Identification of Newly IsolatedTalaromyces pinophilusand Statistical Optimization of β-Glucosidase Production Under Solid-State Fermentation

Haze Exposure Changes the Skin Fungal Community and Promotes the Growth of Talaromyces Strains

Haze pollution has been a public health issue. The skin microbiota, as a component of the first line of defense, is disturbed by environmental pollutants, which may have an impact on human health. A total of 74 skin samples from healthy students were collected during haze and nonhaze days in spring and winter. Significant differences of skin fungal community composition between haze and nonhaze days were observed in female and male samples in spring and male samples in winter based on unweighted UniFrac distance analysis. Phylogenetic diversity whole-tree indices and observed features were significantly increased during haze days in male samples in winter compared to nonhaze days, but no significant difference was observed in other groups. Dothideomycetes, Capnodiales, Mycosphaerellaceae, etc. were significantly enriched during nonhaze days, whereas Trichocomaceae, Talaromyces, and Pezizaceae were significantly enriched during haze days. Thus, five Talaromyces strains were isolated, and an in vitro culture experiment revealed that the growth of representative Talaromyces strains was increased at high concentrations of particulate matter, confirming the sequencing results. Furthermore, during haze days, the fungal community assembly was better fitted to a niche-based assembly model than during nonhaze days. Talaromyces enriched during haze days deviated from the neutral assembly process. Our findings provided a comprehensive characterization of the skin fungal community during haze and nonhaze days and elucidated novel insights into how haze exposure influences the skin fungal community. IMPORTANCE Skin fungi play an important role in human health. Particulate matter (PM), the main haze pollutant, has been a public environmental threat. However, few studies have assessed the effects of air pollutants on skin fungi. Here, haze exposure influenced the diversity and composition of the skin fungal community. In an in vitro experiment, a high concentration of PM promoted the growth of Talaromyces strains. The fungal community assembly is better fitted to a niche-based assembly model during haze days. We anticipate that this study may provide new insights on the role of haze exposure disturbing the skin fungal community. It lays the groundwork for further clarifying the association between the changes of the skin fungal community and adverse health outcomes. Our study is the first to report the changes in the skin fungal community during haze and nonhaze days, which expands the understanding of the relationship between haze and skin fungi.

New Hybrid Phenalenone Dimer, Highly Conjugated Dihydroxylated C28 Steroid and Azaphilone from the Culture Extract of a Marine Sponge-Associated Fungus, Talaromyces pinophilus KUFA 1767

An undescribed hybrid phenalenone dimer, talaropinophilone (3), an unreported azaphilone, 7-epi-pinazaphilone B (4), an unreported phthalide dimer, talaropinophilide (6), and an undescribed 9R,15S-dihydroxy-ergosta-4,6,8 (14)-tetraen-3-one (7) were isolated together with the previously reported bacillisporins A (1) and B (2), an azaphilone derivative, Sch 1385568 (5), 1-deoxyrubralactone (8), acetylquestinol (9), piniterpenoid D (10) and 3,5-dihydroxy-4-methylphthalaldehydic acid (11) from the ethyl acetate extract of the culture of a marine sponge-derived fungus, Talaromyces pinophilus KUFA 1767. The structures of the undescribed compounds were elucidated by 1D and 2D NMR as well as high-resolution mass spectral analyses. The absolute configuration of C-9' of 1 and 2 was revised to be 9'S using the coupling constant value between C-8' and C-9' and was confirmed by ROESY correlations in the case of 2. The absolute configurations of the stereogenic carbons in 7 and 8 were established by X-ray crystallographic analysis. Compounds 1,2, 4-8, 10 and 11 were tested for antibacterial activity against four reference strains, viz. two Gram-positive (Staphylococcus aureus ATCC 29213, Enterococcus faecalis ATCC 29212) and two Gram-negative (Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853), as well as three multidrug-resistant strains, viz. an extended-spectrum β-lactamase (ESBL)-producing E. coli, a methicillin-resistant S. aureus (MRSA) and a vancomycin-resistant E. faecalis (VRE). However, only 1 and 2 exhibited significant antibacterial activity against both S. aureus ATCC 29213 and MRSA. Moreover, 1 and 2 also significantly inhibited biofilm formation in S. aureus ATCC 29213 at both MIC and 2xMIC concentrations.

