Effect of microneedle on the pharmacokinetics of ketoprofen from its transdermal formulations

Pharmacokinetic differences between subcutaneous injection and intradermal microneedle delivery of protein therapeutics

Protein therapeutics are essential in the treatment of various diseases, but most of them require parenteral administration. Since intravenous and subcutaneous injections are associated with discomfort and pain, other routes have been investigated including intradermal microneedle delivery. Microneedles are shorter than hypodermic needles and therefore minimize contact with pain receptors in deeper skin layers. But the differences in anatomical and physiological characteristics of dermis and subcutis can potentially result in varying protein penetration through the skin, absorption, and metabolism. This review summarizes pharmacokinetic studies that compare the administration of protein therapeutics by subcutaneous injections and different types of microneedles intradermally including hollow, dissolvable, coated, and hydrogel-forming microneedles. Across animal and human studies, hollow microneedle delivery resulted in quicker and higher peak plasma levels of proteins and comparable bioavailability to subcutaneous injections potentially due to the extensive network of lymphatic and blood vessels in the dermis. In case of dissolvable and coated microneedles, drug release kinetics depend on component materials. The dissolution of polymer excipients can slow the release and permeation of protein therapeutics at the administration site and thereby delay absorption. The understanding of drug penetration through different skin layers, its absorption into blood capillaries or lymphatics, and dermal metabolism remains limited. Additionally, the effects of these processes on the differences in pharmacokinetic profiles of proteins following intradermal microneedle administration are not well understood. Greater insights are required for the development of the next generation of intradermal microneedle biotherapeutics.

Dual engine-driven bionic microneedles for early intervention and prolonged treatment of Alzheimer's disease

The microneedle (MN) delivery system presents an attractive administration route for patients with Alzheimer's disease (AD). However, the passive drug delivery mode and low drug loading of MNs often result in unsatisfactory therapeutic efficiency. To address these dilemmas, we developed dual engine-drive bionic MNs for robust AD treatment. Specifically, free rivastigmine (RVT) and RVT particles were co-loaded within the MNs to construct the valve and chambers of the guava, respectively, which can serve as an active engine to promote drug permeation by generating capillary force. K2CO3 and citric acid were introduced as a pneumatic engine into the MNs to promote the permeation of free RVT into deeper skin layers for early intervention in AD. Further, the RVT particles served as a drug depot to provide continuous drug release for prolonged AD treatment. Compared with free RVT-loaded MNs, the dual engine-driven bionic MNs showed an increase in drug loading, cumulative transdermal permeability, and normalized bioavailability of approximately 40%, 22%, and 49%, respectively. Pharmacodynamic studies further confirmed that the dual engine-driven bionic MNs were most effective in restoring memory and recognition functions in mice with short-term memory dysfunction. Therefore, the dual engine-driven bionic MNs hold great promise for highly efficient AD treatment.

Advances in microneedle-based therapy for bone disorders

Bone-related disorders treatment is a serious public health concern, imposing a significant social and economic burden on patients and healthcare systems. Although conventional drug delivery systems have made advances in bone diseases prevention and management, the limited delivery efficiency and convoluted focal environment lead to inadequate drug absorption and lack of specificity to achieve the intended therapeutic impact. Microneedle-based therapy represents an extraordinarily safe and well-tolerable therapeutic approach for treating bone disorders, providing improved efficacy by breaking down the barriers and delivery of therapeutic components to the target sites with programable release profiles in a less invasive manner. Over the past decades, numerous significant achievements in the development of various types of drug-carried microneedles have been made to address the obstacles encountered in the bone-treating procedure, enabling the microneedle-based therapy to take an important step in practical applications. In this light, this review summarizes these remarkable researches in terms of microneedles types and drug delivery strategies, with the goal of demonstrating the benefits of exploiting microneedle-based therapy as a novel strategy for treating bone-related disorders. The remaining challenges and future perspectives are also discussed in the hope of inspiring more efficient and intelligent bone treatment strategies.

