrol as bioactive agents. Important features of the prepared scaffolds, such as morphology, porosity, absorption capacity, hydrophilicity, mechanical properties, in vitro degradation, and in vitro and in vivo biocompatibility, have shown favorable properties for the aforementioned applications, and alginate has been an important link in achieving these properties. Alginate, as a component of these systems, proved to be an indispensable factor and played an excellent “role” in the optimal adjustment of the tested properties. This study provides valuable data and information for researchers and demonstrates the importance of the role of alginate as a biomaterial in the design of hydrogels and scaffolds that are powerful medical “tools” for biomedical applications.

Extracellular matrix (ECM)-inspired high-strength gelatin-alginate based hydrogels for bone repair

It has always been a huge challenge to construct high-strength hydrogels that are composed entirely of natural polymers. In this study, inspired by the structural characteristics of the extracellular matrix (ECM), gelatin and hydrazide alginate were employed to mimic the composition of collagen and glycosaminoglycans (GAGs) in the ECM, respectively, to develop natural polymer (NP) high-strength hydrogels crosslinked by physical and covalent interactions (Gelatin-HAlg-DN). First, HAlg and gelatin can form physically crosslinked hydrogels (Gelatin-HAlg) due to electrostatic and hydrogen bond interactions. Then, the Gelatin-HAlg hydrogels can be further covalently crosslinked in the presence of 1-(3-dimethylaminopropyl)-3-ethyl carbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS) to obtain Gelatin-HAlg-DN hydrogels. The obtained Gelatin-HAlg-DN hydrogels exhibit considerably enhanced mechanical properties (tensile strength: 0.9 MPa; elongation at break: 177%) with a maximum 16- and 3.2-fold increase in tensile strength and elongation at break, respectively, compared with gelatin methacrylate (GelMA) hydrogels. Importantly, the Gelatin-HAlg-DN hydrogels exhibit excellent biodegradability and swelling stability under physiological conditions, and the capability to support cell adhesion and proliferation. In a rat critical size bone defect model, Gelatin-HAlg-DN hydrogels loaded with psoralen could effectively promote bone regeneration, showing appealing potential as tissue engineering scaffolds.

Are Natural Compounds a Promising Alternative to Synthetic Cross-Linking Agents in the Preparation of Hydrogels?

The main aim of this review is to assess the potential use of natural cross-linking agents, such as genipin, citric acid, tannic acid, epigallocatechin gallate, and vanillin in preparing chemically cross-linked hydrogels for the biomedical, pharmaceutical, and cosmetic industries. Chemical cross-linking is one of the most important methods that is commonly used to form mechanically strong hydrogels based on biopolymers, such as alginates, chitosan, hyaluronic acid, collagen, gelatin, and fibroin. Moreover, the properties of natural cross-linking agents and their advantages and disadvantages are compared relative to their commonly known synthetic cross-linking counterparts. Nowadays, advanced technologies can facilitate the acquisition of high-purity biomaterials from unreacted components with no additional purification steps. However, while planning and designing a chemical process, energy and water consumption should be limited in order to reduce the risks associated with global warming. However, many synthetic cross-linking agents, such as N,N'-methylenebisacrylamide, ethylene glycol dimethacrylate, poly (ethylene glycol) diacrylates, epichlorohydrin, and glutaraldehyde, are harmful to both humans and the environment. One solution to this problem could be the use of bio-cross-linking agents obtained from natural resources, which would eliminate their toxic effects and ensure the safety for humans and the environment.

Gelatin-Based Versus Alginate-Based Hydrogels: Providing Insight in Wound Healing Potential

Wound dressings under the form of films constituted of modified alginate (methacrylated alginate - AlgMA) versus a gelatine derivative containing norbornene functionalities (GelNB) are developed and evaluated for their moisturizing effects, followed by further in vivo testing to assay their wound healing potential. The gel fraction results shows that AlgMA and GelNB films displayed a high crosslinking efficiency while the swelling assay reveals a stronger water uptake capacity for AlgMA films compared to GelNB and to commercial dressing AquacelAg, used as positive control. Referring to the in vivo wound healing effect, the GelNB films not only exhibit proper healing properties, yet is higher to the AquacelAg, while the AlgMA films exhibit similar wound healing effect as the positive control. On a microscopic level, the healing phases (from inflammation to proliferation and contraction) are present for both materials, yet at a faster rate for the GelNB films, which is in line with the macroscopic findings. These results provide data which support that GelNB films outperform AlgMA films, but both can be used for wound healing applications.