Statistical optimization for simultaneous removal of methyl red and production of fatty acid methyl esters using fresh alga Scenedesmus obliquus

Microalgae are a diverse group of microorganisms, the majority of which are photosynthetic in nature. Microalgae have different applications, the most important of which is the biological treatment of wastewater. Microalgae grow in various types of wastewater, such as wastewater polluted by Azo dyes, due to microalgae using wastewater as a culture medium, which contains many nutrients like nitrogen, phosphate, and carbon sources. Microalgae grow in various types of wastewater, such as wastewater polluted by Azo dyes, due to microalgae using wastewater as a culture medium, which contains many nutrients like nitrogen, phosphate, and carbon sources. So, microalgae are used for bioremediation of wastewater due to the efficiency of growing in wastewater and for the high production of lipids followed by trans-esterification to biodiesel. Face-centered central composite design (FCCCD) was used to determine the factors that have the most significant impact on the simultaneous decolorization of methyl red and lipid production by the fresh green alga Scenedesmus obliquus. The predicted results indicated that the alga decolorized 70.15% methyl red and produced 20.91% lipids by using 1 g/L nitrogen, an incubation time of 10 days, a pH of 8, and the concentration of methyl red is 17.65 mg/L. The dry biomasses of S. obliquus were also examined by SEM and FTIR before and after treatment with methyl red. SEM and FTIR showed that the properties of dry S. obliquus were altered after the biosorption of methyl red. According to GC-MS analysis of hexane extracts of S. obliquus, the lipid profile differed before and after methyl red decolorization. The results proved that it is possible to use S. obliquus to remove dyes and produce renewable fuels such as biodiesel. The novelty of this study is that this is the first time in which the effect of nitrogen concentrations in the medium used for algal growth on the removal of dye has been studied.

Eco-friendly approach for biosorption of Pb2+ and carcinogenic Congo red dye from binary solution onto sustainable Ulva lactuca biomass

Dyes constitute an important group of organic contaminants and are recognized for its harmful effects on the aquatic environments and humans. Heavy metals are also the largest group of inorganic pollutants due to their accumulation in the environment, contaminate food chains and cause adverse effects on the living organisms. Biosorption capacity of Ulva lactuca biomass was assessed in batch experiments for simultaneous removal of Pb2+ and Congo red dye from binary solution. The process variables effects on Congo red dye and Pb2+ removal percentages were explored by performing 50 experiments using Face-centered central composite design. The highest removal percentages of Congo red dye (97.89%) and Pb2+ (98.78%) were achieved in the run no. 24, using 100 mg/L Congo red dye, 200 mg/L Pb2+, 3 g/L algal biomass, initial pH 6 and contact time was 120 min at 30 °C. FTIR analysis of the algal biomass showed the existence of many functional groups responsible for the biosorption process. After the biosorption process, SEM analysis revealed obvious morphological changes including surface shrinkage and the presence of new glossy Pb2+ particles, and the EDS spectra reveals presence of additional Pb2+ peak confirming the capacity of Ulva lactuca biomass to remove Pb2+ from binary solution.

Chemistry and Bioactivities of Secondary Metabolites from the Genus Talaromyces

Fungi have especially captured the interest and fascination of natural product chemists in that they produce a dizzying array of natural organic molecules with many unique functional groups and atom arrangements. In this review, we focus on the genus Talaromyces (Trichocomaceae) which has been a hot spot of natural product studies over the last three decades. This review summarized the discovery, structures, and bioactivities of various classes of 151 compounds isolated from both terrestrial and marine derived fungal strains of the genus Talaromyces reported from 1994 to 2019.

High cellulolytic activities in filamentous fungi isolated from an extreme oligotrophic subterranean environment (Catão cave) in Brazil

Isolation and screening of new fungal strains from extreme and understudied environments, such as caves, is a promising approach to find higher yields enzyme producers. Cellulolytic fungal strains isolated from a Brazilian cave were evaluated for their enzymatic production after submerged (SmF) and solid-state fermentation (SSF). After SmF, three strains were selected for their high enzymatic activities: Aspergillus ustus for endoglucanase (4.76 U/mg), Talaromyces bruneus for β-glucosidase (11.71 U/mg) and Aspergillus sp. (CBMAI 1926) for total cellulase (1.70 U/mg). After SSF, these strains, showed better yields compared to the reference strain Aspergillus niger 3T5B8. Aspergillus sp. (CBMAI 1926) stood out as a new species that expressed activity of total cellulases (0.10 U/mg) and low protein concentration (0.44 mg/mL). In conclusion, these isolated strains have a more efficient and promising cellulolytic enzyme complex that can be used in fermentation and saccharification processes with a lower protein concentration and a higher enzymatic activity than the reference strain. Therefore, beside the new genetic material characterized, our study highlights the benefits of cave extreme environments exploitation to find new potentially valuable strains.