Dissolvable Carboxymethylcellulose Microneedles for Noninvasive and Rapid Administration of Diclofenac Sodium

The aim of this study is to prepare dissolvable biopolymeric microneedle (MN) patches composed solely of sodium carboxymethylcellulose (CMC), a water-soluble cellulose derivative with good film-forming ability, by micromolding technology for the transdermal delivery of diclofenac sodium salt (DCF). The MNs with ≈456 µm in height displayed adequate morphology, thermal stability up to 200 °C, and the required mechanical strength for skin insertion (>0.15 N needle^-1 ). Experiments in ex vivo abdominal human skin demonstrate the insertion capability of the CMC_DCF MNs up to 401 µm in depth. The dissolution of the patches in saline buffer results in a maximum cumulative release of 98% of diclofenac after 40 min, and insertion in a skin simulant reveals that all MNs completely dissolve within 10 min. Moreover, the MN patches are noncytotoxic toward human keratinocytes. These results suggest that the MN patches produced with CMC are promising biopolymeric systems for the rapid administration of DCF in a minimally invasive manner.

Promising Strategies for Transdermal Delivery of Arthritis Drugs: Microneedle Systems

Arthritis is a general term for various types of inflammatory joint diseases. The most common clinical conditions are mainly represented by rheumatoid arthritis and osteoarthritis, which affect more than 4% of people worldwide and seriously limit their mobility. Arthritis medication generally requires long-term application, while conventional administrations by oral delivery or injections may cause gastrointestinal side effects and are inconvenient for patients during long-term application. Emerging microneedle (MN) technology in recent years has created new avenues of transdermal delivery for arthritis drugs due to its advantages of painless skin perforation and efficient local delivery. This review summarizes various types of arthritis and current therapeutic agents. The current development of MNs in the delivery of arthritis drugs is highlighted, demonstrating their capabilities in achieving different drug release profiles through different self-enhancement methods or the incorporation of nanocarriers. Furthermore, the challenges of translating MNs from laboratory studies to the clinical practice and the marketplace are discussed. This promising technology provides a new approach to the current drug delivery paradigm in treating arthritis in transdermal delivery.

Dissolving microneedles: Applications and growing therapeutic potential

Microneedles are a rapidly developing method for the transdermal delivery of therapeutic compounds. All types of microneedles, whether solid, hollow, coated, or dissolving function by penetrating the stratum corneum layer of the skin producing a microchannel through which therapeutic agents may be delivered. To date, coated and hollow microneedles have been the most successful, despite suffering from issues such as poor drug loading capabilities and blocked pores. Dissolving microneedles, on the other hand, have superior drug loading as well as other positive attributes that make it an ideal delivery system, including simple methods of fabrication and disposal, and abundantly available materials. Indeed, dissolvable microneedles can even be fabricated entirely from the therapeutic agent itself thus eliminating the requirement for additional excipients. This focused review presents the recent developments and trends of dissolving microneedles as well as potential future directions. The advantages, and disadvantages of dissolving microneedles as well as fabrication materials and methods are discussed. The potential applications of dissolving microneedles as a drug delivery system in different therapeutic areas in both research literature and clinical trials is highlighted. Applications including the delivery of cosmetics, vaccine delivery, diagnosis and monitoring, cancer, pain and inflammation, diabetes, hair and scalp disorders and inflammatory skin diseases are presented. The current trends observed in the microneedle landscape with particular emphasis on contemporary clinical trials and commercial successes as well as barriers impeding microneedle development and commercialisation are also discussed.

Emerging trends in microneedle-based drug delivery strategies for the treatment of rheumatoid arthritis

INTRODUCTION

The current drug therapies for treating Rheumatoid Arthritis (RA) include NSAIDs, DMARDs, or biological products designed to mitigate the symptoms of the disease. These therapies with conventional delivery systems possess limitations such as lack of selectivity and adverse effects in the extra-articular tissues. Microneedles-based transdermal drug delivery gained huge attention that can overcome the limitations associated with conventional preparations.

