SURFACE MODIFICATION OF SILICA-BASED MONOLITH WITH POLY(PENTAFLUOROPROPYL METHACRYLATE) USING SINGLE STEP PHOTOGRAFTING

Photografting as a versatile, localizable, and single-step surface functionalization of silica-based monoliths dedicated to microscale separation techniques

In this work, we developed a surface functionalization way of silica monoliths with a rapid, simple, versatile, and localizable photografting step. The elaboration of a photoreactive layer at the surface of monoliths was first optimized. The functionalization with [γ-(methacryloyloxy)propyl]trimethoxysilane at 80°C in a hydro-organic solution containing triethylamine as catalyst allows reachng the highest density of methacrylate photoactive moieties on silica surfaces. These methacrylate reactive surfaces were subsequently photografted within few minutes with acrylate monomers bearing alkyl chains (C12 and C18). The photografting efficiency was determined by monitoring the retentive properties of monoliths in the RP mode. The retention factors are of the same order of magnitude as highly retentive columns obtained by modification of silica surface with long-alkyl chain silanes or by thermal polymerization of long-alkyl chain monomers. It was also verified that such grafting neither impaired the efficiency of the monolithic stationary phase (Hmin = 6-8 μm in nano-LC) nor its permeability (about 6 × 10(-14) m(2)). Further, it was also demonstrated that photografting is localizable in nonmasked defined areas. Results obtained in anion-exchange chromatography after photopolymerization of [2-(methacryloyloxy)ethyl]trimethylammonium chloride are presented as well to demonstrate the versatility of the developed approach.

In situ sol-gel preparation of porous alumina monoliths for chromatographic separations of adenosine phosphates

A method enabling the in situ preparation of porous alumina monoliths within 100 μm i.d. fused silica capillaries has been developed. These monoliths were prepared using the sol-gel process from a mixture consisting of an inorganic aluminum salt, a porogen, an epoxide, and a solvent. We investigated the effects of varying the preparation conditions on the physical characteristics of the monoliths with respect to their potential application in chromatographic separations. The best columns were obtained from a mixture of aluminum chloride hexahydrate, N,N-dimethylformamide, water, ethanol and propylene oxide. Adenosine phosphates were then separated in the optimized column with retention increasing according to number of phosphate functionalities.