Mucoadhesive films based on gellan gum/pectin blends as potential platform for buccal drug delivery

Liposomal propolis loaded xanthan gum-salep hydrogels: Preparation, characterization, and in vitro bioaccessibility of phenolics

Liposomes are gaining interest in food and pharmaceutical applications due to their biocompatibility and non-toxicity. However, they suffer from low colloidal stability, leakage of encapsulated substances, and poor resistance to intestinal digestive conditions. To address these issues, propolis extract (PE) was encapsulated within a hybrid system combining liposomes and hydrogels. PE encapsulated in phosphatidylcholine liposome formulations incorporated with two different food additives: polyethylene sorbitan monooleate (T80) and ammonium phosphatide (AMP) was embedded in xanthan gum-salep hydrogels. The embedded liposomes protected their structure and did not change the flow behaviour of the hydrogels. AMP-liposomal gels exhibited a stronger solid character. The mucoadhesiveness of liposomal gels was mostly governed by the higher xanthan gum ratio, while PE loading also yielded higher mucoadhesiveness. The bioaccessibility (BI%) of the phenolic compounds ranged from 10.13 to 582.75 % in the liposomal gel. The proposed hybrid encapsulation method not only provided enhanced solubility to hydrophobic PE but also protected its phenolic compounds against simulated digestion conditions. Moreover, converting aqueous liposomes into gel structures would also expand their application range in various functional food formulations.

Emerging trends in designing polysaccharide based mucoadhesive network hydrogels as versatile platforms for innovative delivery of therapeutic agents: A review

INTRODUCTION

The rapid progress in polymer science has designed innovative materials for biomedical applications. In the case of drug design, for each new therapeutic agent, a drug delivery system (DDS) is required to improve its pharmacokinetic and pharmacodynamic parameters. Therefore, significant research has been carried out to develop drug delivery (DD) carriers for these new therapeutic agents. Hydrogels have been explored as potential candidates to prepare controlled drug delivery (CDD) systems to address the challenges related to the performance of the conventional DD formulations. Mucoadhesive drug delivery system (MUCO-DDS) is a specialized form of CDD system, facilitating site-specific DD, protecting the drug from first pass metabolism and enhancing its overall bioavailability.

METHODS

The present article provides a comprehensive discussion of the synthesis, properties and applications of polysaccharide-derived MUCO-DDS. Different natural polymer-derived MUCO-DDS including chitosan, alginate, pectin, xanthan gum, psyllium, gelatin, cellulose, hyaluronic acid, guar gum, sterculia gum and tragacanth gum have been reported. Herein, these DDS were elaborately discussed along with their applications and future-prospective. These DDS are classified on the basis of drug administration (nasal, ocular, vagina/rectal & buccal DDS) and drug distribution (reservoir and monolithic polymer matrix). Factors contributing to modifications of properties of MUCO-DDS were also demonstrated along with different stages and theories of mucoadhesion.

RESULTS

Polysaccharides exhibit properties such as biocompatibility, biodegradability, and flexibility, making them ideal for CDD applications. MUCO-DDS demonstrates several significant advantages. Moreover, the article bridges theoretical insights with practical applications and future research prospects, ensuring its relevance for advancements in the concerned field. This review serves as a comprehensive resource, addressing gaps in previous literature and paving the way for innovations in MUCO-DDS, through a comparative analysis of the advantages, limitations, and modifications of natural polymers.

CONCLUSIONS

In conclusion, this review gives an overview of the current developments in the field of mucoadhesive DD systems and also gives insights into the future perspectives. The MUCOAD of DDS could be modulated by the inclusion of various natural and synthetic components in hydrogels. Future directions for the researchers are underway to integrate nanotechnology with mucoadhesive systems to create hybrid platforms. Overall, by addressing current limitations and leveraging emerging technologies, these systems can revolutionize drug delivery for a wide range of therapeutic applications.

Novel nutraceutical delivery system utilizing a bigel formulated with sesame oil, kokum butter, and pectin

This study delineates biobased foods. Curcumin (CRU) delivery modules were studied using pectin gel, Sesame oil (SO), and Kokum butter (KB) oleogel (OG). SB1, the control, has 10% OG. The pectin gel between 10 and 50% oleogel were emulsified by 2.5% tween 80. Surface, physical, chemical, and physiochemical properties of prepared bigels were examined. Microscopic studies show biphasic feature. With OG content, FTIR shows hydrogen bonding increasing and decreasing. XRD confirmed gel amorphousness. Stress relaxation indicated 10% control bigel had considerably less strength. Bigel impedance factors increased considerably with OG content, according to impedance profiles. The moisture study found that replacing hydro phase with OG phase in formulations reduced moisture content from 10 to 50%. Less CRU released from 20 to 50% bigel matrices than 10% during in vitro studies. Acidic pH hindered polymer relaxation, altering release behaviour. Overall, the bigels were studied and shown to regulate oral CRU administration.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-024-01559-3.