AREAS COVERED

This review aims to provide detailed information on types of Microneedles (MNs) and their usage in drug delivery for the management of Rheumatoid Arthritis. In addition, it also provides evidence for the effective use of MNs in RA treatment. Various types of MNs, their regulatory status, clinical trials and patents are also compiled in this review.

EXPERT OPINION

Microneedles are small patch-like structures consisting of needles in micron range arranged in array-like structure, used to manage drugs designed to be given via transdermal route. Microneedles provide painless delivery, fast onset of action, bypass the first-pass metabolism and be easily self-administered. In the case of RA treatment, which requires a long-term application of drugs, MNs is a new and emerging way to ease the symptoms of RA.

Novel transdermal device for delivery of triamcinolone for nail psoriasis treatment

ABSTRACT Introduction: Nail psoriasis treatment is challenging due to difficult drug delivery and systemic therapy toxicities. Self-dissolvable microneedle patches embedded with corticosteroids offers a potentially rapid, minimally invasive drug delivery platform with good efficacy and minimal adverse side effects. Methods: We conducted a 4-month prospective randomised controlled trial. Subjects with psoriatic nails were randomised to receive microneedle device delivered topical steroids on one hand and control treatment (topical Daivobet gel) on the other. Two independent dermatologists blinded to the treatment assignment scored their Nail Psoriasis Severity Index (NAPSI) during visits at baseline, 2 and 4 months. All treatment was discontinued after 2 months. Average NAPSI score on each hand was analysed. Results: A total of 25 participants were recruited, aged 22 to 73 years. Majority were Chinese (72%), followed by Indian and Malay. There was equal randomisation of treatment to the left and right nail. While there was a rapid significant improvement in average NAPSI score for the control arm at 2 months, the treatment arm had a greater, more sustained improvement of the NAPSI score at 4 months. The average NAPSI score improved for both treatment and control group at 4 months compared to baseline. However, only the NAPSI value improvement in the controls at 2 months compared to baseline was statistically significant (P=0.0039). No severe adverse effects were reported. Conclusion: To the best of our knowledge, this is the first prospective randomised control trial comparing microneedle technology against conventional topical steroids in nail psoriasis treatment. Our findings demonstrate microneedle technology is as efficacious as topical therapy. Keywords: Microneedle, nail, psoriasis

Translation of Polymeric Microneedles for Treatment of Human Diseases: Recent Trends, Progress, and Challenges

The ongoing search for biodegradable and biocompatible microneedles (MNs) that are strong enough to penetrate skin barriers, easy to prepare, and can be translated for clinical use continues. As such, this review paper is focused upon discussing the key points (e.g., choice polymeric MNs) for the translation of MNs from laboratory to clinical practice. The review reveals that polymers are most appropriately used for dissolvable and swellable MNs due to their wide range of tunable properties and that natural polymers are an ideal material choice as they structurally mimic native cellular environments. It has also been concluded that natural and synthetic polymer combinations are useful as polymers usually lack mechanical strength, stability, or other desired properties for the fabrication and insertion of MNs. This review evaluates fabrication methods and materials choice, disease and health conditions, clinical challenges, and the future of MNs in public healthcare services, focusing on literature from the last decade.

Microneedles: a potential strategy in transdermal delivery and application in the management of psoriasis

Microneedles, as an updating approach delivering compounds through the skin, is potential in the management of psoriasis.

