Preparation and in vitro evaluation of melatonin-loaded HA/PVA gel formulations

Evaluation of Melatonin and its Nanostructures Effects on Skin Disorders Focused on Wound Healing

Skin is the largest organ of the human body functioning as a great primitive defensive barrier against different harmful environmental factors. However, it is damaged through varying injuries such as different wounds, burns, and skin cancers that cause disruption in internal organs and essential mechanisms of the body through inflammation, oxidation, coagulation problems, infection, etc. Melatonin is the major hormone of the pineal gland that is also effective in skin disorders due to strong antioxidant and anti-inflammatory features with additional desirable antiapoptotic, anti-cancer, and antibiotic properties. However, melatonin characteristics require improvements due to its limited water solubility, halflife and stability. The application of nanocarrier systems can improve its solubility, permeability, and efficiency, as well as inhibit its degradation and promote photostability. Our main purpose in the current review is to explore the possible role of melatonin and melatonin-containing nanocarriers in skin disorders focused on wounds. Additionally, melatonin's effect in regenerative medicine and its structures as a wound dressing in skin damage has been considered.

Use of Melatonin/Decorticotomy and Autogenous Bone Graft in Induced 1-Wall Defect

PURPOSE

This study was designed to investigate the effect of intramarrow penetration (IMP) and 1% melatonin (MLN) gel on the remodelling process of autogenous bone graft (ABG) in an induced 1-osseous wall defect model.

METHODS

Sixty-four intrabony induced mandibular defects were created on the distal side of premolars-P1, P2, P3, and P4 (on each side)-in 8 beagle dogs. A ligature-induced periodontitis was initiated in each defect. Defects were then divided into 4 equal groups. Group I was treated with open-flap debridement (OFD) alone, group II was treated with OFD/ABG, group III was treated with OFD/IMP/ABG, and group IV was treated with OFD/ABG/IMP/1% MLN gel. The study parameters were bone fill, histologic analysis, and immunohistochemical evaluation of endothelial nitric oxide synthase (eNOS) expression at 2-week (2W) and 8-week (8W) time intervals.

RESULTS

At 8W, significant differences were revealed amongst all groups regarding the amount of bone fill and eNOS expressions (P < .001). Bone fill percentages were 55.5%, 22.3%, 16.8%, and 0% in groups IV, III, II, and I, respectively. eNOS expressions were 1.68 ± 0.06, 8.43 ± 0.04, 16.80 ± 0.17, and 1.97 ± 0.07 in groups IV, III, II, and I, respectively. The favourable results were in line with group IV.

CONCLUSIONS

According to these preliminary results, defects treated by ABG augmented with IMP and 1% MLN gel revealed a greater amount of bone fill and reduced eNOS expression. This combination is therefore highly suggested as an adjunct to ABG.

Log P Determines Licorice Flavonoids Release Behaviors and Classification from CARBOMER Cross-Linked Hydrogel

The dynamic drug release mechanisms from Carbomer 940 (CP) hydrogels have not been systematically explored elsewhere. This study aimed to investigate the quantitative structure−activity relationship of licorice flavonoids (LFs) compounds on their drug release from CP hydrogels based on LFs-CP interactions and drug solubility in the release medium. Ten LFs-CP hydrogels were formulated, and their in vitro release study was conducted. The intermolecular forces of LFs-CP systems were characterized by FTIR, molecular docking and molecular dynamic simulation. Ten LFs compounds were classified into I (high-release capability) LFs and II (low-release capability) LFs according to the different negative correlations between drug release percent at 48 h and intermolecular forces of drugs-CP, respectively. Moreover, high-release LFs possessed significantly lower log P and higher drug solubility in the release medium than low-release LFs. All I LFs release behaviors best followed the first-order equation, while II LFs release characteristics best fitted the zero-order equation except for isoliquiritigenin. Log P mainly affect the hydrogel relaxation process for I drugs release and the drug diffusion process for II drugs release. Higher log P values for LFs resulted in higher intermolecular strength for I drugs-CP systems and lower drug solubility in the release medium for II drugs, which hindered drug release. Hydrophobic association forces in drug-CP hydrogel played a more and more dominant role in hindering I LFs release with increasing release time. On the other hand, lower drug solubility in the release medium restricted II LFs release, and the dominant role of drug solubility in the release medium increased in 24 h followed by a significant decline after 36 h. Collectively, log P of LFs served as a bridge to determine LFs compound release behaviors and classification from CP hydrogels, which provided guidelines for reasonable design of LFs hydrogels in pharmaceutical topical formulations.