Tailored Sticky Solutions: 3D-Printed Miconazole Buccal Films for Pediatric Oral Candidiasis

In this research, 3D-printed antifungal buccal films (BFs) were manufactured as a potential alternative to commercially available antifungal oral gels addressing key considerations such as ease of manufacturing, convenience of administration, enhanced drug efficacy and suitability of paediatric patients. The fabrication process involved the use of a semi-solid extrusion method to create BFs from zein-Poly-Vinyl-Pyrrolidone (zein-PVP) polymer blend, which served as a carrier for drug (miconazole) and taste enhancers. After manufacturing, it was determined that the disintegration time for all films was less than 10 min. However, these films are designed to adhere to buccal tissue, ensuring sustained drug release. Approximately 80% of the miconazole was released gradually over 2 h from the zein/PVP matrix of the 3D printed films. Moreover, a detailed physicochemical characterization including spectroscopic and thermal methods was conducted to assess solid state and thermal stability of film constituents. Mucoadhesive properties and mechanical evaluation were also studied, while permeability studies revealed the extent to which film-loaded miconazole permeates through buccal tissue compared to commercially available oral gel formulation. Histological evaluation of the treated tissues was followed. Furthermore, in vitro antifungal activity was assessed for the developed films and the commercial oral gel. Finally, films underwent a two-month drug stability test to ascertain the suitability of the BFs for clinical application. The results demonstrate that 3D-printed films are a promising alternative for local administration of miconazole in the oral cavity.

Fabrication, Functional Properties, and Potential Applications of Mixed Gellan-Polysaccharide Systems: A Review

Gellan, an anionic heteropolysaccharide synthesized by Sphingomonas elodea, is an excellent gelling agent. However, its poor mechanical strength and high gelling temperature limit its application. Recent studies have reported that combining gellan with other polysaccharides achieves desirable properties for food- and biomaterial-related applications. This review summarizes the fabrication methods, functional properties, and potential applications of gellan-polysaccharide systems. Starch, pectin, xanthan gum, and konjac glucomannan are the most widely used polysaccharides in these composite systems. Heating-cooling and ionic-induced cross-linking approaches have been used in the fabrication of these systems. Composite gels fabricated using gellan and various polysaccharides exhibit different functional properties, possibly because of their distinct molecular interactions. In terms of applications, mixed gellan-polysaccharide systems have been extensively used in texture modification, edible coatings and films, bioactive component delivery, and tissue-engineering applications. Further scientific studies, including structural determinations of mixed systems, optimization of processing methods, and expansion of applications in food-related fields, are needed.

Biopolymer Drug Delivery Systems for Oromucosal Application: Recent Trends in Pharmaceutical R&D

Oromucosal drug delivery, both local and transmucosal (buccal), is an effective alternative to traditional oral and parenteral dosage forms because it increases drug bioavailability and reduces systemic drug toxicity. The oral mucosa has a good blood supply, which ensures that drug molecules enter the systemic circulation directly, avoiding drug metabolism during the first passage through the liver. At the same time, the mucosa has a number of barriers, including mucus, epithelium, enzymes, and immunocompetent cells, that are designed to prevent the entry of foreign substances into the body, which also complicates the absorption of drugs. The development of oromucosal drug delivery systems based on mucoadhesive biopolymers and their derivatives (especially thiolated and catecholated derivatives) is a promising strategy for the pharmaceutical development of safe and effective dosage forms. Solid, semi-solid and liquid pharmaceutical formulations based on biopolymers have several advantageous properties, such as prolonged residence time on the mucosa due to high mucoadhesion, unidirectional and modified drug release capabilities, and enhanced drug permeability. Biopolymers are non-toxic, biocompatible, biodegradable and may possess intrinsic bioactivity. A rational approach to the design of oromucosal delivery systems requires an understanding of both the anatomy/physiology of the oral mucosa and the physicochemical and biopharmaceutical properties of the drug molecule/biopolymer, as presented in this review. This review summarizes the advances in the pharmaceutical development of mucoadhesive oromucosal dosage forms (e.g., patches, buccal tablets, and hydrogel systems), including nanotechnology-based biopolymer nanoparticle delivery systems (e.g., solid lipid particles, liposomes, biopolymer polyelectrolyte particles, hybrid nanoparticles, etc.).

