Visible colour displacement sensing system for manganese(II)

Electrochemical detection of manganese ions using aptamer-based layers

Heavy metals are one of the major pollutants found in drinking water and their abnormal level may pose a threat to human's health and life. Manganese also belongs to heavy metals group, and it is generally used in production of batteries, fertilizers, and ceramics. Even though, Mn is necessary for proper development of central nervous system, its elevated concentration might lead to certain diseases such as epilepsies, cell death in focal cerebral ischemia as well as neurodegenerative diseases such as Huntington and Alzheimer. Hence, it is crucial to elaborate novel methods for manganese ions detection that could be applied for in situ analysis of water samples. Herein, we present the studies on the electrochemical detection of manganese ions using aptamer-modified electrodes. This is the first attempt of application of aptamer strands as receptor layers for electrochemical analysis of manganese ions and for that purpose gold disk electrodes served as transducers, which were further modified with disulfide - based aptamers and 6-mercapto-1-hexanol blocking agent. The electrochemical measurements concerned the choice of the conditions for formation of aptamer receptor layer as well as the type of redox indicator that served as the source of current signal. The studies referred to the definition of aptasensor working parameters including the verification of the possibility of manganese ion detection in cell culture media. It was shown that it was possible to detect Mn2+ ions within 25 nM-1 μM concentration and the proposed aptasensor exhibited high selectivity towards target analyte for which at least 2 - times higher response was recorded than for interfering ions. Moreover, the possibility of Mn2+ detection in real samples was depicted followed by stability and regeneration studies.

Development of Mn2+-Specific Biosensor Using G-Quadruplex-Based DNA

Metal ions are used in various situations in living organisms and as a part of functional materials. Since the excessive intake of metal ions can cause health hazards and environmental pollution, the development of new molecules that can monitor metal ion concentrations with high sensitivity and selectivity is strongly desired. DNA can form various structures, and these structures and their properties have been used in a wide range of fields, including materials, sensors, and drugs. Guanine-rich sequences respond to metal ions and form G-quadruplex structures and G-wires, which are the self-assembling macromolecules of G-quadruplex structures. Therefore, guanine-rich DNA can be applied to a metal ion-detection sensor and functional materials. In this study, the IRDAptamer library originally designed based on G-quadruplex structures was used to screen for Mn²⁺, which is known to induce neurodegenerative diseases. Circular dichroism and fluorescence analysis using Thioflavin T showed that the identified IRDAptamer sequence designated MnG4C1 forms a non-canonical G-quadruplex structure in response to low concentrations of Mn²⁺. A serum resistance and thermostability analysis revealed that MnG4C1 acquired stability in a Mn²⁺-dependent manner. A Förster resonance energy transfer (FRET) system using fluorescent molecules attached to the termini of MnG4C1 showed that FRET was effectively induced based on Mn²⁺-dependent conformational changes, and the limit of detection (LOD) was 0.76 µM for Mn²⁺. These results suggested that MnG4C1 can be used as a novel DNA-based Mn²⁺-detecting molecule.

Vivid COVID-19 LAMP is an ultrasensitive, quadruplexed test using LNA-modified primers and a zinc ion and 5-Br-PAPS colorimetric detection system

Sensitive and rapid point-of-care assays have been crucial in the global response to SARS-CoV-2. Loop-mediated isothermal amplification (LAMP) has emerged as an important diagnostic tool given its simplicity and minimal equipment requirements, although limitations exist regarding sensitivity and the methods used to detect reaction products. We describe the development of Vivid COVID-19 LAMP, which leverages a metallochromic detection system utilizing zinc ions and a zinc sensor, 5-Br-PAPS, to circumvent the limitations of classic detection systems dependent on pH indicators or magnesium chelators. We make important strides in improving RT-LAMP sensitivity by establishing principles for using LNA-modified LAMP primers, multiplexing, and conducting extensive optimizations of reaction parameters. To enable point-of-care testing, we introduce a rapid sample inactivation procedure without RNA extraction that is compatible with self-collected, non-invasive gargle samples. Our quadruplexed assay (targeting E, N, ORF1a, and RdRP) reliably detects 1 RNA copy/µl of sample (=8 copies/reaction) from extracted RNA and 2 RNA copies/µl of sample (=16 copies/reaction) directly from gargle samples, making it one of the most sensitive RT-LAMP tests and even comparable to RT-qPCR. Additionally, we demonstrate a self-contained, mobile version of our assay in a variety of high-throughput field testing scenarios on nearly 9,000 crude gargle samples. Vivid COVID-19 LAMP can be an important asset for the endemic phase of COVID-19 as well as preparing for future pandemics.

Rapid and green detection of manganese in electrolytes by ultraviolet-visible spectrometry to control pollutant discharge

Controlling the manganese (Mn²⁺) concentration is important to product quality in the electrolytic manganese industry. Conventional methods for detecting Mn²⁺ are complex and reagent-consuming, which makes them slow and polluting. It is of great significance to develop a new fast and environmentally friendly method to quantify Mn²⁺ in electrolyte. The characteristic ultraviolet-visible (UV-vis) absorbance at 401 nm of Mn²⁺ will vary linearly with the Mn²⁺ concentration after data correction. Adjusting the pH, calibrating the spectral bandwidth (SBW) and optical path length (OPL), and subtracting the interference from coexisting substances by linear interpolation improve the measuring accuracy. Mn²⁺ concentration can be determined by direct fast UV-vis absorbance measurement at characteristic peaks without using harmful reagents which facilitates such measurement to be applicated as on-line detection method for electrolytic manganese industry. The method developed in this study will help achieve the goal of improving the detection speed while cutting back on pollutant discharge from concentration analysis process in electrolytic manganese industry.