Considerations on the Controlled Delivery of Bioactive Compounds through Hyaluronic Acid Membrane

(1) Background: The standard treatment for periodontal disease, a chronic inflammatory state caused by the interaction between biofilms generated by organized oral bacteria and the local host defense response, consists of calculus and biofilm removal through mechanical debridement, associated with antimicrobial therapy that could be delivered either systemically or locally. The present study aimed to determine the effectiveness of a hyaluronic acid membrane matrix as a carrier for the controlled release of the active compounds of a formulation proposed as a topical treatment for periodontal disease, and the influence of pH on the complex system’s stability. (2) Methods: The obtained hyaluronic acid (HA) hydrogel membrane with dispersed melatonin (MEL), metronidazole (MZ), and tetracycline (T) was completely characterized through FTIR, XRD, thermal analysis, UV-Vis and fluorescence spectroscopy, fluorescence microscopy, zeta potential and dielectric analysis. The MTT viability test was applied to check the cytotoxicity of the obtained membranes, while the microbiological assessment was performed against strains of Staphylococcus spp. and Streptococcus spp. The spectrophotometric investigations allowed to follow up the release profile from the HA matrix for MEL, MZ, and T present in the topical treatment considered. We studied the behavior of the active compounds against the pH of the generated environment, and the release profile of the bioactive formulation based on the specific comportment towards pH variation. The controlled delivery of the bioactive compounds using HA as a supportive matrix was modeled applying Korsmeyer–Peppas, Higuchi, first-order kinetic models, and a newly proposed pseudo-first-order kinetic model. (3) Results: It was observed that MZ and T were released at higher active concentrations than MEL when the pH was increased from 6.75, specific for patients with periodontitis, to a pH of 7.10, characterizing the healthy patients. Additionally, it was shown that for MZ, there is a burst delivery up to 2.40 × 10⁻⁵ mol/L followed by a release decrease, while for MEL and T a short release plateau was recorded up to a concentration of 1.80 × 10⁻⁵ mol/L for MEL and 0.90 × 10⁻⁵ mol/L for T, followed by a continuous release; (4) Conclusions: The results are encouraging for the usage of the HA membrane matrix as releasing vehicle for the active components of the proposed topical treatment at a physiological pH.

Biopolymers for Surgical Applications

Biopolymers have gained significant attention as a class of polymer materials with a wide range of applications, especially in the medical and pharmaceutical field. Due to particular characteristics, such as biocompatibility, biodegradability, non-toxicity, and functionality, they have become promising candidates for various surgical applications, including as bioadhesives, sealants, wound dressings, sutures, drug carriers, coating materials, etc. Recent research shows that further modification of biopolymers by advanced techniques can improve their functionality i.e., antibacterial activity, cell viability, drug-releasing capability, good wet adhesion performance, and good mechanical properties. This mini review aims to provide a brief report on the type of biopolymers and recent developments regarding their use in various surgical applications.

Quantitative Structure-Activity Relationship of Enhancers of Licochalcone A and Glabridin Release and Permeation Enhancement from Carbomer Hydrogel

This study aimed to systematically compare licochalcone A (LicA) and glabridin (Gla) (whitening agents) release and permeation from Carbomer 940 (CP) hydrogels with different enhancers, and evaluate the relationship between the quantitative enhancement efficacy and structures of the enhancers. An in vitro release study and an in vitro permeation experiment in solution and hydrogels using porcine skin were performed. We found that the Gla–CP hydrogel showed a higher drug release and skin retention amount than LicA–CP due to the higher solubility in medium and better miscibility with the skin of Gla than that of LicA. Enhancers with a higher molecular weight (MW) and lower polarizability showed a higher release enhancement effect (ERrelease) for both LicA and Gla. The Van der Waals forces in the drug–enhancers–CP system were negatively correlated with the drug release percent. Moreover, enhancers with a higher log P and polarizability displayed a higher retention enhancement effect in solution (ERsolution retention) for LicA and Gla. Enhancers decreased the whole intermolecular forces indrug–enhancers-skin system, which had a linear inhibitory effect on the drug retention. Moreover, C=O of ceramide acted asthe enhancement site for drug permeation. Consequently, Transcutol® P (TP) and propylene glycol (PG), seven enhancers showed a higher retention enhancement effect in hydrogel (ERhydrogel retention) for LicA and Gla. Taken together, the conclusions provide a strategy for reasonable utilization of enhancers and formulation optimization in topical hydrogel whitening.