Synergistic effects of thyme and oregano essential oil combinations for enhanced functional properties of sericin/pectin film

This work aimed to assess the synergistic antibacterial effects of thyme and oregano essential oils in various ratios (thyme:oregano; 10:0, 8:2, 6:4, 4:6, 2:8, 10:0). We hypothesized that the synergistic combination of thyme and oregano essential oils can be effectively incorporated into sericin/pectin film to enhance its functional properties. Among the combinations tested, the mixture of thyme/oregano essential oil (TOE) at an 8:2 ratio exhibited the most potent synergistic activity against P. aeruginosa and S. aureus, with fractional inhibitory concentration index (FICindex) of 0.9. In this combination, thymol constituting 51.83 % of TOE (8:2), was the predominant component. TOE at an 8:2 ratio was selected to incorporate into sericin/pectin film. Different concentrations of TOE (0.8 %, 1.2 % and 1.6 %) were applied to evaluate their impact on film properties compared to a film without essential oil (control). It was found that increasing TOE concentration (control; 0 %) to 1.6 % reduced film moisture content (from 21.53 % to 16.91 %), decreased yellowness (from 18.24 to 15.92), diminished gloss (from 63.79 to 11.18), lowered swelling index (from 1.24 to 0.98), and reduced tensile strength (from 9.70 to 4.14 MPa). However, the addition of TOE showed higher film total phenolic content (8.59-31.53 mg gallic acid/g dry sample) and increased antioxidant activity (0.99-3.68 μmol Trolox /g dry sample). Moreover, the film with 1.2 % and 1.6 % of thyme/oregano essential oil exhibited inhibitory effects against all tested bacteria. Therefore, the thyme/oregano essential oil combination can provide the desirable physicochemical properties of the sericin/pectin film, as well as its antibacterial and antioxidant activities, making it a promising alternative for food packaging material applications.

Advances in tissue engineering of gellan gum-based hydrogels

Gellan Gum (GG) is a large, naturally occurring, linear polysaccharide with a similar structure and biological properties to the extracellular matrix. It's appropriate as a matrix material for the development of different composite materials due to its biocompatibility, biodegradability, and injectability. Hydrogels made from GG have found various applications in the field of Tissue Engineering (TE) in recent years after being mixed with a variety of other organic and inorganic components. These composites are considered multifunctional developing biomaterials because of their impressive mechanical capabilities, biocompatibility, low cytotoxicity, etc. This review focuses on the emerging advances of GG-based hydrogels in TE, providing an overview of the applications of different types of GG-based composite materials in bone TE, cartilage TE, nervous TE, retina TE, and other fields. Moreover, the investigations of GG-based hydrogels as bioink components for 3D bioprinting in TE will be elucidated. This review offers general guidance for the development of biomaterials related to GG, as well as ideas for future clinical diagnosis and treatment.

Semiochemical delivery systems based on natural polymers to attract sand flies (Diptera: Psychodidae)

BACKGROUND

The successful use of semiochemicals to attract insects to traps is based on research on the most suitable compounds and their release profiles over time. Based on the group's promising results, matrices with a more adequate release profile and more eco-friendly properties for the release of 1-hexanol were developed. To use a more suitable prototype in the field, the most promising systems were added to a capsule and evaluated in a wind tunnel. Behavioral experiments were performed using the sand fly species, Lutzomyia longipalpis, to evaluate the efficacy of the proposed system.

METHODS

Different delivery systems were developed by varying the polymer (gellan gum and pectin) ratio, crosslinker (aluminum chloride) concentration, and glutaraldehyde removal.The delivery systems were loaded with 1-hexanol, and their release profiles were evaluated using gravimetric analysis under ambient and high-humidity conditions. When the matrix system was placed inside a plastic container, modulations in the active release profile were observed and the system could be reused. Actid attraction behaviors of the sand fly species, Lu. longipalpis, were evaluated in a wind tunnel when exposed to 1-hexanol-loaded release systems at different times.