Combination with l-Menthol Enhances Transdermal Penetration of Indomethacin Solid Nanoparticles

This study designed the transdermal formulations containing indomethacin (IMC)—1% IMC was crushed with 0.5% methylcellulose and 5% 2-hydroxypropyl-β-cyclodextrin by the bead mill method, and the milled IMC was gelled with or without 2% l-menthol (a permeation enhancer) by Carbopol^® 934 (without menthol, N-IMC gel; with menthol, N-IMC/MT gel). In addition, the drug release, skin penetration and percutaneous absorption of the N-IMC/MT gel were investigated. The particle sizes of N-IMC gel were approximately 50–200 nm, and the combination with l-menthol did not affect the particle characterization of the transdermal formulations. In an in vitro experiment using a Franz diffusion cell, the skin penetration in N-IMC/MT gel was enhanced than the N-IMC gel, and the percutaneous absorption (AUC) from the N-IMC/MT gel was 2-fold higher than the N-IMC gel. On the other hand, the skin penetration from the N-IMC/MT gel was remarkably attenuated at a 4 °C condition, a temperature that inhibits all energy-dependent endocytosis. In conclusion, this study designed transdermal formulations containing IMC solid nanoparticles and l-menthol, and found that the combination with l-menthol enhanced the skin penetration of the IMC solid nanoparticles. In addition, the energy-dependency of the skin penetration of IMC solid nanoparticles was demonstrated. These findings suggest the utility of a transdermal drug delivery system to provide the easy application of solid nanoparticles (SNPs).

Design of a transdermal formulation containing raloxifene nanoparticles for osteoporosis treatment

Purpose

In the clinical setting, raloxifene, a second-generation selective estrogen receptor modulator, is administered orally; however, the bioavailability (BA) is only 2% because of its poor solubility in aqueous fluids and its extensive first-pass metabolism. Therefore, it is expected that the development of a transdermally delivered formulation may reduce the necessary dose without compromising its therapeutic efficacy. In this study, we designed transdermal formulations containing raloxifene nanoparticles and evaluated their usefulness for osteoporosis therapy.

Methods

Raloxifene was crushed with methylcellulose by the bead mill method, and the milled raloxifene was gelled with or without menthol (a permeation enhancer) by Carbopol^® 934 (without menthol, Ral-NPs; with menthol, mRal-NPs). The drug release and transdermal penetration were measured using a Franz diffusion cell, and the therapeutic evaluation of osteoporosis was determined in an ovariectomized rat model.

Results

The mean particle size of raloxifene in the transdermal formulation (Ral-NPs) was 173.7 nm. Although the raloxifene released from Ral-NPs remained in the nanoparticle state, the skin penetration of raloxifene nanoparticles was prevented by the stratum corneum in rat. On the other hand, inclusion of menthol in the formulation attenuated the barrier function of the stratum corneum and permitted the penetration of raloxifene nanoparticles through the skin. Moreover, macropinocytosis relates to the skin penetration of the formulation including menthol (mRal-NPs), since penetration was inhibited by treatment with 2 µM rottlerin, a macropinocytosis inhibitor. In addition, the application of 0.3% mRal-NPs (once a day) attenuated the decreases in calcium level and stiffness of the bones of ovariectomized rat.

Conclusion

We prepared raloxifene solid nanoparticles by a bead mill method and designed a novel transdermal formulation containing nanoparticles and permeation enhancers. These trans-dermal formulations overcome the barrier properties of the skin and show high drug penetration through the transdermal route (BA 8.5%). In addition, we found that raloxifene transdermal formulations are useful for the treatment of osteoporosis in ovariectomized rat.

Involvement of Endocytosis in the Transdermal Penetration Mechanism of Ketoprofen Nanoparticles

