HYDROPHILIC INTERACTION CHROMATOGRAPHIC DETERMINATION OF OXYTETRACYCLINE IN THE ENVIRONMENTAL WATER USING SILICA COLUMN

Synergistic effect of Cu-nanoparticles and β-cyclodextrin functionalized reduced graphene oxide nanocomposite on the adsorptive remediation of tetracycline antibiotics

Pollution by tetracyclines antibiotics has a great potential risk on human and animal health even at trace levels. Copper nanoparticles immobilized-β-cyclodextrin functionalized reduced graphene oxide (Cu/β-CD/rGO) were successfully prepared as an efficient extractor of tetracycline (TC), oxytetracycline (OTC) and doxycycline (DC) antibiotics from different environmental water samples. Tetracyclines (TCs) are strongly deposited in the matrix of Cu/β-CD/rGO nanocomposite via surface complexation with the Cu-nanoparticles besides the formation of inclusion complexes with β-cyclodextrin and π-π interaction of reduced graphene oxide. The novel nanocomposite was characterized by HRSEM, TEM, TGA, FT-IR, XPS, and XRD. The optimization of variables such as the pH, contact time, ionic strength and TC concentration were successfully analyzed. The maximum adsorption capacity (q_m) of Cu/β-CD/rGO calculated from the Langmuir isotherm was 403.2 mg.g^-1 for TC, 476.2 mg.g^-1 for OTC and 434.8 mg.g^-1 for DC at 298 K. The removal efficiency was decreased by 3.7% after five adsorption-desorption cycles. The Cu/β-CD/rGO nanocomposite was applied for removing TCs from tap water and the Nile River water samples. The novel nanocomposite demonstrated fast and highly efficient removing performance for different TCs with low levels and large sample volume.

Copper carboxymethyl cellulose nanoparticles for efficient removal of tetracycline antibiotics in water

Copper carboxymethyl cellulose nanoparticles were prepared and characterized by FT-IR, XRD, SEM, TEM, and EDX techniques. Removal of tetracycline was obtained at 90% with optimized parameters of 500 μg/L concentration, 40 min contact time, 7.5 pH, 1.5 g/L dose, and 298 K temp. The adsorption followed Freundlich model very well in comparison to Langmuir. Tempkin model described good interactions between tetracycline and nanoparticles. Dubinin-Radushkevich isotherm confirmed the chemical nature of adsorption. The adsorption was pseudo-second order with a liquid film diffusion kinetics mechanism. The adsorption was endothermic and spontaneous as suggested by thermodynamics results. The supramolecular mechanism was developed for the process. Interestingly, the process was suitable at 7.5 pH with low contact time. These features of the adsorption made this process applicable at natural water conditions, making the process eco-friendly and feasible. Therefore, it may be an excellent method for the removal of tetracycline in any water system.

A substrate-free graphene oxide-based micromotor for rapid adsorption of antibiotics

Self-propelled micro/nanomotors play a crucial role in the fields of biomedicine, energy and the environment but are limited by low throughput and a tedious fabrication approach. Here, we propose a simple microfluidics-based scheme for fabricating substrate-free graphene oxide (GO)-based micromotors of different shapes and sizes with high throughput. The micromotors are designed to possess a 'Janus'-like porous structure, and half of each micromotor is modified with hierarchical Pt nanoflowers, which can promote the wetting of Pt with an H2O2 solution and result in a high speed of movement. To investigate the applicability of the micromotors, they were employed to rapidly remove an antibiotic, namely, tetracycline, from a solution. It was found that the rapid movement of the micromotors increased the mass transfer of tetracycline and the frequency of collisions between tetracycline molecules and the micromotors, which led to a high removal efficiency. The direction of movement of the micromotors can be conveniently controlled by an external magnetic field. Furthermore, the removal efficiency and removal time as functions of the number of micromotors, the adsorption kinetics and adsorption isotherm, and the removal amount as a function of the pH were investigated. This proved that the micromotors that were constructed exhibit high adsorption capabilities for tetracycline and implied that they hold great promise for the removal of antibiotics with similar structures or other pollutants, including organic compounds, heavy metals and oil droplets.

Validated univariate and multivariate spectrophotometric methods for the determination of pharmaceuticals mixture in complex wastewater

Five, accurate, precise, and sensitive univariate and multivariate spectrophotometric methods were developed for the simultaneous determination of a ternary mixture containing Trimethoprim (TMP), Sulphamethoxazole (SMZ) and Oxytetracycline (OTC) in waste water samples collected from different cites either production wastewater or livestock wastewater after their solid phase extraction using OASIS HLB cartridges. In univariate methods OTC was determined at its λmax 355.7 nm (0D), while (TMP) and (SMZ) were determined by three different univariate methods. Method (A) is based on successive spectrophotometric resolution technique (SSRT). The technique starts with the ratio subtraction method followed by ratio difference method for determination of TMP and SMZ. Method (B) is successive derivative ratio technique (SDR). Method (C) is mean centering of the ratio spectra (MCR). The developed multivariate methods are principle component regression (PCR) and partial least squares (PLS). The specificity of the developed methods is investigated by analyzing laboratory prepared mixtures containing different ratios of the three drugs. The obtained results are statistically compared with those obtained by the official methods, showing no significant difference with respect to accuracy and precision at p=0.05.

Removal of tetracycline from wastewater using pumice stone: equilibrium, kinetic and thermodynamic studies

In this study, pumice stone was used for the removal of tetracyline (TC) from aqueous solutions. It was characterized by XRD, FT-IR, SEM and BET analyses. Cation exchange capacity of pumice stone was found to be 9.9 meq/100 g. Effect of various parameters such as solution pH (2-11), adsorbent dosage (0.5-10 g/L), contact time (2.5-120 min), initial TC concentration (5-300 mg/L) and temperature (20-50°C) on TC adsorption onto pumice was investigated. Also the adsorption of TC on pumice stone was studied as a function of Na(+) and Cu(2+) cations changing pH from 2 to 11 using batch experiments. The best removal efficiency performance was exhibited at adsorbent dosage 10 g/L, pH 3, contact time 120 min. Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherm models were applied to the equilibrium data. The result has shown that the adsorption was favorable, physicochemical in nature and agrees well with Langmuir and Freundlich models. The maximum Langmuir adsorption capacity was found to be 20.02 mg/g. The adsorption behavior of TC on pumices stone was fitted well in the pseudo-second order kinetics model. Thermodynamic parameters calculated from the adsorption data at different temperature showed that the adsorption reaction was feasible, spontaneous and exothermic.