RESULTS

Among the four formulations evaluated, System 2 (gellan gum and pectin in a 1:1 ratio with 5% aluminum chloride) exhibited the most promising release profile, with greater uniformity and longer compound release time. The maximum 1-hexanol release uniformity was achieved over a longer time, mainly every 24 h, under both ambient and high-humidity conditions. System 2 can be reused at least once with the same structure. The wind tunnel trials exhibited efficient activation and attraction of Lu. longipalpis to 1-hexanol after 24, 48, and 72 h in System 2 placed inside the capsules.

CONCLUSIONS

The polymeric matrix supplemented with 1-hexanol and introduced in plastic capsules showed promising results in attracting sand flies. This system can be used as a solution for other attractive compounds as well as in other applications where their release needs to be controlled or prolonged.

Formulation and Characterization of Emulgel-Based Jelly Candy: A Preliminary Study on Nutraceutical Delivery

The development of consumer-friendly nutraceutical dosage forms is highly important for greater acceptance. In this work, such dosage forms were prepared based on structured emulsions (emulgels), where the olive oil phase was filled within the pectin-based jelly candy. The emulgel-based candies were designed as bi-modal carriers, where oil-soluble curcumin and water-soluble riboflavin were incorporated as the model nutraceuticals. Initially, emulsions were prepared by homogenizing varied concentrations (10% to 30% (w/w)) of olive oil in a 5% (w/w) pectin solution that contained sucrose and citric acid. Herein, pectin acted as a structuring agent-cum-stabilizer. Physico-chemical properties of the developed formulations were thoroughly analyzed. These studies revealed that olive oil interferes with the formation of polymer networks of pectin and the crystallization properties of sugar in candies. This was confirmed by performing FTIR spectroscopy and DSC studies. In vitro disintegration studies showed an insignificant difference in the disintegration behavior of candies, although olive oil concentration was varied. Riboflavin and curcumin were then incorporated into the jelly candy formulations to analyze whether the developed formulations could deliver both hydrophilic and hydrophobic nutraceutical agents. We found that the developed jelly candy formulations were capable of delivering both types of nutraceutical agents. The outcome of the present study may open new directions for designing and developing oral nutraceutical dosage forms.

Films composed of white angico gum and chitosan containing chlorhexidine as an antimicrobial agent

Anadenanthera colubrina, popularly known as white angico, is a species extensively cultivated in Brazil, mainly in the cerrado region, including the state of Piauí. This study examines the development of films composed of white angico gum (WAG) and chitosan (CHI) and containing chlorhexidine (CHX), an antimicrobial agent. The solvent casting method was used to prepare films. Different combinations and concentrations of WAG and CHI were used to obtain films with good physicochemical characteristics. Properties such as the in vitro swelling ratio, the disintegration time, folding endurance, and the drug content were determined. The selected formulations were characterised by scanning electron microscopy, Fourier-transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and X-ray diffraction, and the CHX release time and antimicrobial activity were evaluated. CHX showed a homogenous distribution in all CHI/WAG film formulations. The optimised films showed good physicochemical properties with 80% CHX release over 26 h, which is considered promising for local treatment of severe lesions in the mouth. Cytotoxicity tests of the films did not show toxicity. The antimicrobial and antifungal effects were very effective against the tested microorganisms.

Piperine-loaded nanoparticles incorporated into hyaluronic acid/sodium alginate-based membranes for the treatment of inflammatory skin diseases

Piperine is an alkaloid mostly found in the fruits of several species of the Piper genus, and its anti-inflammatory potential is already known. However, its therapeutic applications still need to be better explored due to the low aqueous solubility of this active. To overcome this drawback, the objective of this work was to evaluate the efficiency of the nanoencapsulation of the compound as well as its incorporation into hyaluronic acid/alginate-based biomembranes. Polymeric nanoparticles composed of Eudragit S100 and Poloxamer 188 were obtained by the nanoprecipitation technique, obtaining spherical nanosized particles with an average diameter of 122.1 ± 2.0 nm, polydispersity index of 0.266, and encapsulation efficiency of 76.2 %. Hyaluronic acid/sodium alginate membranes were then prepared and characterized. Regarding permeation, a slow passage rate was observed until the initial 14 h, when an exponential increase in the recovered drug concentration began to occur. The in vivo assay showed a reduction in inflammation up to 43.6 %, and no cytotoxicity was observed. The results suggested the potential of the system developed for the treatment of inflammatory skin diseases.