Major difference in particle size, minor difference in release profile: a case study of solid lipid nanoparticles

Solid lipid nanoparticles (SLN) have been widely used in a variety of drug delivery routes, which have the outstanding advantage of controlled drug release. The release of SLN is dominated by many factors, among which the particle size of SLN is a critical one. The aim of this project was to explore the relationship between drug release profile and particle size of SLN. SLN were synthesized via the hot high-pressure homogenization (HPH) method, budesonide (BUD) was used as the model drug, and BUD-SLN1-BUD-SLN4 with increasing particle size was obtained, i.e. 120, 240, 360, and 480 nm. The prepared SLN has good encapsulation efficiency, drug loading capacity, and stability. In vitro release behavior studies showed that the cumulative release of BUD-SLN in Tris-Maleate (Tris-M) media was negligible, while that in Tris-M plus pancreatin media or Tris-M-ethanol media obeyed Ritger-Peppas model or first-order kinetic model, respectively. Noticeably, the release behavior of SLN was to some extent related to the average particle size of SLN, but the correlation was insignificant when the intersection degree of particle size distribution was great. This study provides a new idea for the understanding of in vitro release of SLN and has a certain referencing value for the research and development of novel nanomedicines.

Mechanism insight on drug skin delivery from polyurethane hydrogels: Roles of molecular mobility and intermolecular interaction

Though polyurethane (PU) hydrogel had great potential in topical drug delivery system, drug skin delivery behavior from hydrogel and the underlying molecular mechanism were still unclear. In this study, PU and Carbomer (CP as control) hydrogels were prepared with lidocaine (LID) and ofloxacin (OFX) as model drugs. In vitro skin permeation and tissue distribution study were conducted to evaluate the drug delivery behaviors. The underlying molecular mechanisms were characterized by drug release with octanol as release medium, rheological study, ATR-FTIR, NMR, and molecular simulation. The results showed that the skin permeation amount of LID-PU (45.50 ± 7.12 μg) was lower than LID-CP (45.50 ± 7.12 μg). And the LID diffusion coefficient of PU (26.21 μg/h^0.5) was also lower than CP (31.30 μg/h^0.5), which attributed to H-bonding between LID (-CONH) and PU (-NHCOO). However, the OFX-PU showed a higher skin permeation amount (10.06 ± 1.29 μg) than OFX-CP (5.28 ± 1.39 μg). And the OFX-PU also showed a higher diffusion coefficient (30.0 μg/h^0.5) than OFX-CP (21.37 μg/h^0.5), which was caused by increased mobility of hydrogel when interaction action site was C-O-C in PU. In conclusion, drug skin delivery behavior from PU hydrogel was controlled by molecular mobility and intermolecular interaction, which clarified the influence of the functional group of PU hydrogel on drug skin delivery behavior and broadened our understanding of PU hydrogel application in topical drug delivery system.

Promising nanogels loaded with usnic acid for oral ulcer treatment: development, characterization, and in vivo evaluation in rabbits

This study aimed to present an effective formulation targeting oral ulcers that will remain in the application site for a longer period, reducing the frequency of administration. As a candidate formulation, usnic acid (UA) was loaded into the optimum nanogels. The characterization studies included physical, rheological, and bioadhesive properties as well as in vitro release and ex vivo studies. The rheological results revealed that the nanogels present pseudoplastic flow behavior. In vitro drug release showed a prolonged pattern. In further, the chosen UA nanogels showed very low percentages of penetration and permeation. F13, which showed the highest release, suitable bioadhesive properties (0.475 ± 0.033 N/cm²) and eligible particle size (250.22 ± 4.11 nm), PDI (0.089 ± 0.052), and zeta potential (20.56 ± 0.330 mV) values were chosen for in vivo experiments. The selected UA nanogels showed effective antimicrobial activity against Bacillus Cereus and great in vivo wound healing properties. The results indicated that suitable UA nanogels with desired properties could be prepared. The therapeutic potential of the nanogels for oral ulcers was assessed using an animal model and the histopathological findings suggested that the optimized formulation is a good choice for oral ulcer treatment. Nonetheless, further research is recommended to support its efficacy by applying pharmacodynamic and pharmacokinetic studies in human individuals.

