Characterization of marine bacterial carbonic anhydrase and their CO2 sequestration abilities based on a soil microcosm

A study of bacteria producing carbonic anhydrase enzyme for CaCO3 precipitation and soil biocementation

We study the carbonic anhydrase (CA) pathway using autochthonous CA-producing bacteria as a means of inducing calcite precipitation, which acts as a biocement to improve the engineering soil properties. Forty different microbial strains producing CA were isolated from the foundation soil of a railway embankment in Prickwillow, UK. Three of the best CA-producing strains were selected and identified by DNA sequencing as Bacillus licheniformis, Bacillus toyonensis and Bacillus pumilus with CA activity values respectively of 1.79 U/ml, 1.42 U/ml and 1.55 U/ml. To optimise the treatments, we investigated the effect of pH, temperature, zinc co-factor and cementation solution molarity on the growth and CA activity and bioprecipitates, with CO2 added in the form of bicarbonate. Scanning electron microscope (SEM) analysis of the bioprecipitates showed that these had characteristic morphologies of calcite and vaterite crystals. The formation of calcite was further corroborated by FT-IR and Raman analysis of bioprecipitates. The precultured bacteria were injected into the fine-grained soil together with cementation solution. Unconfined compressive strength in treated soil increased up to 1 MPa, and its calcium carbonate content increased by 2.78%. This, as well as the stability of the treated soil upon water immersion, proved the biocementation of the fine-grained soil. These findings suggest the potential of employing the CA biocementation route for soil stabilisation pending further development of the technique.

An electrokinetic-biocementation study for clay stabilisation using carbonic anhydrase-producing bacteria

This study investigates the feasibility of biocementing clay soil underneath a railway embankment of the UK rail network via carbonic anhydrase (CA) biocementation, implementing the treatments electrokinetically. Compared to previous biocementation studies using the ureolytic route, the CA pathway is attractive as CA-producing bacteria can sequester CO2 to produce biocement. Clay soil samples were treated electrokinetically using biostimulation and bioaugmentation conditions to induce biocementation. The effects of the treatment were assessed in terms of undrained shear strength using the cone penetration test, moisture content, and calcium carbonate content measurements. Scanning electron microscopy (SEM) analyses were also conducted on soil samples before and after treatment to evaluate the reaction products. The results showed that upon biostimulation, the undrained shear strength of the soil increased uniformly throughout the soil, from 17.6 kPa (in the natural untreated state) to 106.6 kPa. SEM micrographs also showed a clear change in the soil structure upon biostimulation. Unlike biostimulation, bioaugmentation did not have the same performance, although a high amount of CaCO3 precipitates was detected, and bacteria were observed to have entered the soil. The prospects are exciting, as it was shown that it is possible to achieve a considerable strength increase by the biostimulation of native bacteria capturing CO2 while improving the soil strength, thus having the potential to contribute both to the resilience of existing railway infrastructure and to climate change mitigation.

Enzyme mediated transformation of CO2 into calcium carbonate using purified microbial carbonic anhydrase

In this study, a bacterial carbonic anhydrase (CA) was purified from Corynebacterium flavescens for the CO₂ conversion into CaCO₃. The synthesized CaCO₃ can be utilized in the papermaking industry as filler material, construction material and in steel industry. Herein, the CA was purified by using a Sephadex G-100 column chromatography having 29.00 kDa molecular mass in SDS-PAGE analysis. The purified CA showed an optimal temperature of 35 °C and pH 7.5. In addition, a kinetic study of CA using p-NPA as substrate showed V_max (166.66 μmoL/mL/min), K_m (5.12 mM), and K_cat (80.56 sec^-1) using Lineweaver Burk plot. The major inhibitors of CA activity were Na²⁺, K⁺, Mn²⁺, and Al³⁺, whereas Zn²⁺ and Fe²⁺ slightly enhanced it. The purified CA showed a good efficacy to convert the CO₂ into CaCO₃ with a total conversion rate of 65.05 mg CaCO₃/mg of protein. In silico analysis suggested that the purified CA has conserved Zn²⁺ coordinating residues such as His 111, His 113, and His 130 in the active site center. Further analysis of the CO₂ binding site showed conserved residues such as Val 132, Val 142, Leu 196, Thr 197, and Val 205. However, a substitution has been observed where Trp 208 of its closest structural homolog T. ammonificans CA is replaced with Arg 207 of C. flavescens. The presence of a hydrophilic mutation in the CO₂ binding hydrophobic region is a further subject of investigation.

Emerging trends in environmental and industrial applications of marine carbonic anhydrase: a review

Biocatalytic conversion of greenhouse gases such as carbon dioxide into commercial products is one of the promising key approaches to solve the problem of climate change. Microbial enzymes, including carbonic anhydrase, NAD-dependent formate dehydrogenase, ribulose bisphosphate carboxylase, and methane monooxygenase, have been exploited to convert atmospheric gases into industrial products. Carbonic anhydrases are Zn²⁺-dependent metalloenzymes that catalyze the reversible conversion of CO₂ into bicarbonate. They are widespread in bacteria, algae, plants, and higher organisms. In higher organisms, they regulate the physiological pH and contribute to CO₂ transport in the blood. In plants, algae, and photosynthetic bacteria carbonic anhydrases are involved in photosynthesis. Converting CO₂ into bicarbonate by carbonic anhydrases can solidify gaseous CO2, thereby reducing global warming due to the burning of fossil fuels. This review discusses the three-dimensional structures of carbonic anhydrases, their physiological role in marine life, their catalytic mechanism, the types of inhibitors, and their medicine and industry applications.

Enzymatic characteristics of immobilized carbonic anhydrase and its applications in CO2 conversion

Native carbonic anhydrase (CA) has been widely used in several different applications due to its catalytic function in the interconversion of carbon dioxide (CO₂) and carbonic acid. However, subject to its stability and recyclability, native CA often deactivates when in harsh environments, which restricts its applications in the commercial market. Maintaining the stability and high catalytic activity of CA is challenging. Immobilization provides an effective route that can improve enzymatic stability. Through the interaction of covalent bonds and van der Waals forces, water-soluble CA can be combined with various insoluble supports to form water-insoluble immobilized CA so that CA stability and utilization can be greatly improved. However, if the immobilization method or immobilization condition is not suitable, it often leads to a decrease in CA activity, reducing the application effects on CO₂ conversion. In this review, we discuss existing immobilization methods and applications of immobilized CA in the environmental field, such as the mineralization of carbon dioxide and multienzyme cascade catalysis based on CA. Additionally, prospects in current development are outlined. Because of the many outstanding and superior properties after immobilization, CA is likely to be used in a wide variety of scientific and technical areas in the future.