Ionotropic Gelation and Chemical Crosslinking as Methods for Fabrication of Modified-Release Gellan Gum-Based Drug Delivery Systems

Hydrogels have a tridimensional structure. They have the ability to absorb a significant amount of water or other natural or simulated fluids that cause their swelling albeit without losing their structure. Their properties can be exploited for encapsulation and modified targeted drug release. Among the numerous natural polymers suitable for obtaining hydrogels, gellan gum is one gaining much interest. It is a gelling agent with many unique features, and furthermore, it is non-toxic, biocompatible, and biodegradable. Its ability to react with oppositely charged molecules results in the forming of structured physical materials (films, beads, hydrogels, nanoparticles). The properties of obtained hydrogels can be modified by chemical crosslinking, which improves the three-dimensional structure of the gellan hydrogel. In the current review, an overview of gellan gum hydrogels and their properties will be presented as well as the mechanisms of ionotropic gelation or chemical crosslinking. Methods of producing gellan hydrogels and their possible applications related to improved release, bioavailability, and therapeutic activity were described.

Exploiting Polymeric Films as a Multipurpose Drug Delivery System: a Review

Polymeric films are drug delivery systems that maintain contact with the delivery tissue and sustain a controlled release of therapeutic molecules. These systems allow a longer time of drug contact with the target site in the case of topical treatments and allow the controlled administration of drugs. They can be manufactured by various methods such as solvent casting, hot melt extrusion, electrospinning, and 3D bioprinting. Furthermore, they can employ various polymers, for example PVP, PVA, cellulose derivatives, chitosan, gelling gum, pectin, and alginate. Its versatility is also applicable to different routes of administration, as it can be administered to the skin, oral mucosa, vaginal canal, and eyeballs. All these factors allow numerous combinations to obtain a better treatment. This review focuses on exploring some possible ways to develop them and some particularities and advantages/disadvantages in each case. It also aims to show the versatility of these systems and the advantages and disadvantages in each case, as they bring the opportunity to develop different medicines to facilitate therapies for the most diverse purposes .

Solid Dispersions Incorporated into PVP Films for the Controlled Release of Trans-Resveratrol: Development, Physicochemical and In Vitro Characterizations and In Vivo Cutaneous Anti-Inflammatory Evaluation

Trans-resveratrol can promote various dermatological effects. However, its high crystallinity decreases its solubility and bioavailability. Therefore, solid dispersions have been developed to promote its amorphization; even so, they present as powders, making cutaneous controlled drug delivery unfeasible and an alternative necessary for their incorporation into other systems. Thus, polyvinylpyrrolidone (PVP) films were chosen with the aim of developing a controlled delivery system to treat inflammation and bacterial infections associated with atopic dermatitis. Four formulations were developed: two with solid dispersions (and trans-resveratrol) and two as controls. The films presented with uniformity, as well as bioadhesive and good barrier properties. X-ray diffraction showed that trans-resveratrol did not recrystallize. Fourier-transform infrared spectroscopy (FT-IR) and thermal analysis evidenced good chemical compatibilities. The in vitro release assay showed release values from 82.27 ± 2.60 to 92.81 ± 2.50% (being a prolonged release). In the in vitro retention assay, trans-resveratrol was retained in the skin, over 24 h, from 42.88 to 53.28%. They also had low cytotoxicity over fibroblasts. The in vivo assay showed a reduction in inflammation up to 66%. The films also avoided Staphylococcus aureus’s growth, which worsens atopic dermatitis. According to the results, the developed system is suitable for drug delivery and capable of simultaneously treating inflammation and infections related to atopic dermatitis.

Applying design of experiments (DoE) on the properties of buccal film for nicotine delivery

Design of experiments is used to optimize ratios between deproteinized natural rubber latex, Eudragit® NM 30 D, and pectin for nicotine buccal film with dependent variables as moisture content, moisture uptake, and swelling index in simulated saliva 3 and 5 h. Mathematical models were linear for moisture content and moisture uptake, while swelling index in simulated saliva 3 and 5 h was a quadratic model. Optimized polymer ratio was 0.319:0.362:0.319, respectively. Experimental values were 13.17 ± 0.92%, 3.96 ± 0.84%, 112.58 ± 22.63%, and 124.69 ± 8.01% for dependent variables, respectively. The buccal film showed high swelling at pH 7 and swelling–deswelling behaviors in a water/ethanol environment. The surface pH, weight, and thickness were 8.11, 63.28 ± 6.18 mg, and 219.87 ± 44.28 µm, respectively. Nicotine content was found as 10.22 ± 0.46 mg/4 cm2. Maximum cumulative nicotine release was 9.82 ± 0.94 mg/4 cm2. Kinetic model fitted to the Korsmeyer-Peppas model and release exponent was 0.36, representing that release mechanism was controlled by Fickian diffusion release.