Mitochondrial targeted doxorubicin derivatives delivered by ROS-responsive nanocarriers to breast tumor for overcoming of multidrug resistance

Multidrug resistance (MDR) is a serious challenge in chemotherapy and also a major threat to breast cancer treatment. As an intracellular energy factory, mitochondria provide energy for drug efflux and are deeply involved in multidrug resistance. Mitochondrial targeted delivery of doxorubicin can overcome multidrug resistance by disrupting mitochondrial function. By incorporating a reactive oxygen species (ROS)-responsive hydrophobic group into the backbone structure of hyaluronic acid - a natural ligand for the highly expressed CD44 receptor on tumor surfaces, a novel ROS-responsive and CD44-targeting nano-carriers was constructed. In this study, mitochondria-targeted triphenylphosphine modified-doxorubicin (TPP-DOX) and amphipathic ROS-responsive hyaluronic acid derivatives (HA-PBPE) were synthesized and confirmed by ¹H NMR. The nanocarriers TPP-DOX @ HA-PBPE was prepared in a regular shape and particle size of approximately 200 nm. Compared to free DOX, its antitumor activity in vitro and tumor passive targeting in vivo has been enhanced. The ROS-responsive TPP-DOX@HA-PBPE nanocarriers system provide a promising strategy for the reverse of MDR and efficient delivery of doxorubicin derivatives into drug-resistant cancer cells.

Tazarotene-loaded in situ gels for potential management of psoriasis: biocompatibility, anti-inflammatory and analgesic effect

Psoriasis is a chronic autoinflammatory disorder characterized by patches of abnormal skin. For psoriasis management, the application of topical retinoids as Tazarotene is recommended. However, Tazarotene could induce skin irritation limiting its use. Herein, it is evaluated the possible usage of in situ gels for tazarotene skin delivery. The topical in situ gels were developed using thermosensitive poloxamers via cold method. They were examined for their appearance, sol-gel temperature, clarity, pH, viscosity, in vitro release, and stability. Their biocompatibility was evaluated by investigating their cytotoxicity and irritation inducing capacity. The possible anti-inflammatory and analgesic activities were determined by measuring the nitric oxide and prostaglandin E₂ levels production in LPS-stimulated RAW264.7 murine macrophage cells. It was revealed that the in situ gels had no cytotoxic effect (∼95-100% cell viability) and nor irritation potential (∼97% cell viability), according to the in vitro EpiDerm™ reconstituted skin irritation test. Additionally, the 10% tazarotene-in situ gels showed possible analgesic activity since the production of prostaglandin E₂ (PGE₂) was decreased. In further, both concentrations of 5% and 10% tazarotene-in situ gels inhibited significantly the nitrite oxide production at 16% and 19%, respectively. Finally, the prepared in situ gels can act as a potential non-irritant alternative option for tazarotene topical skin delivery.

Hyaluronic acid on the urokinase sustained release with a hydrogel system composed of poloxamer 407: HA/P407 hydrogel system for drug delivery

Pleural empyema is an inflammatory condition characterized by accumulation of pus inside the pleural cavity, which is usually followed by bacterial pneumonia. During the disease process, the pro-inflammatory and pro-fibrotic cytokines in the purulent pleural effusion cause proliferation of fibroblasts and deposition of extracellular matrix, which lead to fibrin deposition and fibrothorax. Urokinase instillation therapy through a chest drainage tube is frequently used for fibrinolysis in patients with empyema. However, urokinase treatment requires multiple instillation (2-3 times per day, for 4-8 days) and easily flows out from the chest drainage tube due to its high water solubility. In this in vitro study, we developed a thermo-responsive hydrogel based on poloxamer 407 (P407) combined with hyaluronic acid (HA) for optimal loading and release of urokinase. Our results show that the addition of HA to poloxamer gels provides a significantly more compact microstructure, with smaller pore sizes (**p < 0.001). The differential scanning calorimetry (DSC) profile revealed no influence on the micellization intensity of poloxamer gel by HA. The 25% poloxamer-based gel was significantly superior to the 23% poloxamer-based gel, with slower gel erosion when comparing the 16th hour residual gel weight of both gels (*p < 0.05; **p < 0.001). The 25% poloxamer-HA gel also exhibited a superior urokinase release profile and longer release time. A Fourier-transform infrared spectroscopy (FT-IR) study of the P407/HA hydrogel showed no chemical interactions between P407 and HA in the hydrogel system. The thermoresponsive P407/HA hydrogel may have a promising potential in the loading and delivery of hydrophilic drugs. On top of that, in vitro toxicity test of this combination demonstrates a lower toxicity.

