SAMPLE PREPARATION FOR TRACE ANALYSIS BY CHROMATOGRAPHIC METHODS

Near-infrared light responsive dendrimers facilitate the extraction of bicalutamide from human plasma and urine

BACKGROUND

Today, it is well accepted that the quantitative measurement of anti-cancer drugs in human biological samples requires the development and validation of efficient bioanalytical methods. This study attempts to provide a high-capacity and thermo-sensitive nano-adsorbent for bicalutamide extraction from human biological fluids.

MAIN METHODS AND MAJOR RESULTS

In this study, five generations of thermo-sensitive dendrimers were synthesized onto the surface of WS₂ nano-sheets. After drug-loading process from body fluids, the near-infrared (NIR) light (at 808 nm) was applied and light-to-heat conversion by the WS₂ nano-sheets led to shrinkage in polymer chains, resulting the release of the entrapped drug. Finally, the extracted drug was analyzed via HPLC-UV system (at 270 nm). The final nano-adsorbent was described via FE-SEM, XRD, FT-IR, and TGA techniques. The adsorption isotherm data were well fitted by Langmuier isotherm model (R²  = 0.9978). The mean recoveries for spiking bicalutamide at three different concentrations in plasma and urine samples were 92.12% and 94.54% under the NIR light irradiation.

CONCLUSIONS AND IMPLICATIONS

We have developed a smart strategy to analyze bicalutamide in biological samples using near-infrared light irradiation in a controlled manner. All the results indicate the promising application of the proposed method for the extraction and determination of bicalutamide.

Opportunities for green microextractions in comprehensive two-dimensional gas chromatography / mass spectrometry-based metabolomics - A review

Microextractions have become an attractive class of techniques for metabolomics. The most popular technique is solid-phase microextraction that revolutionized the field of modern sample preparation in the early nineties. Ever since this milestone, microextractions have taken on many principles and formats comprising droplets, fibers, membranes, needles, and blades. Sampling devices may be customized to impart exhaustive or equilibrium-based characteristics to the extraction method. Equilibrium-based approaches may rely on additional methods for calibration, such as diffusion-based or on-fiber kinetic calibration to improve bioanalysis. In addition, microextraction-based methods may enable minimally invasive sampling protocols and measure the average free concentration of analytes in heterogeneous multiphasic biological systems. On-fiber derivatization has evidenced new opportunities for targeted and untargeted analysis in metabolomics. All these advantages have highlighted the potential of microextraction techniques for in vivo and on-site sampling and sample preparation, while many opportunities are still available for laboratory protocols. In this review, we outline and discuss some of the most recent applications using microextractions techniques for comprehensive two-dimensional gas chromatography-based metabolomics, including potential research opportunities.

Ionic liquid-based headspace in-tube liquid-phase microextraction coupled with capillary electrophoresis for sensitive detection of phenols

An ionic liquid-based headspace in-tube liquid-phase microextraction (IL-HS-ITLPME) in-line coupled with capillary electrophoresis (CE) is proposed. The method is capable of quantifying trace amounts of phenols in environmental water samples. In the newly developed method, simply by placing a capillary injected with IL in the HS above the aqueous sample, volatile phenols were extracted into the IL acceptor phase in the capillary. After extraction, electrophoresis of the phenols in the capillary was carried out. Extraction parameters such as the extraction time, extraction temperature, ionic strength, volume of the sample solution and IL types were systematically investigated. Under the optimized conditions, enrichment factors for four phenols were from 1510 to 1985. The proposed method provided a good linearity, low limits of detection (below 5.0 ng mL-1 ), and good repeatability of the extractions (RSDs below 6.7%, n = 6). This method was then utilized to analyze two real environmental samples of Xiaoxi Lake and tap water, obtaining acceptable recoveries and precisions. Compared with the usual HS-ITLPME for CE, IL-HS-ITLPME-CE is a simple, low-cost, fast and environmentally friendly pre-concentration technique. This article is protected by copyright. All rights reserved.

Analytical tools employed to determine pharmaceutical compounds in wastewaters after application of advanced oxidation processes

Today, the presence of contaminants in the environment is a topic of interest for society in general and for the scientific community in particular. A very large amount of different chemical substances reaches the environment after passing through wastewater treatment plants without being eliminated. This is due to the inefficiency of conventional removal processes and the lack of government regulations. The list of compounds entering treatment plants is gradually becoming longer and more varied because most of these compounds come from pharmaceuticals, hormones or personal care products, which are increasingly used by modern society. As a result of this increase in compound variety, to address these emerging pollutants, the development of new and more efficient removal technologies is needed. Different advanced oxidation processes (AOPs), especially photochemical AOPs, have been proposed as supplements to traditional treatments for the elimination of pollutants, showing significant advantages over the use of conventional methods alone. This work aims to review the analytical methodologies employed for the analysis of pharmaceutical compounds from wastewater in studies in which advanced oxidation processes are applied. Due to the low concentrations of these substances in wastewater, mass spectrometry detectors are usually chosen to meet the low detection limits and identification power required. Specifically, time-of-flight detectors are required to analyse the by-products.

Stir bar sorptive extraction applied to the analysis of biological fluids

Stir bar sorptive extraction (SBSE) is a sample preparation technique, which is used for the extraction as well as the preconcentration of organic substances from various aqueous matrices, prior to the determination of the analytes with a separation technique, such as LC or GC, coupled to different detectors. Since 1999, when SBSE was first developed by Sandra and co-workers, SBSE has been used in the analysis of samples of environmental, food, pharmaceutical and biomedical origin. In this article, we focus on the application of SBSE in biological fluids.

Novel sorption-based methodologies for static microextraction analysis: A review on SBSE and related techniques

Stir bar sorptive extraction (SBSE) became a well-established analytical technique in the last years, for which hundreds of applications in almost all types of scientific fields can be found in the literature. In spite of the great enrichment capacity and outstanding performance to operate at the ultra-trace level, this remarkable static sorption-based method is already not quite effective for some complex systems, in particular to monitor the large group of polar organic compounds. This review aims to cover the state-of-the-art in SBSE, as well as supplying a discussion of the analytical potential of the novel adsorptive microextraction techniques, as complementary enrichment approaches, by explaining the main principles and providing technical know-how for the beginners.