We previously designed a novel transdermal formulation containing ketoprofen solid nanoparticles (KET-NPs formulation), and showed that the skin penetration from the KET-NPs formulation was higher than that of a transdermal formulation containing ketoprofen microparticles (KET-MPs formulation). However, the precise mechanism for the skin penetration from the KET-NPs formulation was not clear. In this study we investigated whether energy-dependent endocytosis relates to the transdermal delivery from a 1.5% KET-NPs formulation. Transdermal formulations were prepared by a bead mill method using additives including methylcellulose and carbopol 934. The mean particle size of the ketoprofen nanoparticles was 98.3 nm. Four inhibitors of endocytosis dissolved in 0.5% DMSO (54 μM nystatin, a caveolae-mediated endocytosis inhibitor; 40 μM dynasore, a clathrin-mediated endocytosis inhibitor; 2 μM rottlerin, a macropinocytosis inhibitor; 10 μM cytochalasin D, a phagocytosis inhibitor) were used in this study. In the transdermal penetration study using a Franz diffusion cell, skin penetration through rat skin treated with cytochalasin D was similar to the control (DMSO) group. In contrast to the results for cytochalasin D, skin penetration from the KET-NPs formulation was significantly decreased by treatment with nystatin, dynasore or rottlerin with penetrated ketoprofen concentration-time curves (AUC) values 65%, 69% and 73% of control, respectively. Furthermore, multi-treatment with all three inhibitors (nystatin, dynasore and rottlerin) strongly suppressed the skin penetration from the KET-NPs formulation with an AUC value 13.4% that of the control. In conclusion, we found that caveolae-mediated endocytosis, clathrin-mediated endocytosis and macropinocytosis are all related to the skin penetration from the KET-NPs formulation. These findings provide significant information for the design of nanomedicines in transdermal formulations.

Therapeutic applications and pharmacoeconomics of microneedle technology

INTRODUCTION

Microneedle (MN) arrays contain a backing plate with multiple microscopic projections to puncture the skin and can be used to deliver drug in a minimally invasive way. Advantages of MNs are numerous including administration of large molecules, avoiding first-pass metabolism, ease of administration, lack of pain, site-specific drug targeting, and dose reduction due to increased absorption efficacy. The growth in the transdermal market has been fueled by an increasing number of chronic disease patients and a demand for easy and pain-free drug administration.

AREAS COVERED

This paper highlights the use of MNs as a drug delivery system and discusses their potential market impact from a cost perspective. A number of clinical trials have been conducted and are listed to illustrate the potential applications of MNs for therapeutic use. Furthermore, the cosmetic market has made use of the MN technology, indicating that MNs can be used safely, efficaciously, and on a commercial scale. Furthermore, the cost-effectiveness of MNs is discussed.

EXPERT COMMENTARY

For MNs to become commercially available for therapeutic use, a number of factors will need to be considered: safety, ease of use, manufacturing and storage, uptake, effectiveness, and regulatory requirements.

Acceptability of microneedle-patch vaccines: A qualitative analysis of the opinions of parents

INTRODUCTION

Vaccines incorporated into microneedle-based patch platforms offer advantages over conventional hypodermic injections. However, the success and clinical utility of these platforms will depend on its acceptance among stakeholders. Minimal focus has been placed on determining parents' acceptability of microneedle-patch vaccines intended for paediatric use. This qualitative study probes the perceived acceptability of microneedle technology for paediatric vaccination in a parent population.

RESEARCH DESIGN AND METHODOLOGY

Focus groups (n=6) were convened through purposive sampling of Cork city primary schools. Discussions were audio-recorded, transcribed verbatim, anonymised, independently verified and analysed by thematic analysis, with constant comparison method applied throughout.

RESULTS

The opinions of 32 parents were included. All participants declared that their children were fully vaccinated. Five core themes were identified and defined as: (i) concern, (ii) suitability for paediatric use, (iii) potential for parental administration, (iv) the role of the healthcare professional and (v) special populations. Drivers for acceptance include; concerns with current vaccines and vaccination programmes; attributes of microneedle-patch (reduced pain, bleeding, fear and increased convenience) and endorsement by a healthcare professional. Barriers to acceptance include; lack of familiarity, concerns regarding feasibility and suitability in paediatrics, allergic potential, inability to confirm delivery and potential reduction in vaccine coverage.