A core-shell structured alginate hydrogel beads with tunable thickness of carboxymethyl cellulose coating for pH responsive drug delivery

pH-responsive core-shell structured composite hydrogel beads, composed of a alginate (ALG) core coated with carboxymethyl cellulose (CMC) shell (ALG@CMC), were prepared by using in-situ gel preparation technology as a drug delivery system. An anti-inflammatory drug, indomethacin was loaded into the formed hydrogels as a model drug. The resulting gel samples were characterized by Fourier transforms infrared (FTIR) spectroscopy, thermo-gravimetric (TG) analysis, and scanning electron microscopy (SEM). The mechanical stability of all samples in phosphate buffered solution (PBS, pH 7.4) was approximately measured through oscillation experiments. Swelling and controlled drug release behaviors of ALG@CMC beads compared with ALG were studied in simulating gastric fluid of pH 1.2 or intestinal fluid of pH 7.4 at 37 °C. Oscillation experiments proved that the mechanical stability of ALG@CMC beads could be significantly improved by the CMC shell layer. The swelling and drug release behaviors revealed that the swelling and drug release rate of ALG@CMC beads were obviously slower than that of simple-ALG and both have significant pH responsiveness. The cumulative drug release from ALG, ALG@CMC-1, ALG@CMC-2 and ALG@CMC-3 was about 100%, 67%, 46% and 37% in simulated intestinal fluid of pH 7.4, respectively, while the drug release reached only about 2.0% in simulating gastric fluid of pH 1.2 within 720 min. These developed materials could potentially be employed as a pH-responsive drug delivery device in vivo.[Formula: see text].

Bio-functional hydrogel membranes loaded with chitosan nanoparticles for accelerated wound healing

Wounds are often recalcitrant to traditional wound dressings and a bioactive and biodegradable wound dressing using hydrogel membranes can be a promising approach for wound healing applications. The present research aimed to design hydrogel membranes based on hyaluronic acid, pullulan and polyvinyl alcohol and loaded with chitosan based cefepime nanoparticles for potential use in cutaneous wound healing. The developed membranes were evaluated using dynamic light scattering, proton nuclear magnetic resonance, Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy. The results indicated the novel crosslinking and thermal stability of the fabricated hydrogel membrane. The in vitro analysis demonstrates that the developed membrane has water vapors transmission rate (WVTR) between 2000 and 2500 g/m²/day and oxygen permeability between 7 and 14 mg/L, which lies in the range of an ideal dressing. The swelling capacity and surface porosity to liberate encapsulated drug (cefepime) in a sustained manner and 88% of drug release was observed. The cefepime loaded hydrogel membrane demonstrated a higher zone of inhibition against Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli and excisional rat model exhibit expeditious recovery rate. The developed hydrogel membrane loaded with cefepime nanoparticles is a promising approach for topical application and has greater potential for an accelerated wound healing process.

Sodium alginate-based composites as a collagen substitute for skin bioengineering

The skin is a combination of two different types of tissue-epithelial and connective (mesenchymal). The outer protective layer of the skin, the epidermis, consists of multiple layers of keratinocytes residing on the basement membrane that separates them from the underlying dermis, which consists of a well-vascularized fibrous extracellular matrix seeded mainly by fibroblasts and mesenchymal stromal cells. These skin features suggest that the development of a fibroblast-friendly porous scaffold covered with a flat dense sheath mimicking the basement membrane, and sufficient to support keratinocyte attachment, would be a reasonable approach in the generation of clinically-relevant skin substitutes useful for reconstructive dermatology and burn treatment. Therefore, we developed a procedure to obtain biocompatible composite bilayer scaffolds comprising a spongy dermis-like body (supporting vascularization and appropriate fibroblast and multipotent stromal cell activity) fused with a film-like cover (supporting keratinocyte attachment, growth and differentiation). The sodium alginate (SA), an algae-derived biopolymer, has been used as a base component for these scaffolds while collagen (CL) and fibrinogen (FG) were used as minor additives in variable concentrations. The slow rates of composite SA-based scaffold biodegradation were achieved by using Ba²⁺ as cross-linking cations. By manipulating the SA/CL/FG ratio we managed to obtain sponge scaffolds with highly interconnected porous structures, with an average pore size ranging from 60 to 300 μm, and sufficient tensile strength (3.12-5.26 MPa). The scaffolds biocompatibility with the major human skin cell types was confirmed by seeding the scaffold sponge compartment with primary skin fibroblasts and subcutaneous adipose-derived stromal cells while the film side biocompatibility was tested using primary human keratinocytes. The obtained results have shown that bilayer alginate-based scaffolds have biological and mechanical properties comparable with CL scaffolds but surpass them in cost efficiency and vascularization ability in the subcutaneous implantation model in laboratory mice.