Zinc(ii), copper(ii) and cadmium(ii) complexes as fluorescent chemosensors for cations

The fluorescence chemosensing behavior of Zn(ii), Cu(ii), and Cd(ii) based complexes toward cations has been described. Cation detection via conventional mechanisms, metal-metal exchange and chemodosimetric approaches along with the importance of metal ions and the scope, significance, and challenges with regard to the detection of cations by metal complex based probes will be discussed in detail. The fundamentals of photophysical behavior and mechanisms involved in the fluorescence detection of analytes will also be described. This article provides a detailed overview of Zn(ii), Cu(ii), and Cd(ii) based complexes as fluorescent probes for cations, together with essential discussions pertaining to detection mechanisms.

Click-Type Protein-DNA Conjugation for Mn2+ Imaging in Living Cells

A click-type protein-DNA conjugation, named as MnDDC (Mn²⁺-activated DCV-DNA conjunction), is presented, where DCV (rep protein of duck circovirus) and its target DNA work as the modular blocks to rapidly and effectively generate Mn²⁺-dependent and site-specific protein-DNA linkage. On the basis of MnDCC, a fluorescent Mn²⁺ biosensor composed of DCV and a molecular beacon, was developed for rapid sensing of Mn²⁺ within 2 min with nanomolar sensitivity. Using the proposed biosensor, not only analysis of Mn²⁺ in real samples (e.g., serum and food), but also wash-free fluorescent imaging of Mn²⁺ in extracellular environment and cytoplasm have been achieved. Moreover, the MnDDC-based sensor was proved to be a powerful tool for visualization of Mn²⁺ during exploration of the associated cytotoxicity in living neural cells, which is helpful to reveal the cellular responses toward the disordered homeostasis of Mn²⁺ in both extracellular and intracellular microenvironments.

Potentially toxic elements and environmentally-related pollutants recognition using colorimetric and ratiometric fluorescent probes

A safer detection or sensing of toxic pollutants is one among several environmental contamination issues, across the globe. The ever-increasing industrial practices and controlled or uncontrolled release of toxic pollutants from various industrial sectors is a key source of this environmental problem. Significant research efforts have been or being made to tackle this problematic issue to fulfill the growing needs of the modern world. Despite many useful aspects, heavy metals are posing noteworthy toxicological concerns and human-health related issues at various levels of the ecosystem. In this context, notable efforts from various regulatory authorities, the increase in the concentration of these toxic heavy metals in the environment is of serious concern, so real-time monitoring is urgently required. Herein, we reviewed fluorescent sensor based models and their potentialities to address the detection fate of hazardous pollutants including chromium, manganese, cobalt, nickel, copper, and zinc as model elements. The novel aspects of turn-on/off fluorescent sensors have also been discussed from a state of the art viewpoint. In summary, comprehensive literature regarding fluorescent sensor based models and their potentialities to detect various types of toxic pollutants is reviewed.

Fluorescent sensor for Al3+ ion in partially aqueous media using julolidine based probe

A novel chemosensor was synthesised and used as a selective fluorescent sensor for aluminium ions.

Distinction between Mn(iii) and Mn(ii) by using a colorimetric chemosensor in aqueous solution

A new colorimetric chemosensor for Mn(iii) and Mn(ii) was developed and used to differentiate between Mn(iii) and Mn(ii).

Aminomethylpyrene-based imino-phenols as primary fluorescence switch-on sensors for Al3+ in solution and in Vero cells and their complexes as secondary recognition ensembles toward pyrophosphate

Three aminomethylpyrene-based salicyl-imines, viz.L1, L2 and L3 were designed and synthesized for Al³⁺ ion sensing.

Fluorescent metal ion chemosensors via cation exchange reactions of complexes, quantum dots, and metal–organic frameworks

Overview of a new paradigm in the design of fluorescent chemosensors for detecting metal ions via cation exchange reactions of complexes, quantum dots, and metal–organic frameworks.

Fluorescent, MRI, and colorimetric chemical sensors for the first-row d-block metal ions

Transition metals (d-blocks) are recognized as playing critical roles in biology, and they most often act as cofactors in diverse enzymes; however, improper regulation of transition metal stores is also connected to serious disorders. Therefore, the monitoring and imaging of transition metals are significant for biological research as well as clinical diagnosis. In this article, efforts have been made to review the chemical sensors that have been developed for the detection of the first-row d-block metals (except Cu and Zn): Cr, Mn, Fe, Co, and Ni. We focus on the development of fluorescent sensors (fall into three classes: "turn-off", "turn-on", and ratiometric), colorimetric sensors, and responsive MRI contrast agents for these transition metals (242 references). Future work will be likely to fill in the blanks: (1) sensors for Sc, Ti, and V; (2) MRI sensors for Cr, Mn, Co, Ni; (3) ratiometric fluorescent sensors for Cr(6+), Mn(2+), and Ni(2+), explore new ways of sensing Fe(3+) or Cr(3+) without the proton interference, as well as extend applications of MRI sensors to living systems.

Selectively sensing first-row transition metal ions through fluorescence enhancement

Fluorescence signaling systems that give enhancement in the presence of first-row transition metal ions are discussed.

Supramolecular metal displacement allows on-fluorescence analysis of manganese(II) in living cells

Due to the importance of Mn(2+) ions in biological processes, it is of growing interest to develop protocols for analysis of Mn(2+) uptake and distribution in cells. A supramolecular metal displacement assay can provide ratiometric fluorescence detection of Mn(2+), allowing for quantitative and longitudinal analysis of Mn(2+) uptake in living cells.