CONCLUSION

This is the first study to explore parental acceptance of microneedle-patch vaccines. Capturing the opinions of parents, the ultimate decision makers in paediatric vaccination, is crucial in the understanding of the eventual uptake of microneedle technology and therefore adds to literature currently available. This study has revealed that even "vaccine-acceptors"; parents who agree with, or do not question vaccination, will question the safety and efficacy of this novel method. Participants in this study remained tentative. However, the study has also revealed that endorsement by healthcare professionals could reduce this tentativeness, thereby identifying the role of healthcare professionals in disseminating information and providing support to parents. An increased awareness of developments in microneedle technology is needed to permit informed decision-making by parents.

Design, fabrication and characterization of drug delivery systems based on lab-on-a-chip technology

Lab-on-a-chip technology is an emerging field evolving from the recent advances of micro- and nanotechnologies. The technology allows the integration of various components into a single microdevice. Microfluidics, the science and engineering of fluid flow in microscale, is the enabling underlying concept for lab-on-a-chip technology. The present paper reviews the design, fabrication and characterization of drug delivery systems based on this amazing technology. The systems are categorized and discussed according to the scales at which the drug is administered. Starting with the fundamentals on scaling laws of mass transfer and basic fabrication techniques, the paper reviews and discusses drug delivery devices for cellular, tissue and organism levels. At the cellular level, a concentration gradient generator integrated with a cell culture platform is the main drug delivery scheme of interest. At the tissue level, the synthesis of smart particles as drug carriers using lab-on-a-chip technology is the main focus of recent developments. At the organism level, microneedles and implantable devices with fluid-handling components are the main drug delivery systems. For drug delivery to a small organism that can fit into a microchip, devices similar to those of cellular level can be used.

Microneedle-assisted percutaneous delivery of naltrexone hydrochloride in yucatan minipig: in vitro-in vivo correlation

Although microneedle-assisted transdermal drug delivery has been the subject of multiple scientific investigations, very few attempts have been made to quantitatively relate in vitro and in vivo permeation. The case of naltrexone hydrochloride is not an exception. In the present study, a pharmacokinetic profile obtained following a "poke and patch" microneedle application method in the Yucatan minipig is reported. The profile demonstrates a rapid achievement of maximum naltrexone hydrochloride plasma concentration followed by a relatively abrupt concentration decline. No steady state was achieved in vivo. In an attempt to correlate the present in vivo findings with formerly published in vitro steady-state permeation data, a diffusion-compartmental mathematical model was developed. The model incorporates two parallel permeation pathways, barrier-thickness-dependent diffusional resistance, microchannel closure kinetics, and a pharmacokinetic module. The regression analysis of the pharmacokinetic data demonstrated good agreement with an independently calculated microchannel closure rate and in vitro permeation data. Interestingly, full-thickness rather than split-thickness skin employed in in vitro diffusion experiments provided the best correlation with the in vivo data. Data analysis carried out with the model presented herein provides new mechanistic insight and permits predictions with respect to pharmacokinetics coupled with altered microchannel closure rates.

Enhanced transdermal drug delivery of zaltoprofen using a novel formulation

Zaltoprofen is a non-steroidal anti-inflammatory drug (NSAID) belonging to the propionic acid class. It has strong inhibitory effects on acute and chronic inflammation. Although zaltoprofen is well tolerated orally compared to other NSAIDs, it has to be administered in three to four doses per day and was associated with ulcerogenicity, bellyache and indigestion. This makes administration of zaltoprofen unsuitable for patients with gastric ulcer and is also associated with drug interactions. Therefore, it is important to develop an alternative dosage form which is easier to administer and avoids first-pass metabolism. The transdermal route meets all the above advantages. In this study, zaltoprofen gels were prepared using carbomer with mixture solution of polyethylene glycol (PEG) 400, Tween 80 and (2-hydroxypropyl)-β-cyclodextrin (HPCD) (called as T2), subsequently oleic acid as a penetration enhancer was added. Zaltoprofen gel containing T2 and oleic acid could promote the percutaneous absorption of zaltoprofen and increase AUC by 183% compared to zaltoprofen gel without T2 and oleic acid. Also, there was a finding zaltoprofen gel containing T2 and oleic acid did not cause dermal irritations in an experimental animal.