Three dimensional printed bioglass/gelatin/alginate composite scaffolds with promoted mechanical strength, biomineralization, cell responses and osteogenesis

In this study, porous bioglass/gelatin/alginate bone tissue engineering scaffolds were fabricated by three-dimensional printing. The compressive strength and in vitro biomineralization properties of the bioglass-gelatin-alginate scaffolds (BG/Gel/SA scaffolds) were significantly improved with the increase of bioglass content until 30% weight percentage followed by a rapid decline in strength. In addition, the cells attach and spread on the BG/Gel/SA scaffolds surfaces represents good adhesion and biocompatibility. Furthermore, the cells (rat bone marrow mesenchymal stem cells, mBMSCs) proliferation and osteogenic differentiation on the BG/Gel/SA scaffolds were also promoted with the increase of bioglass content. Overall, the adding of bioglass in Gel/SA scaffolds promotes mechanical strength and in vitro osteogenic properties and the 30 BG scaffold (30%wt BG) has potential applications in bone tissue engineering and bone regenerative repair because of good compressive strength, biocompatibility, and in vitro osteogenesis.

Glycosaminoglycan-Inspired Biomaterials for the Development of Bioactive Hydrogel Networks

Glycosaminoglycans (GAG) are long, linear polysaccharides that display a wide range of relevant biological roles. Particularly, in the extracellular matrix (ECM) GAG specifically interact with other biological molecules, such as growth factors, protecting them from proteolysis or inhibiting factors. Additionally, ECM GAG are partially responsible for the mechanical stability of tissues due to their capacity to retain high amounts of water, enabling hydration of the ECM and rendering it resistant to compressive forces. In this review, the use of GAG for developing hydrogel networks with improved biological activity and/or mechanical properties is discussed. Greater focus is given to strategies involving the production of hydrogels that are composed of GAG alone or in combination with other materials. Additionally, approaches used to introduce GAG-inspired features in biomaterials of different sources will also be presented.

Carboxymethyl cellulose-human hair keratin hydrogel with controlled clindamycin release as antibacterial wound dressing

This study offers a new antibacterial wound dressing from carboxymethyl cellulose (CMC)-human hair keratin with topical clindamycin delivery. Keratin was successfully extracted from human hair. Different sponges fabricated by changing CMC to keratin ratio were characterized and compared. Halloysite nanotubes were used as carriers to control the clindamycin release. Various characterization techniques were used to determine the effects of keratin addition on the structure, morphology, physical properties, drug release, antibacterial activity, and cellular behavior of CMC hydrogels. As proved by SEM and EDS, porous structure with interconnected pores was successfully formed and clindamycin-loaded HNTs were uniformly dispersed within the porous structures. Increasing the keratin in CMC hydrogel not only lowered its water vapor transmission rate to a suitable range for wound healing but also improved the water stability of CMC hydrogel. The in vitro release study indicated that clindamycin was released slower in samples containing higher keratin and the Fickian diffusion mechanism controlled their release profile. The fabricated dressing effectively inhibits S. aureus bacterial colonies growth after 24 h. Fibroblast culturing on the fabricated sponges indicated that cellular attachment, proliferation, and spreading were significantly enhanced with increasing the keratin amount.

Effects of Sapindus mukorossi Seed Oil on Skin Wound Healing: In Vivo and in Vitro Testing