Mucoadhesive Delivery System: A Smart Way to Improve Bioavailability of Nutraceuticals

The conventional oral administration of many nutraceuticals exhibits poor oral bioavailability due to the harsh gastric conditions and first-pass metabolism. Oral mucosa has been recognized as a potential site for the delivery of therapeutic compounds. The mucoadhesive formulation can adhere to the mucosal membrane through various interaction mechanisms and enhance the retention and permeability of bioactive compounds. Absorption of bioactive compounds from the mucosa can improve bioavailability, as this route bypasses the hepatic first-pass metabolism and transit through the gastrointestinal tract. The mucosal administration is convenient, simple to access, and reported for increasing the bioactive concentration in plasma. Many mucoadhesive polymers, emulsifiers, thickeners used for the pharmaceutical formulation are accepted in the food sector. Introducing mucoadhesive formulations specific to the nutraceutical sector will be a game-changer as we are still looking for different ways to improve the bioavailability of many bioactive compounds. This article describes the overview of buccal mucosa, the concept of mucoadhesion and related theories, and different techniques of mucoadhesive formulations. Finally, the classification of mucoadhesive polymers and the mucoadhesive systems designed for the effective delivery of bioactive compounds are presented.

Recent advances of oral film as platform for drug delivery

Orally drug delivery film has received extensive interest duo to a distinct set of its advantageous properties compared to the traditional orally administered dosages, including faster rate of drug absorption, higher bioavailability and better patient compliance for children and elders with swallowing deficiencies. In particular, its potential capacity of delivering proteins and peptides has further attracted great attention. Lately, tremendous advances have been made in designing and developing both novel mucoadhesive films and orodispersible films to fulfill specific accomplishments of drug delivery. This review aims to summarize those newly developed oral films, discussing their formulation strategies, manufacturing methods as well as advantages and limitations thereof. Conclusions and future perspectives are also provided in brief.

Immobilized anticancer agents and metal nanoparticles in a matrix of gellan: achievements and prospects

A review is devoted to recent achievements in development of anticancer drugs based on natural polysaccharide – gellan that possesses coil-helix conformational transition, sol-gel phase transition, thermo- and salt sensitivity. The characteristics of high- and low-acyl gellan are briefly given and the influence of mono- and multivalent metal ions on the gelation efficiency is described. The mucoadhesive properties of gellan and its modified derivatives are briefly considered in the context of application in pharmacy as oral, buccal, nasal, ophthalmologic, vaginal forms. The main attention is paid to anticancer drugs, gold and silver nanoparticles immobilized within gellan matrix by chemical bonds, physical adsorption and chemosorption. The state-of-the art and perspectives of development of plasmonic photothermal therapy of cancer cells that is one of the promising direction of nanomedicine in diagnosis and treatment of oncological diseases are highlighted. It is outlined that the further strategy of development and application of plasmonic photothermal therapy into clinical practice is due to selection of metal nanoparticles with optimal sizes, high concentration, low cytotoxicity and suitable optical characteristics.

Hybrid nanofilms as topical anesthetics for pain-free procedures in dentistry

Topical anesthetics are widely applied in order to relieve the discomfort and anxiety caused by needle insertion and other painful superficial interventions at the oral cavity. So far, there are no commercially available effective topical anesthetic formulations for that purpose, and the most of developments are related to hydrophilic and low mucoadhesive forms. Therefore, we have prepared different hybrid nanofilms composed of biopolymer matrices (chitosan, pectin, and chitosan-pectin) blended with nanostructured lipid carriers (NLC) loading the eutectic mixture of 5% lidocaine-prilocaine (LDC-PLC), in order to fulfill this gap in the market. These dual systems were processed as hybrid nanofilms by the solvent/casting method, and its mucoadhesive, structural and mechanical properties were detailed. The most appropriate hybrid nanofilm combined the advantages of both pectin (PCT) and NLC components. The resultant material presented sustained LDC-PLC release profile for more than 8 h; permeation across porcine buccal mucosa almost twice higher than control and non-cytotoxicity against 3T3 and HACAT cell lines. Then, the in vivo efficacy of PCT/NLC formulation was compared to biopolymer film and commercial drug, exhibiting the longest-lasting anesthetic effect (> 7 h), assessed by tail flick test in mice. These pectin-based hybrid nanofilms open perspectives for clinical trials and applications beyond Dentistry.