Microneedles for drug and vaccine delivery

Microneedles were first conceptualized for drug delivery many decades ago, but only became the subject of significant research starting in the mid-1990's when microfabrication technology enabled their manufacture as (i) solid microneedles for skin pretreatment to increase skin permeability, (ii) microneedles coated with drug that dissolves off in the skin, (iii) polymer microneedles that encapsulate drug and fully dissolve in the skin and (iv) hollow microneedles for drug infusion into the skin. As shown in more than 350 papers now published in the field, microneedles have been used to deliver a broad range of different low molecular weight drugs, biotherapeutics and vaccines, including published human studies with a number of small-molecule and protein drugs and vaccines. Influenza vaccination using a hollow microneedle is in widespread clinical use and a number of solid microneedle products are sold for cosmetic purposes. In addition to applications in the skin, microneedles have also been adapted for delivery of bioactives into the eye and into cells. Successful application of microneedles depends on device function that facilitates microneedle insertion and possible infusion into skin, skin recovery after microneedle removal, and drug stability during manufacturing, storage and delivery, and on patient outcomes, including lack of pain, skin irritation and skin infection, in addition to drug efficacy and safety. Building off a strong technology base and multiple demonstrations of successful drug delivery, microneedles are poised to advance further into clinical practice to enable better pharmaceutical therapies, vaccination and other applications.

Microneedles: an emerging transdermal drug delivery system

OBJECTIVES

One of the thrust areas in drug delivery research is transdermal drug delivery systems (TDDS) due to their characteristic advantages over oral and parenteral drug delivery systems. Researchers have focused their attention on the use of microneedles to overcome the barrier of the stratum corneum. Microneedles deliver the drug into the epidermis without disruption of nerve endings. Recent advances in the development of microneedles are discussed in this review for the benefit of young scientists and to promote research in the area.

KEY FINDINGS

Microneedles are fabricated using a microelectromechanical system employing silicon, metals, polymers or polysaccharides. Solid coated microneedles can be used to pierce the superficial skin layer followed by delivery of the drug. Advances in microneedle research led to development of dissolvable/degradable and hollow microneedles to deliver drugs at a higher dose and to engineer drug release. Iontophoresis, sonophoresis and electrophoresis can be used to modify drug delivery when used in concern with hollow microneedles. Microneedles can be used to deliver macromolecules such as insulin, growth hormones, immunobiologicals, proteins and peptides. Microneedles containing 'cosmeceuticals' are currently available to treat acne, pigmentation, scars and wrinkles, as well as for skin tone improvement.

SUMMARY

Literature survey and patents filled revealed that microneedle-based drug delivery system can be explored as a potential tool for the delivery of a variety of macromolecules that are not effectively delivered by conventional transdermal techniques.

Microneedles in clinical practice--an exploratory study into the opinions of healthcare professionals and the public

PURPOSE

Microneedles are being developed to administer vaccines and therapeutics to and through skin. To date there has been no qualitative or quantitative research into public and health professionals' views on this new delivery technique.

METHODS

Focus groups (n=7) comprising public and healthcare professionals were convened to capture the perceived advantages for, and concerns with, microneedles. Discussions were audio-recorded and transcribed. Transcript analysis identified themes that were explored using a questionnaire identifying consensus or otherwise.

RESULTS

Participants identified many potential benefits of the microneedle delivery system, including reduced pain, tissue damage and risk of transmitting infections compared with conventional injections, as well as potential for self-administration (subject to safeguards such as an indicator to confirm dose delivery). Delayed onset, cost, accurate and reliable dosing and the potential for misuse were raised as concerns. A range of potential clinical applications was suggested. The public (100%) and professional (74%) participants were positive overall about microneedle technology.

CONCLUSIONS

This exploratory research study captured the views of the eventual end-users of microneedle technology. Microneedle researchers should now reflect on their research and development activities in the context of stakeholder engagement in order to facilitate the transfer of this new technology 'from bench to bedside.'