Sapindus mukorossi seed oil is commonly used as a source for biodiesel fuel. Its phytochemical composition is similar to the extracted oil from Sapindus trifoliatus seeds, which exhibit beneficial effects for skin wound healing. Since S. mukorossi seed shows no cyanogenic property, it could be a potential candidate for the treatment of skin wounds. Thus, we evaluated the effectiveness of S. mukorossi seed oil in the treatment of skin wounds. We characterized and quantified the fatty acids and unsaponifiable fractions (including β-sitosterol and δ-tocopherol) contained in S. mukorossi seed-extracted oil by GC-MS and HPLC, respectively. Cell proliferation and migratory ability were evaluated by cell viability and scratch experiments using CCD-966SK cells treated with S. mukorossi oil. The anti-inflammatory effects of the oil were evaluated by measuring the nitric oxide (NO) production in lipopolysaccharide-treated RAW 264.7 cells. Antimicrobial activity tests were performed with Propionibacterium acnes, Staphylococcus aureus, and Candida albicans using a modified Japanese Industrial Standard procedure. Uniform artificial wounds were created on the dorsum of rats. The wounds were treated with a carboxymethyl cellulose (CMC)/hyaluronic acid (HA)/sodium alginate (SA) hydrogel for releasing the S. mukorossi seed oil. The wound sizes were measured photographically for 12 days and were compared to wounds covered with analogous membranes containing a saline solution. Our results showed that the S. mukorossi seed oil used in this study contains abundant monounsaturated fatty acids, β-sitosterol, and δ-tocopherol. In the in vitro tests, S. mukorossi seed oil prompted cell proliferation and migration capability. Additionally, the oil had significant anti-inflammatory and anti-microbial activities. In the in vivo animal experiments, S. mukorossi seed oil-treated wounds revealed acceleration of sequential skin wound healing events after two days of healing. The size of oil-treated wound decreased to half the size of the untreated control after eight days of healing. The results suggest that S. mukorossi seed oil could be a potential source for promoting skin wound healing.

Recent Advances in the Use of Algal Polysaccharides for Skin Wound Healing

BACKGROUND

Chronic skin wounds and pressure ulcers represent major health care problems in diabetic individuals, as well as patients who suffered a spinal cord injury. Current treatment methods are only partially effective and such wounds exhibit a high recurrence rate. Open wounds are at high risk of invasive wound infections, which can lead to amputation and further disability. An interdisciplinary approach is needed to develop new and more effective therapies.

METHODS

The purpose of this work is to review recent studies focusing on the use of algal polysaccharides in commercially available as well as experimental wound dressings. Studies that discuss wound dressings based on algal polysaccharides, some of which also contain growth factors and even living cells, were identified and included in this review.

RESULTS AND CONCLUSION

Algal polysaccharides possess mechanical and physical properties, along with excellent biocompatibility and biodegradability that make them suitable for a variety of applications as wound dressings. Furthermore, algal polysaccharides have been used for a dual purpose, namely as wound covering, but also as a vehicle for drug delivery to the wound site.

Enhanced cellular response elicited by addition of amniotic fluid to alginate hydrogel-electrospun silk fibroin fibers for potential wound dressing application

This study aimed to evaluate a novel bioactive wound dressing from alginate hydrogel-electrospun silk fibroin (SF) fibers with the ability to deliver amniotic fluid (AF) to the wound site. AF is highly enriched with multiple therapeutic agents that can promote cellular response and wound healing. In this study, electrospun SF fibers were first fabricated by electrospinning method and then combined with the alginate hydrogel (ALG) containing AF. Different dressings were made by changing the alginate to AF ratio. The scanning electron microscopy images revealed that SF fibers were fully covered with alginate hydrogel. In addition, the modulus of the dressing decreased by lowering ALG/AF ratios, while a reverse trend was observed for the elongation-at-break. In vitro AF release profiles indicated that an increase in the concentration of ALG leads to a reduction in the AF amount. Fibroblast culturing on the fabricated dressings demonstrated that cellular proliferation, spreading, and secretion of collagen enhanced with increasing AF. Taken together, our results provide a novel bioactive dressing with great potentials for speeding up the healing process in severe wounds.

Alginate in Wound Dressings

Alginate is a biopolymer used in a variety of biomedical applications due to its favourable properties, such as biocompatibility and non-toxicity. It has been particularly attractive in wound healing applications to date. It can be tailored to materials with properties suitable for wound healing. Alginate has been used to prepare different forms of materials for wound dressings, such as hydrogels, films, wafers, foams, nanofibres, and in topical formulations. The wound dressings prepared from alginate are able to absorb excess wound fluid, maintain a physiologically moist environment, and minimize bacterial infections at the wound site. The therapeutic efficacy of these wound dressings is influenced by the ratio of other polymers used in combination with alginate, the nature of cross linkers used, the time of crosslinking, nature of excipients used, the incorporation of nanoparticles, and antibacterial agents. This review provides a comprehensive overview of the different forms of wound dressings containing alginate, in vitro, and in vivo results.