Enhanced biosynthesis of dextransucrase: A multivariate approach to produce a glucosyltransferase for biocatalysis of sucrose into dextran

The current study reported the statistically designed experimental method to enhance the biocatalytic efficacy of dextransucrase from Weissella confusa. Various environmental and nutritional parameters were optimized using multiple responses under submerged fermentation environment. Statistical models were constructed to screen the influence of nine factors on the biocatalysis of dextransucrase. Among them, fermentation time, pH, sucrose and peptone exhibited significant probability (P < 0.05) and are considered as substantial constituents in accordance with Plackett-Burman design. Central composite design was further implemented to optimize the levels of selected variables for maximum enzyme yield. The predicted optimum conditions were pH of 7.5 under fermentation time of 8 h with 30.0 g l^-1 sucrose and 1.0 g l^-1 peptone. The overall enzyme yield increased from 11.4 DSU ml^-1 to 52.75 DSU ml^-1 with 4.62-fold upsurge after the implementation of the statistical models. Furthermore, SEM analysis showed the biocatalytic conversion of sucrose into highly porous dextran when utilizing dextransucrase. The biopolymer produced under the current optimized model could be utilized as an emulsifying, gelling, stabilizing and thickening agent in food industry.

Genome sequencing and analysis of Talaromyces pinophilus provide insights into biotechnological applications

Species from the genus Talaromyces produce useful biomass-degrading enzymes and secondary metabolites. However, these enzymes and secondary metabolites are still poorly understood and have not been explored in depth because of a lack of comprehensive genetic information. Here, we report a 36.51-megabase genome assembly of Talaromyces pinophilus strain 1-95, with coverage of nine scaffolds of eight chromosomes with telomeric repeats at their ends and circular mitochondrial DNA. In total, 13,472 protein-coding genes were predicted. Of these, 803 were annotated to encode enzymes that act on carbohydrates, including 39 cellulose-degrading and 24 starch-degrading enzymes. In addition, 68 secondary metabolism gene clusters were identified, mainly including T1 polyketide synthase genes and nonribosomal peptide synthase genes. Comparative genomic analyses revealed that T. pinophilus 1-95 harbors more biomass-degrading enzymes and secondary metabolites than other related filamentous fungi. The prediction of the T. pinophilus 1-95 secretome indicated that approximately 50% of the biomass-degrading enzymes are secreted into the extracellular environment. These results expanded our genetic knowledge of the biomass-degrading enzyme system of T. pinophilus and its biosynthesis of secondary metabolites, facilitating the cultivation of T. pinophilus for high production of useful products.

The Bioactive Secondary Metabolites from Talaromyces species

The focus of this review is placed on the chemical structures from the species of the genus Talaromyces reported with reference to their biological activities. 221 secondary metabolites, including 43 alkaloids and peptides, 88 esters, 31 polyketides, 19 quinones, 15 steroid and terpenoids, and 25 other structure type compounds, have been included, and 66 references are cited.

Talaromycolides A-C, Novel Phenyl-Substituted Phthalides Isolated from the Green Chinese Onion-Derived Fungus Talaromyces pinophilus AF-02

The green Chinese onion (Allium fistulosum L.), which is widely cultivated and has been naturalized in many places, is an important spice and vegetable in East and Southeast Asia. It is used to treat the common cold in China. In the ongoing search for antibacterial activity in fungi derived from natural, pungently scented vegetables, the secondary metabolites of Talaromyces pinophilus AF-02, which was isolated from the stem of the green Chinese onion, were investigated. The genus Talaromyces (Trichocomaceae) is an important fungal genus because of its ubiquity and the role of many of its species in food and agriculture production. Three new phthalide derivatives, talaromycolides A-C, 1-3; a new long-chain dicarboxylic acid, 11; and 12 known compounds were isolated from methanolic extracts of this fungus. Their structures were determined via extensive NMR, HR-ESI-MS, and CD spectroscopic analyses. Compounds 1-3 are rare phthalide derivatives with a novel linkage position between the phenyl and phthalide moieties. The biological properties of 1-16 were evaluated using six different bacteria, and 1-3, 5, and 11 exhibited significant antibacterial activity in response to some of the tested strains.