Chitosan-Graft-Poly(N-Isopropylacrylamide)/PVA Cryogels as Carriers for Mucosal Delivery of Voriconazole

The objective of this study was to prepare and characterize physically crosslinked gel formulations of chitosan (CS)-graft-poly(N-isopropyl acrylamide) (PNIPAAm) and polyvinyl alcohol (PVA) for smart delivery of an antifungal drug, Voriconazole, for mucosal applications. For this purpose, cryogels of CS-g-PNIPAAm/PVA and CS/PVA were tested by means of texture profile analysis and rheology to determine optimal matrix properties for topical application. The ratio of 75/25 v/v % CS-g-PNIPAAm/PVA was selected to be used for formulation since it gave low compressibility and hardness (1.2 and 0.6 N) as well as high adhesion properties and non-Newtonian flow behavior. The cryogels and formulations were further characterized by means of FTIR spectroscopy, swelling behavior, texture analysis, scanning electron microscopy (SEM), thermal (differential scanning calorimetry (DSC) and TGA), and rheological behavior. The drug loading capacity and in vitro release profile of the drug, storage stability, and cytotoxicity tests were also performed for the gel formulation. The FTIR, DSC, and TGA results verified the successful formation of cryogels. Swelling studies revealed a pH-dependent swelling ability with a maximum swelling degree of 1200% in acid and 990% in phosphate buffer (pH = 7.4). Thermal studies showed that CS-g-PNIPAAm/PVA 75/25 had higher thermal stability proving the structural complexity of the polymer. The loading capacity of Voriconazole was found to be 70% (w/w). The in vitro release profiles of Voriconazole showed Fickian release behavior for CS-g-PNIPAAm/PVA 75/25 gel with an approximate delivery of 38% within 8 h, slower than matrices containing unmodified chitosan. The storage stability test exhibited that the gel formulation was still stable even after aging for two months. Moreover, the cell culture assays revealed a non-toxic character of the polymeric matrix. Overall results showed that the CS-g-PNIPAAm/PVA 75/25 hydrogel has the potential to be used as a smart polymeric vehicle for topical applications.

Dual-Prevention for UV-Induced Skin Damage: Incorporation of Melatonin-Loaded Elastic Niosomes into Octyl Methoxycinnamate Pickering Emulsions

Incorporation of antioxidants into sunscreens is a logical approach, yet co-delivery of them with UV filters is a challenge. Here, we purposed a combination therapy, in which the chemical UV filter, octyl methoxycinnamate, was accumulated on upper skin while the antioxidant, melatonin, can penetrate deeper layers to show its effects. Melatonin-loaded elastic niosomes and octyl methoxycinnamate Pickering emulsion were prepared separately. Lyophilized elastic niosomes were dispersed into the Pickering emulsion to prepare the proposed combination formulation. The characterization studies of the formulations revealed that elastic niosomes can be prepared with tunable nanometer sizes, whereas Pickering emulsions can encapsulate the UV filter in micrometer-sized droplets. Melatonin-loaded elastic niosomes prepared with Tween80/Span80 mixture were 146 nm with a PI of 0.438, and 58.42% entrapment efficiency was achieved. The mean diameter size of the combination formulation was 27.8 μm. Ex vivo permeation studies revealed that 7.40% of octyl methoxycinnamate and 58% of melatonin were permeated through the rat skin while 27.6% octyl methoxycinnamate and 37% of melatonin accumulated in the skin after 24 h. Cell culture studies with real-time cell analyzer showed that the proposed formulation consist of melatonin-loaded elastic niosomes and octyl methoxycinnamate Pickering emulsion had no negative effect on the cell proliferation and viability. According to α,α-diphenyl-β-picrylhydrazyl free radical scavenging method, the proposed formulation showed as high antioxidant activity as melatonin itself. It is concluded that the proposed formulation would be a promising dual therapy for UV-induced skin damage with co-delivery strategy.

Toxicity, Biocompatibility, pH-Responsiveness and Methotrexate Release from PVA/Hyaluronic Acid Cryogels for Psoriasis Therapy

Poly(vinyl alcohol)/hyaluronic acid cryogels loaded with methotrexate were studied. The physical⁻chemical characterization of cryogels was performed by FT-IR spectroscopy, scanning electron microscopy, differential scanning calorimetry and dynamic mechanical thermal analysis. Acute toxicity and haematological parameters were determined by "in vivo" tests. The biocompatibility tests proved that the obtained cryogels showed significantly decreased toxicity and are biocompatible. The pH-responsiveness of the swelling behaviour and of the methotrexate release from the poly(vinyl alcohol)/hyaluronic acid (PVA/HA) cryogels were studied in a pH interval of 2⁻7.4. A significant change in properties was found at pH 5.5 specific for treatment of affected skin in psoriasis disease.