Application of an Electroosmotic Flow Gradient in Capillary Zone Electrophoresis Separations

Plastic substrates based separation channels in electromigration techniques

Three types of plastic materials (polyester, polyurethane and polymethylmethacrylate) were tested as materials for manufacturing separation columns (polyester and polyurethane capillaries were used) or separation channels (polymethylmethacrylate) in the chip format. A set of 11 fluorescein isothiocyanate amino acid derivatives was used as the test mixture. Using alpha-cyclodextrin additive to the background electrolyte in the case of the chip separation was also tested. The main problem with all plastic separation media was the selectivity of the separation. The best results, practically identical with bare fused silica capillary, were obtained with the polymethylmethacrylate chip, provided that alpha-cyclodextrin in a concentration 40 mmol/l was added to the background electrolyte. An important observation was that in SDS containing background electrolyte all the plastic materials used exhibited a distinct electroosmotic flow, which was ascribe to the sorption of the negatively charged constituents of the background electrolyte to the capillary wall. Regarding the order in which the individual components of the test mixture were brought to the detector only a single change was observed. Histidine migrated in the polystyrene and polymethylmethacrylate separation channels more slowly than in the bare silica or polyurethane based capillaries.

Applications of a sulfonated-polymer wall-modified open-tubular fused-silica capillary in capillary zone electrophoretic separations

A fused-silica capillary that is wall-modified via chemically bonding a sulfonated polymer to the capillary wall has a uniform negative charge density on its surface and produces an electroosmotic flow (EOF) greater than 4 x 10(-4) cm2 V(-1) s(-1) The EOF is nearly independent of buffer pH over the pH range of 2 to 10 and is lower than the EOF obtained for the bare fused-silica capillary at the more basic pH but is higher at the more acidic buffer pH. Optimization of buffer pH can be based on analyte pKa values to improve the overall quality of the capillary zone electrophoresis (CZE) separation of complex mixtures of weak acid and base analytes. Because of the high EOF in an acidic buffer, the capillary is useful for the separation of weak organic bases which are in their cation forms in the acidic buffer. EOF for the sulfonic acid bonded phase capillary can be adjusted via buffer additives such as organic solvent, tetraalkylammonium salts, multivalent cations and alkylsulfonic acids. The advantages of utilizing buffer pH and the EOF buffer modifiers to enhance migration time, selectivity, and resolution in CZE separations with this capillary are illustrated using a series of test analyte mixtures of inorganic anions, carboxylic acids, alkylsulfonic acids, benzenesulfonic acids, sulfas, pyridines, anilines or small-chain peptides.

Recent advancements in amino acid analysis using capillary electrophoresis

Recent advances in the analysis of amino acids using capillary electrophoresis are addressed. This area of research continues to receive increased attention as is evident from the 62 references reviewed. This review discusses current detection strategies including UV absorbance, laser-induced fluorescence, electrochemical, and others. Separation methodologies for both derivatized and underivatized amino acids are reviewed. Both direct and indirect enantiomeric resolution of amino acids are addressed. Applications utilizing capillary electrophoresis for the analysis of amino acids are discussed. This review covers literature published in 1997 and 1998.